Search

Retrieving the starting monomer from polymers synthesized by reversible deactivation radical polymerization has recently emerged as an efficient way to increase the recyclability of such materials and potentially enable their industrial implementation. To date, most methods have primarily focused on utilizing high temperatures (typically from 120 °C to 180 °C) to trigger an efficient depolymerization reaction. In this work, we show that, in the presence of Eosin Y under light irradiation, a much faster depolymerization of polymers made by reversible addition-fragmentation chain-transfer (RAFT) polymerization can be triggered even at a lower temperatures (i.e. 100 °C). For instance, green light, in conjunction with ppm amounts of Eosin Y, resulted in depolymerization acceleration of poly(methyl methacrylate) from 16% (thermal depolymerization at 100°C) to 37% within 1 hour, and a final 80% of depolymerization after 8 hours, as confirmed by both 1H-NMR and SEC analysis. The enhanced depolymerization rate was attributed to the activation of the macroCTA from Eosin Y, thus resulting in a faster macroradical generation. Notably, this method was found to be compatible with different wavelengths (e.g. blue, red and white irradiation), solvents, and RAFT agents, thus highlighting the potential of light to significantly improve current depolymerization approaches., Polymer Chemistry, 14 (3), ISSN:1759-9962, ISSN:1759-9954

The synthesis of hydrogels that are based on poly-hydroxyethyl methacrylate, p(HEMA), network semi-interpenetrated with linear polyvinylpyrrolidone (PVP) was optimized in order to allow both a fast preparation and a high cleaning effectiveness of artistic surfaces. For this purpose, the synthesis parameters of the gel with PVP having a high molecular weight (1300 kDa) that were reported in the literature, were modified in terms of temperature, time, and crosslinker amount. In addition, the gel composition was modified by using PVP with different molecular weights, by changing the initiator and by adding maleic anhydride. The modified gels were characterized in terms of equilibrium water content (EWC), water uptake, conversion grade, and thermal properties by differential scanning calorimetry (DSC). The cleaning effectiveness of the gels was studied through the removal of copper salts from laboratory-stained specimens. Cleaning materials were characterized by electron paramagnetic resonance (EPR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, and inductively-coupled plasma-mass spectrometry (ICP-MS). Cleaning was assessed on marble specimens by color variation measurements. The gel synthesis is accelerated by using PVP 360 kDa. The addition of maleic anhydride in the p(HEMA)/PVP network allows the most effective removal of copper salt deposits from marble since it acts as a chelator towards copper ions.

We present an experimental approach to studying the kinetics of polymer nanoparticle formation using molecular rotor molecules as fluorescence probes. By combining fluorescence lifetime analysis and fluorescence correlation spectroscopy, it is possible to simultaneously monitor the evolution of the local environment in the nanoparticles and their size. To assess the generality of the method, we select two common but very different methods for nanoparticle preparation: emulsion-solvent evaporation and miniemulsion polymerization. In both cases, three stages of the nanoparticle formation process were identified on the basis of their polymer content. In the initial stage of the process, the polymer content is low. Then it increases rapidly because of solvent evaporation or polymerization during the second stage. Finally, it reaches a plateau value. Furthermore, significant heterogeneities in the final nanoparticles were found that can be attributed to remaining solvent or monomer and the spatial variation of the polymer-free volume.

Water-in-salt solutions, i.e. solutions in which the amount of salt by volume or weight is larger than that of the solvent, are attracting increasing attention in electrochemistry due to their distinct features that often include decomposition potentials much higher than those of lower concentration solutions. Despite the high solubility of potassium acetate (KAC) in water at room temperature (up to 25 moles of salt per kg of solvent), the low cost, and the large availability, the use of highly concentrated KAC solutions is still limited to a few examples in energy storage applications and a systematic study of their physical-chemical properties is lacking. To fill this gap, we have investigated the thermal, rheological, electrical, electrochemical, and spectroscopic features of KAC/water solutions in the compositional range between 1 and 25 mol kg-1. We show the presence of a transition between the "salt-in-solvent" and "solvent-in-salt" regimes in the range of 10-15 mol kg-1. Among the explored compositions, the highest concentrations (20 and 25 mol kg-1) exhibit good room temperature conductivity values (55.6 and 31 mS cm-1, respectively) and a large electrochemical potential window (above 2.5 V).

