Search

Purpose For patients with long bone metastases who undergo orthopedic stabilization surgery followed by radiotherapy (RT), it is unclear what extent of hardware coverage by the radiation field is needed for optimal tumor control. Methods and Materials Long bone metastases treated with surgical intervention followed by radiation between August 2011 to May 2019 from a single institution were reviewed. Local recurrence, defined as any in-bone recurrence, was identified by chart review. Accompanying demographic and treatment characteristics were recorded. Statistical analysis to evaluate factors associated with tumor recurrence included univariate analysis, multivariate analysis, and propensity score matching. Results Among 138 patients with 145 long bone metastases undergoing postoperative RT with a median follow-up of 29.5 months, 36 bone metastases experienced a local recurrence. Most patients (92%) were treated with conventional RT and the median delivered dose was 30 Gy (interquarile range, 20-30 Gy). On univariate analysis, whole hardware RT field coverage and higher dose (biologically effective dose 10 ≥39 Gy) were associated with reduced local recurrence (0.44 hazard ratio [HR]; 95% confidence interval [CI], 0.22%-0.86%; P = .017; 0.5 HR; 95% CI, 0.26%-0.96%; P = .038, respectively). Covariates of time from surgery to RT start, histology of primary tumor (categorized as resistant vs sensitive), intramedullary hardware placement, reaming procedure, and margin status did not reach statistical significance. To adjust for confounding effects, we also conducted a propensity score matched analysis which confirmed that whole hardware coverage was statistically associated with a decreased risk of recurrence on the matched dataset (0.24 HR; 95% CI, 0.07%-0.84%; P = .026). Conclusions In this analysis of mostly patients undergoing conventional radiation, coverage of the whole hardware was associated with reduced local recurrence for patients with long bone metastases, consistent with prior reports. Investigation of approaches to further reduce local recurrence, such as preoperative stereotactic radiation, may be warranted.

Purpose Non-melanomatous skin cancer (NMSC) is the single most common cancer in the US. Radiation therapy is an excellent treatment alternative to surgery. High-dose-rate (HDR) brachytherapy and external beam radiotherapy (EBRT) are commonly used radiation treatment modalities but little data is published comparing these modalities. We present our institution's experience and outcomes with these therapeutic options. Material and methods From June 2005 to March 2013, 61 patients were treated with HDR brachytherapy (n = 9), hypofractionated EBRT (n = 30), or standard fractionation EBRT (n = 22) for NMSC. The primary outcome measure was local control at most remote follow-up and secondary outcome measures were overall survival, cosmetic outcome, and toxicity. Univariate analysis was performed to compare outcomes between treatment modalities. Kaplan-Meier analysis and log-rank test were used to compare overall survival. Results Median follow-up was 30 months. The most common histologies were BCC (47%) and SCC (44%); mean patient age was 83.3 years. Local control was 81% and 2-year actuarial overall survival was 89%. There was no statistical difference in local control or overall survival between treatment modalities. There was no statistical difference in cosmetic outcome or toxicity between treatment modalities, although five of six “poor” cosmetic outcomes and the only grade 3 toxic events were found in the standard fractionation EBRT group. Conclusions All modalities investigated represent effective treatments for NMSC and have good cosmetic outcomes and acceptable toxicity profiles. The finding of higher grade toxicity and a greater portion of patients experiencing toxicity among standard fractionation therapy is counter to expectations. There was no statistical significance to the finding and it is not likely to be meaningful.

Implantable and extracorporeal cardiovascular devices are commonly made from titanium (Ti) (e.g. Ti-coated Nitinol stents and mechanical circulatory assist devices). Endothelializing the blood-contacting Ti surfaces of these devices would provide them with an antithrombogenic coating that mimics the native lining of blood vessels and the heart. We evaluated the viability and adherence of peripheral blood-derived porcine endothelial progenitor cells (EPCs), seeded onto thin Ti layers on glass slides under static conditions and after exposure to fluid shear stresses. EPCs attached and grew to confluence on Ti in serum-free medium, without preadsorption of proteins. After attachment to Ti for 15 min, less than 5% of the cells detached at a shear stress of 100 dyne / cm2. Confluent monolayers of EPCs on smooth Ti surfaces (Rq of 10 nm), exposed to 15 or 100 dyne / cm2 for 48 h, aligned and elongated in the direction of flow and produced nitric oxide dependent on the level of shear stress. EPC-coated Ti surfaces had dramatically reduced platelet adhesion when compared to uncoated Ti surfaces. These results indicate that peripheral blood-derived EPCs adhere and function normally on Ti surfaces. Therefore EPCs may be used to seed cardiovascular devices prior to implantation to ameliorate platelet activation and thrombus formation.

Aim: Peripheral blood-derived endothelial cells (pBD-ECs) are an attractive tool for cell therapies and tissue engineering, but have been limited by their low isolation yield. We increase pBD-EC yield via administration of the chemokine receptor type 4 antagonist AMD3100, as well as via a diluted whole blood incubation (DWBI). Materials & Methods: Porcine pBD-ECs were isolated using AMD3100 and DWBI and tested for EC markers, acetylated LDL uptake, growth kinetics, metabolic activity, flow-mediated nitric oxide production and seeded onto titanium tubes implanted into vessels of pigs. Results: DWBI increased the yield of porcine pBD-ECs 6.6-fold, and AMD3100 increased the yield 4.5-fold. AMD3100-mobilized ECs were phenotypically indistinguishable from nonmobilized ECs. In porcine implants, the cells expressed endothelial nitric oxide synthase, reduced thrombin-antithrombin complex systemically and prevented thrombosis. Conclusion: Administration of AMD3100 and the DWBI method both increase pBD-EC yield.

