Search

Security has been a primary concern in almost all areas of computing and for the devices that are low on computing power it becomes more important. In this paper, a new class of computing device termed as Low Computing Power Device (LCPD) has been defined conceptually. The paper brings out common attributes, security requirements and security challenges of all kinds of low computing power devices in one place so that common security solutions for these can be designed and implemented rather than doing this for each individual device type. A survey of existing recent security solutions for different LCPDs hasve been presented here. This paper has also provided possible security solutions for LCPDs which include identification of countermeasures against different threats and attacks on these devices, and choosing appropriate cryptographic mechanism for implementing the countermeasures efficiently.

Providing security has been always on priority in all areas of computing and communication, and for the systems that are low on computing power, implementing appropriate and efficient security mechanism has been a continuous challenge for the researchers. Radio Frequency Identification (RFID) system is such an environment, which requires the design and implementation of efficient security mechanism. Earlier, the security protocols for RFID based on hash functions and symmetric key cryptography have been proposed. But, due to high strength and requirement of less key size in elliptic curve cryptography, the focus of researchers has been on designing efficient security protocol for RFID based on elliptic curves. In this paper, an efficient elliptic curve signcryption based security protocol for RFID has been proposed, which provides mutual authentication, confidentiality, non-repudiation, integrity, availability, forward security, anonymity, and scalability. Moreover, the proposed protocol successfully provides resistance from replay attack, impersonation attack, location tracking attack, de-synchronization attack, denial of service attack, man-in-the-middle attack, cloning attack, and key-compromise attack. Results have revealed that the proposed protocol is efficient than the other related protocols as it takes less computational time and storage cost, especially for the tag, making it ideal to be used for RFID systems. [ABSTRACT FROM AUTHOR]

Checkpoints are cellular surveillance and signaling pathways that coordinate the response to DNA damage and replicative stress. Consequently, failure of cellular checkpoints increases susceptibility to DNA damage and can lead to profound genome instability. This study examines the role of a human RECQ helicase, WRN, in checkpoint activation in response to DNA damage. Mutations in WRN lead to genomic instability and the premature aging condition Werner syndrome. Here, the role of WRN in a DNA-damage-induced checkpoint was analyzed in U-2 OS (WRN wild type) and isogenic cells stably expressing WRN-targeted shRNA (WRN knockdown). The results of our studies suggest that WRN has a crucial role in inducing an S-phase checkpoint in cells exposed to the topoisomerase I inhibitor campthothecin (CPT), but not in cells exposed to hydroxyurea. Intriguingly, WRN decreases the rate of replication fork elongation, increases the accumulation of ssDNA and stimulates phosphorylation of CHK1, which releases CHK1 from chromatin in CPT-treated cells. Importantly, knockdown of WRN expression abolished or delayed all these processes in response to CPT. Together, our results strongly suggest an essential regulatory role for WRN in controlling the ATR-CHK1-mediated S-phase checkpoint in CPT-treated cells. [ABSTRACT FROM AUTHOR]