The effectiveness of Agar gels for copper stain removal from marble surfaces was systematically studied. Gels with different agar concentrations (1, 3, 5%) and different chelating agents used as additives (ethylenediaminetetraacetic acid, EDTA, and ammonium citrate tribasic, TAC) were tested on laboratory marble specimens for different contact times (30 and 60 min). For better characterization, hydrogels were lyophilised and cryogels were obtained. Systematic comparison of different formulations was feasible on cryogels and performed in terms of: (i) the morphological properties, by field-emission scanning electron microscopy (FE-SEM); (ii) the type of Cu(II)-complexes formed and their quantitative comparison by electron paramagnetic resonance (EPR) spectroscopy; (iii) the total amount of copper removed from marble surfaces, by Inductively Coupled Plasma–Optical Emission Spectrometry (ICP-OES). AgarArt 1% with TAC exhibited the highest effectiveness for copper stain removal after 60 min contact (431 μg/cm2). Such a good cleaning effectiveness can be ascribed to the co-presence of the following properties: efficient metal coordination, which is related to the additive presence, and favourable gel morphology, related both to the gel concentration and to the additive type. In fact, it was observed that both the low gel concentration and the presence of TAC are related to a narrow pore size distribution in gels, besides the possibility of copper coordination. The presence of EDTA results in a broader pore size distribution and in a lower gel strength, with respect to gels with TAC. Thus, a new procedure for studying gels was proposed, which allows to optimize the conditions for metal stain removal from built heritage.

The design and development of contrast agents (CAs) for magnetic resonance imaging (MRI) in clinical analysis is expected to improve the image spatial resolution and to increase the detection sensitivity, especially regarding neurological disorders and cancer disease. In particular, advanced CAs for T1-weighted images are investigated to achieve the sensitive detection of early-stage primary tumors or brain metastases. In this study, we present a strategy toward diagnostic T1 CAs for MRI, based on polymer-modified MnO nanoparticles (NPs). Two different nanosystems were synthesized, consisting of (1) colloidal MnO nanocrystals wrapped by a multidentate amphiphilic polymer and (2) MnO nanocrystals embedded within poly(lactic-co-glycolic acid) (PLGA) NPs. These nanosystems were compared in terms of their MRI contrast power and biological safety. The latter system combines the excellent biocompatibility of PLGA with the unique magnetic properties of MnO NPs and allows sustained contrast enhancement over time. Longitudinal relaxivities of both MnO composite nanomaterials proved to be higher than those of commercial Gd-based CAs and Teslascan, both in phosphate-buffered saline and in plasma, also exhibiting low cytotoxicity. The high relaxation rates achieved with these contrast enhancers are promising toward future application in in vivo imaging.

The localization of the rubber vulcanization reaction close to the silica filler surface was investigated in isoprene rubber composites (IR NCs): the main goal was to highlight the role of curing agents’ dispersion and filler surface features on the spatial propagation of the rubber cross-links and the resulting mechanical behavior of the material. The study was realized by tailoring the morphology of the curing activator, i.e. by vulcanizing IR NCs with Zn@SiO2 double function filler, composed of Zn(II) single sites anchored on SiO2 filler, in comparison to silica filled IR NCs vulcanized with microcrystalline ZnO. The microscopic cross-links distribution was measured by Transmission Electron Microscopy for network visualization (NVTEM) and Time Domain Nuclear Magnetic Resonance (TD-NMR). Besides the NCs mechanical behavior was characterized both at small strain and at fracture. In the presence of Zn@SiO2, higher cross-link density in proximity to SiO2 particles was evidenced, which gradually spreads from the filler surface to the bulk, induced by localization of the Zn(II) centers. IR NCs with Zn@SiO2 resulted stiffer (+45%) and with a lower fracture toughness (less than one third), compared to m-ZnO based NCs, which shows a quite homogeneous structure of the rubber cross-links network. The results highlighted the correlation between the composites structural features and their macroscopic behavior, paving the way to modulating the mechanical properties of elastomeric materials by tuning the nature of the curing agents.

Lithium metal batteries (LMBs) will be a breakthrough in automotive applications, but they require the development of next-generation solid-state electrolytes (SSEs) to stabilize the anode interface. Polymer-in-ceramic PEO/TiO2 nanocomposite SSEs show outstanding properties, allowing unprecedented LMBs durability and self-healing capabilities. However, the mechanism underlying the inhibition/delay of dendrite growth is not well understood. In fact, the inorganic phase could act as both a chemical and a mechanical barrier to dendrite propagation. Combining advanced in situ and ex situ experimental techniques, we demonstrate that oligo(ethylene oxide)-capped TiO2, although chemically inert toward lithium metal, imparts SSE with mechanical and dynamical properties particularly favorable for application. The self-healing characteristics are due to the interplay between mechanical robustness and high local polymer mobility which promotes the disruption of the electric continuity of the lithium dendrites (razor effect).

Ionic liquid (IL) mixtures enable the design of fluids with finely tuned structural and physicochemical properties for myriad applications. In order to rationally develop and design IL mixtures with the desired properties, a thorough understanding of the structural origins of their physicochemical properties and the thermodynamics of mixing needs to be developed. To elucidate the structural origins of the excess molar volume within IL mixtures containing ions with different alkyl chain lengths, 3 IL mixtures containing 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ILs have been explored in a joint small angle X-ray scattering (SAXS) and 129Xe NMR study. The apolar domains of the IL mixtures were shown to possess similar dimensions to the largest alkyl chain of the mixture with the size evolution determined by whether the shorter alkyl chain was able to interact with the apolar domain. 129Xe NMR results illustrated that the origin of excess molar volume in these mixtures was due to fluctuations within these apolar domains arising from alkyl chain mismatch, with the formation of a greater number of smaller voids within the IL structure. These results indicate that free volume effects for these types of mixtures can be predicted from simple considerations of IL structure and that the structural basis for the formation of excess molar volume in these mixtures is substantially different to IL mixtures formed of different types of ions.

