Search

Objective To assess which radiological alignment parameters are associated with a satisfactory long-term clinical outcome after performing lumbar spinal fusion for treating degenerative spondylolisthesis. Methods This single-center prospective study assessed the relation between radiological alignment parameters measured on standing lateral lumbar spine radiographs and the patient-reported outcome using four different questionnaires (COMI, EQ-5D, ODI and VAS) as primary outcome measures (level of evidence: II). The following spinopelvic alignment parameters were used: gliding angle, sacral inclination, anterior displacement, sagittal rotation, lumbar lordosis, sacral slope, pelvic tilt and pelvic incidence. Furthermore, the length of stay and perioperative complications were documented. Only cases from 2013 to 2015 of low-grade degenerative lumbar spondylolisthesis (Meyerding grades I and II) were considered. The patients underwent open posterior lumbar fusion surgery by pedicle screw instrumentation and cage insertion. The operative technique was either a posterior lumbar interbody fusion (PLIF) or a transforaminal lumbar interbody fusion (TLIF) performed by three different senior orthopedic surgeons. Exclusion criteria were spine fractures, minimally invasive techniques, underlying malignant diseases or acute infections, previous or multisegmental spine surgery as well as preoperative neurologic impairment. Of 89 initially contacted patients, 17 patients were included for data analysis (11 males, six females). Results The data of 17 patients after mono- or bisegmental lumbar fusion surgery to treat low-grade lumbar spondylolisthesis and with a follow-up time of least 72 months were analyzed. The mean age was 66.7 +/- 11.3 years. In terms of complications two dural tears and one intraoperative bleeding occurred. The average body mass index (BMI) was 27.6 +/- 4.4 kg/m(2) and the average inpatient length of stay was 12.9 +/- 3.8 days (range: 8-21). The long-term clin

Bisphenol A (BPA), which is contained in numerous plastic products, is known to act as an endocrine-disruptive, toxic, and carcinogenic chemical. This experimental series sought to determine the influence of BPA exposure on the femoral bone architecture and biomechanical properties of male and female Wistar rats. BPA was applied subcutaneously by using osmotic pumps. After 12 weeks, the bones were analyzed by micro-computed tomography (micro-CT) and a three-point bending test. Comparing the female low- and high-dose groups, a significantly greater marrow area (p = 0.047) was identified in the group exposed to a higher BPA concentration. In addition, the trabecular number tended to be higher in the female high-dose group when compared to the low-dose group (p > 0.05). The area moment of inertia also tended to be higher in the male high-dose group when compared to the male low-dose group (p > 0.05). Considering our results, BPA-related effects on the bone morphology in female Wistar rats are osteoanabolic after high-dose exposure, while, in male rats, a tendency toward negative effects on the bone morphology in terms of a reduced cross-sectional cortical area and total area could be demonstrated.

Background Subaxial cervical spine injury especially in the elderly can be associated to severe complications and disability. Until today there is no consensus concerning the best operative treatment. A potential superiority of anterior or posterior fixation is the subject of controversial discussions. Objectives The aim of this study was to compare the outcome of anterior and posterior fixation after subaxial cervical spine trauma in the elderly focussing on the postoperative mortality. Material and Methods A retrospective cohort analysis was performed to analyse the data of 43 patients. Especially mortality data were collected. Results A total of 43 patients was identified. Anterior fixation was performed in 21 patients, posterior fixation was performed in 22 patients. There were no significant differences between these groups. Although statistical significance was not reached, a slightly higher mortality was found among patients undergoing anterior fixation (52,4 vs. 31,8%). Furthermore the male sex, a higher age, translation injuries, long duration of operation and hospitalisation as well as postoperative complications were slightly associated to a higher mortality. Conclusions Subaxial cervical spine trauma is associated to a high mortality in the elderly. Although neither anterior nor posterior fixation could show a significant superiority, every surgical decision making should be performed individually for each patient balancing the advantages and disadvantages of each method. Zusammenfassung Hintergrund Subaxiale Halswirbelsaulenverletzungen konnen besonders beim alten Patienten schwerwiegende Folgen haben. Weiterhin besteht jedoch Uneinigkeit hinsichtlich des optimalen Operationsverfahrens. Eine potenzielle uberlegenheit von ventralen oder dorsalen Strategien wird kontrovers diskutiert. Fragestellung Ziel dieser Studie war die Analyse des Outcomes nach ventralen und dorsalen Operationsverfahren im Rahmen subaxialer Halswirbelsaulenverletzungen beim alten Me

