Search

A major societal challenge is the development of the necessary tools for early diagnosis of diseases such as cancer and sepsis. Consequently, there is a concerted push to develop low-cost and non-invasive methods of analysis with high sensitivity and selectivity. A notable trend is the development of highly sensitive methods that are not only amenable for point-of-care (POC) testing, but also for wearable devices allowing continuous monitoring of biomarkers. In this context, a non-invasive test for the detection of a promising biomarker, the protein Interleukin-6 (IL-6), could represent a significant advance in the clinical management of cancer, in monitoring the chemotherapy response, or for prompt diagnosis of sepsis. This work reports a capacitive electrochemical impedance spectroscopy sensing platform tailored towards POC detection and treatment monitoring in human serum. The specific recognition of IL-6 was achieved employing gold surfaces modified with an anti-IL6 nanobody (anti-IL-6 VHH) or a specific IL-6 aptamer. In the first system, the anti-IL-6 VHH was covalently attached to the gold surface using a binary self-assembled-monolayer (SAM) of 6-mercapto-1-hexanol (MCH) and 11-mercaptoundecanoic acid. In the second system, the aptamer was chemisorbed onto the surface in a mixed SAM layer with MCH. The analytical performance for each label-free sensor was evaluated in buffer and 10% human serum samples and then compared. The results of this work were generated using a low-cost, thin film eight-channel gold sensor array produced on a flexible substrate providing useful information on the future design of POC and wearable impedance biomarker detection platforms., (© 2023. The Author(s).)

The role of the extracellular matrix (ECM) remodeling in tumorigenesis and metastasis is becoming increasingly clear. Cancer development requires that tumor cells recruit a tumor microenvironment permissive for further tumor growth. This is a dynamic process that takes place by a cross-talk between tumor cells and ECM. As a consequence, molecules derived from the ECM changes associated to cancer are released into the bloodstream, representing potential biomarkers of tumor development. This article highlights the importance of developing and improving bioanalytical methods for the detection of ECM remodeling-derived components, as a step forward to translate the basic knowledge about cancer progression into the clinical practice., (© 2021. Springer-Verlag GmbH Germany, part of Springer Nature.)

The prostate specific antigen (PSA) test is the gold standard for the screening of prostate cancer (PCa), despite its limited clinical specificity. Long noncoding RNAs are released from the tumor tissue to the urine and show great potential for improving specificity in PCa diagnosis. This work reports on a sandwich-type hybridization assay to detect both the urinary biomarker prostate cancer antigen 3 (PCA3) and an endogenous control, the PSA mRNA. Multiple fluorescein-tagged hybridization assistant probes are used to promote the selective capture of this long noncoding RNA, and sensitivity by incorporating multiple redox enzymes per target molecule, after addition of antifluorescein Fab fragment-peroxidase conjugate. This strategy alleviates the problems associated with the low natural abundance of this marker, its large size, and complex secondary structure. The individual genosensors exhibit good sensitivity (2.48 ± 0.01 μA nM -1 and 6.4 ± 0.3 μA nM -1 for PCA3 and PSA, respectively), with wide linear ranges (from 25 pM to 10 nM for PCA3 and 1 nM for PSA), and detection limits in the low picomolar range (4.4 pM and 1.5 pM for PCA3 and PSA, respectively). This analytical performance is retained in the dual configuration without significant cross-talk, despite using the same enzyme label. The usefulness of this dual platform was demonstrated by analyzing RNA extracts from the prostate cancer cell line LNCaP and from urine samples of prostate cancer patients., (Copyright © 2021 The Author(s). Published by Elsevier B.V. All rights reserved.)

