Search

In the marine environment, most solid surfaces are covered by microbial biofilms, mainly composed of bacteria and diatoms. The negative effects of biofilms on materials and equipment are numerous and pose a major problem for industry and human activities. Since marine micro-organisms are an important source of bioactive metabolites, it is possible that they synthesize natural ecofriendly molecules that inhibit the adhesion of organisms. In this work, the antibiofilm potential of marine bacteria was investigated using Flavobacterium sp. II2003 as a target. This strain is potentially a pioneer strain of bacteria that was previously selected from marine biofilms for its strong biofilm-forming ability. The culture supernatants of 86 marine heterotrophic bacteria were tested for their ability to inhibit Flavobacterium sp. II2003 biofilm formation and the Pseudomonas sp. IV2006 strain was identified as producing a strong antibiofilm activity. The Pseudomonas sp. IV2006 culture supernatant (SN IV2006 ) inhibited Flavobacterium sp. II2003 adhesion without killing the bacteria or inhibiting its growth. Moreover, SN IV2006 had no effect on the Flavobacterium sp. II2003 cell surface hydrophilic/hydrophobic and general Lewis acid-base characteristics, but modified the surface properties of glass, making it on the whole more hydrophilic and more alkaline and significantly reducing bacterial cell adhesion. The glass-coating molecules produced by Pseudomonas sp. IV2006 were found to probably be polysaccharides, whereas the antibiofilm molecules contained in SN IV2006 and acting during the 2 h adhesion step on glass and polystyrene surfaces would be proteinaceous. Finally, SN IV2006 exhibited a broad spectrum of antibiofilm activity on other marine bacteria such as Flavobacterium species that are pathogenic for fish, and human pathogens in both the medical environment, such as Staphylococcus aureus and Pseudomonas aeruginosa , and in the food industry, such as Yersinia enterocolitica . Thus, a wide range of applications could be envisaged for the SN IV2006 compounds, both in aquaculture and human health.

Pseudomonas aeruginosa is a pathogenic micro-organism responsible for many hospital-acquired infections. It is able to adhere to solid surfaces and develop an immobilized community or so-called biofilm. Many studies have been focusing on the use of specific materials to prevent the formation of these biofilms, but the reactivity of the bacteria in contact to surfaces remains unknown. The aim of this study was to evaluate the impact of the abiotic surface on the physiology of adherent bacteria. Three different materials, stainless steel (SS), glass (G), and polystyrene (PS) that were relevant to industrial or medical environments were characterized at the physicochemical level in terms of their hydrophobicity and roughness. We showed that SS was moderately hydrophilic and rough, potentially containing crevices, G was hydrophilic and smooth while PS was hydrophobic and smooth. We further showed that P. aeruginosa cells were more likely able to adhere to SS and G rather than PS surfaces under our experimental conditions. The physiological response of P. aeruginosa when adhering to each of these materials was then evaluated by global proteomic analysis. The abundance of 70 proteins was shown to differ between the materials suggesting that their abundance was modified as a function of the material to which bacteria adhered. Our data lead to enabling the identification of abundance patterns that appeared to be specific to a given surface. Taken together, our data showed that P. aeruginosa is capable of sensing and responding to a surface probably via specific programmes to adapt its physiological response accordingly.