Photochemistry has attracted great interest in the last decades in the field of polymer and material science for the synthesis of innovative materials. The merging of photochemistry and reversible-deactivation radical polymerizations (RDRP) provides good reaction control and can simplify elaborate reaction protocols. These advantages open the doors to multidisciplinary fields going from composite materials to bio-applications. Photoinduced Electron/Energy Transfer Reversible Addition-Fragmentation Chain-Transfer (PET-RAFT) polymerization, proposed for the first time in 2014, presents significant advantages compared to other photochemical techniques in terms of applicability, cost, and sustainability. This review has the aim of providing to the readers the basic knowledge of PET-RAFT polymerization and explores the new possibilities that this innovative technique offers in terms of industrial applications, new materials production, and green conditions.

The translational dynamics of xenon gas dissolved in room-temperature ionic liquids (RTILs) is revealed by 129Xe NMR and molecular dynamics (MD) simulations. The dynamic behavior of xenon gas loaded in 1-alkyl-3-methylimidazolium chloride, [CnC1im]Cl (n = 6, 8, 10), and hexafluorophosphate, [CnC1im][PF6] (n = 4, 6, 8, 10) has been determined by measuring the 129Xe diffusion coefficients and NMR relaxation times. The analysis of the experimental NMR data demonstrates that, in these representative classes of ionic liquids, xenon motion is influenced by the length of the cation alkyl chain and anion type. 129Xe spin-lattice relaxation times are well described with a monoexponential function, indicating that xenon gas in ILs effectively experiences a single average environment. These experimental results can be rationalized based on the analysis of classical MD trajectories. The mechanism described here can be particularly useful in understanding the separation and adsorption properties of RTILs.

Lithium Metal Batteries (LMB) require solid or quasi-solid electrolytes able to block dendrites formation during cell cycling. Polymer-in-ceramic nanocomposites with the ceramic fraction exceeding the one normally used as the filler (>10 ÷ 15 wt%) are among the most interesting options on the table. Here, we report on a new hybrid material encompassing brush-like TiO2 nanocrystals functionalized with low molecular weight poly(ethylene oxide) (PEO). The nanocomposite electrolyte membranes are then obtained by blending the brush-like nanocrystals with high molecular weight PEO and LiTFSI. The intrinsic chemical compatibility among the PEO moieties allows a TiO2 content as high as ∼39 wt% (90:10 w/w functionalized nanocrystals/PEO-LiTFSI), while maintaining good processability and mechanical resistance. The 50:50 w/w nanocomposite electrolyte (18.8 wt% functionalized TiO2) displays ionic conductivity of 3 × 10−4 S cm−1 at 70 °C. Stripping/plating experiments show an excellent long-term behavior even at relatively high currents of 200 μA cm−2. Upon testing in a lab-scale Li/electrolyte/LiFePO4 cell, the material delivers 130 mAh g−1 and 120 mAh g−1 after 40 and 50 cycles at 0.05 and 0.1 mA, respectively, with Coulombic efficiency exceeding 99.5%, which demonstrates the very promising prospects of these newly developed nanocomposite solid electrolyte for future development of LMBs.

Membrane modification is becoming ever more relevant for mitigating fouling phenomena within wastewater treatment applications. Past research included a novel low-fouling coating using polymerizable bicontinuous microemulsion (PBM) induced by UV-LED polymerization. This additional cover layer deteriorated the filtration capacity significantly, potentially due to the observed high pore intrusion of the liquid PBM prior to the casting process. Therefore, this work addressed an innovative experimental protocol for controlling the viscosity of polymerizable bicontinuous microemulsions (PBM) before casting on commercial ultrafiltration (UF) membranes. Prior to the coating procedure, the PBM viscosity modulation was carried out by controlled radical polymerization (CRP). The regulation was conducted by introducing the radical inhibitor 2,2,6,6-tetramethylpiperidine 1-oxyl after a certain time (CRP time). The ensuing controlled radical polymerized PBM (CRP-PBM) showed a higher viscosity than the original unpolymerized PBM, as confirmed by rheological measurements. Nevertheless, the resulting CRP-PBM-cast membranes had a lower permeability in water filtration experiments despite a higher viscosity and potentially lower pore intrusion. This result is due to different polymeric structures of the differently polymerized PBM, as confirmed by solid-state nuclear magnetic resonance (NMR) investigations. The findings can be useful for future developments in the membrane science field for production of specific membrane-coating layers for diverse applications.