Prostate specific antigen (PSA) is the common biomarker for prostate cancer (PCa). However, its lack of specificity to differentiate PCa from benign prostate disorders stimulates the search for alternative cancer biomarkers to improve the clinical management of the patients. Different studies have described changes in the core-fucosylation level of PSA between PCa patients and healthy controls. To exploit these findings, we have adapted an impedimetric aptamer-based sensor to the dual recognition of PSA. Two different aptamers, PSAG-1 and anti-PSA, are immobilized onto two adjacent nanostructured gold electrodes. The direct binding from diluted serum samples of specific glycosylated-PSA to the first sensor and total PSA to the second one leads to changes in the charge transfer resistance, which correlate to the amount of glycosylated and total PSA in the sample. The sensors are able to measure PSA in serum with a dynamic range between 0.26 and 62.5 ng/mL (PSAG-1) and from 0.64 to 62.5 ng/mL (anti-PSA), with a reproducibility of 5.4 %. The final output of the proposed platform is the ratio between PSAG-1 reactive PSA and total PSA, defined as the glycan score. The glycan score was tested in serum samples from patients with different pathologies, showing excellent correlation between the measured score and the known diagnosis of the patients. Hence this dual aptamer-based impedimetric biosensor could be used as a minimally invasive method for the diagnosis of prostate cancer., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Enzyme-linked immunosorbent assays are currently the most popular methods to quantify gluten in foods. Unfortunately, the antibodies used as specific receptors in such methods are not compatible with the usual solvents for the extraction of gluten proteins. In consequence, commercial tests require a high dilution of the sample after the extraction, increasing the limit of quantification and decreasing convenience. In this work, we have rationally truncated an aptamer capable of recognizing gliadin in a deep eutectic solvent (DES). The truncated aptamer is a 19-nucleotides-long DNA that minimizes self-hybridization, allowing the development of an electrochemical sandwich-based sensor for the quantification of gluten in the DES ethaline. The sensor incorporates two identical biotin-labeled truncated aptamers, one of which is immobilized on a carbon screen-printed electrode and the other reports the binding of gliadin after incubation in streptavidin-peroxidase. This sensor can detect gliadin in DES, with a dynamic range between 1 and 100 μg/L and an intra-assay coefficient of variation of 11%. This analytical performance allows the quantification of 20 μg of gluten/kg of food when 1 g of food is extracted with 10 mL of ethaline. We demonstrate the ability of this method to achieve the measurement of gluten in food samples, after the extraction with pure ethaline. The assay is useful for the analysis of residual gluten levels in foods, thus facilitating the evaluation of any potential health risk associated with the consumption of such food by people with celiac disease or other gluten-related disorders., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A personal glucose meter (PGM)-based method for quantitative detection of a urinary nucleic acid biomarker in prostate cancer screening, the so-called PCA3, is reported herein. A sandwich-type genoassay is conducted on magnetic beads to collect the target from the sample by specific hybridization, making the assay appropriate for PCA3 detection in biological fluids. The success of the method hinges on the use of alkaline phosphatase (ALP) to link the amount of nucleic acid biomarker to the generation of glucose. In particular, specifically attached ALP molecules hydrolyze D-glucose-1-phosphate into D-glucose, thus enabling the amplification of the recorded signal on the personal glucose meter. The developed genoassay exhibits good sensitivity (3.3 ± 0.2 mg glucose dL -1 pM -1 ) for PCA3, with a dynamic range of 5 to 100 pM and a quantification limit of 5 pM. Likewise, it facilitates point-of-care testing of nucleic acid biomarkers by using off-the-shelf PGM instead of complex instrumentation involved in traditional laboratory-based tests.

Detecting specific protein glycoforms is attracting particular attention due to its potential to improve the performance of current cancer biomarkers. Although natural receptors such as lectins and antibodies have served as powerful tools for the detection of protein-bound glycans, the development of effective receptors able to integrate in the recognition both the glycan and peptide moieties is still challenging. Here we report a method for selecting aptamers toward the glycosylation site of a protein. It allows identification of an aptamer that binds with nM affinity to prostate-specific antigen, discriminating it from proteins with a similar glycosylation pattern. We also computationally predict the structure of the selected aptamer and characterize its complex with the glycoprotein by docking and molecular dynamics calculations, further supporting the binary recognition event. This study opens a new route for the identification of aptamers for the binary recognition of glycoproteins, useful for diagnostic and therapeutic applications., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Affinity characterization is essential to develop reliable aptamers for tumor biomarker detection. For alpha-fetoprotein (AFP), a biomarker of hepatocellular carcinoma (HCC), two DNA aptamers were described with very different affinity. In this work, we estimate the dissociation constant of both of them by means of a direct assay on magnetic beads modified with AFP and electrochemical detection on carbon screen-printed electrodes (SPCE). Unlike previous works, both aptamers showed similar dissociation constant (K d ) values, in the subµM range. In order to improve the performance of these aptamers, we proposed the isothermal amplification of the aptamers by both terminal deoxynucleotidyl transferase (TdT) and rolling circle amplification (RCA). Both DNA amplifications improved the sensitivity and also the apparent binding constants from 713 nM to 189 nM for the short aptamer and from 526 nM to 32 nM for the long aptamer. This improvement depends on the true affinity of the binding pair, which ultimately limits the analytical usefulness.

