Search

Nearly half a million people die annually due to mosquito-borne diseases. Despite aggressive mosquito population-control efforts, current strategies are limited in their ability to control these vectors. A better understanding of mosquito metabolism through modern approaches can contribute to the discovery of novel metabolic targets and/or regulators and lead to the development of better mosquito-control strategies. Currently, cutting-edge technologies such as gas or liquid chromatography-mass spectrometry-based metabolomics are considered 'mature technologies' in many life-science disciplines but are still an emerging area of research in medical entomology. This review primarily discusses recent developments and progress in the application of mass spectrometry-based metabolomics to answer multiple biological questions related to mosquito metabolism.

An analytical technique was developed for the detection of phosphorus-containing compounds, using high-resolution-accurate-mass (HRAM) LC-MS. This method was constructed as a “flagging” approach for chromatographic peaks of compounds suspected of containing phosphorus, using high-energy in-source CID fragmentation, in parallel with a Full-MS experiment. Selective peak picking is achieved by tracking the highly resolved low m/z product ions of phosphorus-containing products, indicative of several phosphate and phosphonate groups. The chemical formula is then specifically assigned by a simultaneous accurate mass measurement of the precursor ion, together with the confirmed presence of a phosphorus atom in the suspect peak. This new method is demonstrated with various phosphorus-containing compounds such as V-class chemical warfare agents, nerve agents’ degradation products, pesticides, organic phosphates and a phospholipid. For these compounds, the developed method was found to be effective at concentrations as low as 1 ng/mL, in environmental extracts of soil and in urine (in the case of the phospholipid), making it comparable to selective phosphorus detectors such as GC-FPD, but with a much broader scope for charged, polar, or larger compounds.

Negative electrospray ionization tandem mass spectrometry (ESI-MS/MS) is the first choice for detecting and identifying organophosphorus acids such as alkyl methylphosphonic acids, dialkyl phosphates and dialkyl thiophosphates. However, chemical noise in the lower mass regions, ion suppression and poor chromatographic retention of small, highly polar acids render the identification of such acids difficult, especially in complex matrices. To address this difficulty, we evaluated charge- reversal derivatizations of several polar organophosphorus acids with eight commercially- available, mostly pyridine-based reagents, possessing high proton-affinity amines. A simple and generic derivatization procedure of such acids in the presence of potassium carbonate and 18-crown-6 in acetonitrile was developed. After derivatization, the samples were analysed by LC-ESI(+)-MS/MS, and a fragmentation study was carried out. For all derivatizing agents, the resulting acid-derivatives were highly retained by LC and well responded in the ESI⿿MS/MS in the positive-ion mode. However, for several reagents, structural information losses were observed in MS/MS. Interestingly, each derivatizing agent exhibited a different MS/MS behaviour towards the analytes. Some derivatizing agents underwent considerable collision-induced dissociation exclusively at the amine tag portion, while others dissociated at the analyte portion and at the amine portion, depending on the alkyl side chain linked to the oxygen. Only the 3- (bromoacetyl)pyridine derivatives were highly specific and provided rich informative MS/MS spectra. The MS/MS identifications were based on characteristic neutral losses, diagnostic ions for the organophosphorus skeleton, and amine tag-characteristic product ions. This derivatization is beneficial in the identification of target and unknown organophosphorus acids.

Inorganic metal oxides have shown potential as matrices for assisting in laser desorption ionization with advantages over the aromatic acids typically used. Rhenium and tungsten oxides are attractive options due to their high work functions and relative chemical inertness. In this work, it is shown that ReO3 and WO3 , in microparticle (μP) powder forms, can efficiently facilitate ionization of various types of small molecules and provide minimized background contamination at analyte concentrations below 1 ng/µL. This study shows that untreated inorganic WO3 and ReO3 particles are valid matrix options for detection of protonatable, radical, and precharged species under laser desorption ionization. Qualitatively, the WO3 μP showed improved detection of apigenin, sodiated glucose, and precharged analyte choline, while the ReO3 μP allowed better detection of protonated cocaine, quinuclidine, ametryn, and radical ions of polyaromatic hydrocarbons at detection levels as low as 50 pg/µL. For thermometer ion survival yield experiments, it was also shown that the ReO3 powder was significantly softer than α-cyano-4-hydroxycinnaminic acid. Furthermore, it provided higher intensities of cocaine and polyaromatic hydrocarbons, at laser flux values equal to those used with α-cyano-4-hydroxycinnaminic acid.

