Search

The hot compression behavior of 316LN stainless steel for the supporting system in a magnet confinement fusion reactor was isothermally compressed at 1,050℃ and 0.1 s−1. Electron backscatter diffraction was used to study the microstructure and texture evolution during the deformation process. The results showed that the necklace structure is eventually formed by increasing compression strain due to dynamic recrystallization (DRX). The proportion of low-angle grain boundaries first increases and then decreases. The dominant DRX mechanism of 316LN is discontinuous DRX, which is characterized by the grain boundary bulging. Besides, twinning is found to be induced to accommodate the plastic strain, helping the development of DRX.

Different combinations of normalizing and tempering were carried out to optimize the microstructure and enhance the high-temperature mechanical properties of HRB400FR fire-resistant steel bars. The results showed that with the increasing of the tempering temperature from 400 to 600°C, the steel bar’s hardness decreases linearly, mainly due to the formation of quasi-polygon ferrite and granular bainite. Besides, the reduced width and the dissolution of the lath bainite also undermine the performance of the tempered steel bars. The highest Vickers hardness of 380 HV is achieved when the steel is normalized at 950°C and then tempered at 400°C, mainly due to precipitation strengthening and bainite strengthening. The hardness of the test steel tempered at 600°C gives the lowest value, only 230 HV since the least amount of bainite is obtained. When the tempering temperature reaches 650°C, the hardness rises to 260 HV due to the formation of the lath bainite. The emergence of needle bainite generally reduces the matrix grain size, and the appearance of lath martensite refines the precipitated carbides.

Coating materials applied for intraosseous implants must be optimized to stimulate osseointegration. Osseointegration is a temporal and spatial physiological process that not only requires interactions between osteogenesis and angiogenesis but also necessitates a favorable immune microenvironment. It is now well-documented that hierarchical nano-micro surface structures promote the long-term stability of implants, the interactions between nano-micro structure and the immune response are largely unknown. Here, we report the effects of microporous titanium (Ti) surfaces coated with nano-hydroxyapatite (HA) produced by micro-arc oxidation and steam-hydrothermal treatment (SHT) on multiple cell behavior and osseointegration. By altering the processing time of SHT it was possible to shift HA structures from nano-particles to nano-rods on the microporous Ti surfaces. Ti surfaces coated with HA nano-particles were found to modulate the inflammatory response resulting in an osteoimmune microenvironment more favorable for osteo-/angio-genesis, most likely via the activation of certain key signaling pathways (TGF-β, OPG/RANKL, and VEGF). By contrast, Ti surfaces coated with nano-rod shaped HA particles had a negative impact on osteo-/angio-genesis and osteoimmunomodulation. In vivo results further demonstrated that Ti implant surfaces decorated with HA nano-particles can stimulate new bone formation and osseointegration with enhanced interaction between osteocytes and implant surfaces. This study demonstrated that Ti implants with micro-surfaces coated with nano-particle shaped HA have a positive impact on osseointegration. Statement of Significance Osteo-/angio-genesis are of importance during osteointegration of the implants. Recent advances unravel that immune response of macrophages and its manipulated osteoimmunomodulation also exerts a pivotal role to determine the fate of the implant. Surface nano-micro modification has evidenced to be efficient to influence osteogenesis, however, little is known links nano-microstructured surface to immune response, as well the osteoimmunomodulation. This study demonstrates that the nano-particles decorated micro-surface, compared with the nano-rods decorated micro-surface enables osteogenesis and angiogenesis concurrently that has not been investigated previously. This study also unravels that the immune response of macrophages can be manipulated by the nano-micro surface, especially the nano-dimension matters, leading to a differential effect on osteointegration. The additional knowledge obtained from this study may provide foundation and reference for future design of the coating materials for implantable materials. [ABSTRACT FROM AUTHOR]

With the development of urbanization, urban system has become the center of human habitation, business activities and economic growth in the world. With the influx of daring population into the city, human activities in the city will become more frequent, and the problems of environmental pollution and resource depletion will affect the sustainable development of the city. Therefore, this paper uses emergy theory of eco economic system to analyze the sustainability of urban metabolic process in Shandong province from 2008 to 2018. The results show that the total energy consumption of Shandong Province is gradually increasing from 1.85×1024 sej in 2008 to 3.48×1024 sej in 2018. However, the emergy sustainability indices show that the sustainability of Shandong province is gradually decreasing. This is mainly because the development of Shandong province depends on the development of local resources, which makes the economic development of the cities cause greater pressure on the natural environment.