Search

This study aimed to evaluate the concentration, distribution, along with the environmental and human health impact of eight heavy metals-Pb, Cr, Cu, Cd, Zn, Mn, Ni, and As-on St. Martin's Island in the northeastern Bay of Bengal, and in doing so to help implement new legislations to protect the island. Focusing on the island's significance as a tourist destination, with seafood being a prominent dietary component, three sample types (sediment, seawater, and crustaceans) were selected for a comprehensive assessment, considering seasonal variations. Concentration of metals was observed to be lower than the established standards in sediment samples, but in seawater samples, Pb, Cr, Cd and Zn were higher than US-EPA values for natural marine water. The metals displayed a decreasing trend of Zn > Ni > Pb > Cu > Mn > As > Cd > Cr in crustacean samples for both seasons. Crustacean samples displayed higher metal concentrations in winter than in monsoon. Pb exceeded the maximum allowable limit for crustaceans with a concentration of about 3 and 4 mg kg -1 in monsoon and winter respectively; being more than 6-8 times the standard for Bangladesh which is only about 0.5 mg kg -1 . Health indices displayed that although adults may suffer less from carcinogenic/non-carcinogenic health effects, the risks are far greater for children. For both age groups, As and Ni displayed possibilities of developing cancer. Principal Component Analysis (PCA)shed light on the sources of metals and showed that most of them were from anthropogenic sources. Overall, this study found that the quality of the environment of the island was better in comparison to previous studies made before the pandemic, and so, if the trend continues, it may lead to a better environment for the organisms around the island and help to keep the negative physiological impacts from the consumption of these organisms to a minimal., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In the delta region of Bangladesh, Sonneratia apetala , also known as Keora and mangrove apple, is widely recognized for its dual role as a source of both food and medicine. Seasonal S. apetala fruits were gathered from Hatiya, Noakhali, in October 2021. The samples were segregated into pericarps and seeds, then fractionated into methanol segments. The anti-proliferative activities of these samples against lung A549 cells were evaluated using the Trypan blue exclusion method. Additionally, High-Performance Liquid Chromatography (HPLC) was employed to quantify phenolic compounds, while standard protocols facilitated the identification of specific phytochemical constituents. Chemical profiling via Gas Chromatography-Mass Spectrometry (GC-MS) and the isolation and detection of bioactive compounds through column chromatography and Nuclear Magnetic Resonance (NMR) analysis were undertaken. The methanol fractions of the seeds and pericarp were found to contain carbohydrates, tannins, flavonoids, steroids, alkaloids, glycosides, and terpenoids, with the absence of saponins and anthraquinones. Notably, the anti-proliferative effect demonstrated statistical significance at a concentration of 300 μg/mL for both extracts. Furthermore, HPLC analysis identified and quantified six polyphenols: catechin hydrate, (-)-epicatechin, rutin hydrate, trans -ferulic acid, trans -cinnamic acid, myricetin, and kaempferol, with the following concentrations: 46.65 and 12.72; 349.29 and 140.39; 5.26 and 33.06; 10.35 and 29.28; ND and 11.93; and 10.03 and 7.90 mg/100 g in the methanol fraction of the seed and pericarp, respectively. GC-MS analysis of S. apetala fruit revealed five notable compounds with significant peak areas (%): 2-methyltetracosane, tetratetracontane, heptacosane, 1-chloro-2-hexyl-1-octanol, and phenol, 3,5-bis(1,1-dimethylethyl), exhibiting peak areas of 43.96, 35.8, and 15.95, respectively. Meanwhile, the notable peak in S. apetala seeds was 1,3-benzenedicarboxylic acid, bis(2-ethylhexyl) ester, with a peak area (%) of 100. These compounds are known for their anticancer and antioxidant properties. Therefore , S. apetala , particularly its seeds and fruits, shows promising potential for development into dietary supplements and functional foods., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors. Published by Elsevier Ltd.)

