Search

Background and aims Higher plants represent an optimal tool to regenerate resources while producing food in Space. However, the configuration of fertile cultivation substrates based on extraterrestrial resources is still a challenge. We evaluated the adaptability of potato (Solanum tuberosum L., cv. ‘Colomba’) to the growth on six substrates: the MMS-1 Mars regolith simulant, alone (R100) and in mixture with 30% in vol. of green compost (R70C30), a fluvial sand, alone or mixed with 30% of compost (S100 and S70C30), a red soil from Sicily (RS), and a volcanic soil from Campania (VS). Methods We assessed the physicochemical properties of the substrates, and the physiological and biometric parameters of potato plants grown in pot on these substrates, in cold glasshouse. Results Both R100 and S100 were alkaline (pH ≥ 8.6) and coarse-textured, lacking organic matter and pivotal macronutrients. The amendment with compost significantly lowered their alkaline pH and improved the chemical fertility. The sandy-loam textured VS was sub-alkaline, slightly calcareous, with higher organic C and nutrient availability than RS. This latter was neutral-to-sub-alkaline, clay textured, poorly calcareous, with significantly higher CEC than VS. Leaf CO2 assimilation rate was higher in plants grown in terrestrial soils and S100. Plant growth was greater in VS, R70C30 and S70C30, while it was reduced on R100. Plants produced healthy tubers on all the substrates. Conclusion MMS-1 regolith simulant was found poor in nutrients and unsuitable to sustain adequately the plant growth. Amendment with organic compost improved MMS-1 physiochemical properties and fertility and plant performance.

The in-situ resource utilisation (ISRU), in terms of native rocky materials and astronaut wastes, is crucial in contests of soil-based space-farming. Nevertheless, extra-terrestrial soils are very different from Earth soils, lacking any form of organic carbon and associated macro and micronutrients. In this research, we aimed to study and modify two commercially available Lunar and Martian regolith simulants (LHS-1 from Exolith Lab and MMS-1 from Martian Garden) to make them an adequate medium for plant growth. Lettuce was chosen as reference crop to guide the discussion on the results obtained. To reach this main objective, we added to simulants a commercially available monogastric-based organic manure chosen as a substitute of a possible organic amendment produced onboard. The simulant/manure mixture rates were 100:0, 90:10, 70:30, 50:50; w:w. As expected, an approximately linear increase of total and bioavailable contents of macro (N, S, P, Ca, K, Mg) and micro (Fe, Mn, Cu, Zn) nutrients with increasing manure addition to simulants was observed. On the other hand, the very high pH of manure (pH, 9.02) along with its salinity (EC, 6.7 dS m−1) and sodicity (Na, 5.3 g kg−1), did not correct the already high pH of simulants (very high for LHS-1), but rather raised their soluble salt content and sodium amount on the exchange complex. In addition, an increase of toxic soluble aluminium and heavy elements (Pb, Ni, Cr, V) was observed, mainly in the strongly alkaline lunar simulant/manure mixtures. The addition of an organic source also produced a generalised improvement of water retention and hydraulic conductivity of both regolith simulants, in proportion to the percentage of manure addiction. For both situations, the best mixture ratio was 70:30. In terms of water retained, the LHS-1 mixtures benefited more than the MMS-1 ones by manure addition since water was held more in the “dry” (between −100 and −600 cm of matric potential head) than in the “humid” (between −25 and −100 cm of matric potential head) region of water retention. This would make LHS-1 mixtures more useful for cultivation of lettuce, at least in terms of physico-hydraulic properties. Nevertheless, the overall characterisation of the mixtures unveiled that MMS-1-based substrates can ensure better agronomic performances than LHS-1 ones, mainly due to lower pHs and higher nutrient availability; this divergent fertility was particularly evident at 90:10 simulant/manure rate and tend to be mitigated by increasing the levels of manure.