The overall goal of this method is to describe a technique to subject adherent cells to laminar flow conditions and evaluate their response to well quantifiable fluid shear stresses. Our flow chamber design and flow circuit (Fig. 1) contains a transparent viewing region that enables testing of cell adhesion and imaging of cell morphology immediately before flow (Fig. 11A, B), at various time points during flow (Fig. 11C), and after flow (Fig. 11D). These experiments are illustrated with human umbilical cord blood-derived endothelial progenitor cells (EPCs) and porcine EPCs. This method is also applicable to other adherent cell types, e.g. smooth muscle cells (SMCs) or fibroblasts. The chamber and all parts of the circuit are easily sterilized with steam autoclaving. In contrast to other chambers, e.g. microfluidic chambers, large numbers of cells (> 1 million depending on cell size) can be recovered after the flow experiment under sterile conditions for cell culture or other experiments, e.g. DNA or RNA extraction, or immunohistochemistry (Fig. 11E), or scanning electron microscopy. The shear stress can be adjusted by varying the flow rate of the perfusate, the fluid viscosity, or the channel height and width. The latter can reduce fluid volume or cell needs while ensuring that one-dimensional flow is maintained. It is not necessary to measure chamber height between experiments, since the chamber height does not depend on the use of gaskets, which greatly increases the ease of multiple experiments. Furthermore, the circuit design easily enables the collection of perfusate samples for analysis and/or quantification of metabolites secreted by cells under fluid shear stress exposure, e.g. nitric oxide (Fig. 12).

Implantable cardiovascular devices are manufactured from artificial materials (e.g. titanium (Ti), expanded polytetrafluoroethylene), which pose the risk of thromboemboli formation1,2,3. We have developed a method to line the inside surface of Ti tubes with autologous blood-derived human or porcine endothelial progenitor cells (EPCs)4. By implanting Ti tubes containing a confluent layer of porcine EPCs in the inferior vena cava (IVC) of pigs, we tested the improved biocompatibility of the cell-seeded surface in the prothrombotic environment of a large animal model and compared it to unmodified bare metal surfaces5,6,7 (Figure 1). This method can be used to endothelialize devices within minutes of implantation and test their antithrombotic function in vivo. Peripheral blood was obtained from 50 kg Yorkshire swine and its mononuclear cell fraction cultured to isolate EPCs4,8. Ti tubes (9.4 mm ID) were pre-cut into three 4.5 cm longitudinal sections and reassembled with heat-shrink tubing. A seeding device was built, which allows for slow rotation of the Ti tubes. We performed a laparotomy on the pigs and externalized the intestine and urinary bladder. Sharp and blunt dissection was used to skeletonize the IVC from its bifurcation distal to the right renal artery proximal. The Ti tubes were then filled with fluorescently-labeled autologous EPC suspension and rotated at 10 RPH x 30 min to achieve uniform cell-coating9. After administration of 100 USP/ kg heparin, both ends of the IVC and a lumbar vein were clamped. A 4 cm veinotomy was performed and the device inserted and filled with phosphate-buffered saline. As the veinotomy was closed with a 4-0 Prolene running suture, one clamp was removed to de-air the IVC. At the end of the procedure, the fascia was approximated with 0-PDS (polydioxanone suture), the subcutaneous space closed with 2-0 Vicryl and the skin stapled closed. After 3 - 21 days, pigs were euthanized, the device explanted en-block and fixed. The Ti tubes were disassembled and the inner surfaces imaged with a fluorescent microscope. We found that the bare metal Ti tubes fully occluded whereas the EPC-seeded tubes remained patent. Further, we were able to demonstrate a confluent layer of EPCs on the inside blood-contacting surface. Concluding, our technology can be used to endothelialize Ti tubes within minutes of implantation with autologous EPCs to prevent thrombosis of the device. Our surgical method allows for testing the improved biocompatibility of such modified devices with minimal blood loss and EPC-seeded surface disruption.

Titanium (Ti) is commonly utilized in many cardiovascular devices, e.g. as a component of Nitinol stents, intra- and extracorporeal mechanical circulatory assist devices, but is associated with the risk of thromboemboli formation. We propose to solve this problem by lining the Ti blood-contacting surfaces with autologous peripheral blood-derived late outgrowth endothelial progenitor cells (EPCs) after having previously demonstrated that these EPCs adhere to and grow on Ti under physiological shear stresses and functionally adapt to their environment under flow conditions ex vivo. Autologous fluorescently-labeled porcine EPCs were seeded at the point-of-care in the operating room onto Ti tubes for 30 minutes and implanted into the pro-thrombotic environment of the inferior vena cava of swine (n = 8). After 3 days, Ti tubes were explanted, disassembled, and the blood-contacting surface was imaged. A blinded analysis found all 4 cell-seeded implants to be free of clot, whereas 4 controls without EPCs were either entirely occluded or partially thrombosed. Pre-labeled EPCs had spread and were present on all 4 cell-seeded implants while no endothelial cells were observed on control implants. These results suggest that late outgrowth autologous EPCs represent a promising source of lining Ti implants to reduce thrombosis in vivo.