This study examined the water quality of the Turag River, an important tributary river in Dhaka, Bangladesh in terms of physicochemical characteristics and heavy metal contamination to assess the potential risks to both ecological systems and human health. The majority of the water samples complied with the acceptable limits established by the World Health Organization (WHO) for various parameters including pH, electrical conductivity (EC), total dissolved solids (TDS), dissolved oxygen (DO), chemical oxygen demand (COD), sodium adsorption ratio (SAR), and magnesium adsorption ratio (MAR), except total hardness (TH). The sodium (Na), potassium (K), calcium (Ca), magnesium (Mg), chloride (Cl - ) , fluoride (F - ), nitrate (NO 3 - ), and sulfate (SO 4 2- ) levels in the water samples were found to be within acceptable ranges for most cases. Moreover, heavy metals including lead (Pb), cadmium (Cd), chromium (Cr), nickel (Ni), iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), arsenic (As), selenium (Se), and mercury (Hg) were analyzed and their mean concentrations (μg/L) were found in the order of Fe (244.72 ± 214.35) > Mn (28.93 ± 29.64) > Zn (22.97 ± 10.93) > Cu (8.28 ± 5.99) > Hg (8.23 ± 6.58) > As (1.34 ± 0.39) > Ni (1.20 ± 0.38) > Cr (0.67 ± 0.85) > Pb (0.61 ± 0.72) > Se (0.42 ± 0.48) > Cd (0.13 ± 0.09) which were within the acceptable limit, except Hg. The cumulative effect of all heavy metals was assessed through the heavy metal pollution index (HPI), contamination degree (C d ), and nemerow pollution index (P N ). The mean value of HPI (682.38 ± 525.68) crossed the critical index value of 100, indicating an elevated level of pollution. The mean value of C d (8.763 ± 6.48) indicates a low-moderate-significant level of contamination due to an elevated level of Hg, and for the P N it was found 174.27 ± 146.66, indicating a high level of pollution due to high level of Fe. Ecological risk index (ERI) indicated low levels of risk for Pb, Cd, Cr, Ni, Fe, Mn, As, Se, Cu, and Zn but a significantly high risk for Hg. The water was classified as good to excellent based on its physicochemical properties (pH, EC, TDS, COD, DO, F - , Cl - , NO 3 - , and SO 4 2- ) while it was deemed poor to unsuitable for heavy metals according to the water quality index (WQI). Among the carcinogenic constituents, As poses the greatest carcinogenic risk, particularly for children. The mean value of Cr, Mn, and As in the HQ ingestion for adult and child, and Cd, Hg for child exceeded the threshold value established by the United States Environmental Protection Agency (USEPA), while the HQ dermal values remained below the maximum limit for all heavy metals. The value of HI at all locations exceeds the threshold of 1, as specified by USEPA. Principal component analysis (PCA) and cluster analysis revealed that the presence of heavy metals in the Turag River was mainly attributed to anthropogenic sources, including industrial effluent discharge from neighboring industries, domestic wastewater, and agricultural runoff containing agrochemicals from the surrounding lands., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Utilization of vegetable tannins in leather processing is one of the convenient solutions to protect the environment pollution. Herein, the banana bunch and syrup of banana stem are utilized to prepare an ecofriendly tanning agent. The yield of banana bunch extraction efficiency is found 69.80 %. FT-IR analysis confirmed the presence of condensed type tanning component owing to the bearing of different polyphenolic groups. The content of tannins in extracted banana bunch and stem syrup is 3.13 % and 2.6 %, respectively. The phenolic content in the banana bunch extract is determined to be 1332.37 mg GAE/100g of dried weight and in syrup was 873.92 mg GAE/100g of dried weight. This makes it possible to be used as vegetable tanners. The extracted bunch and syrup are applied to re-tan leather and compared with conventionally used vegetable tanning agent (quebracho) in parallel. Tensile strength, tear strength and elongation percentage for the extracted banana bunch and syrup are obtained at 23.84 N/mm 2 , 68.26 N/mm, 47.07 %, and 22.97 N/mm 2 , 68.38 N/mm, 40.70 %, respectively. The softness is found 1.41 for the extracted bunch and 2.01 for the syrup. The grain crack load, distension at grain crack, strength at ball burst, distension at ball burst are 246.86 N, 13.24 mm, 530.77 N, 24.54 mm for