Search

[Display omitted] Nonionic surfactant aerosols play a crucial role in many industries, but they can cause acute irritation to users' eyes during spraying. This cytotoxic process is associated with corneal cell necrosis causing cell membrane disruption. Industrial grade surfactants are typically polydisperse mixtures described by their nominal chemical structure but how the polydispersity affects their interactions with cell membrane, remains largely unexplored. A better understanding could benefit product formulations to maximise their efficiency whilst minimising their toxicity to the users. In this study, poly - oxyethylene glycol monododecyl ethers (C 12 E 4 , C 12 E 23) were used to form ideal binary surfactant mixtures. The cytotoxicities of mono and polydispersed surfactants towards human corneal epithelial cells were examined, followed by a series of biophysical characterisations of interactions between surfactants and model cell membranes. Notably, to probe the journey of individual C 12 E 4 and C 12 E 23 surfactant molecules across the cell membrane from a binary surfactant mixture, "two-colour" neutron reflection measurements were achieved via Hydrogen/Deuterium substitution. The relative distributions of C 12 E 4 and C 12 E 23 across cell membranes and their nanostructural conformations revealed a synergistic membrane-lytic ability initiated by surfactant mixing, with the more hydrophobic C 12 E 4 exhibiting stronger membrane binding potency than the hydrophilic C 12 E 23. The exact molar ratio of C 12 E 4 against C 12 E 23 in the mixture determined how the mixed surfactant interacted with the cell membrane, and how the process directly impacted cytotoxicity and eye irritation. Thus, the cytotoxicity of polydisperse surfactants is not the same as monodisperse surfactant of the same average structure. This work provides a useful basis for the assessment of surfactant mixing by balancing their efficiency and toxicity. [ABSTRACT FROM AUTHOR]

Abstract 3D printing technologies such as fused filament fabrication (FFF) offer great opportunities to enable the fabrication of complex geometries without access to a workshop or knowledge of machining. By adding filler materials to the raw filaments used for FFF, the material properties of the plastic can be adapted. With the addition of neutron absorbing particles, filaments can be created that enable 3D printing of neutron shielding with arbitrary geometry. Two materials for FFF are presented with different mixing ratios of hexagonal Boron nitride (h-BN) and Polylactic acid (PLA). BNPLA25 with 25 %wt h-BN and BNPLA35 with 35 %wt h-BN are compared to the commercially available Addbor N25 material. To qualify the applicability of BNPLA25 and BNPLA35 as shielding material for neutron instrumentation, such as neutron imaging, we investigated the overall neutron attenuation, the influence of non-optimized print settings, as well as characterized the incoherent neutron scattering and the microstructure using neutron imaging, and time-of-flight small-angle-neutron-scattering. Finally, the tensile strength of the material was determined in standardized tensile tests. The measured neutron attenuation shows excellent agreement with analytical calculations, thus validating both the material composition and the calculation method. Approximately 6 mm (8 mm) BNPLA35 are needed for $$1\times 10^{-3}$$ 1 × 10 - 3 transmission of a cold (thermal) neutron beam. Lack of extrusion due to suboptimal print settings can be compensated by increased thickness, clearly visible defects can be mitigated by 11–18% increase in thickness. Incoherent scattering is shown to be strongly reduced compared to pure PLA. The tensile strength of the material is shown not to be impacted by the h-BN filler. The good agreement between the measured attenuation and calculation, combined with the adoption of safety factor enables the quick and easy development as well as the performance estimation of shielding components. BNPLA is uniquely suited for 3D printing neutron shielding because of the combination of non-abrasive h-BN particles in standard PLA, which results in a filament that can be printed with almost any off-the-shelf printer and virtually no prior experience in 3D printing. This mitigates the slightly lower attenuation observed as compared to filaments containing $${\hbox {B}_{4}}\hbox {C}$$ B 4 C , which is highly abrasive and requires extensive additive manufacturing experience.

The structure of mRNA lipid nanoparticles (LNPs) is still under debate, with different studies presenting varying morphological characteristics, significantly hindering their biomedical potential. A typical formulation process of mRNA LNPs involves three steps: initial rapid mixing of lipids in an ethanol phase and mRNA in an acidic aqueous phase, followed by the swift removal of ethanol, and finally adjusting the solution to a neutral environment. In this study, we utilize Small Angle Neutron Scattering (SANS) with contrast matching to reveal the kinetic pathway-dependent of mRNA LNPs morphology. We find that the formulation process of the Moderna COVID-19 vaccine is controlled by a competition between aggregation and microphase separation, dictating the diverse morphologies observed in mRNA LNPs. The first step leads to the formation of polydisperse spherical droplets with an average diameter of 42±6.0 nm in an acidic ethanol aqueous solution. Ethanol removal initiates both aggregation and internal microphase separation, resulting in a polydisperse core-shell structure with an average diameter of 48±3.7 nm. Heptadecan-9-yl 8-((2-hydroxyethyl) (6-oxo-6-(undecyloxy) hexyl) amino) octanoate (SM-102) binds to mRNA via electrostatic interaction to form a reverse-wormlike micelle structure inside. The 1,2-Distearoyl-sn‑glycero-3-phosphocholine (DSPC) and PEG-lipid are just in the shell and cholesterol acting as a filler throughout the core-shell structure. Upon transitioning to a neutral environment, SM-102 loses its charge and neither the periphery nor the reverse-wormlike micelle can maintain their stabilities, leading to further aggregation and microphase separation. The average diameter of core-shell structure turns to be 66±5.2 nm. In the actual formulation process of the Moderna COVID-19 vaccine, steps 2 and 3 occur simultaneously, and the competition between aggregation and microphase separation determines the final morphology. These findings offer crucial insights into optimizing the morphology of mRNA LNPs, thereby facilitating advancements in vaccine development and mRNA vaccine delivery technologies.