In Aedes aegypti females, the ammonia released during blood meal digestion is partially metabolized to facilitate the disposal of excess nitrogen. In this study, we used low- and high-resolution liquid chromatography-mass spectrometry (LC/MS) techniques to investigate the role of glucose during ammonia detoxification. Mosquitoes were fed a blood meal supplemented with [1,2-13C2]glucose, and downstream metabolites were measured for 24 h. Quantification of [13C] amino acids in the entire mosquito body was conducted without sample derivatization using selected reaction monitoring of mass transitions that are indicative of the structural position of [13C] atom incorporation. Identification of unlabeled and [13C] isotopologs of 43 compounds, including amino acids, amino acid derivatives, and organic acids, was performed by high-resolution LC/MS techniques. Blood-fed mosquitoes synthesized [13C] metabolites in mainly 2 carbon positions from [1,2-13C2]glucose. [13C2]Ala and [13C2]Pro were the most abundant and rapidly labeled amino acids synthesized. Additional [13C] amino acids, [13C] amino acid derivatives, and [13C] organic acids in 1 or 2 carbon positions were also identified. Two kinetic routes were proposed based on the incorporation of a [13C] atom at position 1 in specific amino acids. Our findings provide evidence that glucose is used for ammonia detoxification and [13C] uric acid synthesis through multiple metabolic pathways, uncovering a metabolic link at the carbon atomic level in ammonia metabolism of A. aegypti.—Horvath, T. D., Dagan, S., Lorenzi, P. L., Hawke, D. H., Scaraffia, P. Y. Positional stable isotope tracer analysis reveals carbon routes during ammonia metabolism of Aedes aegypti mosquitoes.

Glu, Gln, Pro, and Ala are the main amino acids involved in ammonia detoxification in mosquitoes. In order to develop a tandem mass spectrometry method (MS(2)) to monitor each carbon of the above isotopically-labeled (13)C-amino acids for metabolic studies, the compositions and origins of atoms in fragments of the protonated amino acid should be first elucidated. Thus, various electrospray (ESI)-based MS(2) tools were employed to study the fragmentation of these unlabeled and isotopically-labeled amino acids and better understand their dissociation pathways. A broad range of fragments, including previously-undescribed low m/z fragments was revealed. The formulae of the fragments (from m/z 130 down to m/z 27) were confirmed by their accurate masses. The structures and conformations of the larger fragments of Glu were also explored by ion mobility mass spectrometry (IM-MS) and gas-phase hydrogen/deuterium exchange (HDX) experiments. It was found that some low m/z fragments (m/z 27-30) are common to Glu, Gln, Pro, and Ala. The origins of carbons in these small fragments are discussed and additional collision induced dissociation (CID) MS(2) fragmentation pathways are proposed for them. It was also found that small fragments (≤m/z 84) of protonated, methylated Glu, and methylated Gln are the same as those of the underivatized Glu and Gln. Taken together, the new approach of utilizing low m/z fragments can be applied to distinguish, identify, and quantify (13)C-amino acids labeled at various positions, either in the backbone or side chain.

We report a systematic empirical investigation of ESI(+)-MS-MS dissociation pathways of over 1000 spectra of small organic compounds, containing more than 30 chemical functional groups. The dissociation processes of the protonated molecular ions were explored and interpretated. We derived typical basic fragmentation channels for individual functional groups and established a unified set of fragmentation rules. Multiple bond cleavages of molecules containing single and multiple functional groups were explored as well and the corresponding fragmentation rules were derived. Applying these rules enabled to match between proposed chemical structures and an ESI(+)-MS-MS spectrum of an “unknown”. Comparison to EI fragmentation routes was also carried out. Despite the general dissimilarity between ESI(+)-MS-MS and EI-MS spectra, we exploit the minor similarities between the spectra, and utilizing NIST-EI database and search option, can be successfully reduced the number of proposed structures. The two step methodology developed here is demonstrated and evaluated in the identification of various “unknowns”.

The degradation of the warfare agent sulfur mustard (HD) adsorbed onto KF/Al(2)O(3) sorbents is described. These processes were explored by MAS NMR, using (13)C-labeled sulfur mustard (HD*) and LC-MS techniques. Our study on the detoxification of this blister agent showed the formation of nontoxic substitution and less-toxic elimination products (t(1/2) = 3.5-355 h). Interestingly, the reaction rates were found to be affected by MAS conditions, i.e., by a centrifugation effect. The products and the mechanisms of these processes are discussed.