Over the last decades, surface biocontamination has become a major concern in food industries and medical environments where its outcomes could vary from financial losses to public health issues. Understanding adhesion mechanisms of involved microorganisms is essential to develop new strategies of prevention and control. Adhesion of Pseudomonas aeruginosa, a nosocomial pathogenic bacterium, relies on several bacterial features, among which are bacterial appendages such as flagella and type IV pili. Here, we examine the role of P. aeruginosa PAO1 flagella and type IV pili in the adhesion to abiotic surfaces with various hydrophobicities. Adhesion kinetics showed, that after 60min, flagella increased the adhesion of the strain to surfaces with high hydrophobicity while no effect was observed on hydrophilic surfaces. Flagella of adherent bacteria exhibited specific and conserved pattern on the surfaces that suggested a higher affinity of flagella for hydrophobic surfaces. Based on these results and on previous studies in the literature, we proposed a model of flagella-mediated adhesion onto hydrophobic surfaces where these appendages induce the first contact and promote the adhesion of the bacterial body. These findings suggest that anti-bioadhesive surface design should take into consideration the presence of bacterial appendages., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Cell wall proteins are central to the virulence of Candida albicans. Hwp1, Hwp2 and Rbt1 form a family of hypha-associated cell surface proteins. Hwp1 and Hwp2 have been involved in adhesion and other virulence traits but Rbt1 is still poorly characterized. To assess the role of Rbt1 in the interaction of C. albicans with biotic and abiotic surfaces independently of its morphological state, heterologous expression and promoter swap strategies were applied. The N-terminal domain with features typical of the Flo11 superfamily was found to be essential for adhesiveness to polystyrene through an increase in cell surface hydrophobicity. A 42 amino acid-long domain localized in the central part of the protein was shown to enhance the aggregation function. We demonstrated that a VTTGVVVVT motif within the 42 amino acid domain displayed a high β-aggregation potential and was responsible for cell-to-cell interactions by promoting the aggregation of hyphae. Finally, we showed through constitutive expression that while Rbt1 was directly accessible to antibodies in hyphae, it was not so in yeast. Similar results were obtained for another cell wall protein, namely Iff8, and suggested that modification of the cell wall structure between yeast and hyphae can regulate the extracellular accessibility of cell wall proteins independently of gene regulation.

The standard test methods used to assess the efficiency of a disinfectant applied to surfaces are often based on counting the microbial survivors sampled in a liquid, but total cell removal from surfaces is seldom achieved. One might therefore wonder whether evaluations of microbial survivors in liquid-sampled cells are representative of the levels of survivors in whole populations. The present study was thus designed to determine the "damaged/undamaged" status induced by a peracetic acid disinfection for Bacillus atrophaeus spores deposited on glass coupons directly on this substrate and to compare it to the status of spores collected in liquid by a sampling procedure. The method utilized to assess the viability of both surface-associated and liquid-sampled spores included fluorescence labeling with a combination of Syto 61 and Chemchrome V6 dyes and quantifications by analyzing the images acquired by confocal laser scanning microscopy. The principal result of the study was that the viability of spores sampled in the liquid was found to be poorer than that of surface-associated spores. For example, after 2 min of peracetic acid disinfection, less than 17% ± 5% of viable cells were detected among liquid-sampled cells compared to 79% ± 5% or 47% ± 4%, respectively, when the viability was evaluated on the surface after or without the sampling procedure. Moreover, assessments of the survivors collected in the liquid phase, evaluated using the microscopic method and standard plate counts, were well correlated. Evaluations based on the determination of survivors among the liquid-sampled cells can thus overestimate the efficiency of surface disinfection procedures.

Diffusion of entities inside biofilm triggers most mechanisms involved in biofilm-specific phenotypes. Using genetically engineered hydrophilic and hydrophobic cells of Lactococcus lactis yielding similar biofilm architectures, we demonstrated by fluorescence correlation spectroscopy that bacterial surface properties affect diffusion of nanoparticles through the biofilm matrix.

Electrical discharges in humid air at atmospheric pressure (nonthermal quenched plasma) generate long-lived chemical species in water that are efficient for microbial decontamination. The major role of nitrites was evidenced together with a synergistic effect of nitrates and H(2)O(2) and matching acidification. Other possible active compounds are considered, e.g., peroxynitrous acid.

The adhesion forces holding micron-sized particles to solid surfaces can be studied through the detachment forces developed by the transit of an air-liquid interface in a capillary. Two key variables affect the direction and magnitude of the capillary detachment force: (i) the thickness of the liquid film between the bubble and the capillary walls, and (ii) the effective angle of the triple phase contact between the particles and the interface. Variations in film thickness were calculated using a two-phase flow model. Film thickness was used to determine the time-variation of the capillary force during transit of the bubble. The curve for particle detachment was predicted from the calculated force. This curve proved to be non-linear and gave in situ information on the effective contact angle developing at the particle-bubble interface during detachment. This approach allowed an accurate determination of the detachment force. This theoretical approach was validated using latex particles 2 microm in diameter.