[Display omitted] Colloidal suspensions of anisotropic particles are ubiquitous in particle-based industries. Consequently, there is a need to quantify the effects of particle shape on equilibrium phases and kinetic state transitions, particularly at lower aspect ratios (L / D ≈ 1–10). We present a new, colloidal system comprised of hollow, octadecyl-coated silica rods with 40 nm diameter with controlled aspect ratio and thermoreversible short-range attractions. Rheology and dynamic light scattering measurements on suspensions of these hollow adhesive hard rods with nominal aspect ratio ≈3 suspended in tetradecane exhibit thermoreversible gelation without complicating effects of gravitational settling. Small angle neutron scattering measurements of the microstructure are analyzed to determine the effective strength of attraction in the form of Baxter sticky parameter. Quantitative agreement is found with simulation predictions of the thermoreversible gel transition as a function of volume fraction, further validating a universal state diagram and providing guidance for the effects of aspect ratio on gelation. [ABSTRACT FROM AUTHOR]

The formation of distorted lamellar phases, distinguished by their arrangement of crumpled, stacked layers, is frequently accompanied by the disruption of long-range order, leading to the formation of interconnected network structures commonly observed in the sponge phase. Nevertheless, traditional scattering functions grounded in deterministic modeling fall short of fully representing these intricate structural characteristics. Our hypothesis posits that a deep learning method, in conjunction with the generalized leveled wave approach used for describing structural features of distorted lamellar phases, can quantitatively unveil the inherent spatial correlations within these phases. This report outlines a novel strategy that integrates convolutional neural networks and variational autoencoders, supported by stochastically generated density fluctuations, into a regression analysis framework for extracting structural features of distorted lamellar phases from small angle neutron scattering data. To evaluate the efficacy of our proposed approach, we conducted computational accuracy assessments and applied it to the analysis of experimentally measured small angle neutron scattering spectra of AOT surfactant solutions, a frequently studied lamellar system. The findings unambiguously demonstrate that deep learning provides a dependable and quantitative approach for investigating the morphology of wide variations of distorted lamellar phases. It is adaptable for deciphering structures from the lamellar to sponge phase including intermediate structures exhibiting fused topological features. This research highlights the effectiveness of deep learning methods in tackling complex issues in the field of soft matter structural analysis and beyond. [ABSTRACT FROM AUTHOR]

[Display omitted] Aqueous suspensions of cellulose nanocrystals (CNC) form a re-entrant liquid crystal (LC) phase with increasing salinity. Phase separation occurs in this LC state leading to a biphasic gel with a flow programmable structure that can be used to form anisotropic soft materials. We term this state a Liquid Crystal Hydroglass (LCH). Defining the mechanisms by which the LCH forms requires detailed structural analysis at the mesoscopic length scale. By utilising Small Angle Neutron Scattering (SANS), we investigated the microstructure transitions in CNC suspensions, with a particular focus on the unique LC re-entrancy and gelation into the biphasic LCH. Scattering from LCH gels comprises contributions from a dispersed liquid state and static heterogeneity, characterised using a Lorentzian-Gaussian model of inhomogeneity. This conceptually supports a gelation mechanism (spinodal decomposition) in CNC suspensions towards a biphasic structure of the LCH. It also demonstrates that, with increasing salinity, the non-monotonic variation in effective volume fraction of CNC rods fundamentally causes the LC re-entrancy. This work provides the first experimental characterisation of the LC-re-entrancy and formation of an anisotropic LCH gel. The proposed mechanism can be extended to understanding the general behaviour of anisotropic colloids. [ABSTRACT FROM AUTHOR]

The microstructure of wormlike micelles (WLM) directly affects the rheological properties of their solutions. Investigating the structure–property relationships of WLM has long been a popular topic for researchers who have developed theoretical and empirical models to describe their viscoelastic behavior. All these models rely on a collection of characteristic "length" parameters that are often difficult to estimate using relatively simple rheological tests. In particular, the micelle stiffness, as described by the persistence length, can be difficult to measure experimentally, while being very impactful on the bulk rheology of WLM solutions. Here, an array of inorganic salts (NaCl, LiCl, MgCl2, NaBr, NaI, and Na2SO4) have been used to induce wormlike micelle formation in an aqueous solution of the surfactant sodium lauryl ether sulfate. Ion dissociation/association with the surfactant head groups and the hydrogen bond network of the water alters the effective stiffness of the micelles, allowing for an estimation of the stiffness using three different methods: (1) small angle neutron scattering (SANS) measurements, (2) oscillatory rheological measurements, and (3) steady rheological measurements with a thermodynamic packing parameter model. Each of these methods are then compared and shown to be consistent with each other for the micelle solutions tested. The consistency of the results across all the measurements suggests that the approach used in this study, which estimates micelle parameters using steady shear rheology and a thermodynamic model, could provide a simpler and more accessible method for estimating micelle parameters in a wide range of surfactant systems. [ABSTRACT FROM AUTHOR]

[Display omitted] The self-assembly structures and phase behaviour of phospholipids in protic ionic liquids (ILs) depend on intermolecular forces that can be controlled through changes in the size, polarity, and H-bond capacity of the solvent. The structure and temperature stability of the self-assembled phases formed by four phospholipids in three ILs was determined by a combination of small- and wide-angle X-ray scattering (SAXS and WAXS) and small-angle neutron scattering (SANS). The phospholipids have identical phosphocholine head groups but different alkyl tail lengths and saturations (DOPC, POPC, DPPC and DSPC), while the ILs' amphiphilicity, H–bond network density and polarity are varied between propylammonium nitrate (PAN) to ethylammonium nitrate (EAN) to ethanolammonium nitrate (EtAN). The observed structures and phase behaviour of the lipids becomes more surfactant–like with decreasing average solvent polarity, H-bond network density and surface tension. In PAN, all the investigated phospholipids behave like surfactants in water. In EAN they exhibit anomalous phase sequences and unexpected transitions as a function of temperature, while EtAN supports structures that share characteristics with water and EAN. Structures formed are also sensitive to proximity to the lipid chain melting temperature. [ABSTRACT FROM AUTHOR]