Diels-Alder chemistry has been used for the thermoreversible cross-linking of furan-functionalized ethylene/propylene (EPM) and ethylene/vinyl acetate (EVM) rubbers. Both furan-functionalized elastomers were successfully cross-linked with bismaleimide to yield products with a similar cross-link density. NMR relaxometry and SAXS measurements both show that the apolar EPM-g-furan precursor contains phase-separated polar clusters and that cross-linking with polar bismaleimide occurs in these clusters. The heterogeneously cross-linked network of EPM-g-furan contrasts with the homogeneous network in the polar EVM-g-furan. The heterogeneous character of the cross-links in EPM-g-furan results in a relatively high Youngs modulus, whereas the more uniform cross-linking in EVM-g-furan results in a higher tensile strength and elongation at break.

Upconversion is a photon-management process especially suited to water-splitting cells that exploit wide-bandgap photocatalysts. Currently, such catalysts cannot utilize 95% of the available solar photons. We demonstrate here that the energy-conversion yield for a standard photocatalytic water-splitting device can be enhanced under solar irradiance by using a low-power upconversion system that recovers part of the unutilized incident sub-bandgap photons. The upconverter is based on a sensitized triplet-triplet annihilation mechanism (sTTA-UC) obtained in a dye-doped elastomer and boosted by a fluorescent nanocrystal/polymer composite that allows for broadband light harvesting. The complementary and tailored optical properties of these materials enable efficient upconversion at subsolar irradiance, allowing the realization of the first prototype water-splitting cell assisted by solid-state upconversion. In our proof-of concept device the increase of the performance is 3.5%, which grows to 6.3% if concentrated sunlight (10 sun) is used. Our experiments show how the sTTA-UC materials can be successfully implemented in technologically relevant devices while matching the strict requirements of clean-energy production.

Photon upconversion based on sensitized triplet-triplet annihilation (sTTA) is considered as a promising strategy for the development of light-managing materials aimed to enhance the performance of solar devices by recovering unused low-energy photons. Here, we demonstrate that, thanks to the fast diffusion of excitons, the creation of triplet pairs in metal-organic framework nanocrystals (nMOFs) with size smaller than the exciton diffusion length implies a 100% TTA yield regardless of the illumination condition. This makes each nMOF a thresholdless, single-unit annihilator. We develop a kinetic model for describing the upconversion dynamics in a nanocrystals ensemble, which allows us to define the threshold excitation intensity Ith box required to reach the maximum conversion yield. For materials based on thresholdless annihilators, Ith box is determined by the statistical distribution of the excitation energy among nanocrystals. The model is validated by fabricating a nanocomposite material based on nMOFs, which shows efficient upconversion under a few percent of solar irradiance, matching the requirements of real life solar technologies. The statistical analysis reproduces the experimental findings, and represents a general tool for predicting the optimal compromise between dimensions and concentration of nMOFs with a given crystalline structure that minimizes the irradiance at which the system starts to fully operate.

Highly controlled polymers and nanostructures are increasingly translated from the lab to the industry. Together with the industrialization of complex systems from renewable sources, a paradigm change in the processing of plastics and rubbers is underway, requiring a new generation of analytical tools. Here, we present the recent developments in time domain NMR (TD-NMR), starting with an introduction of the methods. Several examples illustrate the new take on traditional issues like the measurement of crosslink density in vulcanized rubber or the monitoring of crystallization kinetics, as well as the unique information that can be extracted from multiphase, nanophase and composite materials. Generally, TD-NMR is capable of determining structural parameters that are in agreement with other techniques and with the final macroscopic properties of industrial interest, as well as reveal details on the local homogeneity that are difficult to obtain otherwise. Considering its moderate technical and space requirements of performing, TD-NMR is a good candidate for assisting product and process development in several applications throughout the rubber, plastics, composites and adhesives industry.

Reversible addition-fragmentation chain transfer polymerization of chloroprene on the surface of silica nanoparticles was performed to obtain polychloroprene-grafted-silica nanoparticles (PCP-g-SiO2 NPs). These particles were dispersed in a commercial polychloroprene matrix to obtain PCP nanocomposites with different silica core loadings (1, 5, 10, and 25 wt%). Two different chain graft densities were studied (“low,” 0.022 ch/nm2 and “high,” 0.21 ch/nm2) as a function of the grafted polymer molecular mass. The cured samples showed significant improvement in the mechanical properties of the PCP rubber nanocomposites as compared to the unfilled PCP as measured by standard tensile and dynamic mechanical analysis even with low silica content. The mechanical properties of the nanocomposites were notably enhanced when the graft density was low and grafted molecular masses were high. Transmission electron microscopy (TEM) and Small-Angle X-ray Scattering (SAXS) were used to analyze the dispersion states of the grafted nanoparticles which confirmed the correlation between high grafted chain lengths and improved dispersion states and mechanical properties.