Latest technological advancement has tremendously expanded the knowledge on the composition of body fluids and the cancer-associated changes, which has fueled the replacement of invasive biopsies with liquid biopsies by using appropriate specific receptors. DNA emerges as a versatile analytical reagent in electrochemical devices for hybridization-based or aptamer-based recognition of all kind of biomarkers. In this mini review, we briefly introduce the current affordable targets (tumor-derived nucleic acids, circulating tumor cells and exosomes) in body fluids, and then we provide an overview of selected electrochemical methods already applied in clinical samples by dividing them into three large categories according to sample type: red (blood), yellow (urine), and white (saliva and sweat) diagnostics. This review focuses on the hurdles of the complex matrices rather than a comprehensive and detailed revision of the format schemes of DNA-based electrochemical sensing. This diverse perspective compiles some challenges that are often forgotten and critically underlines real sample analysis or clinical validation assays. Finally, the needs and trends to reach the market are briefly outlined., (Copyright © 2020 Miranda-Castro, Palchetti and de-los-Santos-Álvarez.)

Despite having been underappreciated in favor of their protein-coding counterparts for a long time, long noncoding RNAs (lncRNAs) have emerged as functional molecules, which defy the central dogma of molecular biology, with clear implications in cancer. Altered expression levels of some of these large transcripts in human body fluids have been related to different cancer conditions that turns them into potential noninvasive cancer biomarkers. In this review, a brief discussion about the importance and current challenges in the determination of lncRNAs associated to cancer is provided. Different electrochemical nucleic acid-based strategies for lncRNAs detection are critically described. Future perspectives and remaining challenges for the practical implementation of these methodologies in clinical medicine are also discussed.

The development of chemical sensors capable of detecting the specific glycosylation patterns of proteins offers a powerful mean for the early detection of cancer. Unfortunately, this strategy is scarcely explored because receptors recognizing the glycans linked to proteins are challenging to discover. In this work, we describe a simple method for directing the selection of aptamers toward the glycan structure of the glycoproteins, with prostate-specific antigen (PSA) as a model target. Using this strategy, we identified one aptamer (PSA-1) that binds the glycan moiety of PSA with reasonable affinity (a dissociation constant of 177 ± 65 nM). Interestingly, an electrochemical sensor with a sandwich format employing the identified aptamer as a signaling receptor, provides a tool of discriminating human PSA from the unglycosylated protein, with a limit of detection of 0.66 ng/mL. The sensor responds to different levels of PSA in serum, correlating well with chemiluminescence ELISA used in hospitals even with higher potential to discriminate clinically meaningful prostate cancer. Although validation on a larger cohort is needed, this is the first demonstration of an aptamer-based sensor to detect PSA by focusing in its glycan moiety., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The integration of nanomaterials in the field of (bio)sensors has allowed developing strategies with improved analytical performance. In this work, ultrasmall core-shell Fe 3 O 4 @Au magnetic nanoparticles (MNPs) were used as the platform for the immobilization of event-specific Roundup Ready (RR) soybean and taxon-specific DNA sequences. Firstly, monodisperse Fe 3 O 4 MNPs were synthesized by thermal decomposition and subsequently coated with a gold shell through reduction of Au(III) precursor on the surface of the MNPs in the presence of an organic capping agent. This nanosupport exhibited high colloidal stability, average particle size of 10.2 ± 1.3 nm, and spherical shape. The covalent immobilization of ssDNA probe onto the Au shell of the Fe 3 O 4 @Au MNPs was achieved through a self-assembled monolayer (SAM) created from mixtures of alkane thiols (6-mercapto-1-hexanol and mercaptohexanoic acid). The influence of the thiols ratio on the electrochemical performance of the resulting electrochemical genoassays was studied, and remarkably, the best analytical performance was achieved for a pure mercaptohexanoic acid SAM. Two quantification assays were designed; one targeting an RR sequence and a second targeting a reference soybean gene, both with a sandwich format for hybridization, signaling probes labelled with fluorescein isothiocyanate (FITC), enzymatic amplification and chronoamperometric detection at screen-printed carbon electrodes (SPCE). The magnetogenoassays exhibited linear ranges from 0.1 to 10.0 nM and from 0.1 to 5.0 nM with similar detection limits of 0.02 nM and 0.05 nM for the event-specific (RR) and the taxon-specific (lectin) targets, respectively. The usefulness of the approach was demonstrated by its application to detect genetically modified organisms (GMOs) in feed and food., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Advances in proteomics have fueled the search for novel cancer biomarkers with higher selectivity. Differential expression of low abundant proteins has been the usual way of finding those biomarkers. The existence of a selective receptor for each biomarker is compulsory for their use in diagnostic/prognostic assays. Antibodies are the receptors of choice in most cases although aptamers are becoming familiar because of their facile and reproducible synthesis, chemical stability as well as comparable affinity and selectivity. In recent years, it has been reported that the pattern of post-translational modifications, altered under neoplastic disease, is a better predictive biomarker than the total protein level. Among others, abnormal glycosylation is attracting great attention. Lectins and antibodies are being used for identification and detection of the carbohydrate moiety with low level of discrimination among various glycoproteins. Such level of selectivity is critical to bring next-generation biomarkers to the clinic. Aptamers that can be rationally tailored for a certain molecule domain can become the golden receptor to specifically detect aberrant glycosylation at each protein or even at each glycosylation site, providing new diagnostic tools for early detection of cancer. Graphical abstract Aptamers may specifically differentiate normal from aberrant glycoproteins.