The use of silicon nanoparticles for laser desorption/ionization (LDI) is a new appealing matrix-less approach for the selective and sensitive mass spectrometry of small molecules in MALDI instruments. Chemically modified silicon nanoparticles (30 nm) were previously found to require very low laser fluence in order to induce efficient LDI, which raised the question of internal energy deposition processes in that system. Here we report a comparative study of internal energy deposition from silicon nanoparticles to previously explored benzylpyridinium (BP) model compounds during LDI experiments. The internal energy deposition in silicon nanoparticle-assisted laser desorption/ionization (SPALDI) with different fluorinated linear chain modifiers (decyl, hexyl and propyl) was compared to LDI from untreated silicon nanoparticles and from the organic matrix, α-cyano-4-hydroxycinnamic acid (CHCA). The energy deposition to internal vibrational modes was evaluated by molecular ion survival curves and indicated that the ions produced by SPALDI have an internal energy threshold of 2.8–3.7 eV. This is slightly lower than the internal energy induced using the organic CHCA matrix, with similar molecular survival curves as previously reported for LDI off silicon nanowires. However, the internal energy associated with desorption/ionization from the silicon nanoparticles is significantly lower than that reported for desorption/ionization on silicon (DIOS). The measured survival yields in SPALDI gradually decrease with increasing laser fluence, contrary to reported results for silicon nanowires. The effect of modification of the silicon particle surface with semifluorinated linear chain silanes, including fluorinated decyl (C10), fluorinated hexyl (C6) and fluorinated propyl (C3) was explored too. The internal energy deposited increased with a decrease in the length of the modifier alkyl chain. Unmodified silicon particles exhibited the highest analyte internal energy deposition. These findings may suggest a role of the modifier as a moderator in the energy dissipation and relaxation process. The relatively low internal energy content of SPALDI-produced ions indicates that this is a “soft” desorption technique, with potential advantages in the analysis of labile compounds.

A new method for the fast screening of cocaine and 6-monoacetylmorphine (6-MAM) in a single hair, using gas chromatography/mass spectrometry (GC/MS), is described. The analyses are conducted in less than 10 min with minimal sample preparation. The novel method combines the ChromatoProbe direct sample introduction device for intrainjector thermal extraction, fast GC separation, a supersonic molecular beam GC/MS interface and hyperthermal surface ionization (HSI). The technique has been successfully employed for the detection of cocaine in as little as a 1-mm section of hair using selected ion monitoring (SIM). Unambiguous full scan mass spectra of cocaine and 6-MAM were obtained on a single hair for cocaine and heroin users, respectively. HSI was found to be almost 3 orders of magnitude more selective than electron impact ionization for cocaine compared with the major hair constituents, with a minimum detected concentration of approximately 10 ppb in the SIM mode. Results obtained for 12 drug users showed full qualitative agreement with similar results using rigorous solvent extraction followed by electrospray-liquid chromatography/mass spectrometry analysis. However, quantitative studies showed only partial agreement. No false positives were observed for 10 drug free subjects. This method enables fast drug monitoring along the hair length which permits time correlation studies.

A novel method for fast analysis is presented. It is based on laser desorption injection followed by fast gas chromatography-mass spectrometry (GC-MS) in supersonic molecular beams. The sample was placed in an open air or purged laser desorption compartment, held at atmospheric pressure and near room temperature conditions. Desorption was performed with a XeCl Excimer pulsed laser with pulse energy of typically 3 mJ on the surface. About 20 pulses at 50 Hz were applied for sample injection, resulting in about 0.4 s injection time and one or a few micrograms sample vapor or small particles. The laser desorbed sample was further thermally vaporized at a heated frit glass filter located at the fast GC inlet. Ultrafast GC separation and quantification was achieved with a 50-cm-long megabore column operated with a high carrier gas flow rate of up to 240 mL/min. The high carrier gas flow rate provided effective and efficient entrainment of the laser desorbed species in the sweeping gas. Following the fast GC separation, the sample was analyzed by mass spectrometry in supersonic molecular beams. Both electron ionization and hyperthermal surface ionization were employed for enhanced selectivity and sensitivity. Typical laser desorption analysis time was under 10 s. The laser desorption fast GC-MS was studied and demonstrated with the following sample/matrices combinations, all without sample preparation or extraction: (a) traces of dioctylphthalate plasticizer oil on stainless steel surface and the efficiency of its cleaning; (b) the detection of methylparathion and aldicarb pesticides on orange leaves; (c) water surface analysis for the presence of methylparathion pesticide; (d) caffeine analysis in regular and decaffeinated coffee powder; (e) paracetamol and codeine drug analysis in pain relieving drug tablets; (f) caffeine trace analysis in raw urine; (g) blood analysis for the presence of 1 ppm lidocaine drug. The features and advantages of the laser desorption fast GC-MS are demonstrated and discussed.

