Search

Free-piston heat engines are being examined by a number of international research groups as an option for conservative technology, as they are not limited by the movement of the crankshaft as in conventional engines. The free-piston engines are employed in applications like power generation using conventional methods. The higher compression ratios provide higher cycle efficiencies and also boost in-cylinder temperatures increasing mechanical stress, pressures, and heat transfer losses. This paper presents different in-cylinder flows by computational fluid dynamics for various compression ratios ranges from 7 to 15 and estimates were made to find best compression ratio for the optimal engine operating performance and characteristic.

This article deals with existence, uniqueness and Ulam–Hyers–Rassias stability solutions for complex order Hilfer-Katugampola type pantograph equations involving initial and nonlocal condition.

In Diesel engines, where fuel is pumped into highly compressed air towards the end of the compression cycle, knocking is more or less unavoidable. By this time there is already a quantity of fuel in the combustion chamber which will first burn in areas of higher oxygen density before the full charge is combusted. The sudden rise in pressure and temperature produces the distinctive 'knock' or 'clatter' diesel, some of which must be allowed in engine design. The aim of knock control strategies is to try to maximize the trade-off between protecting the engine from damaging knock incidents, and optimizing the output torque of the engine. Knock events are a random process and independent. Knock controllers can't be programmed in a deterministic model. Due to the random nature of arriving knock events, a single time history simulation or experiment of knock control methods cannot provide a repeatable measurement of the controller efficiency. The desired trade-off must therefore be achieved in a stochastic context that could provide an appropriate environment for designing and evaluating the output of various knock control strategies with rigorous statistical properties. Clutching characteristics of a dual fuel diesel engine with direct injection of diesel and a liquid petroleum product in dual fuel mode. The engine is tested for knock reduction by adding Diethyl ether in to the diesel along with Liquid petroleum product. Variation of knocking was plotted with respect to different parameters and the result booted as knocking is minimized by the addition of diethyl ether.

In this note, we consider a nonlinear pantograph equation with Hilfer–Hadamard fractional derivative. We investigate the existence and continuous dependence results by using successive approximations and generalized Gronwall inequality.

This manuscript is devoted to obtain some adequate conditions for existence of at least one solution to fractional pantograph equation (FPE) involving the ψ -fractional derivative. The proposed problem is studied under some boundary conditions. Since stability is an important aspect of the qualitative theory. Therefore, we also discuss the Ulam-Hyers and Ulam-Hyers-Rassias type stabilites for the considered problem. Our results are based on some standard fixed point theorems. For the demonstration of our results, we provide an example.

Here existence and stability results of $\psi$-Hilfer fractional differential equations on time scales is obtained. Here sufficient condition for existence and uniqueness of solution by using Schauder's fixed point theorem (FPT) and Banach FPT is produced. In addition, generalized Ulam stability of the proposed problem is also discussed. problem.

Abstract This manuscript is devoted to an investigation of the existence, uniqueness and stability of random differential equations with ψ-Hilfer fractional derivative. The concerned investigation of existence and uniqueness is obtained via the Schauder fixed point theorem and Banach contraction principle, respectively. Furthermore, for the respective solutions, some results related to different kinds of Ulam type stability including Hyers–Ulam, and generalized Hyers–Ulam, Hyers–Ulam–Rassias are obtained.

In this note, we set up existence, uniqueness as well as the stability of a special class of fractional differential equation (FDE) with Hilfer-Katugampola fractional differential operator (HKFDO). The outcomes are given by employing the Schaefer's fixed point theorem and Banach contraction principle. Moreover, we modify the fractional Ulam stability (FUS) concept utilizing HKFDO.

In this paper, we study the dynamics and stability of thermistor problem for Hilfer fractional type. Classical fixed point theorems are utilized in deriving the results.

Chilli, a globally cultivated and consumed crop is significantly impacted by Thrips parvispinus. The reliance on pesticides could result in residue contamination, adversely affecting quality, leading to export rejections and health risks to consumers. This study evaluated the bioefficacy and persistent toxicity of fipronil and tolfenpyrad against thrips in chilli, and persistence of their residues. Tolfenpyrad demonstrated higher field efficacy (60.94 to 78.53%) against thrips compared to fipronil (37.61 to 58.07%). Residue analysis was performed in leaves and green chilli fruits using LC-MS/MS. Fipronil's efficacy decreased after 5 to 7 days of application, but both fipronil and tolfenpyrad residues remained for 20 and 30 days, respectively. In contrast, the residues in leaves caused persistent toxicity to thrips, causing about 50% mortality until 10 to 15 days in tolfenpyrad treatment. In green chilli, residues of tolfenpyrad and fipronil persisted for up to 40 and 25 days, necessitating pre-harvest intervals of 3.17 and 19.39 to 30.65 days, respectively, but with no dietary risk to consumers. Tolfenpyrad exhibited superior efficacy against T. parvispinus compared to fipronil, with a longer duration of effectiveness in leaves and quicker residue dissipation in chilli fruits and a short pre-harvest interval, supporting its use in Integrated Pest Management., Competing Interests: Declarations. Competing interests: The authors declare no competing interests., (© 2025. The Author(s).)