banana stem syrup and 338.77 N, 13.42 mm, 460.65 N, 29.08 mm for bunch extract, respectively. The shrinkage temperatures recorded for banana bunch extract, syrup and Quebracho (control trial) tannins tanned leather samples are 76.5 °C, 75 °C and 84 °C subsequently. The flexing endurance of the bunch extract and syrup revealed acceptable values that are less than 4. Moreover, the bunch extract tanned leather shows greater thermal stability and for syrup it is similar with the quebracho tanned leather. All the results are satisfactory compared to the control trial. Finally, tanned leather is evaluated to assess the possibility of the newly developed tannin which proves its efficiency as a potential source of tanning material for the leather industry., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Surface-active softening agents, such as Fatliquors, have a significant impact on the leather industry as they enhance the physicochemical properties of leather. This study focuses on analyzing the synthesis, properties, characterization, and sulfonation of Swietenia mahagoni seed oil to determine its potential as a fatliquoring agent for leather. An investigation was conducted to verify the alteration of Swietenia mahagoni oil through the analysis of its properties before and after the sulfonation process. A scientific analysis was carried on the oil using GC-FID, revealing the presence of various unsaturated fatty acids such as linoleic, linolenic, oleic, palmitic, and arachidic acids. This demonstrates the sulfonating capability of this sky fruit seed oil. A fatliquor was created by sulfonating the oil, and the sulfonation was verified through Fourier Transform Infrared Spectroscopy (FTIR) and 1 H Nuclear Magnetic Resonance (NMR) spectra. The prominent peak observed at 1209 cm-1 in the FTIR spectra indicated the stretching of S=O in both sulfate and sulfonate groups. The newly formed protons (H-C-S or H-C-O) showed signals between δ 4.09 and 4.29 ppm in the 1 H NMR spectra, confirming the sulfonation of the fatliquor that was prepared. Moreover, the change in the melting point of sulfonated Mahogany oil from 40.8 °C to 48.1 °C suggests increased saturation levels. The fatliquor's emulsion stability was found to be at a satisfactory level. After conducting tests on the treated leather, the physical strength and morphological structure was analyzed using Field Emission Scanning Electron Microscopy (FE-SEM), the fatliquor improved the lubrication and strengthened the fibrous network structure of the leather, composed of thin and tight collagen fibers. The BOD5/COD ratio of the effluent from the experimental trial was determined to be 0.52, suggesting that the fatliquor developed is a biodegradable product. Finally, the antifungal capabilities of the fatliquor-treated leather were tested against four different fungus species: Aspergillus niger, Aspergillus flavus, Penicillium notatum, and Candida albicans, and the treated leather sample shown favorable antifungal activity., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Eco-friendly dyeing of jute packaging fabrics was evaluated using aqueous extraction of factory tea ( Camellia sinensis) wastes. Jute and factory tea wastes are available in Bangladesh and jute bags are used for packaging of various exportable agricultural commodities. The extract of factory tea waste (FTW) is dark coffee colored and it was characterized by attenuated total reflection-fourier transform infrared (ATR-FTIR) and microbial analysis. Nontoxic, non-allergic and eco-friendly natural dyeing process of jute packaging fabrics using extract of FTW were developed and optimized. Metal mordants 10 % on the weight of fabric was used to get the fastness properties of dyed jute fabric. The methods of application of mordants were pre-mordanting, simultaneous or meta-mordanting and post-mordanting. The color fastness and tensile properties were measured for all jute packaging fabrics and it is found that the dyed jute packaging fabrics showed a slight decrease in tensile breaking force (N) than undyed jute packaging fabric. The highest color fastness obtained with the meta mordanting method with ferrous sulfate mordant in a shade of dark coffee. The results of the color fastness for light and washing showed an excellent value of grade 4-5., Competing Interests: The authors declare that they have no conflict of interest., (© 2024 The Authors. Published by Elsevier Ltd.)

