Search

The recording performance of a new magnetic tape based on perpendicularly oriented barium ferrite particles was investigated using a 90-nm-wide giant-magnetoresistive reader and a prototype enhanced-field write head. A linear density of 600 kb/in with a postdetection byte-error rate $ was demonstrated based on measured recording data and a software read channel that used a noise-predictive maximum likelihood detection scheme. Using a new iterative decoding architecture, a user bit-error rate of $ can be achieved at this operating point. To facilitate aggressive scaling of the track density, we made several advances in the area of the track-following servo. First, we developed an experimental low-noise tape transport. Second, we implemented an optimized servo channel that together with an experimental timing-based servo pattern enables the generation of position estimates with nanoscale resolution at a high update rate. Third, we developed a field-programmable gate array-based prototyping platform in which we have implemented the servo channel and an $H_{\infty }$ -based track-following controller, enabling real-time closed-loop track-following experiments. Combining these technologies, we achieved a position-error signal (PES) with a standard deviation of 10.3 nm. This magnitude of PES in combination with a 90-nm-wide reader allows the writing and reading of 177-nm-wide tracks at 600 kb/in, for an equivalent areal density of 85.9 Gb/in $^{2}$ . This paper clearly demonstrates the continued scaling potential of tape technologies based on low-cost particulate media.

Carbon-based electronics is a promising alternative to traditional silicon-based electronics as it could enable faster, smaller and cheaper transistors, interconnects and memory devices. However, the development of carbon-based memory devices has been hampered either by the complex fabrication methods of crystalline carbon allotropes or by poor performance. Here we present an oxygenated amorphous carbon (a-COx) produced by physical vapour deposition that has several properties in common with graphite oxide. Moreover, its simple fabrication method ensures excellent reproducibility and tuning of its properties. Memory devices based on a-COx exhibit outstanding non-volatile resistive memory performance, such as switching times on the order of 10 ns and cycling endurance in excess of 10(4) times. A detailed investigation of the pristine, SET and RESET states indicates a switching mechanism based on the electrochemical redox reaction of carbon. These results suggest that a-COx could play a key role in non-volatile memory technology and carbon-based electronics.

Nanoscale memory devices, whose resistance depends on the history of the electric signals applied, could become critical building blocks in new computing paradigms, such as brain-inspired computing and memcomputing. However, there are key challenges to overcome, such as the high programming power required, noise and resistance drift. Here, to address these, we present the concept of a projected memory device, whose distinguishing feature is that the physical mechanism of resistance storage is decoupled from the information-retrieval process. We designed and fabricated projected memory devices based on the phase-change storage mechanism and convincingly demonstrate the concept through detailed experimentation, supported by extensive modelling and finite-element simulations. The projected memory devices exhibit remarkably low drift and excellent noise performance. We also demonstrate active control and customization of the programming characteristics of the device that reliably realize a multitude of resistance states., Nanoscale resistive memory devices could become critical building blocks in emerging brain-inspired computing paradigms. Here, the authors demonstrate such a device—a projected memory cell—based on a phase-change material that decouples resistance storage from the information-retrieval process.

We report on recent advances in micro fabrication technology using micromoulding and high-aspect ratio structuring of photopolymer. The direct application is the realization of components for millimeter-size, ultrasonic piezoelectric motors. A new fabrication process using a thick epoxy-based material (SU-8) and the electroplating of nickel is demonstrated. Photopolymer structures have also been realized and released using a positive tone resist as sacrificial layer. The main advantages over past fabrication methods are better design flexibility, simplicity of the fabrication process, the capability to combine metallic materials (Ni) with polymeric materials (SU-8), and the use of positive tone resist as a sacrificial layer.

After microelectromechanical systems (MEMS) devices have been well established, components of higher complexity are now developed. Particularly, the combination with optical components has been very successful and have led to optical MEMS. The technology of choice for us is the silicon-on-insulator (SOI) technology, which has also been successfully used by other groups. The applications presented here give an overview over what is possible with this technology. In particular, we demonstrate four completely different devices: (a) a 2 /spl times/ 2 optical cross connector (OXC)with an insertion loss of about 0.4 dB at a switching time of 500 /spl mu/s and its extension to a 4 /spl times/ 4 OXC, (b) a variable optical attenuators (VOA), which has an attenuation range of more than 50 dB (c) a Fourier transform spectrometer (FTS) with a spectral resolution of 6 nm in the visible, and (d) an accelerometer with optical readout that achieves a linear dynamic range of 40 dB over /spl plusmn/6 g. Except for the FTS, all the applications utilized optical fibers, which are held and self-aligned within the MEMS component by U-grooves and small leaf springs. All devices show high reliability and a very low power consumption.