This paper describes the effects of initial microbial concentration and planktonic/adherent/detached states on the efficiency of plasma-activated water. This disinfecting solution was obtained by treating distilled water with an atmospheric pressure plasma produced by gliding electric discharges in humid air. The inactivation kinetics of planktonic cells of Hafnia alvei (selected as a bacterial model) were found to be of the first order. They were influenced by the initial microbial concentration. Efficiency decreased when the initial viable population N(0) increased, and the inactivation rate k(max) was linearly modified as a function of Log(10) (N(0)). This relation was used to compare planktonic, adherent, and detached cells independently from the level of population. Bacteria adhering to stainless steel and high-density polyethylene were also sensitive to treatment, but at a lower rate than their free-living counterparts. Moreover, cells detached from these solid substrates exhibited an inactivation rate lower than that of planktonic cells but similar to adherent bacteria. This strongly suggests the induction of a physiological modification to bacteria during the adhesion step, rendering adherent--and further detached--bacteria less susceptible to the treatment, when compared to planktonic bacteria.

In the natural environment, most of the phages that target bacteria are thought to exist in biofilm ecosystems. The purpose of this study was to gain a clearer understanding of the reactivity of these viral particles when they come into contact with bacteria embedded in biofilms. Experimentally, we quantified lactococcal c2 phage diffusion and reaction through model biofilms using in situ fluorescence correlation spectroscopy with two-photon excitation. Correlation curves for fluorescently labeled c2 phage in nonreacting Stenotrophomonas maltophilia biofilms indicated that extracellular polymeric substances did not provide significant resistance to phage penetration and diffusion, even though penetration and diffusion were sometimes restricted because of the noncontractile tail of the viral particle. Fluctuations in the fluorescence intensity of the labeled phage were detected throughout the thickness of biofilms formed by c2-sensitive and c2-resistant strains of Lactococcus lactis but could never be correlated with time, revealing that the phage was immobile. This finding confirmed that recognition binding receptors for the viral particles were present on the resistant bacterial cell wall. Taken together, our results suggest that biofilms may act as "active" phage reservoirs that can entrap and amplify viral particles and protect them from harsh environments.

This study aimed to characterize the bacterium-destroying properties of a gliding arc plasma device during electric discharges and also under temporal postdischarge conditions (i.e., when the discharge was switched off). This phenomenon was reported for the first time in the literature in the case of the plasma destruction of microorganisms. When cells of a model bacterium, Hafnia alvei, were exposed to electric discharges, followed or not followed by temporal postdischarges, the survival curves exhibited a shoulder and then log-linear decay. These destruction kinetics were modeled using GinaFiT, a freeware tool to assess microbial survival curves, and adjustment parameters were determined. The efficiency of postdischarge treatments was clearly affected by the discharge time (t*); both the shoulder length and the inactivation rate k(max) were linearly modified as a function of t*. Nevertheless, all conditions tested (t* ranging from 2 to 5 min) made it possible to achieve an abatement of at least 7 decimal logarithm units. Postdischarge treatment was also efficient against bacteria not subjected to direct discharge, and the disinfecting properties of "plasma-activated water" were dependent on the treatment time for the solution. Water treated with plasma for 2 min achieved a 3.7-decimal-logarithm-unit reduction in 20 min after application to cells, and abatement greater than 7 decimal logarithm units resulted from the same contact time with water activated with plasma for 10 min. These disinfecting properties were maintained during storage of activated water for 30 min. After that, they declined as the storage time increased.

Background: The first step in biofilm formation is bacterial attachment to solid surfaces, which is dependent on the cell surface physico-chemical properties. Cell wall anchored proteins (CWAP) are among the known adhesins that confer the adhesive properties to pathogenic Gram-positive bacteria. To investigate the role of CWAP of non-pathogen Gram-positive bacteria in the initial steps of biofilm formation, we evaluated the physico-chemical properties and adhesion to solid surfaces of Lactococcus lactis. To be able to grow in milk this dairy bacterium expresses a cell wall anchored proteinase PrtP for breakdown of milk caseins., Results: The influence of the anchored cell wall proteinase PrtP on microbial surface physico-chemical properties, and consequently on adhesion, was evaluated using lactococci carrying different alleles of prtP. The presence of cell wall anchored proteinase on the surface of lactococcal cells resulted in an increased affinity to solvents with different physico-chemical properties (apolar and Lewis acid-base solvents). These properties were observed regardless of whether the PrtP variant was biologically active or not, and were not observed in strains without PrtP. Anchored PrtP displayed a significant increase in cell adhesion to solid glass and tetrafluoroethylene surfaces., Conclusion: Obtained results indicate that exposure of an anchored cell wall proteinase PrtP, and not its proteolytic activity, is responsible for greater cell hydrophobicity and adhesion. The increased bacterial affinity to polar and apolar solvents indicated that exposure of PrtP on lactococcal cell surface could enhance the capacity to exchange attractive van der Waals interactions, and consequently increase their adhesion to different types of solid surfaces and solvents.