Micro and mesoporous materials are often used in catalysis, purification, composite filler, and other applications. Almond shell is an important agricultural byproduct that can be transformed to microporous and mesoporous carbon. In this work, we produced biochar from almond shell using a thermal treatment procedure in an inert atmosphere and characterized the pores with nitrogen adsorption, environmental SEM, and 129Xe NMR. The latter technique differentiates adsorbed and nonadsorbed xenon and permits the correlation of different processing conditions with xenon adsorption and diffusivity. The relevance of removing the ash produced during the charring process has been included in the study. Moreover, the xenon exchange between meso- and micro-pores has been directly observed by 129Xe NMR, demonstrating that after ash removal by water the materials have high accessibility of the pores by external fluids, thus increasing the usefulness as filtration or adsorption material.

Subtle alterations in the mid-block of polystyrene-b-poly (ethylene-co-butylene)-b-polystyrene (SEBS) have a significant impact on the mechanical properties of the resulting microphase separated materials. In samples with high butylene content, the ethylene-co-butylene (EB) phase behaves as a rubber, as seen by differential scanning calorimetry (DSC), time domain (TD) and Magic Angle Spinning (MAS) NMR, X-ray scattering at small (SAXS), and wide (WAXS) angles. In samples where the butylene content is lower&mdash, but still sufficient to prevent crystallization in bulk EB&mdash, the DSC thermogram presents a broad endothermic transition upon heating from 221 to 300 K. TD NMR, supported by WAXS and dielectric spectroscopy measurements, probed the dynamic phenomena of EB during this transition. The results suggest the existence of a rotator phase for the EB block below room temperature, as a result of nanoconfinement.

Nanocrystals (NCs) surface characterization is a fundamental step for understanding the physical and chemical phenomena involved at the nanoscale. Surface energy and chemistry depend on particle size and composition, and, in turn, determine the interaction of NCs with the surrounding environment, their properties and stability, and the feasibility of nanocomposites. This work aims at extracting more information on the surface of different titanium dioxide polymorphs using1H-TD-NMR of water. Taking advantage of the interaction between water molecules and titanium dioxide NCs, it is possible to correlate the proton transverse relaxation times (T2) as the function of the concentration and the specific surface area (δp·Cm) and use it as an indicator of the crystal phase. Examples of three different crystals phase, rutile, anatase, and brookite, have been finely characterized and their behavior in water solution have been studied with TD-NMR. The results show a linear correlation between relaxivity (R2) and their concentration Cm. The resulting slopes, after normalization for the specific surface, represent the surface/water interaction and range from 1.28 g m-2s-1of 50 nm rutile nanocrystals to 0.52 for similar sized brookite. Even higher slopes (1.85) characterize smaller rutile NCs, in qualitative accordance with the trends of surface energy. Thanks to proton relaxation phenomena that occur at the NCs surface, it is possible to differentiate the crystal phase and the specific surface area of titanium dioxide polymorphs in water solution.

The valorization of vegetable waste can create opportunities to produce new valuable bioplastics.In thisstudy, a one-step process to fully convert a variety of vegetable waste materials into bioplasticfilms is reported. The process is carried out in a diluted aqueous HCl solution at room temperature,it is easily scalable, and with no environmental concerns associated with the use of organic ordangerous chemicals. The generated bioplastics arecompletely biodegradable and environmentallyfriendly. Freestanding, flexible bioplastic films were obtained from vegetable waste like carrot,parsley, radicchio and cauliflower. They have similar mechanical properties with other bioplastics, like thermoplastic starch, and showed to have little migration in a food simulant. The color andthe functional properties (i.e. antioxidant capability) of the starting vegetables are preserved inthe bioplastics, thanks to the mild conditions of the fabrication process. The new conversionprocess allows the blending of the bioplastics with other natural or synthetic polymers, in order to improve their mechanical and gas barrier properties, like the oxygen permability (OP), thusexpanding their field of applications. Poly vinyl alcohol (PVA)/carrot bioplastic film showed an OPof 31.2 cm3 μm m−2 day−1 kPa−1, which is lower than the OP for other synthetic films, like highdensity polyethylene films (HDPE), and similar to edible materials like chitosan. &nbsp

Luminescent solar concentrators serving as semitransparent photovoltaic windows could become an important element in net zero energy consumption buildings of the future. Colloidal quantum dots are promising materials for luminescent solar concentrators as they can be engineered to provide the large Stokes shift necessary for suppressing reabsorption losses in large-area devices. Existing Stokes-shift-engineered quantum dots allow for only partial coverage of the solar spectrum, which limits their light-harvesting ability and leads to colouring of the luminescent solar concentrators, complicating their use in architecture. Here, we use quantum dots of ternary I-III-VI 2 semiconductors to realize the first large-area quantum dot-luminescent solar concentrators free of toxic elements, with reduced reabsorption and extended coverage of the solar spectrum. By incorporating CuInSe x S 2-x quantum dots into photo-polymerized poly(lauryl methacrylate), we obtain freestanding, colourless slabs that introduce no distortion to perceived colours and are thus well suited for the realization of photovoltaic windows. Thanks to the suppressed reabsorption and high emission efficiencies of the quantum dots, we achieve an optical power efficiency of 3.2%. Ultrafast spectroscopy studies suggest that the Stokes-shifted emission involves a conduction-band electron and a hole residing in an intragap state associated with a native defect.

