Search

The Advanced Power Extraction (APEX) project has been exploring concepts for power producing blankets that can enhance the potential of fusion energy. The pursued concepts cover both liquid and solid wall designs. The solid wall blanket branch of the project has been concentrating on the use of nano-composited ferritic (NCF) steel structure coupled with Flibe (Li 2 BeF 4 ) coolant. The present blanket is a solid wall design with an innovative coolant scheme, which allows part of the coolant to be re-circulated in order to enhance the outlet temperature, and thus improve the power cycle efficiency. The structure is 12YWT, an oxide dispersion strengthened (ODS) ferritic steel, which has a maximum operating temperature of 800 °C and a compatibility with Flibe up to 700 °C. Several methods for fabricating the complex geometry of the first wall (FW) and blanket are presented. Preliminary coolant routing is proposed with solutions offered for minimizing heat losses and simplifying assembly and maintenance. Even though this blanket is somewhat complicated, its forward looking aims, that of maximizing nuclear performance to achieve a high thermal conversion efficiency, are well worth striving for.

As an element in the US Advanced Power Extraction (APEX) program, we evaluated the design option of using advanced nanocomposite ferritic steel (AFS) as the structural material and Flibe as the tritium breeder and coolant. We selected the recirculating flow configuration as our reference design. Based on the material properties of AFS, we found that the reference design can handle a maximum surface heat flux of 1 MW/m2, and a maximum neutron wall loading of 5.4 MW/m2, with a gross thermal efficiency of 47%, while meeting all the tritium breeding and structural design requirements. This paper covers the results of the following areas of evaluation: materials selection, first wall and blanket design configuration, materials compatibility, components fabrication, neutronics analysis, thermal hydraulics analysis including MHD effects, structural analysis, molten salt and helium closed cycle power conversion system, and safety and waste disposal of the recirculating coolant design.

The DIII–D program has completed a series of density control and plasma core confinement experiments this past year. These experiments were designed to investigate the performance of baffled and open divertors with single-null plasmas and particle control in double-null plasmas. The experiments utilized all three of the DIII–D divertor assemblies located in the lower outer corner, the upper outer corner, and the upper inner corner of the vessel, which were installed last year. Each divertor consists of a liquid helium cryopump, a shielded protective ring, and a gas puff system. The divertors were designed to optimize pumping performance and to withstand the electromagnetic loads from both halo and toroidal, induced currents. With theoretical pumping speeds varying from 15,000 to 32,000 l/s, the cryopumps, combined with the baffle structures, collect particles and prevent them from recirculating back into the plasma core. The intent of the gas puff systems is to inject neutral gases in and around the divertors to minimize the heat flux on the divertors, minimizing the impurities generated by the excessive heating of the divertor graphite tiles. This hardware permits either single- or double-null plasma experiments and enables continued research of well confined high beta divertor plasmas with noninductive current drive, which is one of the primary research goals of DIII–D.

The radiative divertor program of DIII-D is in its final phase with the installation of the cryopump and baffle structure (Phase 1B Divertor) in the upper inner radius of the DIII-D vacuum vessel at the end of this calendar year. This divertor, in conjunction with the Advanced Divertor and the Phase 1A Divertor, located in the lower and upper outer radius of the DIII-D vacuum vessel respectively, provides pumping for density control of the plasma while minimizing the effects on the core confinement. Each divertor consists of a cryo/helium cooling ring and a shielded protective structure. The cryo/helium-cooled pumps of all three diverters exhaust helium from the plasma. The protective shielded structure or baffle structure, in the case of the diverters located at the top of the vacuum vessel, provides baffling of neutral charged particles and minimize the flow of impurities back into the core of the plasma.