Heavy payloads in future shuttle journeys to Mars present limiting factors, making self-sustenance essential for future colonies. Therefore, in situ resources utilization (ISRU) is the path to successful and feasible space voyages. This research frames the concept of planting leafy vegetables on Mars regolith simulant, ameliorating this substrate&rsquo, s fertility by the addition of organic residues produced in situ. For this purpose, two butterhead lettuce (Lactuca sativa L. var. capitata) cultivars (green and red Salanova&reg, ) were chosen to be cultivated in four different mixtures of MMS-1 Mojave Mars simulant:compost (0:100, 30:70, 70:30 and 100:0, v:v) in a phytotron open gas exchange growth chamber. The impact of compost rate on both crop performance and the nutritive value of green- and red-pigmented cultivars was assessed. The 30:70 mixture proved to be optimal in terms of crop performance, photosynthetic activity, intrinsic water use efficiency and quality traits of lettuce. In particular, red Salanova&reg, showed the best performance in terms of these quality traits, registering 32% more phenolic content in comparison to 100% simulant. Nonetheless, the 70:30 mixture represents a more realistic scenario when taking into consideration the sustainable use of compost as a limited resource in space farming, while still accepting a slight significant decline in yield and quality in comparison to the 30:70 mixture.

Plant cultivation systems for Bioregenerative Life-Support Systems in Space developed on Earth need to be tested in space, where reduced gravity alters the liquid and gas behavior both within the plant and between the plant and its surrounding environment, making the distribution of water and nutrients a critical issue. The ESA project "Precursor of Food Production Unit" (PFPU) aims to design a modular cultivation system for edible tuberous plants (such as potato and sweet potato) in microgravity, to be preliminary tested in ground conditions in the view of successive space application. Among the different modules of the PFPU demonstrator, the Root Module (RM) is the component physically hosting the plant and accommodating tubers and roots. This paper describes the step-by-step procedure adopted to realize the RM, including the design, the building, and the ground testing of its prototype. Specifically, the hydrological characterization of possible cultivation substrates, the set-up of the water distribution system, and the validation test of the assembled prototype in a tuber-to-tuber growing cycle of potato plants are described. Among six substrates tested, including three organic materials and three synthetic materials, cellulosic sponge was selected as the best one, based on the hydrological behavior in terms of air and water transport and water retention capacity. The water sensor WaterScout was successfully calibrated to monitor the water status in cellulosic sponge and to drive irrigation and fertigation management. The designed porous tubes-based distribution system, integrated with water sensors, was able to provide water or nutrient solution in a timely and uniform way in cellulosic sponge.

The present study examined the modulatory effects of natural fiber substrates (agave fiber, coconut fiber and peat moss) and synthetic alternatives (capillary mat and cellulose sponge) on the nutritive and phytochemical composition of select microgreens species (coriander, kohlrabi and pak choi) grown in a controlled environment. Polyphenols were analyzed by UHPLC-Q-Orbitrap-HRMS, major carotenoids by HPLC-DAD, and macro-minerals by ion chromatography. Microgreens grown on peat moss had outstanding fresh and dry yield but low dry matter content. Natural fiber substrates increased nitrate and overall macro-mineral concentrations in microgreens compared to synthetic substrates. The concentrations of chlorophylls, carotenoids and ascorbate were influenced primarily by species. On the contrary, variability in polyphenols content was wider between substrates than species. Out of twenty phenolic compounds identified, chlorogenic acid and quercetin-3-O-rutinoside were most abundant. Hydroxycinnamic acids and their derivatives accounted for 49.8% of mean phenolic content across species, flavonol glycosides for 48.4% and flavone glycosides for 1.8%. Peat moss provided optimal physicochemical conditions that enhanced microgreens growth rate and biomass production at the expense of phenolic content. In this respect, the application of controlled stress (eustress) on microgreens growing on peat moss warrants investigation as a means of enhancing phytochemical composition without substantial compromise in crop performance and production turnover. Finally, nitrate deprivation practices should be considered for microgreens grown on natural fiber substrates in order to minimize consumer exposure to nitrate.

The configuration of a biologically active and fertile substrate consisting mainly of Martian regolith to facilitate the growth of edible plants during long-term manned missions to Mars constitutes one of the main challenges in spatial research. Regolith amendment with compost derived from recycled crew effluent crop waste generated by bioregenerative life support systems constitutes a substrate that may contribute to upgrade crew autonomy and long-term survival in space. In this context, the present work aimed to: i) study the geochemical and mineralogical composition of MMS-1 Mars simulant and the physicochemical and hydraulic properties of mixtures obtained by mixing MMS-1 and green compost at varying rates (0:100, 30:70, 70:30, 100:0; v:v); ii) evaluate the potential use of MMS-1 as growing medium of two lettuce cultivars; iii) assess how compost addition may impact on sustainability of space agriculture exploiting local resources. MMS-1 is a coarse-textured alkaline substrate consisting mostly of plagioclase, amorphous material and, to a lesser extent, zeolite, hematite and smectites. Although it can be source of nutrients, it lacks of organic matter, nitrogen (N), phosphorus (P) and sulphur (S), which may be supplied by compost. Both lettuce (Lactuca sativa L.) cultivars were able to grow on all mixtures for 19 days under fertigation. Red Salanova lettuce produced a statistically-greater dry biomass, leaf area and number than green Salanova. Leaf area and plant dry biomass were higher on 30:70 simulant/compost mixture. The shoot/root ratio of plants decreased as simulant in growth substrate increased. Lack of biological fertility and possible salt stress negatively impacted on plants grown in non-amended simulant. Our results show that it is possible to grow crops in Martian simulants adequately amended and fertilized. However, many remaining issue warrant further investigation concerning the dynamics of compost production, standardization of supply during long-term manned missions and representativeness of simulants to real Martian regolith.

