Search

Five genes (mxbDM, mxcQE and mxaB) are responsible for the transcription of methanol oxidation genes in Methylobacterium strains. Among these, MxbDM and MxcQE constitute the two-component system (TCS) regulating methanol metabolism. In this study, we integrated the methanol-sensing domain of MxbD and MxcQ with the EnvZ/OmpR from Escherichia coli. The domain-swapping strategy resulted in chimeric histidine kinases (HK’s) MxbDZ and MxcQZ AM1 containing recombinant E. coli. Real-time quantitative PCR was used to monitor OmpC expression mediated by the chimeric HK and response regulator (RR) OmpR. Further, an ompC promoter based fluorescent biosensor for sensing methanol was developed. GFP fluorescence was studied both qualitatively and quantitatively in response to environmental methanol. GFP measurement also confirmed ompC expression. Maximum fluorescence was observed at 0.05% methanol and 0.01% methanol using MxbDZ and MxcQZ AM1, respectively. Thus the chimeric HK containing E. coli were found to be highly sensitive to methanol, resulting in a rapid response making them an ideal sensor.

We investigated the effect of cell-surface display of glutamate decarboxylase (GadB) on gamma-aminobutyric acid (GABA) production in recombinant Escherichia coli. We integrated GadB from the hyperthermophilic, anaerobic archaeon Pyrococcus horikoshii to the C-terminus of the E. coli outer membrane protein C (OmpC). After 12 hr of culturing GadB-displaying cells, the GABA concentration in the extracellular medium increased to 3.2 g/l, which is eight times that obtained with cells expressing GadB in the cytosol. To further enhance GABA production, we increased the temperatures of the culture. At 60°C, the obtained GABA concentration was 4.62 g/l after 12 hr of culture, and 5.35 g/l after 24 hr, which corresponds to a yield of 87.7%.

In this study, we tested whether biodiesel could be used as a feedstock for the microbial synthesis of sophorolipid, a high value-added chemical. Sophorolipid was successfully produced from Starmerrella bombicola using biodiesel as a hydrophobic substrate. Fed-batch fermentation was carried out for the high-level production. Compared to flask culture, the sophorolipid production concentration significantly increased from 58.1 ​g/L to 224.2 ​g/L (an approximate increase of 386%) using fed-batch fermentation, which is the highest value ever reported using fatty acid methyl esters and fatty acid ethyl esters as hydrophobic substrates. Different from rapeseed oil-based sophorolipid (ROSL), the biodiesel-based sophorolipid (BDSL) contained a new type of sophorolipid called esterified sophorolipid (approximately 19.8%). The BDSL demonstrated better surface-active properties, lower surface tension (34.2 vs. 35.8 ​mN/m, respectively), and a decreased critical micelle concentration (25.1 vs. 26.3 ​mg/L, respectively) compared to the ROSL. Given these results, the BDSL is expected to be used in various industrial fields where vegetable oil-based sophorolipids, the commercialized forms of sophorolipids, have been used. To our knowledge, this is the first report to describe the conversion of biodiesel for the production of a high value-added chemical.

Lactobionic acid (LBA) has been widely used in the food, pharmaceutical, and cosmetic industries. Pseudomonas taetrolens is an efficient LBA-producing bacterium. To improve the LBA-production ability of P. taetrolens, we modified the strain by genetic engineering. We performed homologous expression of the quinoprotein glucose dehydrogenase gene in P. taetrolens and measured the intracellular lactose-oxidizing activity and LBA production titer. In flask cultures at 12 h of incubation, the intracellular lactose oxidizing activity (0.159 U/g dry weight cell) and LBA production titer (77.2 g/L) of the recombinant P. taetrolens were approximately 118 % and 69 % higher than those (0.073 U/g dry weight cell and 45.8 g/L, respectively) of wild-type P. taetrolens. Using this recombinant strain as a whole-cell biocatalyst (WCB), the effects of reaction parameters, such as reaction temperature, cell density, and cell harvest time, were investigated on LBA production. Under optimized reaction conditions, the LBA production titer, yield, and productivity of WCB were 200 g/L, 95.6 %, and 16.7 g/L/h, respectively. Compared with our previous study, LBA production titer, yield, and productivity, which are key factors for industrial LBA production, were significantly improved by fermentation of wild-type P. taetrolens. Moreover, the reaction for LBA production could be performed up to seven times without a significant reduction in productivity, implying that this WCB was rather robust. Our results suggest that the utilization of whole-cell biocatalysis using recombinant P. taetrolens provides a potential solution to achieve economically feasible production of LBA.