Purpose The atlantoaxial joint represents the most mobile joint complex within the spine, secured by ligaments and capsules. Integrity of the atlantoaxial joint is crucial with respect to the mobility of the head and the upper spine. Atlantoaxial rotatory dislocation is the most common type of injury within this joint in children and is characterized by a typical position of the head (cock robin position). Nevertheless, this type of injury is frequently overlooked. The purpose of the current study was threefold. First, the characteristics of the patients with atlantoaxial dislocation were identified. Next, we checked if the time to treatment did influence the type of treatment. Finally, we checked if the age of the child at the time of treatment influenced the type of treatment. Methods Forty-four children, who were treated consecutively due to atlantoaxial dislocation at a single spine center between September 1993 and October 2018, are analyzed retrospectively regarding age, sex, symptoms, etiology, time to diagnosis, time to treatment, and outcome. Results Forty-four children (30 girls, mean age 8.9 years) were included in the study. The cock robin head position was found in all of them, but neurological deficits were not found in any of them. In 21 patients, dislocation was caused by previous infection (Grisel's syndrome), whereas in 19 patients, dislocation was due to minor trauma. In 4 cases, etiology remained unknown. Mean time to sufficient treatment was 178 days. Eighteen patients received closed reduction and immobilization after 57 days at mean. Open reduction followed by temporary fixation was done in 12 patients after a mean time gap of 188 days. Bony atlantoaxial fusion was necessary in 14 children, who were diagnosed after 319 days on average. Invasiveness of treatment was dependent on the time delay between development of dislocation and treatment; a significant difference was found between invasiveness of treatment and time to treatment (Kruskal-Wal

Study Design: Four orthopedic spine surgeons measured the radiological parameters of pedicle screws in the cervical spine using a postoperative computed tomography (CT) scan. Purpose: This study analyzed the insertion angle of CT-navigated insertion of pedicle screws in the subaxial cervical spine and classified them according to their position. Overview of Literature: Overall, a pedicle transverse angle of 33.6 degrees-50.2 degrees with a mean angle of 45 degrees relative to the midline has been reported in the literature. Methods: The insertion angles of 87 pedicle screws inserted using CT-based navigation in the subaxial cervical spine were measured in the postoperative CT. The screw positioning was determined according to the modified Gertzbein and Robbins classification. Results: Total 89.3% (n=78) of the pedicle screws inserted using CT-based navigation showed good placement. The mean insertion angle of the pedicle screws that showed good positioning was 29.9 degrees +/- 9.9 degrees. The pedicle screws showing bad positioning had a mean insertion angle of 26.8 degrees +/- 10.5 degrees (p=0.157). The interobserver reliability showed a reliable measurement intraclass correlation coefficient: 0.994 (95% confidence interval, 0.992-0.996). Conclusions: The present results show that the insertion angle of the pedicle screws in the subaxial cervical spine was smaller than the actual pedicle transverse angle, as per the literature. One reason for this discrepancy could be that the navigation systems allow the insertion of cervical pedicle screws with a lower convergence.

Background: Screw loosening is a major complication following spondylodesis. While several modifications increase screw stability, some, such as screw augmentation, are associated with potential complications; new techniques are needed to minimize the risk of screw loosening without increasing complication rates. Methods: 13 fresh-frozen human lumbar vertebral bodies (L1 to L5) were dissected. In group 1 (n = 7), pedicle screws were implanted conventionally, while in group 2 (n = 6), the screws were positioned divergent in the sagittal pathway. Screw stability was tested under cyclic axial load; one testing-cycle included 1000 repetitions. The first cycle started with a load of 100 N while the load was increased by + 20 N in each following cycle until failure. Failure was defined by either a > 5 mm movement of the screw heads or triggering of the switch-off threshold. Findings: Average number of cycles until failure was increased in group 2 compared with group 1 (12,046 vs 9761 cycles), as was the average load to failure (Fmax 313 N vs 260 N). Overall, in group 2, the number of cycles until screw loosening or failure increased by 23% (p = 0.28), while the required force increased by 20% (p = 0.3). Statistically significant correlation between BMD and increased number of cycles completed as well as with increased load (p < 0.01) could be observed. Interpretation: The results demonstrate, that divergent screw-drift of pairs of screws in the sagittal plane tends to increase stability, especially in vertebral bodies with lower bone density. Moreover, we could demonstrate a correlation between BMD and stability of screw-fixation.

