Search

The authors make the following corrections to the published paper [...]

We propose a full-color see-through three-dimensional (3D) display method based on volume holography. This method is based on real object interference, avoiding the device limitation of spatial light modulator (SLM). The volume holography has a slim and compact structure, which realizes 3D display through one single layer of photopolymer. We analyzed the recording mechanism of volume holographic gratings, diffraction characteristics, and influencing factors of refractive index modulation through Kogelnik’s coupled-wave theory and the monomer diffusion model of photopolymer. We built a multiplexing full-color reflective volume holographic recording optical system and conducted simultaneous exposure experiment. Under the illumination of white light, full-color 3D image can be reconstructed. Experimental results show that the average diffraction efficiency is about 53%, and the grating fringe pitch is less than 0.3 μm. The reconstructed image of volume holography has high diffraction efficiency, high resolution, strong stereo perception, and large observing angle, which provides a technical reference for augmented reality.

A new double-layer sunlight concentration system, where each layer is divided into two regions, is proposed, and the system has four volume holograms. Since the four holograms convert light in different directions, the interlayer crosstalk is reduced, and the system has a high concentration ratio. The simulation results show that the concentration system can achieve a 30° operation angle range. The holograms are fabricated on photopolymer substrates, and the left half of the system is implemented using two holograms. The characteristics of the left half of the system are assessed. The agreement of the simulation and experimental results on diffraction efficiency validates the proposed method. The tested monochromatic concentration ratio can achieve a record of 418.8, and the concentration ratio under sunlight is 5.38. The experiment results of light use efficiency are close to the simulation with non-crosstalk, which indicates that the interlayer crosstalk is small.

Efficient and low-cost solar-energy collection has become the focus of many research works. This paper proposes a recording method and an experimental verification of a wide-band, large-angle, and high concentration-ratio volume-holographic grating for solar concentration. We applied the Kogelnik coupled-wave theory and photopolymer diffusion model to analyse the formation mechanism and influencing factors on the diffraction efficiency of monochromatic volume-holographic gratings. We design and construct a three-color laser-interference system to record three monochromatic volume-holographic gratings. The best recording conditions are determined by experiment and simulation. A trichromatic volume-holographic grating is obtained by gluing the three monochromatic gratings together. The experimental results show that the trichromatic volume-holographic grating with a working angle of 6.7° and a working band of visible light has a light concentration ratio of 149.2 under an illumination of the combined recorded three-color beams, and that under sunlight is 27.2. We find that the proposed trichromatic volume-holographic grating for light concentration offers the advantages of wide band and high light concentration ratio, which provide a reference for solar concentration.