Following a large-scale radiological event, timely collection of samples from all potentially exposed individuals may be precluded, and high-throughput bioassays capable of rapid and individualized dose assessment several days post-exposure will be essential for population triage and efficient implementation of medical treatment. The objective of this work was to validate the performance of a biomarker panel of radiosensitive intracellular leukocyte proteins (ACTN1, DDB2, and FDXR) and blood cell counts (CD19+ B-cells and CD3+ T-cells) for retrospective classification of exposure and dose estimation up to 7 days post-exposure in an in-vivo C57BL/6 mouse model. Juvenile and adult C57BL/6 mice of both sexes were total body irradiated with 0, 1, 2, 3, or 4 Gy, peripheral blood was collected 1, 4, and 7-days post-exposure, and individual blood biomarkers were quantified by imaging flow cytometry. An ensemble machine learning platform was used to identify the strongest predictor variables and combine them for biodosimetry outputs. This approach generated successful exposure classification (ROC AUC = 0.94, 95% CI: 0.90-0.97) and quantitative dose reconstruction (R 2  = 0.79, RMSE = 0.68 Gy, MAE = 0.53 Gy), supporting the potential utility of the proposed biomarker assay for determining exposure and received dose in an individual., (© 2024. The Author(s).)

There are currently no available FDA-cleared biodosimetry tools for rapid and accurate assessment of absorbed radiation dose following a radiation/nuclear incident. Previously we developed a protein biomarker-based FAST-DOSE bioassay system for biodosimetry. The aim of this study was to integrate an ELISA platform with two high-performing FAST-DOSE biomarkers, BAX and DDB2, and to construct machine learning models that employ a multiparametric biomarker strategy for enhancing the accuracy of exposure classification and radiation dose prediction. The bioassay showed 97.92% and 96% accuracy in classifying samples in human and non-human primate (NHP) blood samples exposed ex vivo to 0-5 Gy X-rays, respectively up to 48 h after exposure, and an adequate correlation between reconstructed and actual dose in the human samples (R 2  = 0.79, RMSE = 0.80 Gy, and MAE = 0.63 Gy) and NHP (R 2  = 0.80, RMSE = 0.78 Gy, and MAE = 0.61 Gy). Biomarker measurements in vivo from four NHPs exposed to a single 2.5 Gy total body dose showed a persistent upregulation in blood samples collected on days 2 and 5 after irradiation. The data indicates that using a combined approach of targeted proteins can increase bioassay sensitivity and provide a more accurate dose prediction., (© 2024. The Author(s).)

Carbon dots (CDs) are an emerging type of carbon nanomaterial with strong biocompatibility, distinct chemical and physical properties, and low toxicity. CDs may emit fluorescence in the ultraviolet (UV) to near-infrared (NIR) range, which renders them beneficial for biomedical applications. CDs are usually made from carbon precursors and can be synthesized using top-down and bottom-up methods and it can be easily functionalized using different methods. For specific cases of biomedical applications carbon dot functionalization augments the materials' characteristics. Novel functionalization techniques are still being investigated. This review will look at the benefits of functionalization to attain a high yield and various biological applications. Biomedical applications such as photodynamic and photothermal therapy, biosensing, bioimaging, and antiviral and antibacterial properties will be covered in this review. The future applications of green synthesized carbon dots will be determined in part by this review., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