Background: Thoracolumbar spine fractures in multiple-injured patients are a common injury pattern. The appropriate timing for the surgical stabilization of vertebral fractures is still controversial. The purpose of this study was to analyse the impact of the timing of spinal surgery in multiple-injured patients both in general and in respect to spinal injury severity. Methods: A retrospective analysis of multiple-injured patients with an associated spinal trauma within the thoracic or lumbar spine (injury severity score (ISS) >16, age >16 years) was performed from January 2012 to December 2016 in two Level I trauma centres. Demographic data, circumstances of the accident, and ISS, as well as time to spinal surgery were documented. The evaluated outcome parameters were length of stay in the intensive care unit (ICU) (iLOS) and length of stay (LOS) in the hospital, duration of mechanical ventilation, onset of sepsis, and multiple organ dysfunction syndrome (MODS), as well as mortality. Statistical analysis was performed using SPSS. Results: A total of 113 multiple-injured patients with spinal stabilization and a complete dataset were included in the study. Of these, 71 multiple-injured patients (63%) presented with an AOSpine A-type spinal injury, whereas 42 (37%) had an AOSpine B-/C-type spinal injury. Forty-nine multiple-injured patients (43.4%) were surgically treated for their spinal injury within 24 h after trauma, and showed a significantly reduced length of stay in the ICU (7.31 vs. 14.56 days;p< 0.001) and hospital stay (23.85 vs. 33.95 days;p= 0.048), as well as a significantly reduced prevalence of sepsis compared to those surgically treated later than 24 h (3 vs. 7;p= 0.023). These adverse effects were even more pronounced in the case where cutoffs were increased to either 72 h or 96 h. Independent risk factors for a delay in spinal surgery were a higher ISS (p= 0.036), a thoracic spine injury (p= 0.001), an AOSpine A-type spinal injury (p= 0.048), and an

Introduction Lumbar and lumbosacral spinal fusion is an established procedure for the treatment of degenerative spondylolisthesis. However, the impact of reduction in the affected segment and of improvement in the radiological sagittal parameters on the clinical outcome remains unclear. Purpose of the study is to analyze the correlation between the radiological sagittal parameters and clinical outcome after lumbar spinal fusion in low-grade degenerative spondylolisthesis. Materials and methods In a monocentric prospective, clinical study, patients with low-grade degenerative spondylolisthesis of a single lumbar segment have been included. All patients received a lumbar spinal fusion according to the pathology of the treated segment. Patients attended clinical and radiological follow-up examination 1 and 2 years postoperatively. Clinical outcome was assessed using the Core Outcome Measurement Index (COMI), the Oswestry Disability Index (ODI) and the EuroQol 5D. The sagittal spinopelvic radiological parameters, sagittal rotation and anterior displacement of the affected segment and lumbar lordosis were assessed. The correlation between the sagittal radiological parameters and clinical outcome was analyzed using Spearman-Rho bi-serial test. Results Sixty-two patients (35 female and 27 male) with an average age of 59.3 years were included in the study. All patients completed the follow-up examinations. Significant improvement in COMI, ODI and EuroQol 5D scores was shown in all follow-up examinations. Significant reduction in the anterior displacement was measured postoperatively, which was preserved during the follow-up. However, no correlation could be demonstrated between reduction in anterior displacement and improvement in clinical outcome. Nonetheless, correlation between correction of sagittal rotation and clinical outcome was shown. Conclusions Reduction in anterior displacement of the affected segment in the surgical treatment of low-grade degenerative spondylol

Purpose Various pathologies of the lumbosacral junction require fusion of the L5/S1 segment. However, pseudarthroses, which often come along with sacral screw loosening, are problematic. The aim of the present investigation was to elaborate the morphological features of the L5/S1 segment to define a so-called safe zone for bi- or tricortical screw placement without risking a damage of the iliac vessels. Methods A total of one hundred computed tomographies of the pelvis were included in this investigation. On axial and sagittal slices, pedicle morphologies, the prevertebral position of the iliac vessels, the spinal canal and the area with the largest bone density were analyzed. Results Beginning from the entry point of S1-srews iliac vessels were located at an average angle of 7 degrees convergence, the spinal canal at 38 degrees. Bone density was significantly higher centrally with a mean value of 276 Hounsfield Units compared to the area of the Ala ossis sacri. The largest intraosseous screw length could be achieved at an angle of 25 degrees. The average pedicle width was 20 mm and the pedicle height 13 mm. Conclusions A safe-zone for bicortical screw placement at S1 with regard to the course of the iliac vessels could be defined between 7 degrees and 38 degrees convergence. Regarding the area offering the largest bone density and the maximal possible screw length, a convergence of 25 degrees is recommended at S1 to reduce the incidence of screw loosening. Screw diameter, as a further influence factor on screw holding, is limited by pedicle height not pedicle width.