[Display omitted] Enveloped viruses are pivotal in causing various illnesses, including influenza and COVID-19. The antimicrobial peptide LL-37, a critical part of the human innate immune system, exhibits potential as an antiviral agent capable of thwarting these viral threats. Its mode of action involves versatile and non-specific interactions that culminate in dismantling the viral envelope, ultimately rendering the viruses inert. However, the exact mechanism of action is not yet understood. Here, the mechanism of LL-37 triggered changes in the structure and function of an enveloped virus is investigated. The bacteriophage "Phi6" is used as a surrogate for pathogenic enveloped viruses. Small angle X-ray and neutron scattering combined with light scattering techniques demonstrate that LL-37 actively integrates into the virus's lipid envelope. LL-37 addition to Phi6 leads to curvature modification in the lipid bilayer, ultimately separating the envelope from the nucleocapsid. Additional biological assays confirm the loss of virus infectivity in the presence of LL-37, which coincides with the structural transformations. The results provide a fundamental understanding of the structure-activity relationship related to enveloped viruses. The knowledge of peptide-virus interactions can guide the design of future peptide-based antiviral drugs and therapies. [ABSTRACT FROM AUTHOR]

In this work, the nanostructure of oxide dispersion-strengthened steels was studied by small-angle neutron scattering (SANS), transmission electron microscopy (TEM), and atom probe tomography (APT). The steels under study have different alloying systems differing in their contents of Cr, V, Ti, Al, and Zr. The methods of local analysis of TEM and APT revealed a significant number of nanosized oxide particles and clusters. Their sizes, number densities, and compositions were determined. A calculation of hardness from SANS data collected without an external magnetic field, or under a 1.1 T field, showed good agreement with the microhardness of the materials. The importance of taking into account two types of inclusions (oxides and clusters) and both nuclear and magnetic scattering was shown by the analysis of the scattering data. [ABSTRACT FROM AUTHOR]

Magnetite and gallium substituted cuboferrites with a composition of GaxFe3−xO4 (0 ≤ x ≤ 1.4) were fabricated by thermal decomposition from acetylacetonate salts. The effect of Ga3+ cation substitution on the structural and thermomagnetic behavior of 4–12 nm sized core-shell particles was explored by X-ray and neutron diffraction, small angle neutron scattering, transmission electron microscopy, Mössbauer spectroscopy, and calorimetric measurements. Superparamagnetic (SPM) behavior and thermal capacity against increasing gallium concentration in nanoferrites were revealed. The highest heat capacity typical for Fe3O4@Ga0.6Fe2.4O4 and Ga0.6Fe2.4O4@Fe3O4 is accompanied by a slight stimulation of fibroblast culture growth and inhibition of HeLa cell growth. The observed effect is concentration dependent in the range of 0.01–0.1 mg/mL and particles of Ga0.6Fe2.4O4@Fe3O4 design have a greater effect on cells. Observed magnetic heat properties, as well as interactions with tumor and healthy cells, provide a basis for further biomedical research to use the proposed nanoparticle systems in cancer thermotherapy (magnetic hyperthermia). [ABSTRACT FROM AUTHOR]

[Display omitted] The forces that govern lipid self-assembly ionic liquids are similar to water, but their different balance can result in unexpected behaviour. The self-assembly behaviour and phase equilibria of two phospholipids, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), in the most common protic ionic liquid, ethylammonium nitrate (EAN) have been investigated as function of composition and temperature by small- and wide-angle X-ray scattering (SAXS/WAXS) and small-angle neutron scattering (SANS). Both lipids form unusual self-assembly structures and show complex and unexpected phase behaviour unlike that seen in water; DSPC undergoes a gel L β to crystalline L c phase transition on warming, while POPC forms worm-like micelles L 1 upon dilution. This surprising phase behaviour is attributed to the large size of the EAN ions that solvate the lipid headgroup compared to water changing amphiphile packing. Weaker H-bonding between EAN and lipid headgroups also contributes. These results provide new insight for the design of lipid based nanostructured materials in ionic liquids with atypical properties. [ABSTRACT FROM AUTHOR]

Doping or alloying of the cations on the A-site and halides on the X site of ABX3 perovskites has been demonstrated as a successful technique for improving moisture stability of perovskite films for optoelectronic applications. Despite structural and electrical stability improvements, these films still undergo moisture induced degradation to Lead Iodide and other photo-inactive phases, reducing device lifetime and performance. Understanding of their moisture induced degradation has been limited by the contrast mechanisms and sensitivity of optical and x-ray scattering techniques. Time-of-Flight Grazing Incidence Small Angle Neutron Scattering (TOF-GISANS) presents itself as a powerful alternative capable of identifying low atomic weight phases and offering depth resolution. Herein we use TOF-GISANS to begin to uncover moisture induced degradation pathways in various mixed perovskite systems fabricated under ambient conditions and exposed to 90% rH in the dark for up to 12 h, showing poor stoichiometric homogeneity through the bulk of the film and facile formation of deuterated by-products at ambient temperatures. We find evidence indicative of formation of PbI2, and PbBr2 from peaks apparent in scattering from the surface of MAPbI3, FA0.83MA0.17Pb(I0.83Br0.17)3, and FA0.83Cs0.17Pb(I0.83Br0.17)3 thin films, with degradation less pronounced in the latter films containing Cs. Deuterated by-products form readily, resulting in decreasing average particle size as perovskite crystals swell and fragment from the grain periphery inwards. Cs0.05(FA0.83MA0.17)0.95Pb(I0.84Br0.16)3shows impressive phase resilience compared to the other mixtures, with minimal segregation to other phases observed in vertical cuts through the 2D scattering image, though still exhibits deleterious morphological degradation. TOF-GISANS is demonstrated as a powerful tool for characterisation of these materials, with significant potential for future investigations into phase changes in thin films.