This paper deals with the environmental characterization of a large and densely populated area, with a poor reputation for contamination, considering the contribution of environmental features (air, soil, soil hydraulic and groundwater) and the potential effects on human health. The use of Geographic Information System (GIS) has made possible a georeferenced inventory and, by overlaying environmental information, an operational synthesis of comprehensive environmental conditions. The cumulative effects on environmental features were evaluated, taking into account superposition effects, by means of the spatial multicriteria decision analysis (S-MCDA). The application of the S-MCDA for converging the combination of heterogeneous factors, related to soil, land and water, deeply studied by heterogeneous groups of experts, constitutes the novelty of the paper. The results confirmed an overall higher potential of exposure to contaminants in the environment and higher mortality rates in the study area for some tumours, but hospital admissions for tumours were generally similar to the regional trend. Besides, mortality data may be strictly dependent on the poor socioeconomic conditions, quality of therapy and a lack of welfare in the area relative to the rest of Italy. Finally, as regards the possible relationship between presence of contaminants in the environment and health conditions of the population no definite conclusions can be drawn, although the present study encourages the use of the new proposed methods, that increase the possibilities for studying the combined effect of more environmental factors.

Innovative experimental field designs and methods are instrumental for dissecting hydrological processes in hillslopes. However, experimental studies at the catchment scale are rarely affordable to most research groups, and laboratory flumes are oversimplified to reproduce natural phenomena. In this work, we present the innovative “hybrid” experimental plot of Cape Fear, which features controllable water fluxes and boundary conditions, but it is directly exposed to external atmospheric agents. We demonstrate the suitability of Cape Fear to study hydrological phenomena through a feasibility test, whereby the response of the plot to a natural storm is in line with the well-known hydrological response of natural hillslopes. Future studies will address the influence of the plot geometry parameters on rill formation.

This paper deals with the environmental characterization of a large and densely populated area, with a poor reputation for contamination, considering the contribution of environmental features (air, soil, soil hydraulic and groundwater) and the potential effects on human health. The use of Geographic Information System (GIS) has made possible a georeferenced inventory and, by overlaying environmental information, an operational synthesis of comprehensive environmental conditions. The cumulative effects on environmental features were evaluated, taking into account superposition effects, by means of the Spatial MultiCriteria Decision Analysis (S-MCDA). The application of the S-MCDA for converging the combination of heterogeneous factors, related to soil, land and water, deeply studied by heterogeneous groups of experts, constitutes the novelty of the paper. The results confirmed an overall higher potential of exposure to contaminants in the environment and higher mortality rates in the study area for some tumours, but hospital admissions for tumours were generally similar to the regional trend. Besides, mortality data may be strictly dependent on the poor socioeconomic conditions, quality of therapy and a lack of welfare in the area relative to the rest of Italy. Finally, as regards the possible relationship between presence of contaminants in the environment and health conditions of the population no definite conclusions can be drawn, although the present study encourages the use of the new proposed methods, that increase the possibilities for studying the combined effect of more environmental factors.

Hillslope processes are fundamental for the comprehension of the hydrological response of natural systems. However, their complexity demands real time and continuous observations. In this paper, we assess the feasibility of studying streamflow generation processes at Cape Fear, a "hybrid" hillslope plot at University of Tuscia, Viterbo, Italy. Cape Fear is a 7 × 7 m2 confined soil-filled wood-sided plot, whose water fluxes can be continuously monitored. The plot design is simple, yet versatile to test hypotheses on the hydrological response of hillslope areas. The suitability of the plot for investigating runoff generation and hillslope processes is presented through a demonstrative experiment in the case of a natural rainfall event. A combination of traditional and innovative measurement techniques confirms that runoff onset is due to saturation overland flow. Future studies will address the influence of diverse land covers and spatial pathways evolution on the response at the hillslope scale.