Outstanding biodegradability and biocompatibility are attributes associated with particular polyester substances that make this group useful in specific biomedical fields. To assess the potential as a biomaterial, a novel composite consisting of hydroxyapatite (HAp) and unsaturated polyester resin (UPR) was developed in this work. Using a hand-lay-up technique, various percentages (50, 40, 30, 20, and 10%) of HAp were reinforced into the UPR matrix to fabricate composite materials out of glass sheets. Prior to processing of the composite samples, hydroxyapatite was chemically synthesized in a wet chemical manner. Using a universal testing machine (UTM), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and thermo-gravimetric analysis (TGA), the fabricated samples were characterized. The crystallographic parameters of synthesized hydroxyapatite (HAp) were also estimated through a range of formulas. The optimal amount for hydroxyapatite was 40% according to the findings of the tensile strength (TS), tensile modulus (TM), percentage of elongation at break (EB), bending strength (BS), and bending modulus (BM). Improvements in TS, TM, BS, and BM for the ideal combination were 39.39, 9.21, 912.05, and 259.96%, in each case, over the controlled one. Thermogravimetric analysis (TGA) has been implemented to determine the degradation temperature of the fabricated composites up to 600 °C., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Green synthesis of silver nanoparticles (AgNPs) using a plant extract has attracted significant attention in recent years. It is found as an alternative for other physicochemical approaches because of its simplicity, low cost, and eco-friendly rapid steps. In the present study, Ophiorrhiza mungos ( Om )-mediated AgNPs have been shown to be effective bioadsorbents for methylene blue (MB) dye removal (88.1 ± 1.74%) just after 1 h at room temperature in the dark from an aqueous medium for the first time. Langmuir and Freundlich isotherms fit the experimental results having the correlation coefficient constants R 2 = 0.9956 and R 2 = 0.9838, respectively. From the Langmuir fittings, the maximum adsorption capacity and adsorption intensity were found to be 80.451 mg/g and 0.041, respectively, indicating the excellent performance and spontaneity of the process. Taking both models under consideration, interestingly, our findings indicated a fairly cooperative multilayer adsorption that might have been governed by chemisorption and physisorption, whereas the adsorption kinetics followed the pseudo-second-order kinetics mechanism. The positive and low values of enthalpy (Δ H 0 = 4.91 kJ/mol) confirmed that adsorption is endothermic and physical in nature; however, the negative free energy and positive entropy value (Δ S 0 = 53.69 J/mol K) suggested that the adsorption is spontaneous. The biosynthesized adsorbent was successfully reused up to the fifth cycle. A proposed reaction mechanism for the adsorption process of MB dye onto Om -AgNPs is suggested. The present study may offer a novel finding such as an effective and sustainable approach for the removal of MB dye from water using biosynthesized Om -AgNPs as reusable adsorbents at a comparatively faster rate at a low dose for industrial applications., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Nickel (Ni) doped Mn 3 O 4 nanoparticles (NPs) were synthesized by a quick and facile chemical precipitation technique to investigate their performance in the degradation of methylene blue (MB) in the absence of light. XRD, FESEM, TEM, AAS, XPS, and FT-IR were used for the investigation of the structural, surface morphological, and elemental composition of Ni doped Mn 3 O 4 NPs. XRD confirms the formation of a tetragonal phase structure of pure Mn 3 O 4 and 1% and 3% Ni doped Mn 3 O 4 NPs. However, mixed phases were found in the case of 5 to 10% Ni doped Mn 3 O 4 NPs. Well-defined spherical-shaped morphology was presented through FESEM. Particle sizes decreased linearly (58.50 to 23.68 nm) upon increasing the doping concentration from 0% (pure Mn 3 O 4 ) to 7% respectively, and then increased (48.62 nm) in the case of 10% doping concentration. TEM further confirmed spherical shaped 32 nm nanoparticles for 7% Ni doped Mn 3 O 4 . The elemental composition and oxidation state of the prepared NPs were confirmed by using XPS spectra. Mixed valence Mn 2+ and Mn 4+ states were found in pure Mn 3 O 4 and 1% and 3% Ni doped Mn 3 O 