Search

To improve reactivity and achieve a higher material efficiency, catalysts are often used in the form of clusters with nanometer dimensions, down to single atoms. Since the corresponding properties are highly structure‐dependent, a suitable support is thus required to ensure cluster stability during operating conditions. Herein, an efficient method to stabilize cobalt nanoclusters on graphene grown on nickel substrates, exploiting the anchoring effect of nickel atoms incorporated in the carbon network is presented. The anchored nanoclusters are studied by in situ variable temperature scanning tunneling microscopy at different temperatures and upon gas exposure. Cluster stability upon annealing up to 200 °C and upon CO exposure at least up to 1 × 10−6 mbar CO partial pressure is demonstrated. Moreover, the dimensions of the cobalt nanoclusters remain surprisingly small (

Atomic-scale imaging using scanning probe microscopy is a pivotal method for investigating the morphology and physico-chemical properties of nanostructured surfaces. Time resolution represents a significant limitation of this technique, as typical image acquisition times are on the order of several seconds or even a few minutes, while dynamic processes—such as surface restructuring or particle sintering, to be observed upon external stimuli such as changes in gas atmosphere or electrochemical potential—often occur within timescales shorter than a second. In this article, we present a fully redesigned field programmable gate array (FPGA)-based instrument that can be integrated into most commercially available standard scanning probe microscopes. This instrument not only significantly accelerates the acquisition of atomic-scale images by orders of magnitude but also enables the tracking of moving features such as adatoms, vacancies, or clusters across the surface (“atom tracking”) due to the parallel execution of sophisticated control and acquisition algorithms and the fast exchange of data with an external processor. Each of these measurement modes requires a complex series of operations within the FPGA that are explained in detail.

Abstract We report the deposition of monolayers and multilayers of {Cr10(OMe)20(O2CCMe3)10} wheels, hereafter {Cr10}, onto Au(111) and Cu(111) single‐crystal substrates, and their characterization combining scanning tunneling microscopy, X‐ray photoelectron spectroscopy, X‐ray absorption spectroscopy, X‐ray natural linear dichroism, and X‐ray magnetic circular dichroism (XMCD). {Cr10} in bulk shows axial magnetic anisotropy and a cluster total spin S = 9 ground state, stemming from an interaction scheme of two semi‐crowns containing four Cr3+ ions interacting ferromagnetically, separated by two Cr3+ antiferromagnetically coupled. The one‐monolayer (1ML) samples of {Cr10} sublimated on Ag(111) and Cu(111) show slightly different applied magnetic field dependence of XMCD signal. The field‐dependence of the magnetization evolves from a lower curve for the 1ML {Cr10} samples to a curve resembling the bulk one as the number of layers is increased, as shown in a 14ML sample. Monte Carlo simulations allow rationalizing the magnetization curves of the 1ML samples in terms of a reduction of the cluster ground‐state total spin, S = 3 or S = 6, as a consequence of variations in the intra‐wheel coupling interactions induced by the on‐surface deposition. The sensitivity of the magnetic configuration of {Cr10} to minor distortions of the intramolecular conformation might be exploited to control magnetism by external stimuli for applications.

Atomic-scale imaging using scanning probe microscopy is a pivotal method for investigating the morphology and physico-chemical properties of nanostructured surfaces. Time resolution represents a significant limitation of this technique, as typical image acquisition times are on the order of several seconds or even a few minutes, while dynamic processes—such as surface restructuring or particle sintering, to be observed upon external stimuli such as changes in gas atmosphere or electrochemical potential—often occur within timescales shorter than a second. In this article, we present a fully redesigned field programmable gate array (FPGA)-based instrument that can be integrated into most commercially available standard scanning probe microscopes. This instrument not only significantly accelerates the acquisition of atomic-scale images by orders of magnitude but also enables the tracking of moving features such as adatoms, vacancies, or clusters across the surface ("atom tracking") due to the parallel execution of sophisticated control and acquisition algorithms and the fast exchange of data with an external processor. Each of these measurement modes requires a complex series of operations within the FPGA that are explained in detail. [ABSTRACT FROM AUTHOR]

Abstract Background The stratification system from the International Working Group on the Diabetic Foot (IWGDF) was used to classify the participants as to the ulcer risk. However, it is not yet known what the classification groups’ individual deficits are regarding sensitivity, function, and musculoskeletal properties and mechanics. This makes it difficult to design proper ulcer prevention strategies for patients. Thus, this study aimed to investigate the foot function, foot strength and health of people with diabetes mellitus (DM)—with or without DPN—while considering the different ulcer risk classifications determined by the IWGDF. Methods The subject pool comprised 72 people with DM, with and without DPN. The patients were divided into three groups: Group 0 (G0), which comprised diabetic patients without DPN; Group 1 (G1), which comprised patients with DPN; and Group 2 (G2), which comprised patients with DPN who had foot deformities. The health and foot function of the subjects’ feet were assessed using a foot health status questionnaire (FHSQ-BR) that investigated four domains: foot pain, foot function, footwear, and general foot health. The patients’ foot strength was evaluated using the maximum force under each subject’s hallux and toes on a pressure platform (emed q-100, Novel, Munich, Germany). Results Moderate differences were found between G0 and G1 and G2 for the foot pain, foot function, general foot health, and footwear. There was also a small but significant difference between G0 and G2 in regards to hallux strength. Conclusion Foot health, foot function and strength levels of people with DM and DPN classified by the ulcer risk are different and this must be taken into account when evaluating and developing treatment strategies for these patients.