Background: Congenital scoliosis due to hemivertebra of the cervicodorsal spine is a rare disorder. It might be accompanied by impaired cosmetic appearances such as head tilt and trunk shift. Little is known about the effect of correction of the major curve on head tilt and trunk shift in children. The purpose of this study was to assess radiographic changes of head tilt and trunk shift following posterior hemivertebra resection (PHVR). Methods: Retrospectively, all children who underwent PHVR at the cervicodorsal spine (C6-Th6) with pedicle screw fixation with a minimum radiographic follow-up of 1 year were identified for further assessment. A total of 5 radiographic parameters were assessed on preoperative, postoperative, and final follow-up radiographs. (1) Head tilt was defined as the angle between the horizontal line and the line through both molars of the maxillary, (2) trunk shift as the angle between the line of the center of C7 to the sacrum and the central sacral vertical line, (3) Cobb angle was used to assess the major curve, (4) cranial, and (5) caudal compensatory curvature. Results: Seven boys and 10 girls with a mean age of 9.0 years at surgery were evaluated. The mean radiographic follow-up was 89.5 months (range: 12 to 166 mo). The mean head tilt reoriented from 6.9 to 1.9 degrees (P<0.001); trunk shift improved from 4.3 to 2.5 degrees after surgery (P=0.100). There was a significant correlation between head tilt and trunk shift on preoperative and postoperative radiographs (P=0.030/0.031). The major curve, and compensatory curvatures were all significantly corrected (P<0.001). Head reorientation was significantly influenced by patient age at surgery. Repeated procedures due to decompensation of the compensatory curvature were performed in 2 cases. Conclusions: PHVR and pedicle screw fixation is an effective treatment for patients with congenital scoliosis. Surgery achieves a significant correction of the major curve and reorientation of the head p

Background: Bicortical screw fixation is an established technique to increase screw strength in vertebral bodies, although it is associated with several complications, for example screw-loosening. Cement augmentation can increase stability of screw-fixation but can also cause various complications, such as cement-leakage or cement embolism. In this study, we tested a new, multicortical screw fixation technique in the sacrum. Methods: Four fresh-frozen sacrums were used. In group 1, standard screw insertion, with sagittal parallel and axial convergent screw-drive was performed. In group 2, the screw-drive of the first screw was similar to the screw-drive in group 1. In addition, a second screw was inserted descending into the intended hole in the head of the screw and at a stable angle. Therefore, the screws of the multiloc humerus nail-system (Synthes) were used. The specimens were connected to a testing-machine and underwent cyclic axial loading with an increase in the load after each completed stage. Findings: Multicortical screw fixation leads to a significant increase in the number of completed cycles and a significantly increased load until failure. Interpretation: Multicortical screw fixation in the sacrum offers a stronger attachment of the screws. In the future, multicortical implants, which fulfil the criteria demanded in spine surgery, can offer higher stability and may decrease the loosening rates of the implanted screws.

Traumatic atlantoaxial dislocation due to ligamentous and combined osseous injuries rarely occurs in adults. There are only few cases published in the literature. In this level 4 study, a cohort of nine consecutive patients suffering from traumatic atlantoaxial dislocation has been analyzed regarding morphology of injury, trauma mechanism, and outcome since 2007. Three types of those injuries have been found regarding direction of dislocation indicating the underlying ligamentous injuries as well as the accompanying grade of instability. Firstly, there was rotatory dislocation, if the alar ligaments were injured. Secondly, there occurred horizontal dislocation, when transverse atlantal ligament was damaged additionally. Thirdly, excessive ligamentous injury led to distraction of the atlantoaxial complex resulting in dissociation of the atlas against the axis. Additionally fractures of the atlas as well as of the odontoid process (type II or III according to Anderson/D'Alonzo) were diagnosed frequently. Atlantoaxial dislocation injuries, especially distraction injuries, offer a high risk for accompanied neurovascular disorders deserving reduction followed by surgical fixation. Only rotatory injuries leading to ligamentous damage solitarily can safely be successfully treated conservatively. Understanding of the injuries' morphology is essential, in order to set the correct diagnosis and to implicate the most advantageous treatment regime.