In this study, constructed Escherichia coli could efficiently adsorb fenitrothion by displaying a pesticide-binding peptide on it using the anchoring motif OmpC. A codon-optimized, pesticide-binding peptide was attached to the C-terminus of OmpC at loop 7 (993 bp). The efficiency of fenitrothion binding by the monomer peptide was evaluated under different temperatures, pH levels, and fenitrothion concentrations. To enhance fenitrothion adsorption, a dimer of pesticide-binding peptide was also constructed and displayed. Compared with the peptide monomer, the dimer-displaying strain showed superior fenitrothion-binding ability. The performance of the strains was evaluated in artificial polluted soil, and their morphology was analyzed by FE-SEM. The results showed that these two kinds of constructed strains can adsorb fenitrothion in contaminated environments with no cellular activity reduction. ARTICLE INFO.

Bio-based production of industrially important chemicals provides an eco-friendly alternative to current petrochemical-based processes. Because of the limited supply of fossil fuel reserves, various technologies utilizing microbial host strains for the sustainable production of platform chemicals from renewable biomass have been developed. Corynebacterium glutamicum is a non-pathogenic industrial microbial species traditionally used for L-glutamate and L-lysine production. It is a promising species for industrial production of bio-based chemicals because of its flexible metabolism that allows the utilization of a broad spectrum of carbon sources and the production of various amino acids. Classical breeding, systems, synthetic biology, and metabolic engineering approaches have been used to improve its applications, ranging from traditional amino-acid production to modern biorefinery systems for production of value-added platform chemicals. This review describes recent advances in the development of genetic engineering tools and techniques for the establishment and optimization of metabolic pathways for bio-based production of major C2-C6 platform chemicals using recombinant C. glutamicum.

In a cell-surface display (CSD) system, successful display of a protein or peptide is highly dependent on the anchoring motif and the position of the display in that anchoring motif. In this study, a recombinant bacterial CSD system for manganese (Mn) and cobalt (Co) recovery was developed by employing OmpC as an anchoring motif on three different external loops. A portion of Cap43 protein (TRSRSHTSEG)3 was employed as a manganese and cobalt binding peptide (MCBP), which was fused with OmpC at three different external loops. The fusions were made at the loop 2 [fusion protein-2 (FP2)], loop 6 (FP6), and loop 8 (FP8) of OmpC, respectively. The efficacy of the three recombinant strains in the recovery of Mn and Co was evaluated by varying the concentration of the respective metal. Molecular modeling studies showed that the short trimeric repeats of peptide probably form a secondary structure with OmpC, thereby giving rise to a difference in metal recovery among the three recombinant strains. Among the three recombinant strains, FP6 showed increased metal recovery with both Mn and Co, at 1235.14 (1 mM) and 379.68 (0.2 mM) µmol/g dry cell weight (DCW), respectively.

Gamma-aminobutyric acid is a precursor of nylon-4, which is a promising heat-resistant biopolymer. GABA can be produced from the decarboxylation of glutamate by glutamate decarboxylase. In this study, a synthetic scaffold complex strategy was employed involving the Neurospora crassa glutamate decarboxylase (GadB) and Escherichia coli GABA antiporter (GadC) to improve GABA production. To construct the complex, the SH3 domain was attached to the N. crassa GadB, and the SH3 ligand was attached to the N-terminus, middle, and C-terminus of E. coli GadC. In the C-terminus model, 5.8 g/l of GABA concentration was obtained from 10 g/l glutamate. When a competing pathway engineered strain was used, the final GABA concentration was further increased to 5.94 g/l, which corresponds to 97.5% of GABA yield. With the introduction of the scaffold complex, the GABA productivity increased by 2.9 folds during the initial culture period.

Escherichia coli was engineered to sense methanol by employing a chimeric two-component system (TCS) strategy. A chimeric MxaY/EnvZ (MxaYZ) TCS was constructed by fusing the Paracoccus denitrificans MxaY with the E. coli EnvZ. Real-time quantitative PCR analysis and GFP-based fluorescence analysis showed maximum transcription of ompC and the fluorescence at 0.01% of methanol, respectively. These results suggested that E. coli was successfully engineered to sense methanol by the introduction of chimeric MxaYZ. By using this strategy, various chimeric TCS-based bacterial biosensors can be constructed and used for the development of biochemical-producing recombinant microorganisms.