Soil derived dissolved organic matter (DOM) is an important component of the carbon cycle and influences numerous biogeochemical processes, including the formation of mineral-organic associations. DOM ranges in size from small organic molecules to macromolecules and colloidal aggregates. In this study we have used small angle neutron (SANS) and X-ray (SAXS) scattering to characterize the colloidal DOM fraction from the organic layer of a boreal forest soil, and its interactions with hematite (α-Fe2O3) mineral nanoparticles. Comparison between SAXS and contrast variation SANS patterns revealed that the scattering form factor of the colloidal DOM aggregates was essentially independent of the scattering contrast, implying that the colloidal aggregates have an essentially homogeneous chemical composition, down to the nanometre length scale. Variation of the D2O/H2O ratio of the solvent yielded a SANS intensity minimum at ca. 40 ​vol % D2O, which was consistent with colloids composed of mainly polysaccharides. At pH 5.5 the pure hematite nanoparticles were colloidally stable in water and characterized by a ζ-potential of +25 ​mV and a hydrodynamic radius of ca. 70 ​nm. In the presence of DOM, the hematite nanoparticles lost the colloidal stability and aggregated into larger clusters, displaying a negative ζ-potential of ca. −25 ​mV. The charge reversal suggested that negatively charged polyanions of DOM adsorbed onto the hematite particles, possibly leading to bridging flocculation. Our results suggested that mainly low molecular weight components induced hematite aggregation because no or very limited interactions between DOM colloids and hematite were detected.

[Display omitted] The superchaotropic Keggin polyoxometalate α-SiW 12 O 40 4− (SiW) was recently shown to stabilize non-ionic surfactant (C 18:1 E 10) foams owing to electrostatic repulsion that arises from the adsorption of SiW-ions to the foam interfaces. The precise mechanism of foam stabilization by SiW however remained unsolved. Imaging and conductimetry were used on macroscopic foams to monitor the foam collapse under free drainage and small angle neutron scattering (SANS) at a given foam height allowed for the tracking of the evolution of film thickness under quasi-stationary conditions. Thin film pressure balance (TFPB) measurements enabled to quantify the resistance of single foam films to external pressure and to identify intra-film forces. At low SiW/surfactant ratios, the adsorption of SiW induces electrostatic repulsion within foam films. Above a concentration threshold corresponding to an adsorption saturation, excess of SiW screens the electrostatic repulsion that leads to thinner foam films. Despite screened electrostatics, the foam and single foam films remain very stable caused by an additional steric stabilizing force consistent with the presence of trapped micelles inside the foam films that bridge between the interfaces. These trapped micelles can serve as a surfactant reservoir, which promotes self-healing of the interface leading to much more resilient foam films in comparison to bare surfactant foams/films. [ABSTRACT FROM AUTHOR]

Here, we describe the behavior of mixtures of stearic acid (SA) and its hydroxylated counterpart 12-hydroxystearic acid (12-HSA) in aqueous mixtures at room temperature as a function of the 12-HSA/SA mole ratio R. The morphologies of the self-assembled aggregates are obtained through a multi-structural approach that combines confocal and cryo-TEM microscopies with small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS) measurements, coupled with rheology measurements. Fatty acids are solubilized by an excess of ethanolamine counterions, so that their heads are negatively charged. A clear trend towards partitioning between the two types of fatty acids is observed, presumably driven by the favorable formation of a H-bond network between hydroxyl OH function on the 12th carbon. For all R, the self-assembled structures are locally lamellar, with bilayers composed of crystallized and strongly interdigitated fatty acids. At high R, multilamellar tubes are formed. The doping via a low amount of SA molecules slightly modifies the dimensions of the tubes and decreases the bilayer rigidity. The solutions have a gel-like behavior. At intermediate R, tubes coexist in solution with helical ribbons. At low R, local partitioning also occurs, and the architecture of the self-assemblies associates the two morphologies of the pure fatty acids systems: they are faceted objects with planar domains enriched in SA molecules, capped with curved domains enriched in 12-HSA molecules. The rigidity of the bilayers is strongly increased, as well their storage modulus. The solutions remain, however, viscous fluids in this regime. [ABSTRACT FROM AUTHOR]

Abstract An in situ autogenous particle‐reinforced Ti‐2.5Zr‐2Al‐1(Si,C) titanium alloy is prepared by vacuum induction melting. The wide range of an effective strain between 0.2 and 1.2 and the corresponding microstructure are obtained by the double‐cone high‐throughput compression test and finite element simulation. The deformation mechanism diagram with strains of 0.2–1.2 and strain rates of 0.7–1.5 s−1 at 900°C is constructed. When the strain rate is 1.3 s−1, dynamic recovery occurs in the small strain range (1.182), resulting in the deformation bands. High‐angle annular dark field and high‐resolution transmission electron microscopy are used to determine the existence of bimodal particle distribution, namely micron‐scale TiC particles and nano‐scale Ti5Si3 and (Zr, Si) particles. The average radius of the (Zr, Si) nanoparticles measured by small angle neutron scattering is 19.3 nm, and the volume fraction is 0.35%. DRX grains with an average size of 0.49 μm are obtained at 900°C, strain rate of 1.3 s−1, and strain of about 0.6. Micron‐scale particles stimulated DRX nucleation, while nanoscale particles hindered the growth of new grains, resulting in grain refinement.

The structure–property studies in unpolymerized and polymerized tannic acid incorporated hydrogels exhibited the presence of micron sized aggregates. The hydrogen bonded aggregates breaks at high temperatures for the unpolymerized and polymerized cases as evident from the scattering studies. The structural changes is clearly reflected in rheological properties for the unpolymerized case as a clear elastic to dissipative transition while the polymerized case exhibited dissipation even at higher temperatures. [Display omitted] Hydrogels made with semi-interpenetrating networks of the oligomerized polyphenol tannic acid, and poly(acrylamide), exhibit high stiffness and toughness. However, the structure property relationships that give rise to enhanced mechanical properties is not well understood. Herein, we systematically investigate the hydrogels using small angle X-ray scattering and small and Ultra-small angle neutron scattering within a wide length scale range (1 nm to 20 µm), polarized optical microscopy, and rheology. Small angle X-ray and neutron scattering reveal the presence of micron sized hydrogen bonded clusters in the hydrogels. Breaking of hydrogen bonded clusters above a critical solution temperature was clearly observed in the small angle neutron scattering data. Polarized optical microscopy show enhanced anisotropy for the gels with oligomerized tannic acid incorporated - when compared to gels with monomeric tannic acid. Rheological studies at varying temperatures nicely corroborate the structural changes observed at high temperatures and reveal a self-healing behavior of the gels. The knowledge gained from this study will aid in rational design of hydrogels for biomedical applications. [ABSTRACT FROM AUTHOR]

