Search

The compaction quality of subgrade filler strongly affects subgrade settlement. The main objective of this research is to analyze the macro- and micro-mechanical compaction characteristics of subgrade filler based on the real shape of coarse particles. First, an improved Viola–Jones algorithm is employed to establish a digitalized 2D particle database for coarse particle shape evaluation and discrete modeling purposes of subgrade filler. Shape indexes of 2D subgrade filler are then computed and statistically analyzed. Finally, numerical simulations are performed to quantitatively investigate the effects of the aspect ratio (AR) and interparticle friction coefficient (μ) on the macro- and micro-mechanical compaction characteristics of subgrade filler based on the discrete element method (DEM). The results show that with the increasing AR, the coarse particles are narrower, leading to the increasing movement of fine particles during compaction, which indicates that it is difficult for slender coarse particles to inhibit the migration of fine particles. Moreover, the average displacement of particles is strongly influenced by the AR, indicating that their occlusion under power relies on particle shapes. The displacement and velocity of fine particles are much greater than those of the coarse particles, which shows that compaction is primarily a migration of fine particles. Under the cyclic load, the interparticle friction coefficient μ has little effect on the internal structure of the sample; under the quasi-static loads, however, the increase in μ will lead to a significant increase in the porosity of the sample. This study could not only provide a novel approach to investigate the compaction mechanism but also establish a new theoretical basis for the evaluation of intelligent subgrade compaction. [ABSTRACT FROM AUTHOR]

The morphology of graded crushed stone (GCS) particles has an essential influence on the performance of aggregate mixtures. The impact of particle shape is a comprehensive effect that cannot be considered separately, leading to difficulties in establishing the relationship between the mixture properties and the aggregate morphology by using laboratory methods. The discrete element method (DEM) is an effective way widely adopted to reconstruct the morphology of particles and simulate performance tests of granular materials. However, selecting limited particles characterizing a real particle-assembly for simulation is still a challenge in current research due to the inherent rich variability of particle shapes. In this study, based on the acquisition of three-dimensional (3D) aggregate shapes by using laser scanning, ellipsoid index (EDI) translating the particle shape as a function of surface area, volume, and contour length is proposed to comprehensively evaluate aggregate morphology. Further, a particle library capable of characterizing aggregate morphology distribution is established based on the statistics of the corresponding morphological characteristics of particle samples. The model reliability is validated by carrying out a series of experimental and numerical penetration tests with nine different gradations. The established particle library can be used to model aggregate mixtures and the proposed simulation framework is promising for optimizing the mixture gradation design numerically.

Abstract The compaction quality of subgrade filler strongly affects subgrade settlement. The main objective of this research is to analyze the macro- and micro-mechanical compaction characteristics of subgrade filler based on the real shape of coarse particles. First, an improved Viola–Jones algorithm is employed to establish a digitalized 2D particle database for coarse particle shape evaluation and discrete modeling purposes of subgrade filler. Shape indexes of 2D subgrade filler are then computed and statistically analyzed. Finally, numerical simulations are performed to quantitatively investigate the effects of the aspect ratio (AR) and interparticle friction coefficient (μ) on the macro- and micro-mechanical compaction characteristics of subgrade filler based on the discrete element method (DEM). The results show that with the increasing AR, the coarse particles are narrower, leading to the increasing movement of fine particles during compaction, which indicates that it is difficult for slender coarse particles to inhibit the migration of fine particles. Moreover, the average displacement of particles is strongly influenced by the AR, indicating that their occlusion under power relies on particle shapes. The displacement and velocity of fine particles are much greater than those of the coarse particles, which shows that compaction is primarily a migration of fine particles. Under the cyclic load, the interparticle friction coefficient μ has little effect on the internal structure of the sample; under the quasi-static loads, however, the increase in μ will lead to a significant increase in the porosity of the sample. This study could not only provide a novel approach to investigate the compaction mechanism but also establish a new theoretical basis for the evaluation of intelligent subgrade compaction.