Gas chromatography-mass spectrometry (GC-MS) analyses of thermally labile compounds have been studied by using a short column fast gas chromatograph, coupled with fly-through electron ionization in supersonic molecular beams. Thirty-two compounds, which include steroids, carbamate pesticides, antibiotic drugs, and other pharmaceutical compounds, have been analyzed and the details of their GC-MS analysis are provided. The ability to analyze thermally labile compounds is discussed in relation to the speed of analysis. A new term, “speed enhancement factor” (SEF), is defined as the product of column length reduction and the carrier gas linear velocity increase, as compared with normal GC-MS conditions. Fast, very fast, and ultra-fast GC-MS are defined with a SEF in the ranges of 5–30, 30–400, and 400–4000, respectively. Trade-offs in the degree of dissociation, speed, gas chromatograph resolution, and sensitivity were studied and examined with thermally labile molecules. The experimental factors that affect the dissociation are described with emphasis on its reduction. We claim that the use of supersonic molecular beams for sampling and ionization provides the ultimate capability in the GC-MS of thermally labile compounds. The obtained 70-eV electron ionization mass spectra are shown, and an enhanced relative abundance of the molecular ion is demonstrated together with library search capability of these mass spectra, which is better than that reported with particle beam liquid chromatography-mass spectrometry. The performance of fast GC-MS in supersonic molecular beams is compared with other methods of fast GC-MS and with particle beam liquid chromatography-mass spectrometry.

A cluster-based chemical ionization method has been developed that produces protonated molecular ions from molecules introduced through a supersonic molecular beam interface. Mixed clusters of the analyte and a clustering agent (water or methanol) are produced in the expansion region of the beam, and are subsequently ionized by “fly through” electron impact (EI) ionization, which results in a mass spectrum that is a combination of protonated molecular ion peaks together with the conventional EI fragmentation pattern. The technique is presented and discussed as a tool complementary to electron impact ionization in supersonic molecular beams. Surface-induced dissociation on a rhenium oxide surface is also applied to simplify the mass spectra of clusters and reveal the analyte spectrum. The high gas flow rates involved with the supersonic molecular beam interface that enable the easy introduction of the clustering agents also have been used to introduce deuterating agents. An easy-to-use, fast, and routine on-line deuterium exchange method was developed to exchange active hydrogens (NH, OH). This method, combined with electron impact ionization, is demonstrated and discussed in terms of the unique information available through the EI fragmentation patterns, its ability to help in isomer identification, and possible applications with fast gas chromatography-mass spectrometry in supersonic molecular beams.

The electron impact mass spectrometry of straight chain alkanes C8H18-C40H82, squalane, methylstearate, 1-chlorohexadecane, 1-bromohexadecane, and dioctylphthalate was studied by sampling them with supersonic molecular beams. A fly-through Brink-type electron impact ion source was used, utilizing a vacuum background ion filtration technique based on differences between the kinetic energy of the supersonic beam species and that of thermal molecules. The 70-eV electron impact mass spectra of all the alkanes were characterized by a pronounced or dominant molecular weight peak together with all the fragment ions normally exhibited by the standard thermal 70-eV EI mass spectra. In contrast, the NIST library of most of these molecules did not show any molecular weight peak. By eliminating tile intramolecular thermal vibrational energy we gained control over the degree of molecular ion fragmentation by the electron energy. At an electron energy of 18 eV the molecular ion dissociation was further reduced considerably, with only a small absolute reduction in the peak height by less than a factor of 2. The effect of vibrational cooling increased with the molecular size and number of atoms. Pronounced differences were observed between the mass spectra of the straight chain triacontane and its branched isomer squalane. Similar mass spectra of octacosane (C28H58) achieved with 70-eV EI in a supersonic molecular beam were obtained with a magnetic sector mass spectrometer by using an electron energy of 14 eV and an ion source temperature of 150 °C. However, this ion source temperature precluded the gas chromatography-mass spectrometry (GC-MS) of octacosane. The GC-MS of alkanes was studied with an ion trap gas chromatograph-mass spectrometer at an ion source temperature of 230 °C. Thermal peak tailing was observed for C20H42 and heavier alkanes, whereas for C28H58 and heavier alkanes the severe peak tailing made quantitative GC-MS impractical. In contrast, no peak tailing existed even with C40H82 for GC-MS in supersonic molecular beams. The minimum detected amount of eicosane (C20, H42) was shown to be 60 fg. This was demonstrated by using single ion monitoring with the quadrupole mass analyzer tuned to the molecular weight peak of 282 u. The coupling of electron impact mass spectrometry in supersonic molecular beams with hyperthermal surface ionization and a fast GC-MS inlet is briefly discussed.

We report on the high-efficiency surface-induced dissociation of benzene and cyclohexane polyatomic ions after scattering from a rhenium oxide surface with a kinetic energy of 5-290 eV. Rhenium oxide was prepared by directly heating a rhenium metal foil, under 10−5 mbar partial oxygen pressure, at about 1000 K.Rhenium oxide is characterized by a very high work function of 6.4 eV and thus minimizes ion reneutralization probabilities. The catalytic combustion of surface organic impurities with oxygen ensures good long-term stability.We found that the surface-induced dissociation ion current is 70 times larger on rhenium oxide than on bare rhenium or stainless steel. Absolute scattered ion yields of about 50% were measured. The implications of surface-induced dissociation on mass spectrometry in supersonic molecular beams are mentioned.