[Display omitted] Mixtures of hyaluronic acid (HA) with liposomes lead to hybrid colloid–polymer systems with a great interest in drug delivery. However, little is known about their microstructure. Small angle neutron scattering (SANS) is a valuable tool to characterize these systems in the semi-dilute entangled regime (1.5% HA) at high liposome concentration (80 mM lipids). The objective was to elucidate the influence of liposome surface (neutral, cationic, anionic or anionic PEGylated), drug encapsulation and HA concentration in a buffer mimicking biological fluids (37 °C). First, liposomes were characterized by SANS, cryo-electron microscopy, and dynamic light scattering and HA by SANS, size exclusion chromatography, and rheology. Secondly, HA-liposome mixtures were studied by SANS. In HA, liposomes kept their integrity. Anionic and PEGylated liposomes were in close contact within dense clusters with an amorphous organization. The center-to-center distance between liposomes corresponded to twice their diameter. A depletion mechanism could explain these findings. Encapsulation of a corticoid did not modify this organization. Cationic liposomes formed less dense aggregates and were better dispersed due to their complexation with HA. Liposome surface governed the interactions and microstructure of these hybrid systems. [ABSTRACT FROM AUTHOR]

Magnesium doped Amorphous Calcium Carbonate was synthesised from precursor solutions containing varying amounts of calcium, magnesium, H2O and D2O. The Mg/Ca ratio in the resultant Amorphous Calcium Carbonate was found to vary linearly with the Mg/Ca ratio in the precursor solution. All samples crystallised as aragonite. No Mg was found in the final aragonite crystals. Changes in the Mg to Ca ratio were found to only marginally effect nucleation rates but strongly effect crystal growth rates. These results are consistent with a dissolution-reprecipitation model for aragonite formation via an Amorphous Calcium Carbonate intermediate. [ABSTRACT FROM AUTHOR]

[Display omitted] Hypothesis: Saponins are a class of plant derived surfactants which are widely used in food related foams and emulsions, aerated drinks, and in pharmaceuticals and cosmetics. As a potential biosourced and renewable ingredient in a wider range of surfactant based formulations their potential is intimately associated with their mixing with synthetic surfactants. As such the nature of the mixed saponin-surfactant self-assembly is an important characteristic to investigate and understand. The unconventional structure of the saponins compared to the conventional synthetic surfactants poses some interesting constraints on the structures of the mixed aggregates. Experiments: Small angle neutron scattering, SANS, is used to investigate the structure of the saponin, escin, mixed with a range of nonionic surfactants with different ethylene oxide groups, from triethylene glycol monododecyl ether, C 12 E 3 , to dodecaethylene glycol monododecyl ether, C 12 E 12. Findings: The scattering data reveal a complex evolution in the solution self-assembled structure with varying escin / nonionic composition and ethylene oxide chain length. The rich structural development comprises of the evolution from the elongated micelle structure of escin to the micelle structure of the nonionic surfactant. At the intermediate solution compositions the structure is predominantly planar, comprising mostly of planar / micellar mixed phases. The nature of the planar structures depend upon the ethylene oxide chain length and the solution composition, and include lamellar, bilamellar vesicle, multilamellar vesicle, and nanovesicle structures, in common with what is observed in other surfactant mixtures. [ABSTRACT FROM AUTHOR]

Lipid structural diversity strongly affects biomembrane chemico-physical and structural properties in addition to membrane-associated events. At high concentrations, cholesterol increases membrane order and rigidity, while polyunsaturated lipids are reported to increase disorder and flexibility. How these different tendencies balance in composite bilayers is still controversial. In this study, electron paramagnetic resonance spectroscopy, small angle neutron scattering, and neutron reflectivity were used to investigate the structural properties of cholesterol-containing lipid bilayers in the fluid state with increasing amounts of polyunsaturated omega-3 lipids. Either the hybrid 1-stearoyl-2-docosahexaenoyl-sn-glycero-3-phosphocholine or the symmetric 1,2-docosahexaenoyl-sn-glycero-3-phosphocholine were added to the mixture of the naturally abundant 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine and cholesterol. Our results indicate that the hybrid and the symmetric omega-3 phospholipids affect the microscopic organization of lipid bilayers differently. Cholesterol does not segregate from polyunsaturated phospholipids and, through interactions with them, is able to suppress the formation of non-lamellar structures induced by the symmetric polyunsaturated lipid. However, this order/disorder balance leads to a bilayer whose structural organization cannot be ascribed to either a liquid ordered or to a canonical liquid disordered phase, in that it displays a very loose packing of the intermediate segments of lipid chains. [ABSTRACT FROM AUTHOR]

Background: Small angle scattering techniques are beginning to be more widely utilised for structural analysis of biological systems. However, applying these techniques to study membrane proteins still remains problematic, due to sample preparation requirements and analysis of the resulting data. The development of styrene-maleic acid co-polymers (SMA) to extract membrane proteins into nanodiscs for further study provides a suitable environment for structural analysis. Methods: We use small angle neutron scattering (SANS) with three different contrasts to determine structural information for two different polymer nanodisc-incorporated proteins, Outer membrane protein F (OmpF) and gramicidin. Ab initio modelling was applied to generate protein/lipid structures from the SANS data. Other complementary structural methodologies, such as DLS, CD and TEM were compared alongside this data with known protein crystal structures. Results: A single-phase model was constructed for gramicidin-containing nanodiscs, which showed dimer formation in the centre of the nanodisc. For OmpF-nanodiscs we were able to construct a multi-phase model, providing structural information on the protein/lipid and polymer components of the sample. Conclusions: Polymer-nanodiscs can provide a suitable platform to investigate certain membrane proteins using SANS, alongside other structural methodologies. However, differences between the published crystal structure and OmpF-nanodiscs were observed, suggesting the nanodisc structure could be altering the folding of the protein. General significance: Small angle scattering techniques can provide structural information on the protein and polymer nanodisc without requiring crystallisation of the protein. Additional complementary techniques, such as ab initio modelling, can generate alternative models both the protein and nanodisc system.