Severe spinal cord injuries cause permanent neurological deficits and are still considered as inaccessible to efficient therapy. Injured spinal cord axons are unable to spontaneously regenerate. Re-establishing functional activity especially in the lower limbs by reinnervation of the caudal infra-lesional territories might represent an effective therapeutic strategy. Numerous surgical neurotizations have been developed to bridge the spinal cord lesion site and connect the intact supra-lesional portions of the spinal cord to peripheral nerves (spinal nerves, intercostal nerves) and muscles. The major disadvantage of these techniques is the increased hypersensitivity, spasticity and pathologic pain in the spinal cord injured patients, which occur due to the vigorous sprouting of injured afferent sensory fibers after reconstructive surgery. Using micro-surgical instruments and an operation microscope we performed detailed anatomical preparation of the vertebral canal and its content in five human cadavers. Our observations allow us to put forward the possibility to develop a more precise surgical approach, the so called ventral root bypass that avoids lesion of the dorsal roots and eliminates sensitivity complications. The proposed kind of neurotization has been neither used, nor put forward. The general opinion is that radix ventralis and radix dorsalis unite to form the spinal nerve inside the dural sac. This assumption is not accurate, because both radices leave the dural sac separately. This neglected anatomical feature allows a reliable intravertebral exposure of the dura-mater ensheathed ventral roots and their damage-preventing end-to-side neurorrhaphy by interpositional nerve grafts. (C) 2018 Elsevier GmbH. All rights reserved.

If conservative treatment of osteoporotic vertebral compression fractures fails, vertebro- or kyphoplasty is indicated. Usually, polymethylmethacrylate cement (PMMA) is applied coming along with many disadvantageous features. Aluminum-free glass-polyalkenoate cement (GPC) appears to be a benefit alternative material. This study aimed at comparing the mean stress values in human vertebrae after kyphoplasty with PMMA and GPC (IlluminOss) at hand of a finite element analysis. Three models were created performing kyphoplasty using PMMA or IlluminOss, respectively, at two native, human lumbar vertebrae (L4) while one remains intact. Finite element analysis was performed using CT-scans of every vertebra. Moreover the PMMA-treated vertebra was used as a model as analyses were executed using material data of PMMA and of GPC. The unimpaired, spongious bone showed potentials of 0.25 MPa maximally. After augmentation stress levels showed fivefold increase, rising from externally to internally, revealing stress peaks at the ventral border of the spinal canal. At central areas of cement 1 MPa is measured in both types of cement. Around these central areas the von Mises stress decreased about 25-50% (0.5-0.75 MPa). If workload of 500 N was applied, the stress appeared to be more centralized at the IlluminOss-model, similar to the unimpaired. Considering the endplates the GPC model also closely resembles the unimpaired. Comparing the PMMA-treated vertebral body and the GPC-simulation, there is an obvious difference. While the PMMA-treated model showed a central stress peak of 5 MPa, the GPC-simulation of the same vertebral body presents lower stress of 1.2-2.5 MPa. Finite element analysis showed that IlluminOss (GPC), used in kyphoplasty of vertebral bodies, creates lower level stress and strain compared to standardly used PMMA, leading to lower stress concentrations on the cranial and caudal vertebral surface especially. GPC appears to own advantageous biological and clinical rel

Background: We compared functional, electrophysiological and morphological parameters after SCI in two groups of rats Sprague Dawley (SD) rats with normal vision and blind rats from a SD-substrain Royal College of Surgeons (SD/RCS) who lose their photoreceptor cells after birth due to a genetic defect in the retinal pigment epithelium. For these animals skin-, intramuscular-, and tendon receptors are major available means to resolve spatial information. Objective: The purpose of this study was to check whether increased sensitivity in SD/RCS rats would promote an improved recovery after SCI. Methods: All rats were subjected to severe compression of the spinal cord at vertebra Th8, spinal cord segment Th10. Recovery of locomotion was analyzed at 1, 3, 6, 9, and 12 weeks after SCI using video recordings of beam walking and inclined ladder climbing. Five functional parameters were studied: foot-stepping angle (FSA), rump-height index (RHI) estimating paw placement and body weight support, respectively, number of correct ladder steps (CLS) assessing skilled hindlimb movements, the BBB-locomotor score and an established urinary bladder score (BS). Sensitivity tests were followed by electrophysiological measurement of M- and H-wave amplitudes from contractions of the plantar musculature after stimulation of the tibial nerve. The closing morphological measurements included lesion volume and expression of astro- and microglia below the lesion. Results: Numerical assessments of BBB, FSA, BS, lesion volume and GFAP-expression revealed no significant differences between both strains. However, compared to SD-rats, the blind SD/RCS animals significantly improved RHI and CLS by 6 - 12 weeks after SCI. To our surprise the withdrawal latencies in the blind SD/RCS rats were longer and the amplitudes of M- and H-waves lower. The expression of IBA1-immunoreactivity in the lumbar enlargement was lower than in the SD-animals. Conclusion: The longer withdrawal latencies suggest a decreas