Building-integrated photovoltaics is gaining consensus as a renewable energy technology for producing electricity at the point of use. Luminescent solar concentrators (LSCs) could extend architectural integration to the urban environment by realizing electrode-less photovoltaic windows. Crucial for large-area LSCs is the suppression of reabsorption losses, which requires emitters with negligible overlap between their absorption and emission spectra. Here, we demonstrate the use of indirect-bandgap semiconductor nanostructures such as highly emissive silicon quantum dots. Silicon is non-toxic, low-cost and ultra-earth-abundant, which avoids the limitations to the industrial scaling of quantum dots composed of low-abundance elements. Suppressed reabsorption and scattering losses lead to nearly ideal LSCs with an optical efficiency of η = 2.85%, matching state-of-the-art semi-transparent LSCs. Monte Carlo simulations indicate that optimized silicon quantum dot LSCs have a clear path to η > 5% for 1 m2 devices. We are finally able to realize flexible LSCs with performances comparable to those of flat concentrators, which opens the way to a new design freedom for building-integrated photovoltaics elements. Reabsorption losses in luminescent solar concentrators can be avoided by the use of indirect-bandgap semiconductor nanostructures. The technology has been used to demonstrate flexible luminescent solar concentrators with performance comparable to flat concentrators.

Super paramagnetic iron oxide nanoparticles (SPION) were augmented by both hyaluronic acid (HA) and bovine serum albumin (BSA), each covalently conjugated to dopamine (DA) enabling their anchoring to the SPION. HA and BSA were found to simultaneously serve as stabilizing polymers of Fe₃O₄·DA-BSA/HA in water. Fe₃O₄·DA-BSA/HA efficiently entrapped and released the hydrophobic cytotoxic drug paclitaxel (PTX). The relative amount of HA and BSA modulates not only the total solubility but also the paramagnetic relaxation properties of the preparation. The entrapping of PTX did not influence the paramagnetic relaxation properties of Fe₃O₄·DA-BSA. Thus, by tuning the surface structure and loading, we can tune the theranostic properties of the system.

The formation of ionic liquid (IL) mixtures has been proposed as an approach to rationally fine-tune the physicochemical properties of ILs for a variety of applications. However, the effects of forming such mixtures on the resultant properties of the liquids are only beginning to be understood. Towards a more complete understanding of both the thermodynamics of mixing ILs and the effect of mixing these liquids on their structures and physicochemical properties, the spatial arrangement and free volume of IL mixtures containing the common [C4C1im]+ cation and different anions have been systematically explored using small angle X-ray scattering (SAXS), positron annihilation lifetime spectroscopy (PALS) and 129Xe NMR techniques. Anion size has the greatest effect on the spatial arrangement of the ILs and their mixtures in terms of the size of the non-polar domains and inter-ion distances. It was found that differences in coulombic attraction between oppositely charged ions arising from the distribution of charge density amongst the atoms of the anion also significantly influences these inter-ion distances. PALS and 129Xe NMR results pertaining to the free volume of these mixtures were found to strongly correlate with each other despite the vastly different timescales of these techniques. Furthermore, the excess free volumes calculated from each of these measurements were in excellent agreement with the excess volumes of mixing measured for the IL mixtures investigated. The correspondence of these techniques indicates that the static and dynamic free volume of these liquid mixtures are strongly linked. Consequently, fluxional processes such as hydrogen bonding do not significantly contribute to the free volumes of these liquids compared to the spatial arrangement of ions arising from their size, shape and coulombic attraction. Given the relationship between free volume and transport properties such as viscosity and conductivity, these results provide a link between the structures of IL mixtures, the thermodynamics of mixing and their physicochemical properties.

The present study reports on the preparation and characterization of innovative “self-cleaning” nano-TiO2 treatments to be used in cultural heritage, based on dispersion of solar-light activated TiO2 nanocrystals. The semiconductor has been prepared by an easy and low-cost non-aqueous procedure, providing anatase (NA_TiO2) nanoparticles photo-active not only under UV-light but also under solar irradiation. NA_TiO2 allows obtaining very stable dispersions either in water or in ethylene glycol used to produce homogeneous nano-TiO2 treatments on Noto stone and Carrara marble, which display excellent aesthetic compatibility, do not remarkably affect the capillary water absorption of the stones and slightly increase their wettability. The new treatment exhibits higher photocatalytic activity compared to that based on commercial TiO2 (P25_TiO2). This behavior has been attributed not only to the morphological properties of the treatments and of the stones, but also to the presence of residual benzyl alcohol molecules anchored on the anatase NP surfaces. This provides solar light absorption and partially improves the charge trapping, thus increasing the photoefficiency. The overall results suggest that the positive combination of high dispersion, solar-light absorption and reduced recombination effects in NPs plays a key role in the development of efficient photocatalytic treatments for stone restoration.