Samples of porous matrices with the surface of channels (pores) modified with carbon were prepared on the basis of nanoporous sodium borosilicate glasses (SBS) with average pore diameter of 6 ± 0.5 (PG6) nm. A procedure has been developed for introduction of carbon into the PG6 channels from an aqueous solution of sucrose with its subsequent thermal decomposition. X-ray diffraction studies of the state of carbon in the pores of the obtained modified matrix have been carried out. The small-angle neutron scattering method is used for study of internal spatial arrangement of these matrices and to obtain information concerning to the state of channel surfaces in these samples. A combined analysis of the data obtained by X-ray diffraction and from the results of small-angle neutron scattering have shown that the process of thermal decomposition of sucrose in the channels led to the formation of amorphous carbo layers on the internal surface of the channels (pores) in these glasses, i.e. the "matrix-porous space" interface was being modified.

[Display omitted] There is an increased interest in the use of natural surfactant as replacements for synthetic surfactants due to their biosustainable and biocompatible properties. A category of natural surfactants which are attracting much current interest is the triterpenoid saponins; surface active components found extensively in a wide range of plant species. A wide range of different saponin structures exist, depending upon the plant species they are extracted from; but regardless of the variation in structural details they are all highly surface active glycosides. Greater exploitation and application requires a characterisation and understanding of their basic adsorption and self-assembly properties. Glycyrrhizic acid, extracted from Licorice root, is a monodesmosidic triterpenoid saponin. It is widely used in cosmetic and pharmaceutical applications due to its anti-inflammatory properties, and is an ingredient in foods as a sweetener additive. It has an additional attraction due to its gel forming properties at relatively low concentrations. Although it has attracted much recent attention, many of its basic surface active characteristics, adsorption and self-assembly, remain relatively unexplored. How the structure of the Glycyrrhizic acid saponin affects its surface active properties and the impact of gelation on these properties are important considerations, and to investigate these are the focus of the study. In this paper the adsorption properties at the air–water interface and the self-assembly in solution have been investigated using by neutron reflectivity and small angle neutron scattering; in non-gelling and gelling conditions. The adsorption isotherm is determined in water and in the presence of gelling additives, and compared with the adsorption behaviour of other saponins. Gelation has minimal impact on the adsorption; apart from producing a rougher surface with a surface texture on a macroscopic length scale. Globular micelles are formed in aqueous solution with modest anisotropy, and are compared with the structure of other saponin micelles. The addition of gelling agents results in only minimal micelle growth, and the solutions remain isotropic under applied shear flow. [ABSTRACT FROM AUTHOR]

[Display omitted] Liquid lipid nanoparticles (LLN) are oil-in-water nanoemulsions of great interest in the delivery of hydrophobic drug molecules. They consist of a surfactant shell and a liquid lipid core. The small size of LLNs makes them difficult to study, yet a detailed understanding of their internal structure is vital in developing stable drug delivery vehicles (DDVs). Here, we implement machine learning techniques alongside small angle neutron scattering experiments and molecular dynamics simulations to provide critical insight into the conformations and distributions of the lipid and surfactant throughout the LLN. We simulate the assembly of a single LLN composed of the lipid, triolein (GTO), and the surfactant, Brij O10. Our work shows that the addition of surfactant is pivotal in the formation of a disordered lipid core; the even coverage of Brij O10 across the LLN shields the GTO from water and so the lipids adopt conformations that reduce crystallisation. We demonstrate the superior ability of unsupervised artificial neural networks in characterising the internal structure of DDVs, when compared to more conventional geometric methods. We have identified, clustered, classified and averaged the dominant conformations of lipid and surfactant molecules within the LLN, providing a multi-scale picture of the internal structure of LLNs. [ABSTRACT FROM AUTHOR]

Trimeric photosystem I from the cyanobacterium Thermosynechococcus elongatus (TePSI) is an intrinsic membrane protein, which converts solar energy into electrical energy by oxidizing the soluble redox mediator cytochrome c6 (Cyt c6) and reducing ferredoxin. Here, we use cryo-electron microscopy and small angle neutron scattering (SANS) to characterize the transient binding of Cyt c6 to TePSI. The structure of TePSI cross-linked to Cyt c6 was solved at a resolution of 2.9 Å and shows additional cofactors as well as side chain density for 84% of the peptide chain of subunit PsaK, revealing a hydrophobic, membrane intrinsic loop that enables binding of associated proteins. Due to the poor binding specificity, Cyt c6 could not be localized with certainty in our cryo-EM analysis. SANS measurements confirm that Cyt c6 does not bind to TePSI at protein concentrations comparable to those for cross-linking. However, SANS data indicate a complex formation between TePSI and the non-native mitochondrial cytochrome from horse heart (Cyt cHH). Our study pinpoints the difficulty of identifying very small binding partners (less than 5% of the overall size) in EM structures when binding affinities are poor. We relate our results to well resolved co-structures with known binding affinities and recommend confirmatory methods for complexes with KM values higher than 20 μM.

A customized portable SAXS instrument has recently been constructed, installed, and tested at the D22 SANS instrument at ILL. Technical characteristics of this newly established plug-and-play SAXS system have recently been reported (J. Appl. Cryst. 2020, 53, 722). An optimized lead shielding arrangement on the SAXS system and a double energy threshold X-ray detector have been further implemented to substantially suppress the unavoidable high-energy gamma radiation background on the X-ray detector. The performance of the upgraded SAXS instrument has been examined systematically by determining background suppression factors (SFs) at various experimental conditions, including different neutron beam collimation lengths and X-ray sample-to-detector distances (SDDX-ray). Improved signal-to-noise ratio SAXS data enables combined SAXS and SANS measurements for all possible experimental conditions at the D22 instrument. Both SAXS and SANS data from the same sample volume can be fitted simultaneously using a common structural model, allowing unambiguous interpretation of the scattering data. Importantly, advanced in situ/real time investigations are possible, where both the SAXS and the SANS data can reveal time-resolved complementary nanoscale structural information. [ABSTRACT FROM AUTHOR]