In this study, we utilized a navel hybrid material, prepared by fusing fluorescent Carbon Dots SyCDs, derived from syrup bottles, with curcumin. This innovative approach not only offers significant advancements in antimicrobial activity and bioimaging but also represents a stride in sustainable and eco-friendly nanotechnology. The core of our study is the development of an efficient, cost-effective, and environmentally conscious method for synthesizing SyCDs. This is achieved by repurposing waste syrup bottles, thus addressing the pressing issue of plastic waste. The incorporation of curcumin, renowned for its biological properties, enhances the luminescent characteristics of SyCDs and augments their functionality. This combination overcomes the inherent limitations of curcumin when used in isolation. The hybrid material exhibits enhanced antimicrobial properties and proves to be a potent alternative to conventional fluorescent dyes for bioimaging, marking a substantial leap in the field of sustainable nanomaterials. Our work not only demonstrates the versatile applications of luminescent SyCDs in health and environmental science but also underscores the potential of sustainable approaches in addressing global environmental challenges. This study, represents a significant contribution to the domain of sustainable nanotechnology, highlighting the transformative power of integrating waste management with advanced material science., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Luminescent carbon dots have gained significant attention in various fields due to their unique optical properties and potential applications. Here, the study was aimed to propose a novel and sustainable approach for the synthesis of luminescent carbon dots (ICDs) using IV (Intravenous) medical bag waste. The ICDs were synthesized through a facile and cost-effective method that involved the carbonization of IV bag waste followed by surface functionalization with chitosan. The synthesized ICDs were characterized using UV-Visible spectrum (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction analysis (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The size of the ICDs is between 2 and 8 nm. The ICDs effectively inhibited the growth of both gram positive and gram negative bacterial strains with the inhibitory activity in the range of 11-14 mm and 12-18 mm, respectively. Results of antibiofilm activity of ICDs varying concentrations (50 and 100 μg/ml) showed that it effectively distorted the biofilm architecture and thereby validated its promising potentials. In vitro antioxidant activity showed remarkable DPPH radical scavenging potentials of ICDs (33.4%-70.1%). Results of MTT assay revealted that ICDs showed potent cytotoxic effect on HeLa cells in a dose dependant matter (25-400 μg/ml). Furthermore, when HeLa cells were excited at wavelengths of 380 nm, 440 nm and 540 nm, cell-imaging experiments using ICDs revealed the presence of blue, green, and red fluorescence. This innovative method not only addresses the issue of IV bag waste in a sustainable manner but also opens up exciting possibilities for the advancement of versatile carbon-based materials in the field of biomedicine., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Addressing the global challenge of persistent waste through an eco-conscious strategy to transform it into valuable and versatile materials holds great significance in today's swiftly evolving world. By adopting a sustainable approach, we can repurpose waste syringes composed of polytetrafluoroethylene (PTFE) into fluorescent carbon dots (CDs) using a simple hydrothermal process. This research harnessed hyaluronic acid to carbonize and modify discarded plastic syringes, resulting in the creation of luminescent syringe carbon dots (SCDs). Rigorous analysis employing diverse techniques delved into their optical attributes, size distribution, and surface characteristics. Extensive biocompatibility assessments using established assay methods confirmed the safety of the derived SCDs, unveiling their potential antibacterial and antifungal traits. Additionally, a confocal microscope was employed to evaluate the cellular imaging capabilities of SCDs on HeLa cells. Notably, at bactericidal concentrations, SCDs exhibited mild cytotoxicity towards mammalian cells, showcasing cell viability surpassing 91.07% at 1 mg/mL. This pioneering exploration paves the way for potential applications of SCD-based nano-bactericides across various biomedical domains. The initial outcomes established herein mark a significant stride towards the creation of cost-effective and ecologically sound fluorescent probes for biomedical imaging, aimed at combating microbial infections. By ingeniously reutilizing polyethylene terephthalate (PET), this investigation offers a sustainable remedy to address the ecological predicaments linked with plastic waste. In doing so, it charts a course towards contributing to the development of affordable, eco-friendly solutions, heralding a promising prospect for a cleaner, healthier environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

We report the synthesis and characterization of a new water-soluble cavitand 1 . The container features 2-aminobenzimidazole panels at the "rim" and pyridiniums at the "feet". In the solid state, a single-crystal X-ray structure of the organic-soluble precursor 2 showed a stable vase form. The structure is stabilized by hydrogen-bonded bridges between adjacent panels through solvents and ions. In aqueous solution, binding of hydrophobic and amphiphilic guest molecules to 1 was investigated using 1 H NMR. Alkanes, alcohols, acids, diols, and diacids formed 1:1 host-guest complexes, and the guest conformations were deduced from characteristic chemical shift changes. In the presence of [Pd(ethylenediamine)(H 2 O) 2 ·2NO 3 ], cavitand 1 formed a complex incorporating two metals. The metal-coordinated cavitand also bound hydrophobic linear alkanes and difluorobenzene isomers in aqueous medium. The metallo-cavitand showed shape and size selectivity and was used to separate o -difluorobenzene from its isomers as observed by 19 F NMR spectroscopy. The primary amino function of the cavitands offers possibilities for further elaboration to covalent clusters of these container compounds.

The design and development of specific recognition and sensing systems for biologically important anionic species has received growing attention in recent years, as they play significant roles in biology, pharmacy, and environmental sciences. Herein, a new supramolecular sensing probe L1 was developed for highly selective differentiation of nucleotides. L1 displayed extremely marked absorption and emission differentiation upon binding with nucleotide homologs of AMP, ADP, and ATP, due to the divergent spatial orientations of guests upon binding, which allowed for a naked-eye colorimetric differentiation for nucleotides. A differentiating mechanism was unambiguously rationalized by using various spectroscopic studies and theoretical calculations. Furthermore, we successfully demonstrated that L1 can be applied to the real-time monitoring of the enzyme-catalyzed phosphorylation/dephosphorylation processes and thus demonstrated an unprecedented visualizable strategy for selectively differentiating the structurally similar nucleotides and real-time monitoring of biological processes via fluorescent and colorimetric changes., Competing Interests: Declaration of Interests The authors declare no competing interests., (Copyright © 2020 The Authors. Published by Elsevier Inc. All rights reserved.)