We have investigated several building stone materials, including minerals and rocks, using continuous flow hyperpolarized xenon (CF-HP) NMR spectroscopy to probe the surface composition and porosity. Chemical shift and line width values are consistent with petrographic information. Rare upfield shifts were measured and attributed to the presence of transition metal cations on the surface. The evolution of freshly cleaved rocks exposed to the atmosphere was also characterized. The CF-HP 129Xe NMR technique is non-destructive and it could complement currently used techniques, like porosimetry and microscopy, providing additional information on the chemical nature of the rock surface and its evolution. ©2012 by the authors.

Carminic acid, a natural hydrophilic dye extensively used in the food and cosmetic industries, is converted in hydrophobic dyes by acetylation or pivaloylation. These derivatives are successfully used as biocolourants for rubber objects. In this paper, spectroscopic properties of the carminic acid derivatives in dimethyl sulfoxide and in polybutylacrylate are studied by means of photoluminescence and time-resolved photoluminescence decays, revealing a hypsochromic effect due to the presence of bulky substituents as the acetyl or pivaloyl groups. Molecular mechanics and density functional theory calculations confirm the disruption of planarity between the sugar ring and the anthraquinoid system determined by the esterification.

A nanocomposite coating based on TiO2 nanoparticles and poly(2-ethyl-2-oxazoline) is used as consolidant of matte painted surfaces (temperas, watercolors, modern paintings). The aim of this work is to provide advances in the conservation of these works of art, while preserving their optical appearance, in terms of colour and gloss. Fiber Optic Reflectance Spectroscopy (FORS) measurements of a painting-model (an acrylic black monochrome) treated with the nanocomposite coatings revealed that it is possible to match the optical appearance of the painted surface by tuning the amount of nanoparticles in the polymeric matrix. The requirement of retreatability of the material has been verified by removing the nanocomposite cast on the painted surface with aqueous solutions. FTIR and SEM/EDX measurements showed that almost no traces of the nanocomposite remained on the painted surface, allowing its use for the treatment of real paintings. Test were performed using a contemporary studio-model on canvas attributed to Agostino Bonalumi (1935–2013).

Silica-styrene butadiene rubber (SBR) nanocomposites were prepared by using shape-controlled spherical and rod-like silica nanoparticles (NPs) with different aspect ratios (AR = 1-5), obtained by a sol-gel route assisted by a structure directing agent. The nanocomposites were used as models to study the influence of the particle shape on the formation of nanoscale immobilized rubber at the silica-rubber interface and its effect on the dynamic-mechanical behavior. TEM and AFM tapping mode analyses of nanocomposites demonstrated that the silica particles are surrounded by a rubber layer immobilized at the particle surface. The spherical filler showed small contact zones between neighboring particles in contact with thin rubber layers, while anisotropic particles (AR > 2) formed domains of rods preferentially aligned along the main axis. A detailed analysis of the polymer chain mobility by different time domain nuclear magnetic resonance (TD-NMR) techniques evidenced a population of rigid rubber chains surrounding particles, whose amount increases with the particle anisotropy, even in the absence of significant differences in terms of chemical crosslinking. Dynamic measurements demonstrate that rod-like particles induce stronger reinforcement of rubber, increasing with the AR. This was related to the self-alignment of the anisotropic silica particles in domains able to immobilize rubber. This journal is

Molecular arrangement plays a role in the diffusion of water and solutes across soft contact lenses. In particular, the uptake of solutes in hydrated contact lenses can occur as long as free water is available for diffusion. In this work, we investigated the effect of mechanical vibrations of low frequency (200. Hz) on the solute uptake. Hyaluronan, a polysaccharide of ophthalmic use, was taken as example of solute of interest. For a specific water-hydrated hydrogel material, differential scanning calorimetry experiments showed that a large fraction of the hydration water accounted for loosely-bound water, both before and after one week of daily-wear of the lenses. The size (of the order of magnitude of few hundreds of nanometers) of hyaluronan in aqueous solution was found to be less than the size of the pores of the lens observed by scanning electron microscopy. However, solute uptake in already-hydrated lenses was negligible by simple immersion, while a significant increase occurred under mechanical vibrations of 200. Hz, thus providing experimental evidence of mechanically triggered enhanced solute uptake, which is attributed to the release of interfacial loosely-bound water. Also other materials were taken into consideration. However, the effectiveness of mechanical vibrations for hyaluronan uptake is restricted to lenses containing interfacial loosely-bound water. Indeed, loosely-bound water is expected to be bound to the polymer with bonding energies of the order of magnitude of 10-100. J/g, which are compatible with the energy input supplied by the vibrations.