4 NPs in the ratio of 2MnO-MnO 2 . In addition, three different oxidation states Mn 2+ , Mn 3+ , and Mn 4+ were found in 5 to 10% Ni doped Mn 3 O 4 NPs. Moreover, as a dopant Ni exists as Ni 2+ and Ni 3+ states in all Ni doped Mn 3 O 4 NPs. The synthesized NPs were then applied as potent oxidants for the degradation of MB at pH 3. With the increase of doping concentration to 7%, the degree of degradation was increased to 79% in the first 10 min and finally, it became about 98%. The degradation of MB follows the pseudo-first-order linear kinetics with a degradation rate of 0.0342 min -1 ., Competing Interests: The authors declare that they have no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Hilsa shad (Tenualosa ilisha, Hamilton, 1822), the highly coveted table fish within the Indian subcontinent, is Bangladesh's most significant single-species fishery. To assess the risk that toxic metals pose to human health, certain health risk indices-estimated daily intake (EDI), target hazard quotient (THQ), total target hazard quotient (TTHQ), and target cancer risk (TR)-were calculated. The hierarchy of toxic metals (µg/g-ww) in Hilsa shad of the bay showed as Zn (13.64 ± 2.18) > Fe (9.25 ± 1.47) > Mn (2.98 ± 0.75) > Cu (0.57 ± 0.18) > Cr (0.23 ± 0.06) > Pb (0.22 ± 0.04) > As (0.08 ± 0.02) > Ni (0.06 ± 0.02) > Co (0.04 ± 0.01) > Cd (0.01 ± 0.003) in the wet season and Zn (11.45 ± 1.97) > Fe (10.51 ± 1.38) > Mn (3.80 ± 0.75) > Cu (0.73 ± 0.17) > Pb (0.30 ± 0.03) > Cr (0.20 ± 0.05) > As (0.09 ± 0.01) > Ni (0.08 ± 0.02) > Co (0.07 ± 0.02) > Cd (0.02 ± 0.004) in the dry season. The EDI of all the examined trace metals indicated no risk to human health from consuming Hilsa fish. The estimation of THQ and TTHQ suggested that the ingestion of both individual and combined trace metals through Hilsa shad consumption was safe from the perspective of human health. Also, there was no evidence of carcinogenic risk for consumers based on the evaluation of the TR value of metals (As, Pb, Cd, and Ni) due to Hilsa shad consumption., (© 2023. The Author(s).)

This study provides an efficient and straightforward approach to eliminate carbon dioxide (CO 2 ) by absorption using a calcium oxide (CaO) sorbent derived from chicken eggshells. The sorbent concentration, stirring speed, and contact time were varied. The optimal condition for CO 2 removal was a 10% calcium hydroxide (Ca(OH) 2 ) suspension at 600 rpm with 20 min interaction. This optimum condition conferred the ever-highest absorption (98.71%) of CO 2 through Ca(OH) 2 suspensions from eggshell-derived CaO. X-ray diffraction was used to identify crystallographic phases and optimum conditions revealed calcium carbonate (CaCO 3 ) formation with the highest intensity, Fourier transform infrared spectroscopy revealed peaks for the carbonate (CO 3 2- ) group, field emission scanning electron microscopy was used to investigate the morphological and structural properties of the sorbent before and after CO 2 absorption, and thermogravimetric analysis was performed to understand the reaction mechanism. According to the kinetic analysis, the sorbent can be fully decomposed with a minimum activation energy ( E a ) of 89.09 kJ/mol., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) is the gold standard method for SARS-CoV-2 detection, and several qRT-PCR kits have been established targeting different genes of the virus. Due to the high mutation rate of these genes, false negative results arise thus complicating the interpretation of the diagnosis and increasing the need of alternative targets. In this study, an alternative approach for the detection of SARS-CoV-2 viral RNA targeting the membrane (M) gene of the virus using qRT-PCR was described. Performance evaluation of this newly developed in-house assay against commercial qRT-PCR kits was done using clinical oropharyngeal specimens of COVID-19 positive patients. The limit of detection was determined using successive dilutions of known copies of SARS-CoV-2 pseudovirus. The M gene based assay was able to detect a minimum of 100 copies of virus/mL indicating its capacity to detect low viral load. The assay showed comparable accuracy, sensitivity and specificity with commercially available kits while detecting all the variants efficiently. The study concluded that the in-house M gene based assay might be an effective alternative for the currently available commercial qRT-PCR kits., (© 2023. Springer Nature Limited.)