The European Spallation Source (ESS), which is under construction in Lund (Sweden), will be the leading and most brilliant neutron source and aims at starting user operation at the end of 2023. Among others, two small angle neutron scattering (SANS) machines will be operated. Due to the high brilliance of the source, it is important to minimize the downtime of the instruments. For this, a collaboration between three German universities and the ESS was initialized to develop and construct a unified sample environment (SE) system. The main focus was set on the use of a robust carrier system for the different SEs, which allows setting up experiments and first prealignment outside the SANS instruments. This article covers the development and construction of a SE for SANS experiments with foams, which allows measuring foams at different drainage states and the control of the rate of foam formation, temperature, and measurement position. The functionality under ESS conditions was tested and neutron test measurement were carried out. [ABSTRACT FROM AUTHOR]

As part of the development of the new European Spallation Source (ESS) in Lund (Sweden), which will provide the most brilliant neutron beams worldwide, it is necessary to provide different sample environments with which the potential of the new source can be exploited as soon as possible from the start of operation. The overarching goal of the project is to reduce the downtimes of the instruments related to changing the sample environment by developing plug and play sample environments for different soft matter samples using the same general carrier platform and also providing full software integration and control by just using unified connectors. In the present article, as a part of this endeavor, the sample environment for in situ SANS and dynamic light scattering measurements is introduced. [ABSTRACT FROM AUTHOR]

Biomimetic liquid crystalline systems are widely used in skin care cosmetics and topical pharmaceutical preparations. Our ability to rationally design such formulations, however, is hampered by our incomplete understanding of their structure on the nanoscale. Using polarized light microscopy and small-angle and wide-angle X-ray scattering, the molecular architecture and properties of a barrier formulation prepared from distearoylphosphatidylcholine mixed with long chain fatty acid and alcohols, with and without antimicrobial pentanediols are directly probed. The nature and composition of the phases identified are determined through small-angle neutron scattering studies using chain-deuterated components, and the detailed structure and dynamics of the gel network lamellae are determined through molecular dynamics simulations. The formulations show molecular ordering with long and short periodicity lamellar phases and there is little change in these structures caused by changes in temperature, drying, or the application of shear stress. The diol-free formulation is demonstrated to be self-preserving, and the added pentanediols are shown to distribute within the interlamellar regions where they limit availability of water for microbial growth. In culmination of these studies, we develop a more complete picture of these complex biomimetic preparations, and thereby enable their structure-based design. [ABSTRACT FROM AUTHOR]

The adsorption of monoclonal antibodies (mAbs) on hydrophobic surfaces is known to cause protein aggregation and degradation. Therefore, surfactants, such as Poloxamer 188, are widely used in therapeutic formulations to stabilize mAbs and protect mAbs from interacting with liquid-solid interfaces. Here, the adsorption of Poloxamer 188, one mAb and their competitive adsorption on a model hydrophobic siliconized surface is investigated with neutron scattering coupled with contrast variation to determine the molecular structure of adsorbed layers for each case. Small angle neutron scattering measurements of the affinity of Poloxamer 188 to this mAb indicate that there is negligible binding at these solution conditions. Neutron reflectometry measurements of the mAb show irreversible adsorption on the siliconized surface, which cannot be washed off with neat buffer. Poloxamer 188 can be adsorbed on the surface already occupied by mAb, which enables partial removal of some adsorbed mAb by washing with buffer. The adsorption of the surfactant introduces significant conformational changes for mAb molecules that remain on the surface. In contrast, if the siliconized surface is first saturated with the surfactant, no adsorption of mAb is observed. Competitive adsorption of mAb and Poloxamer 188 from solution leads to a surface dominantly occupied with surfactant molecules, whereas only a minor amount of mAb absorbs. These findings clearly indicate that Poloxamer 188 can protect against mAb adsorption as well as modify the adsorbed conformation of previously adsorbed mAb. [ABSTRACT FROM AUTHOR]

A cold-rolled Ti-V high strength low alloy (HSLA) steel was isothermally annealed at 650 °C and 700 °C for different times. A unique combination of techniques including visible light microscopy (VLM), transmission electron microscopy (TEM), matrix dissolution, small angle neutron scattering (SANS) and hardness measurement has been employed to investigate the evolution of microstructure, hardness and precipitate composition, size and volume fraction. Results show that recrystallization is completed after annealing 8 h at 650 °C and 30 min at 700 °C. Three types of precipitates were identified: large Ti(C,N), medium-size (Ti,V)(C,N) and small (Ti,V)C. The Ti/(Ti+V) atomic ratio in the (Ti,V)C precipitates decreases with increasing radius in the 1–15 nm range, which can be explained by the initial nucleation of a TiC-rich core. The average size of the (Ti,V)C precipitates increases, whereas the number density decreases during annealing. The volume fractions of the three types of precipitates were separately determined by the matrix dissolution method. The volume fractions of (Ti,V)C precipitates obtained by matrix dissolution are comparable even slightly more accurate than those obtained by SANS. The hardness first increases and then decreases when annealing at both temperatures, which can be correlated well with the observed microstructural and precipitate evolution.

Polyoxometalates (POMs) are metal oxygen clusters with a range of interesting magnetic and catalytic properties. POMs with attached hydrocarbon chains show amphiphilic behaviour so we hypothesised that mixtures of a nonionic surfactant and anionic surfactants with a polyoxometalate cluster as headgroup would form mixed micelles, giving control of the POM density in the micelle, and which would differ in size and shape from micelles formed by the individual surfactants. Due to the high charge and large size of the POM, we suggested that these would be nonideal mixtures due to the complex interactions between the two types of surfactants. The nonideality and the micellar composition may be quantified using regular solution theory. With supplementary information provided by small-angle neutron scattering (SANS), an understanding of this unusual binary surfactant system can be established. A systematic study was performed on mixed surfactant systems containing polyoxometalate-headed amphiphiles (K 10 [P 2 W 17 O 61 OSi 2 (C n H 2n+1) 2 ], abbreviated as P 2 W 17 -2C n , where n = 12, 14 or 16) and hexaethylene glycol monododecyl ether (C 12 EO 6). Critical micelle concentrations (CMCs) of these mixtures were measured and used to calculate the interaction parameters based on regular solution theory, enabling prediction of micellar composition. Predictions were compared to micelle structures obtained from SANS. A phase diagram was also established. The CMCs of these mixtures suggest unusual unfavourable interactions between the two species, despite formation of mixed micelles. Micellar compositions obtained from SANS concurred with those calculated using the averaged interaction parameters for P 2 W 17 -2C n /C 12 EO 6 (n = 12 and 14). We attribute the unfavourable interactions to a combination of different phenomena: counterion-mediated interactions between P 2 W 17 units and the unfolding of the ethylene oxide headgroups of the nonionic surfactant, yet micelles still form in these systems due to the hydrophobic interactions between surfactant tails. [ABSTRACT FROM AUTHOR]

