Search

Gas hydrate is known to have a slowed decomposition rate at ambient pressure and temperatures below the melting point of ice. As hydrate exothermically decomposes, gas is released and water of the clathrate cages transforms into ice. Based on results from the decomposition of three nominally similar methane hydrate samples, the kinetics of two regions, 180-200 and 230-260 K, within the overall decomposition range 140-260 K, were studied by in situ low temperature X-ray powder diffraction. The kinetic rate constants, k(a), and the reaction mechanisms, n, for ice formation from methane hydrate were determined by the Avrami model within each region, and activation energies, E(a), were determined by the Arrhenius plot. E(a) determined from the data for 180-200 K was 42 kJ/mol and for 230-260 K was 22 kJ/mol. The higher E(a) in the colder temperature range was attributed to a difference in the microstructure of ice between the two regions.

A family of inexpensive, Al2O3-forming, high-creep strength austenitic stainless steels has been developed. The alloys are based on Fe-20Ni-14Cr-2.5Al weight percent, with strengthening achieved through nanodispersions of NbC. These alloys offer the potential to substantially increase the operating temperatures of structural components and can be used under the aggressive oxidizing conditions encountered in energy-conversion systems. Protective Al2O3 scale formation was achieved with smaller amounts of aluminum in austenitic alloys than previously used, provided that the titanium and vanadium alloying additions frequently used for strengthening were eliminated. The smaller amounts of aluminum permitted stabilization of the austenitic matrix structure and made it possible to obtain excellent creep resistance. Creep-rupture lifetime exceeding 2000 hours at 750 degrees C and 100 megapascals in air, and resistance to oxidation in air with 10% water vapor at 650 degrees and 800 degrees C, were demonstrated.

Under some conditions, inorganic salts can be as good precursors for sol-gel-type processing as those obtained from expensive metalloorganic precursors such as alkoxides. In this work, the formation of monodispersed hydrous zirconia microsphere particles (particularly nanosized) and gels was achieved in solutions of zirconyl chloride dissolved in alcohol-water mixed solvents. The dielectric property of the mixed alcohol-water solvent directly affects the nucleation and growth of zirconia clusters/particles in homogeneous solutions. A lower dielectric constant of mixed solvent corresponds to a lower solubility of inorganic solute and, thus, a shorter induction period for nucleation as well as higher solid particle growth kinetics. Dynamic light scattering (DLS) was used to monitor the homogeneous nucleation and growth processes, while final particles and gels were studied by scanning electron microscopy (SEM) and high-temperature X-ray diffraction (HTXRD). The sol-gel processes in the mixed solvent system can be adjusted using the processing parameters, including the initial inorganic salt concentration (C), alcohol/aqueous medium volume ratio of the mixed solution (RH), incubation temperature (T), incubation time (t), concentration of hydroxypropyl cellulose (HPC), and ammonia neutralization. Monodispersed submicron and nanoscale (<100 nm) zirconia microspheres/powders were successfully synthesized under conditions of high RH (5) and using HPC (molecular weight of 100,000, 2.0x10(-3) g/cm(3)) and ammonia neutralization. Initial salt concentration affects the particle size significantly. Gel materials were obtained under conditions of low RH (1.0). Microstructure and transparency of gels changed significantly from low (0.05 M) to high (0.2 M) concentration of the metal salt. We have also demonstrated that monodispersed particle production can be achieved not only at low temperatures (<100 degrees C) but also at room temperature using an inorganic salt precursor. Copyright 2000 Academic Press.