Search

Quantum cascade detectors (QCDs) are mid-infrared and far-infrared, low-noise, photovoltaic detectors utilizing intersubband transitions. This Letter presents an InAs/AlAs0.16Sb0.84 based QCD lattice matched to an InAs substrate. This material system exhibits properties like a low effective electron mass of the well material of 0.023 m(0), beneficial for higher optical absorption strength, and a high conduction band offset of 2.1 eV, allowing the design of QCDs in the mid-infrared and near-infrared region. The presented QCD has a peak spectral response at 2.7 mu m (0.459 eV), the center of a CO2 absorption band. To enable top side illumination, a grating was implemented. This additionally bypasses absorption by the narrow bandgap 0.345 eV (3.54 mu m) InAs substrate material. The QCD has a peak responsivity at a room temperature of 5.63 mA/W and a peak specific detectivity of 1.14 x 10(8) Jones. (c) 2022 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Quantum cascade lasers (QCLs) facilitate compact optical frequency comb sources that operate in the mid-infrared and terahertz spectral regions, where many molecules have their fundamental absorption lines. Enhancing the optical bandwidth of these chip-sized lasers is of paramount importance to address their application in broadband high-precision spectroscopy. In this work, we provide a numerical and experimental investigation of the comb spectral width and show how it can be optimized to obtain its maximum value defined by the laser gain bandwidth. The interplay of nonoptimal values of the resonant Kerr nonlinearity and cavity dispersion can lead to significant narrowing of the comb spectrum and reveals the best approach for dispersion compensation. The implementation of high mirror losses is shown to be favorable and results in proliferation of the comb sidemodes. Ultimately, injection locking of QCLs by modulating the laser bias around the round trip frequency provides a stable external knob to control the frequency-modulated comb state and recover the maximum spectral width of the unlocked laser state.

Interband cascade infrared photodetectors (ICIPs) combine interband optical transitions with fast intraband transport to achieve high-frequency and broad-wavelength operation at room temperature. Here we study the bias-dependent electronic impulse response of ICIPs with a mid-infrared synchronously pumped optical parametric oscillator (OPO). Since the OPO produces ultrashort 104-fs pulses, it is possible to probe the impulse response of the ICIP. From this impulse response, we identify two characteristic decay times, indicating the contribution of electron as well as hole carriers. A reverse bias voltage applied to the ICIP reduces both time scales and leads to an increased electrical cut-off frequency. The OPO emits up to 500 mW average power, of which up to 10 mW is directed to the ICIP in order to test its saturation characteristics under short-pulse illumination. The peak of the impulse response profile as well as the average photocurrent experience a gradual saturation behavior, and we determine the corresponding saturation powers by measuring the photo-response as a function of average power directed to the ICIP. We demonstrate that an increasing reverse bias increases the saturation power as well as the responsivity of the ICIP.

The recent study of ring quantum cascade lasers [1] , [2] (QCLs, Fig. 1a ) revealed a new laser instability. It is triggered by phase turbulence akin to the wave instabilities that occur in other nonlinear systems such as fluids, superconductors and Bose-Einstein condensates. The choice of the ring geometry took inspiration from Kerr combs [3] , that are commonly generated in passive ring microresonators and have attracted great attention within the photonics community in the last years thanks to their rich physics.

A monochromatic wave that circulates in a nonlinear and dispersive optical cavity can become unstable and form a structured waveform. This phenomenon, known as modulation instability, was encountered in fiber lasers, optically pumped Kerr microresonators and, most recently, in monolithic ring quantum cascade lasers (QCLs). In ring QCLs, the instability led to generation of fundamental frequency combs—optical fields that repeat themselves once per cavity round trip. Here we show that the same instability may also result in self-starting harmonic frequency combs—waveforms that repeat themselves multiple times per round trip, akin to perfect soliton crystals in ring Kerr microresonators. We can tailor the intermode spacing of harmonic frequency combs by placing two minute defects with a well-defined separation between them along the ring waveguide. On-demand excitation of frequency comb states with few powerful modes spaced by hundreds of gigahertz may find their use in future sub-terahertz generators.

Semiconductor ring lasers are miniaturized devices that operate on clockwise and counterclockwise modes. These modes are not coupled in the absence of intracavity reflectors, which prevents the formation of a standing wave in the cavity and, consequently, of a population inversion grating. This should inhibit the onset of multimode emission driven by spatial hole burning. Here we show that, despite this notion, ring quantum cascade lasers inherently operate in phase-locked multimode states, that switch on and off as the pumping level is progressively increased. By rewriting the master equation of lasers with fast gain media in the form of the complex Ginzburg-Landau equation, we show that ring frequency combs stem from a phase instability---a phenomenon also known in superconductors and Bose-Einstein condensates. The instability is due to coupling of the amplitude and phase modulation of the optical field in a semiconductor laser, which plays the role of a Kerr nonlinearity, highlighting a connection between laser and microresonator frequency combs.

Funding: Austrian Science Fund (F4909-N23, P28914-N27,W1243); Österreichische Forschungsförderungsgesellschaft (ATMO-SENSE, ERANet Photonic Sensing program, COMTERA-FFG849614); European Science Foundation (ESF) (CZ.02.2.69/0.0/0.0/16_027/0008371); Air Force Office of Scientific Research(AFOSR FA9550-17-1-0340). The generation of mid-infrared pulses in monolithic and electrically pumped devices is of great interest for mobile spectroscopic instruments. The gain dynamics of interband cascade lasers (ICL) are promising for mode-locked operation at low threshold currents. Here, we present conclusive evidence for the generation of picosecond pulses in ICLs via active mode-locking. At small modulation power, the ICL operates in a linearly chirped frequency comb regime characterized by strong frequency modulation. Upon increasing the modulation amplitude, the chirp decreases until broad pulses are formed. Careful tuning of the modulation frequency minimizes the remaining chirp and leads to the generation of 3.2 ps pulses. Publisher PDF

Funding: Austrian Science Fund (FWF) within the projects "NanoPlas" (P28914-N27), "Building Solidsfor Function" (Project W1243), "NextLite" (F4909-N23), as well as by the Austrian Research Promotion Agency through the ERA-Net Photonic Sensing program, project "ATMO-SENSE" (FFG:861581). H.D. was supported by the ESF project CZ.02.2.69/0.00.0/16_027/0008371. A.M.A was supported by the projects COMTERA - FFG 849614 and AFOSR FA9550-17-1-0340. New insights into the laser dynamics of interband cascade lasers reveal the possibility to generatefrequency modulated combs by utilizing their inherent gain nonlinearity. The resultingcomb state is characterized by chirped instantaneous frequency, which appears to be universalto frequency combs based on gain induced four-wave mixing. The fast dynamics in the injectorsfurther allow the realization of exceptionally sensitive and high-speed photodetectors,operating at room-temperature, using the very same epilayer structure. With the capability ofintegrating frequency combs and ultra-fast detectors on a single chip consuming less than awatt of electric power, interband cascade laser technology provides a complete and unmatchedplatform for future monolithic and battery-driven dual-comb spectrometers. Publisher PDF