Highly sensitive testing of nucleic acids is essential to improve the detection of pathogens, which pose a major threat for public health worldwide. Currently available molecular assays, mainly based on PCR, have a limited utility in point-of-need control or resource-limited settings. Consequently, there is a strong interest in developing cost-effective, robust, and portable platforms for early detection of these harmful microorganisms. Since its description in 2004, isothermal helicase-dependent amplification (HDA) has been successfully applied in the development of novel molecular-based technologies for rapid, sensitive, and selective detection of viruses and bacteria. In this review, we highlight relevant analytical systems using this simple nucleic acid amplification methodology that takes place at a constant temperature and that is readily compatible with microfluidic technologies. Different strategies for monitoring HDA amplification products are described. In addition, we present technological advances for integrating sample preparation, HDA amplification, and detection. Future perspectives and challenges toward point-of-need use not only for clinical diagnosis but also in food safety testing and environmental monitoring are also discussed. Graphical Abstract Expanding the analytical toolbox for the detection of DNA sequences specific of pathogens with isothermal helicase dependent amplification (HDA).

Genosensing technology has mostly based on mixed self-assembled monolayers (SAMs) of thiol-modified oligonucleotides and alkanethiols on gold surfaces. However, the typical backfilling approach, which incorporates the alkanethiol in a second step, gives rise to a heterogeneous distribution of oligonucleotide probes on the surface, negatively affecting to both hybridization efficiency and surface stability. Despite aromatic thiols present a remarkably different behavior from alkanethiols, with higher rigidity and stronger intermolecular interactions, they have been scarcely explored for the fabrication of DNA sensing platforms. We have investigated different approaches involving SAMs of aromatic thiols, namely p-mercaptobenzoic acid (p-MBA) and p-aminothiophenol (p-ATP), to yield DNA sensing layers for sequence-specific detection of target oligonucleotides. The studied monolayers were evaluated by DNA surface coverage and further information was obtained by determining their functionality in a sandwich hybridization assay with enzymatic amplification of the electrochemical read-out. The insertion of thiol-oligonucleotides into p-ATP monolayers previously oxidized, and the covalent binding of amino-oligonucleotides to pure p-MBA monolayers give rise to increased storage stability and better analytical performance. The quantification of RNA from Legionella pneumophila cellular lysates was successfully performed, illustrating the usefulness of these sensing architectures for detecting pathogenic bacteria., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The design of screening methods for the detection of genetically modified organisms (GMOs) in food would improve the efficiency in their control. We report here a PCR amplification method combined with a sequence-specific electrochemical genosensor for the quantification of a DNA sequence characteristic of the 35S promoter derived from the cauliflower mosaic virus (CaMV). Specifically, we employ a genosensor constructed by chemisorption of a thiolated capture probe and p -aminothiophenol gold surfaces to entrap on the sensing layer the unpurified PCR amplicons, together with a signaling probe labeled with fluorescein. The proposed test allows for the determination of a transgene copy number in both hemizygous (maize MON810 trait) and homozygous (soybean GTS40-3-2) transformed plants, and exhibits a limit of quantification of at least 0.25% for both kinds of GMO lines.