β-tricalcium phosphate (β-TCP) was synthesized in an organic medium (acetone) to obtain a single-phase product while calcium carbonate (CaCO 3 ) and ortho -phosphoric acid (H 3 PO 4 ) were the sources of Ca, and P, respectively. The synthesized β-TCP was characterized by employing a number of sophisticated techniques vis. XRD, FTIR, FESEM, VSM and UV-Vis-NIR spectrometry. On the other hand, cytotoxicity, hemolysis, and antimicrobial activity for Gram-negative as well as Gram-positive ( E. coli and S. aureus ) bacteria were explored using this synthesized sample in powder format. However, to assess the drug loading and releasing profile, these powdered samples were first compressed into disks followed by sintering at 900 °C. Prior to loading the drug, porosity, density, and water absorbance characteristics of the scaffolds were examined in deionized water. Both loading and releasing profiles of the antibiotic (ciprofloxacin) were looked over at various selected time intervals which were continued up to 28 days. The observed results revealed that 2.87% of ciprofloxacin was loaded while 37% of this loaded drug was released within the selected time frame as set in this study. The scaffold was also immersed in SBF solution maintaining identical interim periods for the bioactivity evaluation. Furthermore, all three types of samples ( e.g. drug-loaded, drug-released, and SBF-soaked) were characterized by FESEM and EDX while antimicrobial activity (against E. coli , S. typhi , and S. aureus ) and efficacy to prevent hemolysis were also investigated. The drug-loaded scaffold presented a larger inhibition zone than the standard for all three types of microbes. Although powdered β-TCP was inactive in killing the Gram-negative bacteria, surprisingly the drug-released scaffold showed an inhibition zone., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Zinc Oxide (ZnO) nanoparticles (NPs) obtained a lot of attention from researchers and industries because of their superior properties as an optoelectronic material. Doping, especially tin (Sn), can further fine-tune their optoelectronic properties. In this manuscript, we have reported the optoelectronic properties of Sn-doped ZnO NPs, which were synthesized by a simple chemical solution method. A wide range of dopant (Sn) concentrations were used in the ratios of 0, 1, 3, 5, 7, and 10 weight percent. The effects of dopant (Sn) concentration on the structural, morphological, elemental composition, and optical properties of ZnO NPs were investigated by using an X-ray diffractometer (XRD), Field Emission Scanning Electron Microscope (FESEM), X-ray photoelectron spectrometer (XPS) and UV-Vis-NIR respectively. XRD analysis revealed the shifting of diffraction patterns towards a higher angle along with decreasing intensity. The calculated crystallite size using the XRD varied from 40.12 nm to 28.15 nm with an increasing doping percentage. Sn doping notably influences the size of ZnO NPs, along with crystal quality, strain, and dislocation density. The X-ray photoelectron spectroscopy (XPS) study showed the presence of zinc (Zn), oxygen (O), and tin (Sn) with their preferred oxidation states in the synthesized NPs. UV-Visible spectroscopy (UV-Vis) showed that the bandgap changed from 3.55 to 3.85 eV with the increasing concentration of Sn. FE-SEM revealed that the structures and surfaces were irregular and not homogeneous. The above findings for ZnO nanostructures show their potential application in optoelectronic devices., Competing Interests: The authors declare that they have no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Concentration, source, ecological and health risks of sixteen polycyclic aromatic hydrocarbons (PAHs) were estimated for water and sediment samples of two urban rivers namely Buriganga River (BR) and Dhaleswari River (DR). The mean concentration of ∑PAHs in BR water and sediment were 9619.2 ngL -1 and 351.6 ngg -1 , respectively. Furthermore, the average PAH concentrations detected in DR water and sediment were 1979.1 ngL -1 and 792.9 ngg -1 , respectively. The composition profile showed that 3-ring PAHs were dominant in the water matrix; however, 5-ring PAHs were prevalent in the sediment samples of both rivers. Sources apportion study of PAHs indicated that mixed combustion and petroleum sources are responsible for PAHs contamination in the rivers. Ecological risk study of water suggested that the aquatic lives of both rivers are threatened by Fla, BbF, BkF, DahA, and IcdP, as presented above the threshold level. Comparison with sediment quality guidelines (SQGs) indicated that adverse effects might cause occasionally in the sediment ecosystem in DR at certain sampling sites for Nap, Acy, Fl, Phe, Ant, Pyr, Chr, BaP, and DahA. On the other hand, the presence of Nap, Acy and DahA might occasionally cause adverse biological effects in the BR sediment ecosystem. Estimated hazard quotient (HI > 1) and carcinogenic risk (CR total  > 10 -4 ) values indicated that local inhabitants living in the vicinity of the rivers are prone to high health risks., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 Published by Elsevier Ltd.)

