Search

The feasibility of laser isotope separation of 102 Pd through pulsed laser optical pumping followed by isotope selective photoionization has been studied through density matrix formalism. The effect of various parameters such as bandwidth of the excitation lasers, intensity of the lasers and Doppler broadening of the atomic ensemble on the efficiency of optical pumping and isotope selective photoionization have been evaluated. The optimum number density in the laser-atom interaction region has been derived from the studies of the effect of charge exchange collisions on the degree of enrichment. It has been shown that it is possible to enrich 102 Pd up to ~ 23.7% at a production rate of 1.1 mg /h. The achievable degree of enrichment through this photoionization scheme is higher than the previously reported laser isotope separation process. The radionuclidic purity of the irradiated enriched mixture has been found to be suitable for medical applications., (© 2024. The Author(s).)

A three-step photoionization has been theoretically studied for the laser isotope separation of 223 Ra through the following photoionization scheme. [Formula: see text] The effect of bandwidth, peak power density of the excitation and ionization lasers, Doppler broadening of the atomic ensemble, number density of the atoms, and charge exchange collisions on the laser isotope separation process has been studied. The optimum system parameters for the separation of 223 Ra through this photoionization scheme have been derived. The effect of unknown parameters on the degree of enrichment has also been discussed. It has been theoretically shown that it is possible to produce 223 Ra isotope with 98.5% radio-isotopic purity at a rate of 0.74 μg/h corresponding to the production rate of 435 patient doses per hour. This is the first ever study on the laser isotope separation of Radium isotopes., (© 2023. The Author(s).)

A 562 nm-627 nm-597 nm three-step resonant photoionization scheme has been studied using the density matrix formalism for the enrichment of 150 Nd in weighable quantities for the neutrinoless double-beta decay detection. The effect of bandwidth of the excitation laser and charge exchange collisions, on the production rates and degree of enrichment has also been studied. Optimum conditions for the efficient enrichment of 150 Nd isotope have been derived. It has been shown that it might be possible to produce 50 kg of 66% enriched 150 Nd isotope in about five months (16 h/day) using the conditions derived through this investigation. This enables to reach the 0νββ decay half-life limit of ≈ 1.8 × 10 25  year for the 150 Nd isotope., (© 2022. The Author(s).)

We propose a novel and simple method for the laser isotope separation of 176 Lu a precursor for the production of 177 Lu medical isotope. The physics of the laser-atom interaction has been studied through the dynamics of the atomic level populations using the density matrix formalism. It has been shown that a combination of cw excitation lasers and pulsed ionization laser can be used for the laser isotope separation of 176 Lu. The optimum conditions for the efficient and selective separation of 176 Lu have been derived by studying the time evolution of level population under laser excitation. It has also been shown that, it might be possible to produce ~ 100% enriched 176 Lu isotope at a rate of 5 mg/h, which is higher than all previously reported methods so far. The isotope separation process proposed can be easily adopted using off-the-shelf lasers, for similar atomic systems., (© 2021. The Author(s).)

A new photoionization scheme accessible by Rhodamine dye lasers is proposed for the isotope separation of 176 Lu.[Formula: see text][Formula: see text] Optimum conditions for the laser isotope separation have been theoretically computed and compared with the previously reported work. The enrichment of ~ 63% can be obtained with > 22 mg/h production rate even when broadband lasers with bandwidth of 500 MHz are employed for the two step excitation. The simplified system requirements for the photoionization scheme combined with a high production rate of 176 Lu than previously reported is expected to reduce the global shortage of 176 Lu isotope for medical applications.

A novel, rapid, and sensitive ultra-performance liquid chromatography (UPLC) method has been developed and validated as per ICH guidelines for the determination of tramadol HCl impurities in the tramadol HCl injection after reconstitution by infusion fluids (5% dextrose and 0.9% sodium chloride). The tramadol HCl injection is for the treatment of patients with moderate-to-severe pain. The stability of the reconstituted solution is critical before intravenous injection. The literature search resulted in few published articles on assays of tramadol in infusion fluids by conventional HPLC. No attempts have yet been made to determine the impurities in infusion fluids, as the concentration of tramadol after reconstitution is extremely low (0.4 mg/mL) and that of impurities is even lower. The proposed method is novel as it allows the quantitation of the impurities of tramadol HCl and is based on modern chromatographic techniques like UPLC. The method was developed using the Waters Acquity BEH C18 column with a mobile phase consisting of a gradient mixture of solvent A (trifluroacetic acid buffer) and solvent B (methanol: acetonitrile). The model stability study was designed by diluting the tramadol HCl injection in the 5% dextrose injection and 0.9% sodium chloride injection. Each mixture was kept under storage at room temperature (25 ± 2°C) for testing at initial, 2, 4, 8, 12, 18 & 24 hours. The validation study illustrates that the proposed method is suitable for the determination of tramadol and its impurities. The proposed method makes use of the LC-MS-compatible mobile phase. It can be useful for the determination of tramadol HCl and its impurities in plasma samples and other pharmaceutical dosage forms.