Background Posterior reversible encephalopathy syndrome (PRES) is a neurological complication caused by cerebral hyperperfusion. Case Report A 46-year-old male presented with decreased mental status, left facial palsy, and left-sided weakness after video-assisted thoracoscopic surgery for a solitary pulmonary nodule. During the surgery, phenylephrine was infused intravenously for general anesthesia-induced hypotension. High signal intensity at the right parietooccipital lobe was noted on fluid-attenuated inversion recovering imaging and diffusion-weighted imaging. His neurological symptoms improved two days after initial presentation. Follow-up diffusion-weighted imaging showed resolution of the brain lesions 10 days after the surgery. Conclusions We report a patient who presented with PRES after administration of phenylephrine during resection of a solitary pulmonary nodule. PRES should be considered for patients presented with acute neurologic symptoms following surgical procedures.

Gamma-aminobutyric acid (GABA) is a non-protein amino acid, which is an important inhibitor of neurotransmission in the human brain. GABA is also used as the precursor of biopolymer Nylon-4 production. In this study, the carbon flux from the tricarboxylic acid cycle was directed to the GABA shunt pathway for the production of GABA from glucose. The GABA shunt enzymes succinate-semialdehyde dehydrogenase (GabD) and GABA aminotransferase (GabT) were co-localized along with the GABA transporter (GadC) by using a synthetic scaffold complex. The co-localized enzyme scaffold complex produced 0.71 g/l of GABA from 10 g/l of glucose. Inactivation of competing metabolic pathways in mutant E. coli strains XBM1 and XBM6 increased GABA production 13% to reach 0.80 g/l GABA by the enzymes co-localized and expressed in the mutant strains. The recombinant E. coli system developed in this study demonstrated the possibility of the pathway of the GABA shunt as a novel GABA production pathway.

The expression of anti-freeze proteins (AFPs) on the Escherichia coli using the cell surface display (CSD) strategy was investigated to determine the feasibility of the method as a potential application of kinetic hydrate inhibitors. Monomers to hexamers of type II and III AFPs were displayed on the surfaces of bacterial cells. The kinetic inhibition performance of the AFPs on the synthetic natural gas hydrate formation was tested. The displayed AFPs exhibited higher KHI effectiveness with the increase in the number of peptides attached to the cells. In addition, best KHI performance of the AFPs could be achieved with higher dosages of the cultures when the concentration of the inducer is optimized, regardless of AFP type. Only a small portion of AFPs in the cell cultures exhibited considerable KHI performance, which implies that the CSD could be an effective strategy, reducing the cost for the production and purification of the AFPs.

Gamma-aminobutyric acid (GABA) is an important bio-product, which is used in pharmaceutical formulations, nutritional supplements, and biopolymer monomer. The traditional GABA process involves the decarboxylation of glutamate. However, the direct production of GABA from glucose is a more efficient process. To construct the recombinant strains of Escherichia coli, a novel synthetic scaffold was introduced. By carrying out the co-localization of glutamate synthase, glutamate decarboxylase, and GABA transporter, we redirected the TCA cycle flux to GABA pathway. The genetically engineered E. coli strain produced 1.08 g/L of GABA from 10 g/L of initial glucose. Thus, with the introduction of a synthetic scaffold, we increased GABA production by 2.2-fold. The final GABA concentration was increased by 21.8 % by inactivating competing pathways.

Escherichia coli were engineered for the direct production of gamma-aminobutyric acid from glucose by introduction of synthetic protein scaffold. In this study, three enzymes consisting GABA pathway (isocitrate dehydrogenase, glutamate synthase and glutamate decarboxylase) were connected via synthetic protein scaffold. By introduction of scaffold, 0.92g/L of GABA was produced from 10g/L of glucose while no GABA was produced in wild type E. coli. The optimum pH and temperature for GABA production were 4.5 and 30°C, respectively. When competing metabolic network was inactivated by knockout mutation, maximum GABA concentration of 1.3g/L was obtained from 10g/L glucose. The recombinant E. coli strain which produces GABA directly from glucose was successfully constructed by introduction of protein scaffold.