The work presents the characterization of Pluronic F127 micellar solutions in presence of hyaluronic acid in semi-dilute regime. The effects of the nature and salt concentration are investigated by differential scanning calorimetry and small angle neutron scattering. Hyaluronic acid reduces the critical micellar temperature to the same extend as an increase of the ionic strength. Within the investigated HA concentration range, the size and shape of the micelles are not modified by the addition of HA but their dispersion state depends on the salt concentration. By increasing the ionic strength we observe the formation of small micellar clusters which organize into a face-centered cubic liquid crystalline phase at high salt concentration. This behavior is reinforced by increasing the HA concentration or molecular weight. The nature of the salt plays also a role and divalent cations such as Ca2+ promote the clustering of micelles and their crystallization. The origin of the aggregative behavior is the change of the HA chain conformation –from stretched to coil- by addition of salt which in turn induces an excluded volume around the micelles and exerts a depletion interaction. [ABSTRACT FROM AUTHOR]

The kinetics of the dynamic instantaneous dissolution of the precipitated phases in 2195-T6 Al-Li alloy under high strain rate loading was firstly studied quantitatively by means of the small angle neutron scattering (SANS) and transmission electron microscopy (TEM) techniques, and the thermodynamics and transformation mechanism were also illustrated in this paper. The high strain rate loadings were performed by the split Hopkinson pressure bar. The maximum flow stresses increased but the pulse durations decreased with increasing strain rates. TEM observations indicated that the size and volume fraction of the T 1 phases decreased. The SANS fitting results showed that the radius and volume fraction of the T 1 phase decreased after loading. The dissolution activation energy (Q d) was calculated to be 28.4 kJ/mol by combining the Johnsone-Mehl-Avrami-Kolmogorov (JMAK) equation and the Arrhenius equation, indicating that the instantaneous dissolution of T 1 phase was kinetically feasible. The T 1 phase generated a larger distortion energy, and the surface energy as well as the internal pressure of T 1 phase increased in dissolving during dynamic loading to increase the free energy difference (driving force for dissolving) between T 1 phase and matrix, making the instantaneous dissolution of the T 1 phases be thermodynamically feasible. The diffusion rates of Cu and Li atoms were significantly accelerated to promote the instantaneous dissolution of T 1 phase particles. The results of the Vickers hardness values showed that the hardness increased after loadings, due to the high density of dislocations and only partial dissolution of the T 1 phase particles. [Display omitted] [ABSTRACT FROM AUTHOR]

The red-emitting fluorescent properties of bovine serum albumin (BSA)–gold conjugates are commonly attributed to gold nanoclusters formed by metallic and ionized gold atoms, stabilized by the protein. Others argue that red fluorescence originates from gold cation–protein complexes instead, not gold nanoclusters. Our fluorescence and infrared spectroscopy, neutron, and X-ray small-angle scattering measurements show that the fluorescence and structural behavior of BSA–Au conjugates are different in normal and heavy water, strengthening the argument for the existence of loose ionic gold–protein complexes. The quantum yield for red-emitting luminescence is higher in heavy water (3.5%) than normal water (2.4%), emphasizing the impact of hydration effects. Changes in red luminescence are associated with the perturbations of BSA conformations and alterations to interatomic gold–sulfur and gold–oxygen interactions. The relative alignment of domains I and II, II and III, III and IV of BSA, determined from small-angle scattering measurements, indicate a loose (“expanded-like”) structure at pH 12 (pD ~12); by contrast, at pH 7 (pD ~7), a more regular formation appears with an increased distance between the I and II domains, suggesting the localization of gold atoms in these regions.

Abstract Wood decayed by brown rot fungi and wood treated with the chelator-mediated Fenton (CMF) reaction, either alone or together with a cellulose enzyme cocktail, was analyzed by small angle neutron scattering (SANS), sum frequency generation (SFG) spectroscopy, Fourier transform infrared (FTIR) analysis, X-ray diffraction (XRD), atomic force microscopy (AFM), and transmission electron microscopy (TEM). Results showed that the CMF mechanism mimicked brown rot fungal attack for both holocellulose and lignin components of the wood. Crystalline cellulose and lignin were both depolymerized by the CMF reaction. Porosity of the softwood cell wall did not increase during CMF treatment, enzymes secreted by the fungi did not penetrate the decayed wood. The enzymes in the cellulose cocktail also did not appear to alter the effects of the CMF-treated wood relative to enhancing cell wall deconstruction. This suggests a rethinking of current brown rot decay models and supports a model where monomeric sugars and oligosaccharides diffuse from the softwood cell walls during non-enzymatic action. In this regard, the CMF mechanism should not be thought of as a “pretreatment” used to permit enzymatic penetration into softwood cell walls, but instead it enhances polysaccharide components diffusing to fungal enzymes located in wood cell lumen environments during decay. SANS and other data are consistent with a model for repolymerization and aggregation of at least some portion of the lignin within the cell wall, and this is supported by AFM and TEM data. The data suggest that new approaches for conversion of wood substrates to platform chemicals in biorefineries could be achieved using the CMF mechanism with >75% solubilization of lignocellulose, but that a more selective suite of enzymes and other downstream treatments may be required to work when using CMF deconstruction technology. Strategies to enhance polysaccharide release from lignocellulose substrates for enhanced enzymatic action and fermentation of the released fraction would also aid in the efficient recovery of the more uniform modified lignin fraction that the CMF reaction generates to enhance biorefinery profitability.