A novel approach was used to develop and validate a rapid, specific, accurate and precise reverse phase ultra performance liquid chromatographic (UPLC) method for the simultaneous determination of Sitagliptin phosphate monohydrate and Metformin hydrochloride in pharmaceutical dosage forms. The chromatographic separation was achieved on Aquity UPLC BEH C8 100 × 2.1 mm, 1.7 μm, column using a buffer consisting of 10 mM potassium dihydrogen phosphate and 2 mM hexane-1-sulfonic acid sodium salt (pH adjusted to 5.50 with diluted phosphoric acid) and acetonitrile as organic solvent in a gradient program. The flow rate was 0.2 mL min(-1) and the detection wavelength was 210 nm. The limit of detection (LOD) for Sitagliptin phosphate monohydrate and Metformin hydrochloride was 0.2 and 0.06 μg mL(-1), respectively. The limit of quantification (LOQ) for Sitagliptin phosphate monohydrate and Metformin hydrochloride was 0.7 and 0.2 μg mL(-1), respectively. This method was validated with respect to linearity, accuracy, precision, specificity and robustness. The method was also found to be stability-indicating.

An improved gradient, reversed-phase liquid chromatographic (RP-LC) method was developed and subsequently validated for the determination of Loratadine and its impurities/degradation products in pharmaceutical drug substance. Separation was achieved with Inertsil ODS-3V, 250 × 4.6 mm, 5μ column with gradient elution at a flow rate of 1.0 mL min(-1). UV detection was performed at 220 nm. The described method is linear over a range of LOQ (0.044, 0.088, 0.084, and 0.072 μg mL(-1) for impurity-B, impurity-C, impurity-D, and impurity-E respectively) to 1.2 μg mL(-1) (0.6 μg mL(-1) of the specification limit) for all the impurities and degradation products. The recovery of impurities were found to be in the range of 85-115 %. The method is simple, selective, and accurate for the quantification of impurities and degradation products of Loratadine in its bulk drug samples.

Seven schemes are studied theoretically for Doppler-free two-photon excitation of rare (41)Ca isotope using single-mode continuous-wave lasers. The ionization efficiencies and optical selectivities for all the schemes are calculated for various powers of the excitation and ionization lasers and for various focusing conditions of the two lasers. To maximize the ionization efficiencies and the optical selectivities, wavelength-dependent Stark compensation is used. Certain laser wavelengths of the ionization step termed as magic wavelengths are identified for compensating the Stark shift induced by the excitation laser. The effects of the Stark-shift-induced asymmetry and its reversal by selecting the appropriate magic wavelength for the ionization step for various excitation and ionization laser intensities are investigated. The ionization efficiency and optical selectivity for the best scheme after Stark compensation are found to be 8.4 x 10(-4) and approximately 9 x 10(3), respectively.

Molecularly imprinted polymers (MIPs) known as plastic antibodies (PAs) represent a new class of materials possessing high selectivity and affinity for the target molecule. Since their discovery, PAs have attracted considerable interest from bio- and chemical laboratories to pharmaceutical institutes. PAs are becoming an important class of synthetic materials mimicking molecular recognition by natural receptors. In addition, they have been utilized as catalysts, sorbents for solid-phase extraction, stationary phase for liquid chromatography and mimics of enzymes. In this paper, first time we report the preparation and characterization of a PA for the recognition of blistering chemical warfare agent sulphur mustard (SM). The SM imprinted PA exhibited more surface area when compared to the control non-imprinted polymer (NIP). In addition, SEM image showed an ordered nano-pattern for the PA of SM that is entirely different from the image of NIP. The imprinting also enhanced SM rebinding ability to the PA when compared to the NIP with an imprinting efficiency (alpha) of 1.3.