Cystenine–functionalized graphene quantum dots (cys–GQDs) were synthesized by a simple and facile method, which involves chemical bond formation between L-cysteine and the graphene quantum dots (GQDs) prepared by the carbonization of citric acid. The obtained cys–GQDs show a strong green fluorescence and a uniform lateral size distribution with high crystallinity. The cys–GQDs are further demonstrated as highly sensitive and selective fluorescence probes for Hg2+. In the Hg2+ detection process, the cys–GQDs shows significant fluorescence quenching through a charge transfer process within the cys–GQDs and Hg2+ complex.

A ZraP-based lead sensing and removal system was constructed in E. coli. It was regulated by the ZraS/ZraR two-component system. The expression profile of the zraP gene towards extracellular lead was studied via real-time PCR. A dual-function bacterial system was also designed to express GFP and OmpC-lead binding peptide under the control of zraP for the simultaneous sensing and adsorption of environmental lead without additional manipulation. The constructed bacterial system can emit fluorescence and it adsorbed a maximum of 487 µmol lead/g cell DCW. From a study of artificial wastewater, the constructed bacteria adsorbed lead highly selectively (427 µmol lead/g cell DCW) among other metal ions. The newly-constructed dual function bacterial system can be applied for the development of an efficient process for the removal of lead from polluted wastes.

As the concerns about environmental problems, climate change and limited fossil resources increase, bio-based production of chemicals and polymers from renewable resources gains much attention as one of the promising solutions to deal with these problems. To solve these problems, much effort has been devoted to the development of sustainable process using renewable resources. Recently, many chemicals and polymers have been synthesized by biorefinery process and these bio-based chemicals and plastics have been suggested as strong candidates to substitute petroleum-based products. In this review, we discuss current advances on the development of metabolically engineered microorganisms for the efficient production of bio-based chemicals and polymers.

Most postoperative maxillary cysts develop more than 10 years after a Caldwell-Luc operation. They can manifest with cheek pain, swelling and dental and visual symptoms. Brain imaging should be performed to distinguish trigeminal nerve compression from various other possible causes. It should be treated by surgical intervention to relieve the above-mentioned symptoms. We report a patient who presented with compressive trigeminal neuropathy caused by a postoperative maxillary cyst. J Korean Neurol Assoc 33(3):206-208, 2015

For the selection of peptide specifically binding to Pb2+, the biopanning with the commercially available Ph.D.-7 phage displayed heptapeptide library was carried out against Pb2+ immobilized on a metal-chelating IDA (iminodiacetic acid) resin. After four rounds of screening against Pb 2+ -IDA including negative selections against charged bead with metal ions other than Pb2+ and uncharged bead, several candidate leadbinding phage peptides were initially determined based on the order of frequency from the screened phage clones. Of the selected phage peptide sequences, the peptide of the highest frequency, CysSerIleArgThrLeuHisGlnCys (CSIRTLHQC) also exhibited the strongest affinity for Pb 2+ in binding assays for individual phage clones. However, there was not a significant difference in Pb2+ affinity between selected peptides when using synthetic heptapeptides corresponding to the displayed peptide sequences of phage clones.

Two-component system (TCS)-based bacterial zinc and copper biosensors, in which green fluorescent protein (GFP) is expressed under the control of zraP and cusC promoter in ZraS/R and CusS/R TCS, were evaluated in artificial wastewater. Bacterial biosensors developed in this study efficiently expressed GFP by the recognition of Zn 2+ and Cu 2+ in artificial wastewater. Secondly, TCS-based zinc and copper removing bacteria with the peptide displayed on cell surface were examined in artificial wastewater. Zinc and copper removing bacteria expressed the peptide as a fusion protein such as OmpC-ZBP (zinc binding peptide) and OmpC-CBP (copper binding peptide) on the cell surface when sensing exogenous Zn 2+ and Cu 2+ through ZraS/R and CusS/R TCS. The recombinant cell expressing metal-adsorbing peptide could efficiently remove copper and zinc (15 and 18 mg/g dry cell weight, respectively) in artificial wastewater. Therefore, it was demonstrated that the TCS-based recombinant cell for the recognition or removal of heavy metal functions well in artificial wastewater environment.

The CusSR two-component system (TCS) is a copper-sensing apparatus of E. coli that is responsible for regulating the copper-related homeostatic system. The dynamic characteristics of the CusSR network were modified by the introduction of a positive feedback loop. To construct the feedback loop, the CusR, which is activated by the cusC promoter, was cloned downstream of the cusC promoter and reporter protein. The feedback loop system, once activated by environmental copper, triggers the activation of the cusC promoter, which results in the amplification of a reporter protein and CusR expression. The threshold copper concentration for the activation of the modified CusSR TCS network was lowered from 2,476.5 μg/l to 247.7 μg/l, which indicates a tenfold increase in sensitivity. The intensity of the output signal was increased twofold, and was maintained for 16 h. The strategy proposed in this study can also be applied to modify the dynamic characteristics of other TCSs.