We investigate the potential impact of accounting for seasonal variations in the climatic forcing and using different methods to parameterize the soil water content at field capacity on the water balance components computed by a bucket model (BM). The single-layer BM of Guswa et al. (2002) is employed, whereas the Richards equation (RE) based Soil Water Atmosphere Plant (SWAP) model is used as a benchmark model. The results are analyzed for two differently-textured soils and for some synthetic runs under real-like seasonal weather conditions, using stochastically-generated daily rainfall data for a period of 100 years. Since transient soil-moisture dynamics and climatic seasonality play a key role in certain zones of the World, such as in Mediterranean land areas, a specific feature of this study is to test the prediction capability of the bucket model under a condition where seasonal variations in rainfall are not in phase with the variations in plant transpiration. Reference is made to a hydrologic year in which we have a rainy period (starting 1 November and lasting 151 days) where vegetation is basically assumed in a dormant stage, followed by a drier and rainless period with a vegetation regrowth phase. Better agreement between BM and RE-SWAP intercomparison results are obtained when BM is parameterized by a field capacity value determined through the drainage method proposed by Romano and Santini (2002). Depending on the vegetation regrowth or dormant seasons, rainfall variability within a season results in transpiration regimes and soil moisture fluctuations with distinctive features. During the vegetation regrowth season, transpiration exerts a key control on soil water budget with respect to rainfall. During the dormant season of vegetation, the precipitation regime becomes an important climate forcing. Simulations also highlight the occurrence of bimodality in the probability distribution of soil moisture during the season when plants are dormant, reflecting that soil, it being of coarser or finer texture, can be preferentially in either wetter or drier states over this period.

Within the framework of a research project examining the spatial variability of hydraulic characteristics of soil intended for irrigation, some of the more frequently used analytical expressions describing the laws linking diffusivity D to the water content of the soil 􀀅 were verified. By studying the flow field of soil samples tested in the laboratory, under one-dimensional wetting and drying cycles, it has been found that the laws of hydraulic diffusivity of the exponential types can be ascribed to them. Finally, a simplified laboratory method was proposed which, with the aid of nomographs, allows the definition of the law D(􀀅) to be easily arrived at.

Tree crops are representing one of most widespread agricultural systems in Mediterranean regions, thus contributing in a substantial way to the economy and productivity of primary sectors of the countries interested. Besides the aspects concerning their economical relevance, tree crops like vineyards, olive and orange orchards are also typical elements of the Mediterranean landscape, and their ecological role has been recently revitalised in consideration of their function as carbon sinks for the Kyoto agreement. The environmental and economical sustainability of these agricultural systems in arid and semi-arid zones has to cope with the availability and management of water resources for irrigation. During recent years there has been a substantial progress in understanding the evolution of evapotranspiration processes in cropping systems, and detailed models and measurement techniques have been set-up for describing the mass and energy exchanges in the soil-plant- atmosphere continuum. However, due to the complexity of rooting systems and aerial parts further steps are needed for a full comprehension of hydrological processes in tree crop systems, with special regard to water stress conditions. Within the research project P.R.I.N. 2008 “ Assessment of mass and energy fluxes for the irrigation management of Mediterranean tree crops ” different techniques for measuring evapotranspiration fluxes in tree crops will be developed and tested, from innovative methodologies based on remote sensing observations to in-situ observations (xylem-flow measurements and micro-meteorology). These data-sets have be interpreted by means of physical approaches, with a modelling perspective of the observed processes.

Neutropenia is a hematologic adverse event characterized by an absolute neutrophil count (ANC) lower than 1500 cells/mL. This reduction may be due to decreased neutrophil production, accelerated use, a shift in compartments of neutrophils, or a combination of these factors. Neutropenia is often associated with infections, which are major causes of morbidity and mortality in patients with cancer. In patients with multiple myeloma, the novel agents thalidomide, lenalidomide, and bortezomib have improved outcome, but chemotherapy-related neutropenia should be carefully considered. Chemotherapy-related high-risk factors for severe neutropenia include regimens with an expected neutropenia rate of > 50%, such as the 3-drug combinations including lenalidomide plus alkylating agents or doxorubicin, whereas low-risk regimens include combinations of the novel agents with dexamethasone alone. Patient characteristics, disease stage, type of current and previous treatment, and ANC < 1000 cells/mL at baseline are additional factors that define the risk of severe neutropenia. Granulocyte-colony stimulating factor (G-CSF) should be used to manage chemotherapy-related neutropenia so that patients may stay on treatment for a longer time and benefit from it. Primary G-CSF prophylaxis should be used when high-risk regimens are administered or when low/intermediate-risk regimens are used and additional risk factors are present. Reactive G-CSF treatment is indicated when patients undergoing low-risk chemotherapy experience grade 3/4 neutropenia. If ANC restores to > 1000 cells/mL, therapy can be resumed with no dose modifications. In case of persistence of severe neutropenia, treatment should be delayed until ANC reaches > 1000 cells/mL, and dose reductions are necessary.

