Search

NASA's Global Ecosystem Dynamics Investigation (GEDI) is collecting spaceborne full waveform lidar data with a primary science goal of producing accurate estimates of forest aboveground biomass density (AGBD). This paper presents the development of the models used to create GEDI's footprint-level (~25 m) AGBD (GEDI04_A) product, including a description of the datasets used and the procedure for final model selection. The data used to fit our models are from a compilation of globally distributed spatially and temporally coincident field and airborne lidar datasets, whereby we simulated GEDI-like waveforms from airborne lidar to build a calibration database. We used this database to expand the geographic extent of past waveform lidar studies, and divided the globe into four broad strata by Plant Functional Type (PFT) and six geographic regions. GEDI's waveform-to-biomass models take the form of parametric Ordinary Least Squares (OLS) models with simulated Relative Height (RH) metrics as predictor variables. From an exhaustive set of candidate models, we selected the best input predictor variables, and data transformations for each geographic stratum in the GEDI domain to produce a set of comprehensive predictive footprint-level models. We found that model selection frequently favored combinations of RH metrics at the 98th, 90th, 50th, and 10th height above ground-level percentiles (RH98, RH90, RH50, and RH10, respectively), but that inclusion of lower RH metrics (e.g. RH10) did not markedly improve model performance. Second, forced inclusion of RH98 in all models was important and did not degrade model performance, and the best performing models were parsimonious, typically having only 1-3 predictors. Third, stratification by geographic domain (PFT, geographic region) improved model performance in comparison to global models without stratification. Fourth, for the vast majority of strata, the best performing models were fit using square root transformation of field AGBD and/or height metrics. There was considerable variability in model performance across geographic strata, and areas with sparse training data and/or high AGBD values had the poorest performance. These models are used to produce global predictions of AGBD, but will be improved in the future as more and better training data become available.

Tomographic Synthetic Aperture Radar (SAR) allows the reconstruction of the 3D radar reflectivity of forests from a large(r) number of multi-angular acquisitions. However, in most practical implementations it suffers from limited vertical resolution and/or reconstruction artefacts as the result of non-ideal acquisition setups. Polarisation Coherence Tomography (PCT) offers an alternative to traditional tomographic techniques that allow the reconstruction of the low-frequency 3D radar reflectivity components from a small(er) number of multi-angular SAR acquisitions. PCT formulates the tomographic reconstruction problem as a series expansion on a given function basis. The expansion coefficients are estimated from interferometric coherence measurements between acquisitions. In its original form, PCT uses the Legendre polynomial basis for the reconstruction of the 3D radar reflectivity. This paper investigates the use of new basis functions for the reconstruction of X-band 3D radar reflectivity of forests derived from available lidar waveforms. This approach enables an improved 3D radar reflectivity reconstruction with enhanced vertical resolution, tailored to individual forest conditions. It also allows the translation from sparse lidar waveform vertical reflectivity information into continuous vertical reflectivity estimates when combined with interferometric SAR measurements. This is especially relevant for exploring the synergy of actual missions such as GEDI and TanDEM-X. The quality of the reconstructed 3D radar reflectivity is assessed by comparing simulated InSAR coherences derived from the reconstructed 3D radar reflectivity against measured coherences at different spatial baselines. The assessment is performed and discussed for interferometric TanDEM-X acquisitions performed over two tropical Gabonese rainforest sites: Mondah and Lopé. The results demonstrate that the lidar-derived basis provides more physically realistic vertical reflectivity profiles, which also produce a smaller bias in the simulated coherence validation, compared to the conventional Legendre polynomial basis. [ABSTRACT FROM AUTHOR]

Recently, polarimetric synthetic aperture radar (SAR) interferometry has generated much interest for forest applications. Forest heights and ground topography can be extracted based on interferometric coherence using a random volume over ground coherent mixture model. The coherence estimation is of paramount importance for the accuracy of forest height estimation. The coherence (or correlation coefficient) is a statistical average of neighboring pixels of similar scattering characteristics. The commonly used algorithm is the boxcar filter, which has the deficiency of indiscriminate averaging of neighboring pixels. The result is that coherence values are lower than they should be. In this paper, we propose a new algorithm to improve the accuracy in the coherence estimation based on speckle filtering of the 6 x 6 polarimetric interferometry matrix. Simulated images are used to verify the effectiveness of this adaptive algorithm. German Aerospace Center (DLR) L-Band E-SAR data are applied to demonstrate the improved accuracy in coherence and in forest height estimation. Index Terms--Coherence estimation, forest parameter inversion, polarimetric interferometry, synthetic aperture radar (SAR) speckle filtering.

The objective of this paper is to examine the application of single-baseline polarimetric SAR interferometry to the remote sensing and measurement of structure over forested terrain. For this, a polarimetric coherent scattering model for vegetation cover suitable for the estimation of forest parameters from interferometric observables is introduced, discussed and validated. Based on this model, an inversion algorithm which allows the estimation of forest parameters such as tree height, average extinction, and underlying topography from single-baseline fully polarimetric interferometric data is addressed. The performance of the inversion algorithm is demonstrated using fully polarimetric single baseline experimental data acquired by DLR's E-SAR system at L-band. Index Terms--Forest parameter inversion, polarimetric interferometry, radar polarimetry, synthetic aperture radar (SAR) interferometry.