Introduction: To ensure that the evidence generated by health technology assessment (HTA) is translated to policy, it is important to generate a threshold value against which the outcomes of HTA studies can be compared. In this context, the present study delineates the methods that will be deployed to estimate such a value for India., Methods and Analysis: The proposed study will deploy a multistage sampling approach considering economic and health status for selection of states, followed by selection of districts based on Multidimensional Poverty Index (MPI) and identification of primary sampling units (PSUs) using the 30-cluster approach. Further, households within PSU will be identified using systematic random sampling and block randomisation based on gender will be done to select respondent from the household. A total of 5410 respondents will be interviewed for the study. The interview schedule will comprise of three sections including background questionnaire to elicit socioeconomic and demographic characteristics, followed by assessment of health gains, and willingness to pay (WTP). To assess the health gains and corresponding WTP, the respondent will be presented with hypothetical health states. Using time trade off method, the respondent will indicate the amount of time he/she is willing to give up at the end of life to avoid morbidities in the hypothetical health condition. Further, respondents will be interviewed about their WTP for treatment of respective hypothetical conditions using contingent valuation technique. These estimates of health gains and corresponding WTP will then be combined to ascertain the value of WTP per quality-adjusted life year., Ethics and Dissemination: The ethical approval has been obtained from the Institutional Ethics Committee (IEC) of Postgraduate Institute of Medical Education and Research, Chandigarh, India. The study outcomes will be made available for general use and interpretation of HTA studies commissioned by India's central HTA Agency., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2023. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Wet ball milling was used for the synthesis of Cu 2 ZnSnSe 4 (CZTSe) nanoparticles with a kesterite structure. The prepared nanoparticles were used for ink formulation. Surfactants and binders were added to improve the ink stability, prevent agglomeration, and enhance ink adhesion. The films deposited via spin coating were annealed at different temperatures using a rapid thermal processing system in the presence of selenium powder in an inert environment. Analytical techniques, such as X-ray diffraction, Raman spectroscopy, and Fourier-transform infrared spectroscopy, were used to confirm the formation of CZTSe nanoparticles with a single-phase, crystalline kesterite structure. Field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy were used to study the surface morphology and chemical composition of the thin films before and after annealing, with and without the sodium solution. The optoelectrical properties were investigated using ultraviolet-visible spectroscopy and Hall measurements. All the prepared CZTSe thin films exhibited a p-type nature with an optical bandgap in the range of 0.82-1.02 eV. The open-circuit voltage and fill factor of the CZTSe-based devices increased from 266 to 335 mV and from 37.79% to 44.19%, respectively, indicating a decrease in the number of recombination centers after Na incorporation.

In the present study, we adopt an easy and cost-effective route for preparing Cu 2 ZnSnS 4 (CZTS)-absorber nanoparticles by a mechanochemical method using non-toxic and environmentally benign solvents (butanol, methyl ethyl ketone, and ethanol). The gram-scale synthesis of absorber nanoparticles was achieved in a non-hazardous, zero-waste process without using high-vacuum equipment. The effects of annealing and Na incorporation on the properties of spin-coated CZTS thin films were scrutinized. The deposited samples showed kesterite crystal structure and single phase. The morphological results revealed an improvement in the surface morphology after annealing. The optical bandgaps of the thin films lied in the range of 1.50-1.57 eV with p-type nature. Finally, photovoltaic devices were fabricated, and their cell performance parameters were studied. An efficiency of 0.16% was observed. The present study provides a potential route for the cost-effective fabrication of CZTS-based photovoltaic devices.

Background: Students act as messengers in delivering effective messages for better uptake of health-promoting behavior. Understanding their knowledge about coronavirus disease 2019 (COVID-19), intentions to use the COVID-19 vaccine, and its associated factors will help develop promising strategies in vaccine promotion concerning the current COVID-19 pandemic. Methods: A cross-sectional online survey was carried out among students in the healthcare and non-healthcare sectors to assess their intentions to get vaccinated against the COVID-19. A non-probability snowball sampling technique was used to recruit study participants ( N = 655) through social media platforms and emails. Study participants were recruited across the country, including six major geographical regions (Eastern, Western, Northern, Southern, North-east, and Central) in India between November 2020 and January 2021 before the introduction of the COVID-19 vaccine. Descriptive statistics were used to present the sociodemographic, and vaccine-related behaviors of the study participants. Key determinants that likely predict vaccine acceptance among students were modeled using logistic regression analysis. For each analysis, p < 0.05 was considered significant. Results: A total of 655 students were recruited, 323 from healthcare and 332 from non-healthcare sectors, to assess their intentions to receive the COVID-19 vaccine. Of the 655 students, 63.8% expressed intentions to receive the COVID-19 vaccine. The acceptance was higher among non-healthcare students (54.07 vs. 45.93%). At the time of the study, 27.8% of the students indicated that they had been exposed to a confirmed COVID-19 patient. A vast majority (93.4%) of the students knew about the COVID-19 virus, and most (89.3%) of them were aware of the development of a COVID-19 vaccine. The history of vaccine hesitancy was found to be low (17.1%). Only one-third (33.4%) of the students showed concern about contracting COVID-19. Trust in the healthcare system [adjusted odds ratio (aOR): 4.13; (95% CI: 2.83-6.04), p < 0.00] and trust in domestic vaccines [aOR: 1.46; (95% CI: 1.02-2.08), p < 0.05] emerged as the significant predictors of student's intention to get vaccinated. Higher acceptance for vaccine was observed among students in the non-healthcare [aOR: 1.982; 95% CI: 1.334-2.946, p < 0.00]. Conclusion: This study shows that the Indian college students had relatively high levels of positive intentions to receive COVID-19 vaccines, although about one-third were not sure or unwilling to receive the vaccine, highlighting possible vaccine hesitancy. Informational campaigns and other strategies to address vaccine hesitancy are needed to promote uptake of COVID-19 vaccines., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Jain, Vij, Satapathy, Chakrapani, Patro, Kar, Singh, Pala, Sankhe, Modi, Bali, Rustagi, Rajagopal, Kiran, Goel, Aggarwal, Gupta and Padhi.)

