Search

Radiant floor heating systems have become a reference technology, but their use for cooling purposes has proven inconvenient in many applications due to their reduced cooling capacity and condensation issues. Nonetheless, potentialities and drawbacks of radiant floor cooling systems have been frequently addressed and simulated, given the large potential advantages of employing a single emissive system for all seasons. This paper aims to provide a comprehensive review of the modeling methods for radiant floor cooling systems proposed in scientific papers and also used in simulation software and technical standards. Models are classified according to their characterizing features, and the distinctive contributions of each method are discussed. Additionally, the modeling of the most relevant phenomena affecting floor performance is further discussed. The review revealed the presence of two main modeling classes, one only focusing on the floor's conductive heat transfer and the other integrating active floor analysis within the building's energy model of the thermal zone. Despite the presence of many modeling methods that are able to consider the most important effects in the radiant cooling system operation, not all the phenomena present in a practical application are fully described. Therefore, there is an ongoing need for more comprehensive, possibly easily characterizable, modeling approaches. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic is changing the way individuals, worldwide, feel about staying in public indoor spaces. A strict control of indoor air quality and of people’s presence in buildings will be the new normal, to ensure a healthy and safe environment. Higher ventilation rates with fresh air are expected to be a requirement, especially in educational buildings, due to their high crowding index and social importance. Yet, in this framework, an increased use of primary energy may be overlooked. This paper offers a methodology to efficiently manage complex HVAC systems in educational buildings, concurrently considering the fundamental goals of occupants’ health and energy sustainability. The proposed fourstep procedure includes: dynamic simulation of the building, to generate synthetic energy loads; clustering of the energy data, to identify and predict typical building use profiles; day-ahead planning of energy dispatch, to optimize energy efficiency; dynamic adjustment of air changes, to guarantee a safe indoor air quality. Clustering and forecasting energy needs are expected to become particularly effective in a highly regulated context. The technique has been tested on two university classroom buildings, considering pre-lockdown attendance. This notwithstanding, quality and significance of the obtained thermal energy clusters push towards a benchmark post-pandemic application.

The electric wind produced by corona discharge of a high-voltage electrode in air is employed for destabilizing a horizontal water film. In wire-to-plane geometry, the phenomenon is characterised by current versus voltage curves and visual observations of the onset of free-surface oscillations. The effect of the following parameters is examined for both positive and negative coronas: distance between the wire and the film (S), film thickness (h), wire diameter ([phi]) and composition, applied voltage (HV), and relative humidity (RH). The free-surface destabilisation is retarded by increasing d and [phi] and is insensitive to h in the tested range. The onset of corona discharge is predicted by Peek's law and compared with the experimentally observed threshold. In negative corona discharge, the current values are higher and the film is destabilised at lower HV than in positive polarity. Humidity tends to decrease the corona current at a given HV. Correlations are proposed for the current-voltage curves, in terms of the mean electric field in the inter-electrode gap and of RH, satisfactorily agreeing with the experimental data. Both positive and negative corona currents turn out to be stable for days of operation. The power loss by corona discharge is in any case lower than 12 W. Wave induction on the liquid-gas interface can effectively enhance heat and mass exchange between the two phases. Index Terms--Corona discharge, ionic wind, thin liquid films, free-surface waves, wire-to-plane geometry, current-voltage characteristics, humidity effects.

Space cooling is currently the fastest-growing end-user in buildings. The global warming trend combined with increased population and economic development will lead to accelerated growth in space cooling in the future, especially in China. The hot summer and cold winter (HSCW) zone is the most densely populated and economically developed region in China, but with the worst indoor thermal environment. Relatively few studies have been conducted on the actual measurements in the optimization of insulation design under typical intermittent cooling modes in this region. This case study was conducted in Chengdu—the two residences selected were identical in design, but the south bedroom of the case study residence had interior insulation (inside insulation on all opaque interior surfaces of a space) retrofitted in the bedroom area in 2017. In August 2019, a comparative on-site measurement was done to investigate the effect of the retrofit work under three typical intermittent cooling patterns in the real-life scenario. The experimental result shows that interior insulation provides a significant improvement in energy-saving and the indoor thermal environment. The average energy savings in daily cooling energy consumption of the south bedroom is 42.09%, with the maximum reaching 48.91%. In the bedroom with interior insulation retrofit, the indoor temperature is closer to the set temperature and the vertical temperature difference is smaller during the cooling period; when the air conditioner is off, the room remains a comfortable temperature for a slightly longer time. [ABSTRACT FROM AUTHOR]

A modelling approach based on the Substitutive Coefficients Network (SCN) is developed to predict the thermal behavior of a system in the dynamic state-space, without requiring knowledge of the thermal mass. The method can apply either to large- (building, combined solar systems, geothermal energy, and thermodynamic installations) or to small-scale systems (heat exchangers, electronic devices cooling systems, and Li-ion batteries). This current method is based on a dimensionless formulation of the simplified dynamic thermal balance model, using relaxation time as a key parameter to establish the model. The introduction of relaxation time reduces the parameters set as guidance coefficients. The parameters are finally expressed by a combination of global heat transfer coefficients related to each layer and/or sub-layer of the system. Advantages of the method are reliability, "non-destructibility", i.e., it allows a reliable prediction of the thermal behavior which experimentally is inaccessible, and reducibility of the parameters size estimate. Additionally, the method is inexpensive in terms of computation memory. It is also easy to implement in practical numerical schemes. In this paper, the method leads to a simplified mathematical model that predicts the thermal behavior of a mono-zone eco-cottage building installed at Lorraine University (in Longwy, France) as a case study. Thermal performance of the building is estimated under the hourly weather conditions onsite, as obtained from the Meteonorm software. The thermal dynamics within hourly Typical Meteorological Year 2 (TMY2) Meteonorm data disturbances and the internal heating input state in the winter period were simulated with a simplified numerical discretization method. Results provide a general dynamic state of the different sub-components of the system, with limited design of the model parameters. [ABSTRACT FROM AUTHOR]

This paper analyzes the use of hybrid photovoltaic/thermal (PVT) collectors in nearly zero-energy buildings (NZEBs). We present a design methodology based on the dynamic simulation of the whole energy system, which includes the building energy demand, a reversible heat pump as generator, the thermal storage, the power exchange with the grid, and both thermal and electrical energy production by solar collectors. An exhaustive search of the best equipment sizing and design is performed to minimize both the total costs and the non-renewable primary energy consumption over the system lifetime. The results show that photovoltaic/thermal technology reduces the non-renewable primary energy consumption below the nearly zero-energy threshold value, assumed as 15 kWh/(m2·yr), also reducing the total costs with respect to a non-solar solution (up to 8%). As expected, several possible optimal designs exist, with an opposite trend between energy savings and total costs. In all these optimal configurations, we figure out that photovoltaic/thermal technology favors the production of electrical energy with respect to the thermal one, which mainly occurs during the summer to meet the domestic hot water requirements and lower the temperature of the collectors. Finally, we show that, for a given solar area, photovoltaic/thermal technology leads to a higher reduction of the non-renewable primary energy and to a higher production of solar thermal energy with respect to a traditional separate production employing photovoltaic (PV) modules and solar thermal (ST) collectors. [ABSTRACT FROM AUTHOR]