Previous studies have shown coherence between obesity and higher rates of complications following spinal surgery. However, there is a lack of information about the influence of obesity and the mass of outer abdominal fat (OAF) on adjacent segment instability after spinal fusion surgery. Radiographs of 194 patients with spinal fusion surgery were assessed retrospectively. Radiographs were performed after surgery during two years' follow-up and signs of adjacent segment instability were documented. Patients were classified regarding their BMI and extent of OAF was assessed using CT at the umbilical level. In 20 patients (10.3%) instability of adjacent segments occurred during followup. In this cohort mean OAF was significantly thicker (28.07 mm) compared to the patients without instability (22.39) (P=0.038). A total of 45% of patients with instability showed OAF of more than 30 mm at time of intervention compared to 10% in those without signs of instability. There exists significant correlation between the extent of OAF and development of adjacent segment instability postoperatively. Thus, weight reduction before spinal surgery could potentially decrease risk of adjacent segment instability.

Background. The most effective treatment of type H dens fractures according to Anderson and D'Alonzo remains controversial as there is no guidance on the choice of conservative or surgical therapy and if the anterior or the posterior approach is more advantageous. In 1993 Eysel and Roosen showed that the consolidation rate of type II odontoid fractures mostly depends on the morphology of the fracture and established a classification with corresponding treatment recommendations. Objective. The investigation aimed at clarifying the outcome of type II dens fractures treated according to the recommendations of Eysel and Roosen. Material and methods. Data of dens fractures from 72 patients were analyzed and categorized according to the Eysel and Roosen classification. Furthermore, the treatment was analyzed and the outcome was evaluated retrospectively using radiographs acquired during follow-up. Results. The mean age of the 72 patients was 70.7 years. Of the patients 19.4% suffered from type A, 75% from type B and 5.6% from type C fractures according to Eysel and Roosen. Out of the 72 patients 45 were assessed by computed tomography (CT) scan during follow-up. According to the recommendations of the authors 34 of the 41 patients with type A or type B fractures underwent anterior screw fixation of the dens and 3 out of the 4 patients with a type C fracture underwent a dorsal C1 and C2 fusion. After a mean follow- up of 7 months non-union was observed in 15.6% of the patients whereby 6 of the these patients were treated by surgery and 1 patient was managed conservatively. All of the patients who developed a non-union had a type B fracture. Conclusion. The simple clinical applicability together with the low rate of non-union development shows that the Eysel and Roosen classification appears to be a suitable guide for clinical use when deciding on the appropriate treatment regimen.

A common method in surgical treatment of midshaft clavicular fractures is the clavicle plating system. In addition to traditional osteosynthetic devices, anatomically preformed plate systems also exist. Advantages are described in greater accuracy of fit and less irritation of surrounding soft tissues. The purpose of this study was to compare the anatomical fit of five different precontoured clavicle plating systems. The anatomical fit of five different types of anatomical precontoured clavicle plates, 3 times VariaxSystemA (R) (Stryker, Kalamazoo, MI), MevesA (R) Plate (Ulrich medical Ulm, Germany) and LCP clavicle plate (Synthes, Bettlach, Switzerland) were investigated in 20 embalmed human cadaveric clavicles. An imprint of the space between the well-positioned plate and the clavicle was obtained using a silicone mass and the silicone imprint was digitally measured. Additionally, the anatomical fit was evaluated by three investigators following a standardized protocol (+2 to -2 points at lateral, midshaft and medial clavicle portions). The first three ranks went to the Stryker Variax-plates. They showed the least distance (Stryker 628027: 7aEurohole 1.44 mm, low curvature 0.93 mm-2.36 mm, 2. Stryker 628028: 8aEurohole low curvature 1.68 mm, 1.03 mm-2.4 mm and 3. Stryker 628128: 8aEurohole high curvature 1.87 mm, range 1.09 mm-3.1 mm) The evaluation of the anatomical fit by the investigators was in agreement with the measurement results. Although there was no complete congruency between the plates and the clavicle, all clavicle plates investigated in this study presented a reasonable anatomical shape. The 7aEurohole VariAx Stryker plate with slight curvature showed the best anatomical fit. A low profile and optimized anatomical precontouring can minimize irritation of the surrounding soft tissues and should be considered in plate design and implant choice.

Myelotomy is a surgical procedure allowing removal of extravasated blood and necrotic tissue that is thought to attenuate secondary injury as well as promote recovery in experimental spinal cord injury (SCI) models and humans. Here we examined in rat whether myelotomy at 48 h after low-thoracic compressive SCI provided any benefit over a 12 week period. Compared to animals receiving SCI alone, myelotomy worsened BBB scores (p < 0.05) and also did not improve plantar stepping, ladder climbing, urinary bladder voiding or sensory function (thermal latency) during the 12-week period. Quantitative analyses of tissue sections at 12 weeks showed that myelotomy also did not reduce lesion volume nor alter immunohistochemical markers of axons in spared white matter bridges, microglia, astrocytes or serotinergic fibres. However, myelotomy reduced synaptophysin expression, a marker of synaptic plasticity. We conclude that further studies are required to evaluate myelotomy after SCI. (142 words).