Introduction: Quality-adjusted life year (QALY) has been recommended by the government as preferred outcome measure for Health Technology Assessment (HTA) in India. As country-specific health-related quality of life tariff values are essential for accurate measurement of QALYs, the government of India has commissioned the present study. The aim of this paper is to describe the methods for the Development of an EQ-5D Value set for India using an Extended design (DEVINE) Study. Additionally, this study aspires to establish if the design of 10-time trade-off (TTO) blocks is enough to generate valid value sets., Methods and Analysis: A cross-sectional survey using the EuroQol Group's Valuation Technology (EQ-VT) will be undertaken in a sample of 2700 respondents selected from six different states of India using a multistage stratified random sampling technique. The participants will be interviewed using computer-assisted personal interviewing technique. The TTO valuation will be done using 10 composite TTO (c-TTO) tasks and 7 discrete choice experiment (DCE) tasks. Hybrid modelling approach using both c-TTO and DCE data to estimate the potential value set will be applied. Values of all 3125 health states will be predicted using both the conventional EQ-VT design of 10 blocks of 10 TTO tasks, and an extended design of 18 blocks of 10 TTO tasks. The potential added value of the eight additional blocks in overall validity will be tested. The study will deliver value set for India and assess the adequacy of existing 10-blocks design to be able to correctly predict the values of all 3125 health states., Ethics and Dissemination: The ethical approval has been obtained from Institutional Ethics Committee of PGIMER, Chandigarh, India. The anonymised EQ-5D-5L value set will be available for general use and in the HTAs commissioned by India's central HTA Agency., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2020. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Polyphenols can exert both, antioxidant and pro-oxidant properties, depending on cell types as well as their concentrations. Hence, it was of interest to examine if the naturally occurring resveratrol analog, trans-4,4'-dihydroxystilbene (DHS) also exert both these activities in a biphasic or cell-specific manner. In this study, we established the cytoprotective action of DHS against hydrogen peroxide (H2O2)-induced apoptotic death of the PC12 cells. DHS reduced mitochondrial membrane permeabilization and deactivated reactive oxygen species (ROS)-mediated caspase-3 activation in the H2O2-treated PC12 cells. However, it induced apoptosis in the human neuroblastoma SHSY-5Y cell line by destabilizing mitochondrial membrane, augmenting ROS and activating caspapse-3. DHS showed better activity than resveratrol in both the chosen models.

Cutaneous tuberculosis forms a subset of extra pulmonary tuberculosis. It accounts for about 1.5% of all the cases of extrapulmonary tuberculosis. Lichen Scrofulosorum is a rare form of cutaneous tuberculosis. It is usually seen in children or young adults and an important marker of occult tuberculosis. Usually, the eruption appears in children and adolescents with strong immune sensitivity to Mycobacterium tuberculosis and consists of tiny follicular papules. Underlying systemic involvement is more common in children, compared with adults. We report a case of 3 years old boy who was investigated for pyrexia of unknown origin and finally diagnosed as Lichen Scrofulosorum associated with tuberculous lymphadenitis of mediastinal lymph nodes. A skin biopsy showed extensive tuberculoid granulomas surrounding hair follicles which were consistent with the diagnosis of Lichen Scrofulosorum. The child was treated with antitubercular drugs and it showed improvement within 2 weeks of starting treatment with resolution of skin lesions.