Occupational heat stress apart from adverse heat-related health consequences also induces DNA damage in workers exposed to high working temperatures. We investigated the association between chronic heat exposures and Micronuclei (MN) frequency in lymphocytes of 120 workers employed in the steel industry. There was a significant increase in the MN-frequency in exposed workers compared to the unexposed workers (X 2  = 47.1; p < 0.0001) . While exposed workers had higher risk of DNA damage (Adj. OR = 23.3, 95% CI 8.0-70.8) compared to the unexposed workers, among the exposed workers, the odds of DNA damage was much higher for the workers exposed to high-heat levels (Adj. OR = 81.4; 95% CI 21.3-310.1) even after adjusting for confounders. For exposed workers, years of exposure to heat also had a significant association with higher induction of MN (Adj. OR = 29.7; 95% CI 2.8-315.5) . Exposures to chronic heat stress is a significant occupational health risk including damages in sub-cellular level, for workers. Developing protective interventions to reduce heat exposures is imperative in the rising temperature scenario to protect millions of workers across the globe., (© 2019 Informa UK Limited, trading as Taylor & Francis Group.)

The radiation is considered as a double edged sword, as its beneficial and detrimental effects have been demonstrated. The potential benefits are being exploited to its maximum by adopting safe handling of radionuclide stipulated by the regulatory agencies. While the occupational workers are monitored by personnel monitoring devices, for general publics, it is not a regular practice. However, it can be achieved by using biomarkers with a potential for the radiation triage and medical management. An ideal biomarker to adopt in those situations should be rapid, specific, sensitive, reproducible, and able to categorize the nature of exposure and could provide a reliable dose estimation irrespective of the time of the exposures. Since cytogenetic markers shown to have many advantages relatively than other markers, the origins of various chromosomal abnormalities induced by ionizing radiations along with dose-response curves generated in the laboratory are presented. Current status of the gold standard dicentric chromosome assay, micronucleus assay, translocation measurement by fluorescence in-situ hybridization and an emerging protein marker the γ-H2AX assay are discussed with our laboratory data. With the wide choice of methods, an appropriate assay can be employed based on the net.

A highly efficient one-pot synthesis of enantiomerically enriched 2-aryl-2,3-dihydroquinolin-4(1H)-ones has been carried out for the first time using per-6-ABCD as a supramolecular host, chiral base catalyst, and a reusable promoter to give the corresponding scaffold with high yield (up to 99%) and enantiomeric excess (up to 99%). The catalyst is recovered and reused without loss in its activity.

A unique, efficient, highly sensitive and selective fluorescent chemosensor for fenitrothion has been reported for the first time using per-6-amino-β-cyclodextrin:Eu(III) complex. Among the various pesticides, the sensitivity response is found to be in the order, fenitrothion>>>quinalphos>methylparathion>parathion>methylparaoxon>paraoxon>fenchlorphos>profenofos>malathion. A detection limit as low as 1 × 10(-12)M for fenitrothion sensing is realized with a 2.4% relative standard deviation (RSD) of three consecutive runs. The per-6-amino-β-cyclodextrin:Eu(III):pesticide complexes and their sensing mechanism are evidenced from emission, NMR, FT-IR, binding constant measurement, Job's plot, ICD spectra, ESI-MS, lifetime measurements and molecular modeling studies. The proposed sensing is a consequence of Absorption Energy Transfer Emission (AETE) process as a result of better encapsulation of fenitrothion inside the cavity of per-6-amino-β-cyclodextrin:Eu(III) complex. The remarkable sensitivity and selectivity of fenitrothion compared to other OPs, is attributed to a more deeper binding and tighter fit of fenitrothion inside the CD cavity, which is evident from binding constant values and molecular modeling studies. This tighter fit ensures the replacement of two coordinating water molecules on Eu(III) ion, which may have contributed to the more selective sensing of fenitrothion., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A simple and efficient route for the synthesis of 5-substituted 1H-tetrazoles catalyzed by CoY zeolite is reported. The salient features of this atom-economical, cost-effective, and high-yield cobalt-catalyzed protocol are aerobic conditions, lower reaction time, and milder reaction conditions without additives. Other advantages include experimental ease of manipulation, safer alternative to hazardous, corrosive, and polluting conventional Lewis acid catalysts, recovery, and reusability with consistent catalytic activity. The results are rationalized by proposing a suitable mechanism.