SCI is followed by dramatic upregulation of chondroitin sulfate proteoglycans (CSPGs) which limit axonal regeneration, oligodendrocyte replacement and remyelination. The recent discovery of the specific CSPGs signaling receptor protein tyrosine phosphatase sigma (RPTP sigma) provided an opportunity to refine the therapeutic approach to overcome CSPGs inhibitory actions. In previously published work, subcutaneous (s.c.) delivery of 44 mu g/day of a peptide mimetic of PTP sigma called intracellular sigma peptide (ISP), which binds to PTP sigma and blocks CSPG-mediated inhibition, facilitated recovery after contusive SCI. Since this result could be of great interest for clinical trials, we independently repeated this study, but modified the method of injury as well as peptide application and the dosage. Following SCI at the Th10-segment, 40 rats were distributed in 3 groups. Animals in group 1 (20 rats) were subjected to SCI, but received no treatment. Rats in group 2 were treated with intraperitoneal (i.p.) injections of 44 mu g/day ISP (SCI + ISP44) and animals of group 3 with s.c. injections of 500 mu g/day ISP (SCI + ISP500) for 7 weeks after lesioning. Recovery was analyzed at 1, 3, 6, 9 and 12 weeks after SCI by determining (i) BBB-score, (ii) foot-stepping angle, (iii) rump-height index, (iv) number of correct ladder steps, (v) bladder score and (vi) sensitivity (withdrawal latency after thermal stimulus). Finally, we determined the amount of serotonergic fibers in the preserved neural tissue bridges (PNTB) around the lesion site. Our results show that, systemic therapy with ISP improved locomotor, sensory and vegetative recovery which correlated with more spared serotonergic fibers in PNTB.

Background: Following spinal cord injury (SCI), exercise training provides a wide range of benefits and promotes activitydependent synaptic plasticity. Whole body vibration (WBV) in SCI patients improves walking and spasticity as well as bone and muscle mass. However, little is known about the effects of timing or frequency of intervention. Objective: To determine which WBV-onset improves locomotor and bladder functions and influences synaptic plasticity beneficially. Methods: SCI was followed by WBV starting 1, 7, 14, 28 days after injury (WBV1, WBV7, etc.) and continued for 12 weeks. Intact animals and those receiving SCI but no WBV (No WBV), SCI plus WBV twice daily (2xWBV) and SCI followed by passive hindlimb flexion-extension (PFE) served as controls. Locomotor [BBB rating, foot stepping angle (FSA) and rump-height index (RHI)] as well as bladder function were determined at 1, 3, 6, 9, and 12 weeks. Following perfusion fixation at 12 weeks, lesion volume and immunofluorescence for astrogliosis (GFAP), microglia (IBA1) and synaptic vesicles (synaptophysin, SYN) were determined. Results: Compared to the No WBV group, the WB7 and WBV14 groups showed significantly faster speeds of BBB score recovery though this effect was temporary. Considering RHI we detected a sustained improvement in the WBV14 and PFE groups. Bladder function was better in the WBV14, WBV28, 2xWBV and PFE groups. Synaptophysin levels improved in response to WBV7 and WBV14, but worsened after WBV28 in parallel to an increased IBA1 expression. Correlation- and principal components analysis revealed complex relationships between behavioural (BBB, FSA, RHI) and morphological (GFAP, IBA1, SYN) measurements. Conclusions: WBV started 14 days after SCI provides the most benefit (RHI, bladder); starting at 1day after SCI provides no benefit and starting at 28 days may be detrimental. Increasing the intensity of WBV to twice daily did not provide additional benefit.

Diameters of anterior and posterior atlantodental intervals (AADI and PADI) are diagnostically conclusive regarding ongoing neurological disorders in rheumatoid arthritis. MRI and X-ray are mostly used for patients' follow-up. This investigation aimed at analyzing these intervals during motion of cervical spine, when transverse and alar ligaments are damaged. AADI and PADI of 10 native, human cervical spines were measured using lateral fluoroscopy, while the spines were assessed in neutral position first, in maximal inclination second, and in maximal extension at last. First, specimens were evaluated under intact conditions, followed by analysis after transverse and alar ligaments were destroyed. Damage of the transverse ligament leads to an increase of the AADI's diameter about 0.65 mm in flexion and damage of alar ligaments results in significant enhancement of 3.59 mm at mean. In extension, the AADI rises 0.60 mm after the transverse ligament was cut and 0.90 mm when the alar ligaments are damaged. After all ligaments are destroyed, AADI assessed in extension closely resembles AADI at neutral position. Ligamentous damage showed an average significant decrease of the PADI of 1.37 mm in the first step and of 3.57 mm in the second step in flexion, while it is reduced about 1.61 mm and 0.41 mm in the extended and similarly in the neutrally positioned spine. Alar and transverse ligaments are both of obvious importance in order to prevent AAS and movement-related spinal cord compression. Functional imaging is necessary at follow-up in order to identify patients having an advanced risk of neurological disorders.