Introduction: Fibroadenomas are among the most common tumours of the female breast, occurring most frequently in women of child-bearing age, especially those under 30 years., Presentation of Case: We report a case with a total of 27 fibroadenomas presenting bilaterally of a 46-year-old woman. The histopathologic and immunophenotypic features of the fibroadenomata are described., Discussion: Most fibroadenomas are present as single mass, however the presence of multiple fibroadenomata can be seen in 15-20% of the patients. It has been reported that the average number of masses in cases of multiple fibroadenomas is 3-4 in a single breast but occurrence of more than five fibroadenomas in an individual patient is much less common., Conclusion: There are few reports of multiple fibroadenomas. We report this case hoping to expand the literature and to provide insight to aetiology of multiple fibroadenoma formation and advice on management., (Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Introduction: Follicular carcinoma of thyroid usually behaves in an indolent manner with low metastatic potential. Distant metastases as initial presentation is rare in follicular carcinoma; especially in young patients., Presentation of Case: We report the clinical, pathological features and the management of three different cases of follicular carcinoma of the thyroid with unusual presentations at the time of diagnosis. First case presented as thyroid abscess, second case with a large skull swelling in a pre-exiting goiter and the third case with a swelling in the sternum., Discussion: Follicular carcinoma of thyroid is the second category of well-differentiated thyroid cancer that constitutes about 10% of all thyroid malignancies. Blood borne metastasis is common with spread to lung, bone and other solid organs. In less than 10% cases of follicular carcinoma, there is evidence of lymphatic involvement. The patients' presentations above are highly unusual., Conclusion: Recognizing these cases has a significant impact on clinical decision-making and prognosis of the patients. Treatment in these patients should be individualized and an alternative therapeutic approach should be considered., (Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background. Food frequency questionnaires (FFQs) have been used in epidemiological studies across the world to capture the usual food intake of individuals. As food habits vary in different population groups, FFQs should be validated before use. Hence, we determined the reproducibility and validity of FFQs designed for urban and rural populations of northern India. Methods. Separate FFQs, designed for urban and rural populations using standard methods, were administered to a sample of 200 subjects (100 urban and 100 rural) in the age group of 35-70 years in the beginning (baseline FFQ) of the study and after an interval of 1 year (1-year FFQ) to assess their reproducibility. Six 24-hour dietary-recalls, taken at an interval of 2 months over a period of 1 year, were used as a reference method to test the validity. Crude and energy- adjusted nutrient intakes estimated from FFQs and 24-hour dietary-recalls were compared using Pearson correlation coefficients. Bland and Altman plots were also used to test the agreement between the two methods. Results. Nutrient intakes were found to be similar at the baseline and 1-year FFQs in urban and rural areas. The unadjusted Pearson correlation between 24-hour dietary- recalls and 1-year FFQ ranged from 0.22 for vitamin C to 0.63 for iron in the urban area. It ranged from 0.06 for vitamin C to 0.74 for energy in the rural area. The correlations lowered after adjusting for energy and there was a minimal increase after de-attenuation. Conclusion. The FFQs were reproducible and valid for assessing nutrient intakes except for some micronutrients., (Copyright 2013, NMJI.)

A new rapid, simple, sensitive, selective and accurate reversed-phase stability-indicating Ultra Performance Liquid Chromatography (RP-UPLC) technique was developed for the assay of Tolterodine Tartrate in pharmaceutical dosage form, human plasma and urine samples. The developed UPLC method is superior in technology to conventional HPLC with respect to speed, solvent consumption, resolution and cost of analysis. Chromatographic run time was 6 min in reversed-phase mode and ultraviolet detection was carried out at 220 nm for quantification. Efficient separation was achieved for all the degradants of Tolterodine Tartrate on BEH C18 sub-2-μm Acquity UPLC column using Trifluoroacetic acid and acetonitrile as organic solvent in a linear gradient program. The active pharmaceutical ingredient was extracted from tablet dosage form using a mixture of acetonitrile and water as diluent. The calibration graphs were linear and the method showed excellent recoveries for bulk and tablet dosage form. The test solution was found to be stable for 40 days when stored in the refrigerator between 2 and 8 °C. The developed UPLC method was validated and meets the requirements delineated by the International Conference on Harmonization (ICH) guidelines with respect to linearity, accuracy, precision, specificity and robustness. The intra-day and inter-day variation was found be less than 1%. The method was reproducible and selective for the estimation of Tolterodine Tartrate. Because the method could effectively separate the drug from its degradation products, it can be employed as a stability-indicating one.