In this paper, we examine the role of polarimetry in synthetic aperture radar (SAR) interferometry. We first propose a general formulation for vector wave interferometry that includes conventional scalar interferometry as a special case. Then, we show how polarimetric basis transformations can be introduced into SAR interferometry and applied to form interferograms between all possible linear combinations of polarization states. This allows us to reveal the strong polarization dependency of the interferometric coherence. We then solve the coherence optimization problem involving maximization of interferometric coherence and formulate a new coherent decomposition for polarimetric SAR interferometry that allows the separation of the effective phase centers of different scattering mechanisms. A simplified stochastic scattering model for an elevated forest canopy is introduced to demonstrate the effectiveness of the proposed algorithms. In this way, we demonstrate the importance of wave polarization for the physical interpretation of SAR interferograms. We investigate the potential of polarimetric SAR interferometry using results from the evaluation of fully polarimetric interferometric shuttle imaging radar (SIR)-C/X-SAR data collected during October 8-9, 1994, over the SE Baikal Lake Selenga delta region of Buriatia, Southeast Siberia, Russia. Index Terms - Polarimetric interferometry, radar polarimetry, synthetic aperture radar (SAR), SAR interferometry.

In this paper, we exploit the interferometric multifrequency potentiality of the SIR-C/X-SAR system which is equipped with an L-, C-, and X-band sensor. We present a solution to improve the unwrapping performance of the C- and X-band data by considering the L-band unwrapped pattern. A new algorithm for the generation of a single digital elevation model (DEM) combining L-, C-, and X-band information is presented. This solution is based on the fusion of the unwrapped phase patterns by using a Kalman filter. The proposed fusion operation also accounts for the coherence characteristics of the three data sets. The selected test site is the Mt. Etna region in Italy which is very interesting from the volcanological and geological point of view. Numerical assessments of the achieved results are provided by evaluating the height accuracy with respect to a reference DEM.

We investigate multichannel imaging radar systems employing coherent combinations of polarimetry and interferometry (Pol-InSAR). Such systems are well suited for the extraction of bio- and geophysical parameters by evaluating the combined scattering from surfaces and volumes. This combination leads to several important differences between the design of Pol-InSAR sensors and conventional single polarisation SAR interferometers. We first highlight these differences and then investigate the Pol-InSAR performance of two proposed spaceborne SAR systems (ALOS/PalSAR and TerraSAR-L) operating in repeat-pass mode. For this, we introduce the novel concept of a phase tube which enables (1) a quantitative assessment of the Pol-InSAR performance, (2) a comparison between different sensor configurations, and (3) an optimization of the instrument settings for different Pol-InSAR applications. The phase tube may hence serve as an interface between system engineers and application-oriented scientists. The performance analysis reveals major limitations for even moderate levels of temporal decorrelation. Such deteriorations may be avoided in single-pass sensor configurations and we demonstrate the potential benefits from the use of future bi- and multistatic SAR interferometers.

Compact polarimetry is a dual-polarization hybrid imaging mode and provides partially backscatter characteristics of scatterers. The compact polarimetric (CP) synthetic aperture radar (SAR) measures the combinations of fully polarimetric (FP) scattering coefficients, which is dependent on the transmit-wave polarization state. The backscattered wave is fully described by a 2-D complex scattering vector, in which the dual-channel polarization ratio represents the vector nature for describing target polarimetric properties. However, due to the dependence of CP measurements on the transmit wave, the complex channel ratio is explained differently for the same scatterers under different observation modes, e.g., the channel ratio ρ = ± j under the left circular mode and ρ = ±1 under the linear π/4 mode for the canonical trihedral and dihedral scatterers. The explanation diversity is inconvenient for the use of CP data, resulting in nonunified target decomposition algorithms. In this study, first, we propose a new formalism method for the general CP SAR mode, such that all CP mode observables are described based on the same standard for target scattering characterization. This provides potential for developing unified CP decomposition algorithms. Then, based on this formalism, a polarization ratio-based scattering characterization method is proposed, which is mathematically equal to the FP ΔαB/αB method but without any scattering assumption. Theoretical analyses and discussions are provided. Experiments show that the proposed method is efficient for compact polarimetric scattering interpretation. [ABSTRACT FROM AUTHOR]

A significant amount of the data acquired by sun-synchronous space-borne low-frequency synthetic aperture radars (SARs) through the postsunset equatorial sector are distorted by the ionospheric scintillations due to the presence of plasma irregularities and their zonal and vertical drift. In the focused SAR images, the distortions due to the postsunset equatorial ionospheric scintillations appear in the form of amplitude and/or phase “stripe” patterns of high spatial frequency aligned to the projection of the geomagnetic field onto the SAR image plane. In this paper, a methodology to estimate the height and the drift velocity of the scintillations from the “stripe” patterns detected in the SAR images is proposed. The analysis is based on the fact that the zonal and vertical drift of the plasma irregularities are, at the equatorial zone, perpendicular to the geomagnetic field which is almost parallel aligned to the orbit. The methodology takes advantage of the time lapse and change of imaging geometry across azimuth subapertures. The obtained height estimates agree well with the reference measurements and independent estimates reported in the literature, while the drift velocities appear slightly overestimated. This can be attributed to a suboptimum geometry configuration but also to a decoupling of the ambient ionosphere and the plasma irregularities. [ABSTRACT FROM PUBLISHER]

A correction methodology for distortions induced by ionospheric scintillation on fully polarimetric synthetic aperture radar (SAR) data is proposed. The correction is based on deriving the phase distortion induced by the ionosphere from Faraday rotation estimates. The estimated phase distortion is then used for correction. In order to compensate the phase and time–Doppler history distortions, the correction has to be performed at the slant range of the ionospheric layer, i.e., on partially focused single-look complex data. Accordingly, the performance of the proposed correction methodology depends, among other factors, on knowledge of the altitude of the effective ionospheric layer (assuming the thin ionospheric layer model). Its estimation from the SAR data itself is therefore also addressed. The methodology was applied and validated on simulated P-band data for various ionospheric conditions and on real L-band data acquired by the Advanced Land Observation Satellite Phased Array L-band SAR (PALSAR). [ABSTRACT FROM PUBLISHER]