The purpose of this study is to find the operational characteristics of nitrifier-dominated membrane bioreactor (MBR), which has been extensively studied for organic removal, especially in terms of nitrite (NO 2 -N) build-up and membrane fouling. Membrane fouling is one of the important factor which determines the economics of MBR system. The characteristics of membrane fouling was monitored in terms of the fouling indices such as sludge volume index (SVI), the concentration of total organic carbon (TOC) and extracellular polymeric substances (EPS) in a membrane permeate or sludge extract, the absorbance of supernatant at 260 nm. Most of index values except for protein concentration in EPS had a close relation with the increase of suction pressure and SVI value. Nitrifying MBR was superior to the conventional organic-oxidizing MBR in terms of membrane fouling since the fouling index value of nitrifying MBR was lower than that of BOD-oxidizing MBR. Key Words : Membrane bioreactor, Fouling, Wastewater, Nitrification

Bacterial pathogenesis requires the precise spatial and temporal control of gene expression, the dynamics of which are controlled by regulatory networks. A network encoded within Salmonella Pathogenicity Island 1 controls the expression of a type III protein secretion system involved in the invasion of host cells. The dynamics of this network are measured in single cells using promoter-green fluorescent protein (gfp) reporters and flow cytometry. During induction, there is a temporal order of gene expression, with transcriptional inputs turning on first, followed by structural and effector genes. The promoters show varying stochastic properties, where graded inputs are converted into all-or-none and hybrid responses. The relaxation dynamics are measured by shifting cells from inducing to noninducing conditions and by measuring fluorescence decay. The gfp expressed from promoters controlling the transcriptional inputs (hilC and hilD) and structural genes (prgH) decay exponentially, with a characteristic time of 50-55 min. In contrast, the gfp expressed from a promoter controlling the expression of effectors (sicA) persists for 110+/-9 min. This promoter is controlled by a genetic circuit, formed by a transcription factor (InvF), a chaperone (SicA), and a secreted protein (SipC), that regulates effector expression in response to the secretion capacity of the cell. A mathematical model of this circuit demonstrates that the delay is due to a split positive feedback loop. This model is tested in a DeltasicA knockout strain, where sicA is complemented with and without the feedback loop. The delay is eliminated when the feedback loop is deleted. Furthermore, a robustness analysis of the model predicts that the delay time can be tuned by changing the affinity of SicA:InvF multimers for an operator in the sicA promoter. This prediction is used to construct a targeted library, which contains mutants with both longer and shorter delays. This combination of theory and experiments provides a platform for predicting how genetic perturbations lead to changes in the global dynamics of a regulatory network.

To direct the carbon flux from Krebs cycle into the gamma-aminobutyric acid (GABA) shunt pathway for the production of GABA by protein scaffold introduction in Escherichia coli. Escherichia coli was engineered to produce GABA from glucose by the co-localization of enzymes succinate semialdehyde dehydrogenase (GadD), GABA aminotransferase (PuuE) and GABA transporter (GadC) by protein scaffold. 0.7 g GABA l−1 was produced from 10 g glucose l−1 while no GABA was produced in wild type E. coli. pH 6 and 30 °C were optimum for GABA production, and GABA concentration increased to 1.12 g GABA l−1 when 20 g glucose l−1 was used. When competing metabolic networks were inactivated, GABA increased by 24 % (0.87 g GABA l−1). The novel GABA production system was constructed by co-localization of GABA shunt enzymes.

The rumen represents the first section of a ruminant animal's stomach, where feed is collected and mixed with microorganisms for initial digestion. The major gas produced in the rumen is CO(2) (65.5 mol%), yet the metabolic characteristics of capnophilic (CO(2)-loving) microorganisms are not well understood. Here we report the 2,314,078 base pair genome sequence of Mannheimia succiniciproducens MBEL55E, a recently isolated capnophilic Gram-negative bacterium from bovine rumen, and analyze its genome contents and metabolic characteristics. The metabolism of M. succiniciproducens was found to be well adapted to the oxygen-free rumen by using fumarate as a major electron acceptor. Genome-scale metabolic flux analysis indicated that CO(2) is important for the carboxylation of phosphoenolpyruvate to oxaloacetate, which is converted to succinic acid by the reductive tricarboxylic acid cycle and menaquinone systems. This characteristic metabolism allows highly efficient production of succinic acid, an important four-carbon industrial chemical.