Pseudomonads adapt to various ecological niches by forming biofilms, which first requires bacterial adhesion on surfaces. We studied the influence of growth temperature on surface physicochemical properties of Pseudomonas fluorescens MF37 and on its adhesive capacities onto inert surfaces. It presented a global hydrophilic character, measured by microbial adhesion to solvent (MATS), and showed a cell surface more hydrophilic at 8 and 28 degrees C than at 17 degrees C. Moreover, P. fluorescens MF37 was more adhesive at 17 degrees C. This critical temperature thus should be carefully taken into account in food safety. Adhesion onto inert surfaces is thus influenced by the growth temperature, which modifies the bacteria cell wall properties through changes in the outer membrane components. Therefore, we studied the effect of the loss of OprF, the major outer membrane protein, known to act as an adhesin (root, and endothelial cells). The OprF-deficient mutant was able to adhere to surfaces, but showed the same physicochemical and adhesion properties on abiotic surfaces whatever the growth temperature. OprF is thus not essential in this adhesion process. However, we suggest that OprF is involved in the bacterial environmental temperature sensing by P. fluorescens.

The ability of adsorbed biosurfactants (Pf and Lb) obtained from gram-negative bacterium (Pseudomonas fluorescens) or gram-positive bacterium (Lactobacillus helveticus) to inhibit adhesion of four listerial strains to stainless steel was investigated. These metallic surfaces were characterized using the following complementary analytical techniques: contact-angle measurements (CAM), atomic force microscopy (AFM), polarization modulation-infrared reflection-adsorption spectroscopy (PM-IRRAS) and X-ray photoelectron spectroscopy (XPS). Contact-angles with polar liquids (water and formamide) indicated that the stainless steel surface covered with adsorbed biosurfactant was more hydrophilic and electron-donating than bare stainless steel. The surface characterization by XPS and PM-IRRAS revealed that conditioning the stainless steel changes the substrate in two ways, by modifying the surface alloy composition and by leaving an thin adsorbed organic layer. AFM observations enabled to say that the layer covered entirely the surface and was probably thicker (with patches) in the case of Pf-conditioned surfaces compared to the Lb-conditioned ones, which seemed to be less homogeneous. Though the added layer was thin, significant chemical changes were observed that can account for drastic modifications in the surface adhesive properties. As a matter of fact, adhesion tests showed that both used biosurfactants were effective by decreasing strongly the level of contamination of stainless steel surfaces by the four strains of Listeria monocytogenes. The more important decrease concerned the CIP104794 and CIP103573 strains (>99.7%) on surface conditioned by L. helveticus biosurfactant. A less reduced phenomenon (75.2%) for the CIP103574 strain on stainless steel with absorbed biosurfactant from P. fluorescens was observed. Whatever the strain of L. monocytogenes and the biosurfactant used, this antiadhesive biologic coating reduced both total adhering flora and viable and cultivable adherent bacteria on stainless steel surfaces. This study confirms that biosurfactants constitute an effective strategy to prevent microbial colonization of metallic surfaces by pathogenic bacteria like the food-borne pathogen L. monocytogenes.

Fluorescence correlation spectroscopy (FCS) under two-photon excitation was used successfully to characterize the diffusion properties of model virus particles (bacteriophages) in bacterial biofilm of Stenotrophonas maltophilia. The results are compared to those obtained with fluorescent latex beads used as a reference. The FCS data clearly demonstrated the possibility for viral particles to penetrate inside the exopolymeric matrix of mucoid biofilms, and hence to benefit from its protective effect toward antimicrobials (antibiotics and biocides). Microbial biofilms should hence be considered as potential reservoirs of pathogenic viruses, and are probably responsible for numerous persistent viral infections.