Diversos autores têm dirigido sua atenção à formação continuada de licenciados, uma vez que a escola tem se mostrado um espaço de mudanças, exigindo um profissional cada vez mais adequado a realidade. Dessa forma, este artigo apresenta uma pesquisa qualitativa que buscou compreender qual a importância, que professores de química do Ensino Médio, conferem a atualização, e de que maneira realizam-na. Para isso, analisaram-se questionários respondidos por dois grupos de professores de química do Ensino Médio, um constituído por formados em cursos de bacharel com um ano de complementação pedagógica e o outro de professores formados em cursos específicos em licenciatura em Química. As análises indicam que há algumas diferenças entre as visões dos dois grupos, mas ainda sim, todos os professores consideram a atualização importante para aperfeiçoamento da prática profissional, sendo que esta ocorre principalmente por cursos, internet e revistas de divulgação científica. Porém, a falta de tempo, dinheiro e incentivo foram considerados os principais obstáculos nesta busca pela atualização.

Rydingia michauxii (Briq.) Scheen and V.A.Albert (Lamiaceae) is used in Iranian traditional medicine to treat malaria, diabetes, hyperlipidemia, rheumatism and cardiovascular diseases. NMR and LC-DAD-MSn analyses were used to establish extract composition and phenylethanoid, flavonoid glycosides, lignans, labdane diterpenes and iridoids were identified and quantified. The main constituents were isolated, and structures were elucidated based on NMR, polarimetric and MS measurements. A new natural compound, ent-labda-8(17),13-dien-18-glucopyranosyl ester-15,16-olide is described here. The effects of ent-labda-8(17),13-dien-18-oic acid-15,16-olide (1), ent-labda-8(17),13-dien-18-glucopyranosyl es-ter-15,16-olide (2), antirrhinoside (3), echinacoside (4), verbascoside (5), and apigenin 6,8-di-C-glucoside (6), on the low-density lipoprotein receptor (LDLR) and proprotein convertase subtilisin/kexin type 9 (PCSK9), were studied in the human hepatocarcinoma cell line Huh7. Among the six constituents, (3) showed the strongest induction of the LDLR (3.7 ± 2.2 fold vs. control) and PCSK9 (3.2 ± 1.5 fold vs. control) at a concentration of 50 µM. The in vitro observations indicated a potential lipid lowering activity of (3) with a statin-like mechanism of action.

Charge transfer at molecule-metal interfaces affects the overall physical and magnetic properties of organic-based devices, and ultimately their performance. Here, the authors report evidence of a pronounced charge transfer involving nickel tetraphenyl porphyrin molecules adsorbed on copper.

Wine fermentation processes are driven by complex microbial systems, which comprise eukaryotic and prokaryotic microorganisms that participate in several biochemical interactions with the must and wine chemicals and modulate the organoleptic properties of wine. Among these, yeasts play a fundamental role, since they carry out the alcoholic fermentation (AF), converting sugars to ethanol and CO2 together with a wide range of volatile organic compounds. The contribution of Saccharomyces cerevisiae, the reference organism associated with AF, has been extensively studied. However, in the last decade, selected non-Saccharomyces strains received considerable commercial and oenological interest due to their specific pro-technological aptitudes and the positive influence on sensory quality. This review aims to highlight the inter-specific variability within the heterogeneous class of non-Saccharomyces in terms of synthesis and release of volatile organic compounds during controlled AF in wine. In particular, we reported findings on the presence of model non-Saccharomyces organisms, including Torulaspora delbrueckii, Hanseniaspora spp,Lachancea thermotolerans, Metschnikowia pulcherrima, Pichia spp. and Candida zemplinina, in combination with S. cerevisiae. The evidence is discussed from both basic and applicative scientific perspective. In particular, the oenological significance in different kind of wines has been underlined.

Previous studies showed that hybrid grapes often have qualitatively and quantitatively higher polyphenolic contents than the common V. vinifera grape varieties. In general, these compounds are studied for grape chemotaxonomy and for nutraceutical purposes due to their relevant antioxidant activity. Non-anthocyanic flavonoid composition of five red hybrid grape varieties produced by crossing of V. vinifera, V. aestivalis, V. cinerea, V. berlandieri, V. labrusca, V. lincecumii, and V. rupestris were studied by liquid chromatography/high-resolution mass spectrometry. Thirty-one compounds were identified, including methylnaringenin, a tetrahydroxy-dimethoxyflavanone-hexoside, two flavonols (quercetin and a pentahydroxyflavone isomer), 20 glycoside flavonols (four quercetin, two myricetin, two kaempferol, three isorhamnetin, one laricitrin, two syringetin, one kaempferide and two dihydroflavonol derivatives; myricetin-glucoside-glucuronide; myricetin-diglucoside; syringetin-dihexoside), three flavan-3-ols (−)-epicatechin, (+)-catechin, (−)-epicatechin gallate) and four proantocyanidins (procyanidin B1, procyanidin B2, procyanidin B3 or B4/B5, procyanidin T2 or T3/T4/C1). Seibel 19881, Seyve Villard 12-347 and Seyve Villard 29-399 were particularly rich in polyphenols. These findings emphasize that these grapes are especially interesting for the production of antioxidant extracts for nutraceutical and pharmaceutical uses.

Volatile compounds are responsible for the wine “bouquet”, which is perceived by sniffing the headspace of a glass, and of the aroma component (palate-aroma) of the overall flavor, which is perceived on drinking. Grape aroma compounds are transferred to the wine and undergo minimal alteration during fermentation (e.g., monoterpenes and methoxypyrazines); others are precursors of aroma compounds which form in winemaking and during wine aging (e.g., glycosidically-bound volatile compounds and C13-norisoprenoids). Headspace solid phase microextraction (HS-SPME) is a fast and simple technique which was developed for analysis of volatile compounds. This review describes some SPME methods coupled with gas chromatography/mass spectrometry (GC/MS) used to study the grape and wine volatiles.