Background The odontoid process and the transverse ligament are the most important structures stabilising the atlantoaxial complex. It has not been fully elucidated how injuries of these structures contribute towards instability and a potential narrowing of the spinal canal. Therefore, our investigation aimed to perform a biomechanical analysis of spinal width and dislocation of the odontoid process depending on injuries of the aforementioned structures. Methods In 10 fresh human cadaveric specimens, physiologic flexion and extension were simulated under fluoroscopy in intact specimens and after application of an odontoid process fracture and transverse ligament rupture in a crossover design. The width of the spinal canal and the dislocation of fragments were measured. Results In the intact condition, values of 19.8/19.5/19.8mm (neutral/flexion/extension) were observed regarding spinal width. After an isolated fracture, values were 18.5/18.9/17.9mm. With additional ligamentous injury, values changed to 20.3/19.4/22.6mm. In the second group, values after initial ligament injury were 18.6/16.2/17.3mm and 16.6/14.1/18.7mm after fracture. Dislocation of fragments after an isolated fracture averaged 2.2/2.5/2.5mm; an additional ligamentous injury led to 2.6/2.2/2.2mm. In the second group, where a ligamentous injury preceded the fracture, a dislocation of 1.5/1.9/3.5mm was detected after the fracture. Conclusion Neurological disorders have been observed starting at a spinal canal constriction of 2.0mm. Our results demonstrate that a relevant constriction of the spinal canal may be due to isolated or combined injuries of the bone and the transverse ligament. Furthermore, our results show the importance of posttraumatic immobilisation of the spine with a view to the role of the transverse ligament for stabilisation of the atlantoaxial complex.

The technique of pedicle screw stabilization is finding increasing popularity for use in the cervical spine. Implementing anterior transpedicular screws (ATPS) in cervical spine offers theoretical advantages compared to posterior stabilization. The goal of the current study was the development of a new setting for navigated insertion of ATPS, combining the advantage of reduced invasiveness of an anterior approach with the technical advantages of navigation. 20 screws were implanted in levels C3 to C6 of four cervical spine models (SAWBONES(A (R)) Cervical Vertebrae with Anterior Ligament) with the use of 3D fluoroscopy navigation system [Arcadis Orbic 3D, Siemens and VectorVision fluoro 3D trauma software (BrainLAB)]. The accuracy of inserted screws was analyzed according to postoperative CT scans and following the modified Gertzbein and Robbins classification. 20 anterior pedicle screws were placed in four human cervical spine models. Of these, eight screws were placed in C3, two screws in C4, six screws in C5, and four screws in C6. 16 of 20 screws (80 %) reached a grade 1 level of accuracy according to the modified Gertzbein and Robbins Classification. Three screws (15 %) were grade 2, and one screw (5 %) was grade 3. Grade 4 and 5 positions were not evident. Summing grades 1 and 2 together as good positions, 95 % of the screws achieved this level. Only a single screw did not fulfill these criteria. The setting introduced in this study for navigated insertion of ATPS into cervical spine bone models is well implemented and shows excellent results, with an accuracy of 95 % (Gertzbein and Robbins grade 2 or better). Thus, this preliminary study represents a prelude to larger studies with larger case numbers on human specimens.

Communicative alignment refers to adaptation to one's communication partner. Temporal aspects of such alignment have been little explored. This article examines temporal aspects of lexical and syntactic alignment (i.e., tendencies to use the interlocutor's lexical items and syntactic structures) in task-oriented discourse. In particular, we investigate whether lexical and syntactic alignment increases throughout the discourse and whether alignment contributes to speedy task completion. We present data from a text-based chat game in which participants instructed each other on where to place objects in a grid. Our methodological approach allows calculating a robust baseline and revealed reliable lexical and syntactic alignment. However, only lexical alignment, but not syntactic alignment, was sensitive to temporal aspects in that only lexical alignment increased throughout the discourse and positively affected task completion time. We discuss how these results relate to the communicative task and mention implications for models of alignment.