(129)Xe NMR has been recently employed to probe the local structure of ionic liquids (ILs). However, no theoretical investigation has been yet reported addressing the problem of the dependence of the chemical shift of xenon on the cage structure of the IL. Therefore, we present here a study of the chemical shift of (129)Xe in two ionic liquids, [bmim][Cl] and [bmim][PF6], by a combination of classical MD simulations and relativistic DFT calculations of the xenon shielding constant. The bulk structure of the two ILs is investigated by means of the radial distribution functions, paying special attention to the local structure, volume, and charge distribution of the cage surrounding the xenon atom. Relativistic DFT calculations, based on the ZORA formalism, on clusters extracted from the trajectory files of the two systems, yield an average relative chemical shift in good agreement with the experimental data. Our results demonstrate the importance of the cage volume and the average charge surrounding the xenon nucleus in the IL cage as the factors determining the effective shielding.

A study was made of the macrodefect-free (MDF) composite based on aluminate cement and a poly(vinyl alcohol)–poly(vinyl acetate) (PVAc) copolymer by 13C cross-polarization magic-angle-spinning nuclear magnetic resonance. The spectra were run on both the copolymer and the MDF composite in order to observe the atomic environments of the carbon nuclei. An analysis of the intramolecular hydrogen bonds showed a stronger modification in the sample containing CaAl2O4 (CA) than in that containing Ca3Al2O6 (C3A). From the spectra, it was seen that deacetylation had occurred, and that there was interaction between acetate groups and the calcium and aluminium ions. Proton relaxation times both in the laboratory frame, T1(H), and in the rotating frame, T1ρ(H), were exploited for the study of the dimension of the polymer matrix in MDF composites. An extended interphase was identified in the composite containing CA. A comparison with the behaviour of the composite based on silicates Ca3SiO5–PVAc highlights the better mixing of the phases in the MDF composites containing CA.

A novel aldehyde-bearing trithiocarbonate has been synthesized and reacted with carbon nanostructures with different dimensionalities (nanotubes, fullerenes, graphite). The decoration of these carbon nanostructures with trithiocarbonate moieties should provide a powerful tool for the design of advanced carbon nanofillers.

Aqueous dispersions containing TiO2 nanoparticles and hydrophilic poly(2-ethyl-2-oxazoline) allow the preparation of highly transparent nanocomposites containing up to 44 wt% of TiO2. Transmission Electron Microscopy (TEM) images indicate that the nanoparticles are homogeneously distributed in the polymeric matrix with no significant agglomeration. Nanocomposite films remain highly transparent to visible light, absorb the ultraviolet (UV) radiation, and their refractive indices can be regulated in the range from 1.52 to 1.65 by the content of TiO2 nanoparticles. While specular gloss measurements reveal an increase of the root-mean-square (RMS) surface roughness with TiO2 content, distinctness-of-image gloss measurements demonstrate that it does not negatively affect the image information carried by the underlying layer. © 2012 The Royal Society of Chemistry.

The mobility of a series of linear alkanes in their inclusion compound with tris(o-phenylenedioxy)-spirotriphosphazene is studied by high-resolution carbon-proton magic-angle spinning solid-state NMR spectroscopy. Two different carbon-proton dipolar recoupling experiments are compared with respect to their ability to yield precise site-specific, motion-averaged dipolar coupling constants. The most accurate results are obtained by analysis of extrema positions in Lee-Goldburg cross-polarization build-up curves. We present a comprehensive collection of coupling constants, which evidence a rotational motion of the all-trans chains around the channel axis, with some further averaging due to additional fluctuations, as previously found for alkanes in other host matrices such as urea. The order parameter increases toward the inner parts of the chains, and is largely independent of chain length. Notably, chains in a TPP host are not more ordered than in urea, even though the average TPP channel diameter is reported to be smaller. Significantly decreased order is found for highly filled short-alkane samples, which is interpreted in terms of an increased rate of mutual collisions. From residual dipolar couplings as well as carbon chemical shifts, we derive similar amounts of gauche conformers. Translational motions along the channels are further studied by proton double-quantum spectroscopy, which probes guest-host dipolar couplings. The extent of local-scale lateral motion is again correlated with the sample filling, and is a weak function of temperature, as expected from a case in which highly restricted single-file diffusion should dominate the mobility. Characteristic effects of sample aging are apparent in all our experiments.

PEGylation of metal oxide nanoparticles is the common approach to improve their biocompatibility and in vivo circulation time. In this work, we present a combined experimental and theoretical study to determine the operating condition that guarantee very high grafting densities, which are desirable in any biomedical application. Moreover, we present an insightful conformational analysis spanning different coverage regimes and increasing polymer chain lengths. Based on 13C NMR measurements and molecular dynamics simulations, we show that classical and popular models of polymer conformation on surfaces fail in determining the mushroom-to-brush transition point and prove that it actually takes place only at rather high grafting density values.