Methods for the early and sensitive detection of pathogenic bacteria suited to low-resource settings could impact diagnosis and management of diseases. Helicase-dependent isothermal amplification (HDA) is an ideal tool for this purpose, especially when combined with a sequence-specific detection method able to improve the selectivity of the assay. The implementation of this approach requires that its analytical performance is shown to be comparable with the gold standard method, polymerase chain reaction (PCR). In this study, we optimize and compare the asymmetric amplification of an 84-base-long DNA sequence specific for Mycobacterium tuberculosis by PCR and HDA, using an electrochemical genomagnetic assay for hybridization-based detection of the obtained single-stranded amplicons. The results indicate the generalizability of the magnetic platform with electrochemical detection for quantifying amplification products without previous purification. Moreover, we demonstrate that under optimal conditions the same gene can be amplified by either PCR or HDA, allowing the detection of as low as 30 copies of the target gene sequence with acceptable reproducibility. Both assays have been applied to the detection of M. tuberculosis in sputum, urine, and pleural fluid samples with comparable results. Simplicity and isothermal nature of HDA offer great potential for the development of point-of-care devices. Graphical Abstract Comparative evaluation of isothermal helicase-dependent amplification and PCR for electrochemical detection of Mycobacterium tuberculosis.

Celiac disease is a lifelong autoimmune disorder triggered by foods containing gluten, the storage protein in wheat, rye, and barley. The rapidly escalating number of patients diagnosed with this disease poses a great challenge to both food industry and authorities to guarantee food safety for all. Therefore, intensive efforts are being made to establish minimal disease-eliciting doses of gluten and consequently to improve gluten-free labeling. These efforts depend to a high degree on the availability of methods capable of detecting the protein in food samples at levels as low as possible. Current analytical approaches rely on the use of antibodies as selective recognition elements. With limited sensitivity, these methods exhibit some deficiencies that compromise the accuracy of the obtained results. Aptamers provide an ideal alternative for designing biosensors for fast and selective measurement of gluten in foods. This article highlights the challenges in gluten detection, the current status of the use of aptamers for solving this problem, and what remains to be done to move these systems into commercial applications.

Human infections with Legionella pneumophila represent a public health problem. Current culture assays for surveillance and control of L. pneumophila in water are time-consuming and limited by the sensitivity, especially when samples also contain microorganisms that inhibit Legionella growth. In this work, an electrochemical method, different from real-time polymerase chain reaction (PCR) approaches, for semiquantitative evaluation of L. pneumophila is presented. A PCR assay targeting the 16S-rRNA gene of L. pneumophila giving rise to a 95-mer amplicon was established. Amplicons were hybridized to a biotin-labeled reporter sequence and then to a thiolated stem-loop structure immobilized onto gold electrodes as a reporter molecule with 1-naphthyl phosphate as a substrate. 1-Naphthol enzymatically generated was determined by differential pulse voltammetry (DPV). For a constant number of amplification cycles, results show that the voltammetric signal is related to the number of copies in the sample thus achieving a useful semiquantitative estimation of L. pneumophila. After 40 cycles of PCR amplification this methodology has a limit of detection of 10 genomes, allowing the reliable detection of 10(2) genomes of L. pneumophila as well as distinguishing 10(3) and 10(4) genomes of the pathogen, values related to corrective actions in water systems in buildings, in accordance with the legislation currently in force.