A novel succinic acid-producing bacterium was isolated from bovine rumen. The bacterium is a non-motile, non-spore-forming, mesophilic and capnophilic gram-negative rod or coccobacillus. Phylogenetic analysis based on the 16S rRNA sequence and physiological analysis indicated that the strain belongs to the recently reclassified genus Mannheimia as a novel species, and has been named Mannheimia succiniciproducens MBEL55E. Under 100% CO(2) conditions, it grows well in the pH range of 6.0-7.5 and produces succinic acid, acetic acid and formic acid at a constant ratio of 2:1:1. When M. succiniciproducensMBEL55E was cultured anaerobically in medium containing 20 g l(-1) glucose as carbon source, 13.5 g l(-1) of succinic acid was produced.

We had previously shown that succinic acid production in a pfl ldhA double mutant strain of Escherichia coli could be enhanced by amplifying the malic enzyme activity. However, recombinant E. coli NZN111 (F- Apfl::Cam ldhA::Kan) harboring pTrcML, a plasmid containing the E. coli malic enzyme gene, produced a considerable amount of malic acid along with the desired product, succinic acid. To have an insight into the intracellular metabolism, metabolic control analysis was carried out. From the results of a simulation, it was predicted that supplying additional reducing power could enhance succinic acid production. More reduced carbon substrate sorbitol was thus examined for the possibility of matching the potential during succinic acid production. When NZN111 (pTrcML) was cultured in LB medium containing 20 g sorbitol/l under a CO2 atmosphere, 10 g succinic acid/l was produced. The apparent yield of succinic acid was 1.1 g succinic acid/g sorbitol, which is 85% of the maximum theoretical yield. Therefore, it was found that redox balancing was important for the enhanced production of succinic acid in metabolically engineered E. coli.

Si-based alloy powders were studied as anode material for Li-ion battery (LIB). The Si-based alloy powders were manufactured by mechanical ball milling process. The ball milled Si-based alloy powders were incorporated graphite as a bufferring matrix to depress the volumetric change of an alloy electrode. We investigated structural and electorchemical properties of the Si-based alloy anodes. Consequently, we obtained good results having an excellent coloumbic efficiency of 85%. Also, we found not only a large initial capacity of 620mAh/g but also a high capacity retention of 90% at the 100th cycle.

The interactive inhibitory effects of pH and chloride on the catalysis of laccase from Trametes versicolor were investigated by studying the alteration of inhibition characteristics of sodium chloride at different pHs for the oxidation of 2,2``-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid). At pH 3.0, the addition of sodium chloride (50 mM) brought about a 40-fold increase in Km app and a 4-fold decrease in Vmax app. As the pH increased to 7.0, the inhibitory effects of sodium chloride became significantly weakened. The mixed-inhibition mechanism was successfully used to quantitatively estimate the competitive and uncompetitive inhibition strengths by chloride at two different pHs (pH 3.0 and 6.0). At pH 3.0, the competitive inhibition constant, Ki, was 0.35 mM, whereas the uncompetitive inhibition constant, Ki``, was 18.1 mM, indicating that the major cause of the laccase inhibition by chloride is due to the competitive inhibition step. At a higher pH of 6.0, where the inhibition of the laccase by hydroxide ions takes effect, the inhibition of the laccase by chloride diminished to a great extent, showing increased values of both the competitive inhibition constant (Ki = 23.7 mM) and uncompetitive inhibition constant (Ki`` = 324 mM). These kinetic results evidenced that the hydroxide anion and chloride share a common mechanism to inhibit the laccase activity.

Methyl (R)-2-chloromandelate, a key intermediate in the synthesis of clopidogrel, was obtained by the reduction of methyl-2-chlorobenzoylformate using whole cells of Saccharomyces cerevisiae. A 100% conversion and 96.1% of enantiomeric excess (ee) value was obtained when 17 methyl-2-chlorobenzoylformate/l was reacted with 8 g S. cerevisiae/l and 83 g glucose/l at pH 7.