[1] Basic soil properties have long been used to predict unsaturated soil hydraulic properties with pedotransfer function (PTFs). Implementation of such PTFs is usually not feasible for catchment-scale studies because of the experimental effort that would be required. On the other hand, topographical attributes are often readily available. This study therefore examines how well PTFs perform that use both basic soil properties and topographical attributes for a hillslope in Basilicata, Italy. Basic soil properties and hydraulic data were determined on soil samples taken at 50-m intervals along a 5-km hillslope transect. Topographical attributes were determined from a digital elevation model. Spearman coefficients showed that elevation (z) was positively correlated with organic carbon (OC) and silt contents (0.62 and 0.59, respectively) and negatively with bulk density (ρb) and sand fraction (−0.34 and −0.37). Retention parameters were somewhat correlated with topographical attributes z, slope (β), aspect (cosϕ), and potential solar radiation. Water contents were correlated most strongly with elevation (coefficient between 0.38 and 0.48) and aspect during “wet” conditions. Artificial neural networks (ANNs) were developed for 21 different sets of predictors to estimate retention parameters, saturated hydraulic conductivity (Ks), and water contents at capillary heads h = 50 cm and 12 bar (103 cm). The prediction of retention parameters could be improved with 10% by including topography (RMSE = 0.0327 cm3 cm−3) using textural fractions, ρb, OC, z, and β as predictors. Furthermore, OC became a better predictor when the PTF also used z as predictor. The water content at h = 50 cm could be predicted 26% more accurately (RMSE = 0.0231 cm3cm−3) using texture, ρb, OC, z, β, and potential solar radiation as input. Predictions of ANNs with and without topographical attributes were most accurate in the wet range (0 < h < 250 cm). Semivariograms of the hydraulic parameters and their residuals showed that the ANNs could explain part of the (spatial) variability. The results of this study confirm the utility of topographical attributes such as z, β, cosϕ, and potential solar radiation as predictors for PTFs when basic soil properties are available. A next step would be the use of topographical attributes when no or limited other predictors are available.

Scarce water resources frequently limit crop production in semi-arid lands. Drip irrigation may constitute a method for sagacious management of water resources, but there is still limited information on its use for sugar beet crop in Mediterranean environments. The present study was conducted to determine the effect of irrigation on sucrose accumulation and root yield, as well as on sugar beet physiological responses, and to compare drip and low-pressure sprinkler (high efficiency) irrigation performances for sugar quality. As the main scope of the study was to give indications to allow water saving, the comparison focused on the best irrigation method when a similar amount of water was applied. Sugar beets were grown in an experimental field site in southern Italy (Molise Region) for two consecutive growing seasons (1999/2000 and 2000/2001). The water applied ranged from 50, 75, and 100% of the estimated evapotranspiration (ET); unirrigated sugar beets were taken as control plants. In both years, harvest was completed in two periods. Increasing volume of water replaced was advantageous for crop performances, and yield and physiological responses of sugar beets drip irrigated with 75% of estimated ET matched in most cases those of low-pressure sprinkler irrigated with 100% of estimated ET, resulting in potential 25% of water volume saving. In general, drip irrigation influenced positively many of the considered physiological and technological parameters, as compared to low-pressure sprinkler irrigation. Differences in root production and sugar quality between the two harvest periods were not significant. Results indicate that (1) increasing the amount of water applied gives benefits in terms of sugar beet root yield and sucrose accumulation, (2) drip irrigation (even applied every-other-furrow) appears to be consistently advantageous with respect to low-pressure sprinkler irrigation for sugar beet performances in semi-arid environments, (3) there are indications that suggest sugar beet growers should harvest in advance (of traditional harvest dates).