The well-known biomaterial Ca-hydroxyapatite (Hap) in its pristine form holds the top ranking position in the field of biomedical research and extensive investigation is continuing across the globe to enhance its competency. Hence, having the intention to introduce superior physiognomies ( e.g. cytotoxicity, haemocompatibility, and bioactivity coupled with antimicrobial and antioxidant activity) in Hap, in this research work, we exposed Hap to 200 kGy γ-radiation. As a result, γ-radiated Hap exhibited extreme antimicrobial (more than 98%) and moderate (∼34%) antioxidant properties. On the other hand, cytotoxicity and haemocompatibility of γ-radiated Hap were in good agreement with the ISO 10993-5 and ISO 10993-4 standards respectively. Since, bone and joint infections as well as degenerative disorders e.g. osteoarthritis, osteomyelitis, bone injury, and spinal problems have emerged as serious issues and urge a remedial way out, application of γ-radiated Hap could be a promising solution in this regard., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The scarcity of freshwater in most of the megacities in the world is an important concern. In this regard, scientifically harvested rainwater could provide an effective measure to this crisis. In this attempt, we developed a cost-effective sensor-based automated first-flush rainwater harvesting system (RHS) to improve the freshwater scarcity and economic development of megacities like Dhaka, Bangladesh. To investigate the performance of the developed system, a suit of representative rainwater samples was systematically collected, preserved, and assessed between the months of July-December 2021 for water quality parameters such as physicochemical (pH, EC, TDS, DO, hardness, and alkalinity), anions (F - , Cl - , NO 2 - , NO 3 - , Br - , and SO 4 2- ), elemental (Ca, Mg, Cr, As, Cd, Hg, Pb, Be, Ni, Se, and Fe), and microbial contamination analysis. A Multiparameter digital meter and a titrimetric method were employed for measuring the physicochemical properties whereas elemental concentration was detected using an inductively coupled plasma-mass spectrometer and atomic absorption spectrometer. The changes in microbial contamination in the preserved rainwater were investigated from time to time during the whole experimental period. The findings showed that the mean pH (6.90) and concentrations (mg/L) of other concerning parameters such as TDS (15.5), DO (7.26), hardness (14.9), Cl - (3.59), NO 3 - (4.84), SO 4 2- (4.62), Fe (<0.2), Cr (0.086 μg/L), As (0.224 μg/L), Cd (0.260 μg/L), Hg (0.270 μg/L), and Pb (5.530 μg/L) in the harvested rainwater samples were below the WHO drinking water guidelines and literature data implying that the harvested rainwater derived from the developed RHS is completely safe for drinking and other uses even in respect to the microbial contamination (total bacterial counts: 0-15 CFU/mL, and total and fecal coliform less than 1.8 MPN/100 mL) for long storage. Hence, this technology has a huge opportunity to mitigate safe freshwater scarcity and groundwater depletion issues, especially in megacities such as Dhaka, Bangladesh., (© 2023 The Authors.)