DcuS/DcuR two component system (TCS) was firstly employed for the expression of the gfp gene under the dcuB gene promoter in aerobic condition to develop high throughput screening system able to screen microorganisms producing high amount of fumarate. However, the DcuS/DcuR TCS could not produce a signal strong enough to mediate the expression of the gfp gene responding fumarate concentration. Thus, DcuS/DucR TCS was engineered by recruiting the EnvZ/OmpR system, the most-studied TCS in E. coli. A chimeric DcuS/EnvZ (DcuSZ) TCS was constructed by fusing the sensor histidine kinase of DcuS with the cytoplasmic catalytic domain of EnvZ, in which the expression of the gfp gene or the ompC gene was mediated by the ompC gene promoter through the cognate response regulator, OmpR. The output signals produced by the chimeric DcuSZ TCS were enough to detect fumarate concentration quantatively, in which the expressions of the gfp gene and the ompC gene were proportional to the fumarate concentration in the medium. Moreover, principal component analysis of C4-dicarboxylates showed that DcuSZ chimera was highly specific to fumarate but could also respond to other C4-dicarboxylates, which strongly suggests that TCS-based high throughput screening system able to screen microorganisms producing target chemicals can be developed.

Gamma-aminobutyric acid (GABA) is a precursor of one of the most promising heat-resistant biopolymers, Nylon-4, and can be produced by the decarboxylation of monosodium glutamate (MSG). In this study, a synthetic protein complex was applied to improve the GABA conversion in engineered Escherichia coli. Complexes were constructed by assembling a single protein–protein interaction domain SH3 to the glutamate decarboxylase (GadA and GadB) and attaching a cognate peptide ligand to the glutamate/GABA antiporter (GadC) at the N-terminus, C-terminus, and the 233rd amino acid residue. When GadA and GadC were co-overexpressed via the C-terminus complex, a GABA concentration of 5.65 g/l was obtained from 10 g/l MSG, which corresponds to a GABA yield of 93 %. A significant increase of the GABA productivity was also observed where the GABA productivity increased 2.5-fold in the early culture period due to the introduction of the synthetic protein complex. The GABA pathway efficiency and GABA productivity were enhanced by the introduction of the complex between Gad and glutamate/GABA antiporter.

We have previously analyzed the proteome of recombinant Escherichia coli producing poly(3-hydroxybutyrate) [P(3HB)] and revealed that the expression level of several enzymes in central metabolism are proportional to the amount of P(3HB) accumulated in the cells. Based on these results, the amplification effects of triosephosphate isomerase (TpiA) and fructose-bisphosphate aldolase (FbaA) on P(3HB) synthesis were examined in recombinant E. coli W3110, XL1-Blue, and W lacI mutant strains using glucose, sucrose and xylose as carbon sources. Amplification of TpiA and FbaA significantly increased the P(3HB) contents and concentrations in the three E. coli strains. TpiA amplification in E. coli XL1-Blue lacI increased P(3HB) from 0.4 to 1.6 to g/l from glucose. Thus amplification of glycolytic pathway enzymes is a good strategy for efficient production of P(3HB) by allowing increased glycolytic pathway flux to make more acetyl-CoA available for P(3HB) biosynthesis.

Recent genome comparisons of E. coli B and K-12 strains have indicated that the makeup of the cell envelopes in these two strains is quite different. Therefore, we analyzed and compared the envelope proteomes of E. coli BL21(DE3) and MG1655. A total of 165 protein spots, including 62 nonredundant proteins, were unambiguously identified by two-dimensional gel electrophoresis and mass spectrometry. Of these, 43 proteins were conserved between the two strains, whereas 4 and 16 strain-specific proteins were identified only in E. coli BL21(DE3) and MG1655, respectively. Additionally, 24 proteins showed more than 2-fold differences in intensities between the B and K-12 strains. The reference envelope proteome maps showed that E. coli envelope mainly contained channel proteins and lipoproteins. Interesting proteomic observations between the two strains were as follows: (i) B produced more OmpF porin with a larger pore size than K-12, indicating an increase in the membrane permeability; (ii) B produced higher amounts of lipoproteins, which facilitates the assembly of outer membrane beta-barrel proteins; and (iii) motility- (FliC) and chemotaxis-related proteins (CheA and CheW) were detected only in K-12, which showed that E. coli B is restricted with regard to migration under unfavorable conditions. These differences may influence the permeability and integrity of the cell envelope, showing that E. coli B may be more susceptible than K-12 to certain stress conditions. Thus, these findings suggest that E. coli K-12 and its derivatives will be more favorable strains in certain biotechnological applications, such as cell surface display or membrane engineering studies.

