Search

The stability, reliability, and performance of halide perovskite-based devices depend upon the structure, composition, and particle size of the device-enabling materials. Indeed, the degree of ion mixing in multicomponent perovskite crystals, although challenging to control, is a key factor in determining properties. Herein, an emerging method termed evaporation-crystallization polymer pen lithography (EC-PPL) is used to synthesize and systematically study the degree of ionic mixing of Cs

This article describes the fabrication of single-nanowire strain sensors by thin sectioning of gold films with an ultramicrotome—i.e., “nanoskiving.” The nanowire sensors are transferred to various substrates from the water bath on which they float after sectioning. The electrical response of these single nanowires to mechanical strain is investigated, with the lowest detectable strain determined to be 1.6 × 10−5 with a repeatable response to strains as high as 7 × 10−4. The sensors are shown to have an enhanced sensitivity with a gauge factor of 3.1 on average, but as high as 9.5 in the low strain regime (e ∼ 1 × 10−5). Conventional thin films of gold of the same height as the nanowires are used as controls, and exhibit inferior sensitivity. The practicality of this sensor is investigated by transferring a single nanowire to polyimide tape, and placing the sensor on the wrist to monitor the pulse pressure waveform from the radial artery. The nanowires are fabricated with simple tools and require no lithography. Moreover, the sensors can be “manufactured” efficiently, as each consecutive section of the film is a quasi copy of the previous nanowire. The simple fabrication of these nanowires, along with the compatibility with flexible substrates, offers possibilities in developing new kinds of devices for biomedical applications and structural health monitoring.

This article describes an effect based on the wetting transparency of graphene; the morphology of a metallic film (≤20 nm) when deposited on graphene by evaporation depends strongly on the identity of the substrate supporting the graphene. This control permits the formation of a range of geometries, such as tightly packed nanospheres, nanocrystals, and island-like formations with controllable gaps down to 3 nm. These graphene-supported structures can be transferred to any surface and function as ultrasensitive mechanical signal transducers with high sensitivity and range (at least 4 orders of magnitude of strain) for applications in structural health monitoring, electronic skin, measurement of the contractions of cardiomyocytes, and substrates for surface-enhanced Raman scattering (SERS, including on the tips of optical fibers). These composite films can thus be treated as a platform technology for multimodal sensing. Moreover, they are low profile, mechanically robust, semitransparent and have the potential for reproducible manufacturing over large areas.