Due to rapid urbanization and fast economic development, aerosol pollution is a serious environmental issue, especially in Bangladesh. Based on bioaccessibility and respiratory deposition doses (RDD), health risks of PM 2.5 and PM 10 bound 15 (fifteen) metals were investigated at fourteen urban sites (roadside, marketplace, industrial, and commercial areas). Sampling campaigns were conducted over four seasons (winter, summer, rainy, and autumn) from December 2020 to November 2021. A beta attenuation mass analyzer measured particulate matter concentrations in ambient air. The metals in PM fractions were analyzed by X-ray fluorescence spectroscopy and inductively coupled plasma mass spectrometry (ICP-MS). The airborne trace metals (Cd, As, Zn, Pb, Cr, Cu, Ni) with high enrichment factors indicate anthropogenic sources. The positive matrix factorization (PMF) categorized these elements as originating from automobile exhaust, industrial emissions, and solid waste/coal combustion, whereas the geologic elements came from earth crust/soil dust. During the winter, most of the air mass trajectories arrived from India across the land (82%) and Indo Gangetic Plain (IGP) region to the sampling sites, which may have aided in the transport of pollutants. The deposition flux of metals illustrated that compared to PM 2.5 , PM 10 deposited a higher amount of metals in the upper airways (81.96%). In comparison, PM 2.5 accumulates more elevated amounts of metals in alveolar regions (11.77%), due to the ability of fine particles to penetrate deeper into the lower pulmonary region. Among age groups, an adult inhales a higher amount of metals than a child, on average 0.103 mg and 0.08 mg of metals per day via PM 2.5 , respectively. Acute health impacts are caused by the deposited cancer-causing metals in alveolar tissue, which circulates through the bloodstream and affects several organs. Prolonged exposure to these carcinogenic metals poses significant health risks., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

With an ever-increasing population and unpredictable climate changes, meeting energy demands and maintaining a sustainable environment on Earth are two of the greatest challenges of the future. Biogas can be a very significant renewable source of energy that can be used worldwide. However, to make it usable, upgrading the gas by removing the unwanted components is a very crucial step. CO 2 being one of the major unwanted components and also being a major greenhouse gas must be removed efficiently. Different methods such as physical adsorption, cryogenic separation, membrane separation, and chemical absorption have been discussed in detail in this review because of their availability, economic value, and lower environmental footprint. Three chemical absorption methods, including alkanolamines, alkali solvents, and amino acid salt solutions, are discussed. Their primary works with simple chemicals along with the latest works with more complex chemicals and different mechanical processes, such as the DECAB process, are discussed and compared. These discussions provide valuable insights into how different processes vary and how one is more advantageous or disadvantageous than the others. However, the best method is yet to be found with further research. Overall, this review emphasizes the need for biogas upgrading, and it discusses different methods of carbon capture while doing that. Methods discussed here can be a basic foundation for future research in carbon capture and green chemistry. This review will enlighten the readers about scientific and technological challenges regarding carbon dioxide minimization in biogas technology., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

In this study, the levels of indicator PCBs congeners and PAHs compounds were reported in cow milk from selected areas in Dhaka, Bangladesh, and the potential human health risks were assessed. A total of 100 milk samples were collected and analyzed using gas chromatography-tandem mass spectrometry (GC-MS/MS). Method validation was performed using recovery performance, linearity, limit of detection (LOD), and limit of quantification (LOQ) assays. PCBs congeners, including PCB No. 52 (2,2´,5,5´-tetrachlorobiphenyl), PCB No. 101 (2,2´,4,5,5´-pentachlorobiphenyl), PCB No. 153 (2,2,4,4,5,5-hexachlorobiphenyl), and PCB No 209 (Decachloro-1,1'-biphenyl perchlorobiphenyl) were detected, whereas PCB No 28 (2,2 ´,4-trichlorobiphenyl), PCB No. 138 (2,2´,3,4,4´,5´-hexachlorobiphenyl), and PCB No 180 (2,2´,3,4,4´,5,5´-heptachlorobiphenyl) were not detected in the analyzed milk samples. Among the 16 PAHs compounds, benzo (a) anthracene and chrysene were detected in milk samples. The Σ hazard risk index (HI) of all detected PCBs congeners was below the limit set by the European Food Safety Authority, which indicates limited health risks to animals and humans in the study area. However, the presence of PCBs and PAHs in milk samples from industrial areas may negatively affect human health, and further detailed studies are required to ensure public health safety., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Authors.)