Two new tetracationic hetero-bimetallacycles were prepared from a bis-pyridine amide ligand and metal (Pd and Pt) acceptors. We found that both self-assembled hetero-bimetallacycles bind and unwind supercoiled DNA as established by photophysical and gel electrophoresis analyses, respectively.

The evolution of living organisms occurs via a combination of highly complicated processes that involve modification of various features such as appearance, metabolism and sensing systems. To understand the evolution of life, it is necessary to understand how each biological feature has been optimized in response to new environmental conditions and interrelated with other features through evolution. To accomplish this, we constructed contents-based trees for a two-component system (TCS) and metabolic network to determine how the environmental communication mechanism and the intracellular metabolism have evolved, respectively. We then conducted a comparative analysis of the two trees using ARACNE to evaluate the evolutionary and functional relationship between TCS and metabolism. The results showed that such integrated analysis can give new insight into the study of bacterial evolution.

A biosynthetic pathway for the production of (S)-3-hydroxybutyric acid (S3HB) from glucose was established in recombinant Escherichia coli by introducing the beta-ketothiolase gene from Ralstonia eutropha H16, the (S)-3-hydroxybutyryl-CoA dehydrogenase gene from R. eutropha H16, or Clostridium acetobutylicum ATCC824, and the 3-hydroxyisobutyryl-CoA hydrolase gene from Bacillus cereus ATCC14579. Artificial operon consisting of these genes was constructed and was expressed in E. coli BL21 (DE3) codon plus under T7 promoter by isopropyl beta-D: -thiogalactoside (IPTG) induction. Recombinant E. coli BL21 (DE3) codon plus expressing the beta-ketothiolase gene, the (S)-3-hydroxybutyryl-CoA dehydrogenase gene, and the 3-hydroxyisobutyryl-CoA hydrolase gene could synthesize enantiomerically pure S3HB to the concentration of 0.61 g l(-1) from 20 g l(-1) of glucose in Luria-Bertani medium. Fed-batch cultures of recombinant E. coli BL21 (DE3) codon plus were carried out to achieve higher titer of S3HB with varying induction time and glucose concentration during fermentation. Protein expression was induced by addition of 1 mM IPTG when cell concentration reached 10 and 20 g l(-1) (OD(600) = 30 and 60), respectively. When protein expression was induced at 60 of OD(600) and glucose was fed to the concentration of 15 g l(-1), 10.3 g l(-1) of S3HB was obtained in 38 h with the S3HB productivity of 0.21 g l(-1)h(-1). Lowering glucose concentration to 5 g l(-1) and induction of protein expression at 30 of OD(600) significantly reduced final S3HB concentration to 3.7 g l(-1), which also resulted in the decrease of the S3HB productivity to 0.05 g l(-1)h(-1).

When Halobacterium halobium R1 was cultured with cell recycle in a bioreactor equipped with an external hollow fiber membrane unit, the cell and bacteriorhodopsin concentrations reached in 10 days were 30.3 g cell dry weight/l and 282 mg/l, respectively. The productivity of bacteriorhodopsin (1.15 mg/l·h) was much higher than that (0.16 mg/l·h) obtained by typical batch fermentation. © Rapid Science Ltd. 1998

We have developed MetaFluxNet which is a stand-alone program package for the management of metabolic reaction information and quantitative metabolic flux analysis. It allows users to interpret and examine metabolic behavior in response to genetic and/or environmental modifications. As a result, quantitative in silico simulations of metabolic pathways can be carried out to understand the metabolic status and to design the metabolic engineering strategies. The main features of the program include a well-developed model construction environment, user-friendly interface for metabolic flux analysis (MFA), comparative MFA of strains having different genotypes under various environmental conditions, and automated pathway layout creation. The usefulness and functionality of the program are demonstrated by applying to metabolic pathways in E. coli. First, a large-scale in silico E. coli model is constructed using MetaFluxNet, and then the effects of carbon sources on intracellular flux distributions and succinic acid production were investigated on the basis of the uptake and secretion rates of the relevant metabolites. The results indicated that among three carbon sources available, the most reduced substrate is sorbitol which yields efficient succinic acid production. The software can be downloaded from http://mbel.kaist.ac.kr/.