Growth kinetics and physicochemical surface properties were compared for three Listeria strains with differing degrees of virulence: L. monocytogenes LO28; its isogenic, nonhemolytic mutant L. monocytogenes Bof415; and a nonvirulent species, L. innocua (strain Lin9). The influences of growth stage (mid-exponential phase, early stationary phase, and mid-stationary phase) and culture temperature (20 and 37 degrees C) were assessed by determining the electrical properties and the hydrophobic-hydrophilic and Lewis acid-base characteristics of the three strains. L. innocua, although taxonomically very similar to L. monocytogenes, exhibited physicochemical surface properties that differed significantly from those of L. monocytogenes LO28 and L. monocytogenes Bof415. Indeed, under our experimental conditions, L. innocua cells presented a more marked electronegative character (particularly when cultured at 20 degrees C), as well as greater variability in their Lewis acid-base characteristics as a function of temperature and growth stage. Furthermore, the growth kinetics of the three strains revealed the onset of a decay phase after 16 h of culture at 37 degrees C for the L monocytogenes Bof415 mutant. All of these results demonstrate that under our experimental conditions, the growth and/or physicochemical characteristics of the slightly pathogenic or nonpathogenic Listeria strains (Bof415 and Lin9) differed from those of the virulent strain (L. monocytogenes LO28). Consequently, the use of Listeria strains recognized as nonvirulent appeared to provide a model that was not fully suitable for simulating the bioadhesive behavior of the pathogenic strains involved in foodborne diseases.

The surface physicochemical properties of Listeria monocytogenes LO28 under different conditions (temperature and growth phase) were determined by use of microelectrophoresis and microbial adhesion to solvents. The effect of these parameters on adhesion and biofilm formation by L. monocytogenes LO28 on hydrophilic (stainless steel) and hydrophobic (polytetrafluoroethylene [PTFE]) surfaces was assessed. The bacterial cells were always negatively charged and possessed hydrophilic surface properties, which were negatively correlated with growth temperature. The colonization of the two surfaces, monitored by scanning electron microscopy, epifluorescence microscopy, and cell enumeration, showed that the strain had a great capacity to colonize both surfaces whatever the incubation temperature. However, biofilm formation was faster on the hydrophilic substratum. After 5 days at 37 or 20 degrees C, the biofilm structure was composed of aggregates with a three-dimensional shape, but significant detachment took place on PTFE at 37 degrees C. At 8 degrees C, only a bacterial monolayer was visible on stainless steel, while no growth was observed on PTFE. The growth phase of bacteria used to inoculate surfaces had a significant effect only in some cases during the first steps of biofilm formation. The surface physicochemical properties of the strain are correlated with adhesion and surface colonization.

We determined the variations in the surface physicochemical properties of Listeria monocytogenes Scott A cells that occurred under various environmental conditions. The surface charges, the hydrophobicities, and the electron donor and acceptor characteristics of L. monocytogenes Scott A cells were compared after the organism was grown in different growth media and at different temperatures; to do this, we used microelectrophoresis and the microbial adhesion to solvents method. Supplementing the growth media with glucose or lactic acid affected the electrical, hydrophobic, and electron donor and acceptor properties of the cells, whereas the growth temperature (37, 20, 15, or 8 degrees C) primarily affected the electrical and electron donor and acceptor properties. The nonlinear effects of the growth temperature on the physicochemical properties of the cells were similar for cells cultivated in two different growth media, but bacteria cultivated in Trypticase soy broth supplemented with 6 g of yeast extract per liter (TSYE) were slightly more hydrophobic than cells cultivated in brain heart infusion medium (P < 0.05). Adhesion experiments conducted with L. monocytogenes Scott A cells cultivated in TSYE at 37, 20, 15, and 8 degrees C and then suspended in a sodium chloride solution (1.5 x 10(-1) or 1.5 x 10(-3) M NaCl) confirmed that the cell surface charge and the electron donor and acceptor properties of the cells had an influence on their attachment to stainless steel.

