Search

A new calculation approach is suggested to the fatigue life evaluation of notched specimens under multiaxial variable amplitude loading. Within this suggested approach, if the computed uniaxial fatigue damage by the pure torsional loading path is larger than that by the axial tension–compression loading path, a shear strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage; otherwise, an axial strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage. Furthermore, the presented method employs shear strain‐based and axial strain‐based multiaxial fatigue damage parameters in substitution of equivalent strain amplitude to consider the influence of nonproportional additional hardening. The experimental data of GH4169 superalloy and 7050‐T7451 aluminium alloy notched components are used to illustrate the presented multiaxial fatigue lifetime estimation approach for notched components, and the results reveal that estimations are accurate. [ABSTRACT FROM AUTHOR]

An innovative numerical methodology is presented for fatigue lifetime estimation of notched bodies experiencing multiaxial cyclic loadings. In the presented methodology, an evaluation approach of the local nonproportionality factor F for notched specimens, which defines F as the ratio of the pseudoshear strain range at 45° to the maximum shear plane and the maximum shear strain range, is proposed and discussed deeply. The proposed evaluation method is incorporated into the material cyclic stress‐strain equation for purpose of describing the nonproportional hardening behavior for some material. The comparison between multiaxial elastic‐plastic finite element analysis (FEA) and experimentally measured strains for S460N steel notched specimens shows that the proposed nonproportionality factor estimation method is effective. Subsequently, the notch stresses and strains calculated utilizing multiaxial elastic‐plastic FEA are used as input data to the critical plane‐based fatigue life prediction methodology. The prediction results are satisfactory for the 7050‐T7451 aluminum alloy and GH4169 superalloy notched specimens under multiaxial cyclic loading. [ABSTRACT FROM AUTHOR]

Based on the isothermal fatigue and creep damage, a life prediction approach under multiaxial thermo-mechanical loading was proposed in this investigation. In the proposed method, the multiaxial thermo-mechanical fatigue damage during one cycle period was divided into the isothermal fatigue damage and the creep damage. In order to evaluate conservatively, the isothermal fatigue damage during one cycle period was calculated by using multiaxial fatigue damage model at the maximum temperature during the whole period, and the creep damage during one cycle period was calculated by accumulating the creep damage of all portions originated from the divided time history for the axial load component and temperature history. The life prediction results by the proposed model showed a good agreement with experimental data for nickel-base alloy GH4169 and cobalt-base Haynes188 under axial-torsional thermo-mechanical loading. [ABSTRACT FROM AUTHOR]