The aim of this study was to examine the physicochemical surface properties and the ability to adhere to stainless steel of three strains of Listeria monocytogenes after different cultivation procedures. To this end, bacteria were cultivated at 37 degrees C after storage at two frequently used temperatures (4 degrees C or -80 degrees C) and were then transferred into the liquid medium (trypticase soy broth supplemented with 6 g liter(-1) of yeast extract, pH 7.3) between one and four times. In addition, the influence of supplementing the growth medium with lactic acid was explored, this organic acid being representative of both the dairy and cured meat industries. The hydrophobic/hydrophilic and electron-acceptor/electron-donor characteristics of the strains were evaluated by the microbial adhesion to solvents method. Using this technique, we recorded an increase in the hydrophobic properties of one strain stored at 4 degrees C, with an increasing number of transfers in the media (P < 0.05). Another plant-isolated strain appeared more hydrophobic and stuck better to stainless steel when cells were stored at 4 degrees C rather than at -80 degrees C. Preculturing L. monocytogenes in a lactic acid-supplemented medium increased the affinity of microbial cells to solvents and the bacterial attachment to stainless steel (P < 0.05).

Hydrophilic and electrostatic cell surface properties of eight Lactobacillus strains were characterized by using the microbial adhesion to solvents method and microelectrophoresis, respectively. All strains appeared relatively hydrophilic. The strong microbial adhesion to chloroform, an acidic solvent, in comparison with microbial adhesion to hexadecane, an apolar n-alkane, demonstrated the particularity of lactobacilli to have an important electron donor and basic character and consequently their potential ability to generate Lewis acid-base interactions with a support. Regardless of their electrophoretic mobility (EM), strains were in general slightly negatively charged at alkaline pH. A pH-dependent behavior concerning cell surface charges was observed. The EM decreased progressively with more acidic pHs for the L. casei subsp. casei and L. paracasei subsp. paracasei strains until the isoelectric point (IEP), i.e., the pH value for which the EM is zero. On the other hand, the EM for the L. rhamnosus strains was stable from pH 8 to pH 3 to 4, at which point there was a shift near the IEP. Both L. casei subsp. casei and L. paracasei subsp. paracasei strains were characterized by an IEP of around 4, whereas L. rhamnosus strains possessed a markedly lower IEP of 2. The present study showed that the cell surface physicochemical properties of lactobacilli seem to be, at least in part and under certain experimental conditions, particular to the bacterial species. Such differences detected between species are likely to be accompanied by some particular changes in cell wall chemical composition.

The attachment of Salmonella choleraesuis subsp. choleraesuis ATCC 15790 to beef muscle and adipose tissues was investigated. S. choleraesuis was found to adhere in higher numbers to muscle than to fat. The charge and the hydrophobicity of the surface of S. choleraesuis were evaluated by measurement of electrophoretic mobility, the contact angle with water, adhesion to hexadecane, and hydrophobic interaction chromatography. The overall negative charge of S. choleraesuis was masked by the high electrolyte concentration in the attachment medium (0.15 M phosphate-buffered saline). This bacterium was shown to possess a hydrophilic surface. Electrostatic interactions do not affect the attachment of S. choleraesuis to both lean and fat tissue, and there was no evidence for a role of hydrophobic interactions. However, the attachment of S. choleraesuis was reduced by 90% after mechanical removal of the flagella or after treatment of the bacteria with specific antiflagella serum. This reduction was attributed to a loss of bacterial mobility leading to a reduction in the number of cells reaching the tissue during the period of contact. Treatment of the tissue with a concentrated suspension of flagella or treatment of the bacteria with antisomatic serum (OMD) did not reduce the attachment of S. choleraesuis to tissues, indicating an absence of specific attachment sites for flagella or antigen O on the beef tissue surface.

The conidiospores of the white rot basidiomycete Phanerochaete chrysosporium tend to aggregate during swelling and germination in agitated liquid medium; as time passes, the initial aggregates tend to associate together and to capture conidiospores that remain isolated. The surface chemical compositions of the conidiospores and of developed hyphae were analyzed by X-ray photoelectron spectroscopy. The data were interpreted by modelling the surface in terms of proteins, polysaccharides and hydrocarbonlike compounds. The surface molecular composition of the dormant conidiospores was estimated to be about 45% proteins, 20% carbohydrates, and 35% hydrocarbonlike compounds. There was an increase in the polysaccharide content during germination. Later, when the hyphae were developed, the polysaccharide content became still higher, and the protein content dropped. The initial step of aggregation is attributed to polysaccharide bridging; its occurrence cannot be explained by a change of the overall hydrophobicity or electrical properties of the conidiospores.