Search

Formation of high viscous inverse lyotropic liquid crystalline phases in situ upon exposure of low viscous drug-loaded lipid preformulations to synovial fluid provides a promising approach for design of depot formulations for intra-articular drug delivery. Rational formulation design relies on a fundamental understanding of the synovial fluid-mediated dynamic structural transitions occurring at the administration site. At conditions mimicking the in vivo situation, we investigated in real-time such transitions at multiple positions by synchrotron small-angle X-ray scattering (SAXS) combined with an injection-cell. An injectable diclofenac-loaded quaternary preformulation consisting of 72/8/10/10% (w/w) glycerol monooleate/1,2-dioleoyl-glycero-3-phospho-rac-(1-glycerol)/ethanol/water was injected into hyaluronic acid solution or synovial fluid. A fast generation of a coherent drug depot of inverse bicontinuous Im3m and Pn3m cubic phases was observed. Through construction of 2D spatial maps from measurements performed 60 min after injection of the preformulation, it was possible to differentiate liquid crystalline rich- and excess hyaluronic acid solution- or synovial fluid-rich regimes. Synchrotron SAXS findings confirmed that the exposure of the preformulation to the media leads to alterations in structural features in position- and time-dependent manners. Effects of biologically relevant medium composition on the structural features, and implications for development of formulations with sustained drug release properties are highlighted.

Nanoparticles (NPs) are increasingly applied in research and development of new therapies. Characterization of NP systems most often include size, shape, size distribution, and charge but information on the chemical stability of NPs and investigation of the presence of dissolved species is most often missing in efficacy studies due to lack of appropriate methods. In this study, a method based on capillary electrophoresis coupled to inductively coupled plasma mass spectrometry (CE-ICP-MS) was established for analysis of selenium (Se) NPs and dissolved Se species in aqueous media. Peak area and migration time precisions (RSD) of 1.4-3.0% and 1.0-2.6%, respectively, were obtained. CE-ICP-MS analysis of a commercially available SeNP suspension (Q-SeNP) revealed large amounts of selenite corresponding to 32% of the total Se content in the suspension, indicating considerable NP degradation upon storage. The CE-ICP-MS method was modified using a coated fused silica capillary in order to analyze SeNPs in human plasma. Peak area and migration time precisions (RSD) in the range of 3.3-10.7% and 0.8-2.8%, respectively, were achieved. Degradation of polyvinyl alcohol (PVA)-coated SeNPs to selenite in human plasma was demonstrated using the modified method. The amounts of SeNP and selenite were estimated based on a correction factor for the ICP-MS signals of PVA-SeNP and dissolved Se. To the best of our knowledge, this is the first study of SeNPs by CE-ICP-MS and highlights the potential of CE-ICP-MS for quantitative characterization of the behavior of SeNPs in biological media.

Purpose: To evaluate clinical practice in the diagnosis and treatment of progressive keratoconus with corneal crosslinking (CXL) in four Nordic countries. Methods: A questionnaire was sent to all centres at which keratoconus patients are evaluated and CXL is performed in Sweden, Denmark, Norway and Iceland. Nineteen of 20 centres participated. Results: CXL is performed approximately 1300 times per year in these four Nordic countries with a population of around 21.7 million (2019). In most cases, progression is evaluated using the Pentacam HR, and the maximum keratometry reading (Kmax) is considered the most important parameter. The most frequently used treatment protocol in Scandinavia is the 9 mW/cm2 epi-off protocol, using hydroxylpropyl methylcellulose riboflavin (HPMC-riboflavin). The participants deemed the following areas to be in most need of improvement: adaptation of the CXL protocol to individual patients (5/19), the development of effective epi-on treatment protocols (4/19), optimal performance of CXL in thin corneas (4/19), improvement of the definition of progression (2/19), and diagnosis of the need for re-treatment (2/19). Conclusions: We concluded that the diagnosis of progressive keratoconus and the diagnostic equipment used are similar. Treatment strategies are also similar but are suitably different to provide an interesting basis for the comparison of treatment outcomes. The high degree of participation in this survey indicates the possibility of future scientific collaboration on CXL focusing on the areas deemed to need improvement. It would also be of interest to evaluate the possibility of creating a Nordic CXL Registry. The high number of CXL treatments performed ensures sufficient statistical power to solve many questions. Such a registry could be an important contribution to evidence-based care and would allow for longitudinal evaluation.

A UV imaging release-testing setup comprising an agarose gel as a model for tumorous tissue was developed. The setup was optimized with respect to agarose concentration (0.5% (w/v)), injection procedure, and temperature control. A repeatable injection protocol was established allowing injection into cavities with well-defined geometries. The effective resolution of the SDi2 UV imaging system is 30–80 µm. The linear range of the imaging system is less than that of typical spectrophotometers. Consequently, non-linear cAMP calibration curves were applied for quantification at 280 nm. The degree of deviation from Beer’s law was affected by the background absorbance of the gel matrix. MATLAB scripts provided hitherto missing flexibility with respect to definition and utilization of quantification zones, contour lines facilitating visualization, and automated, continuous data analysis. Various release patterns were observed for an aqueous solution and in situ forming Pluronic F127 hydrogel and PLGA implants containing cAMP as a model for STING ligands. The UV imaging and MATLAB data analysis setup constituted a significant technical development in terms of visualizing behavior for injectable formulations intended for intra-tumoral delivery, and, thereby, a step toward establishment of a bio-predictive in vitro release-testing method. A UV imaging release-testing setup comprising an agarose gel as a model for tumorous tissue was developed. The setup was optimized with respect to agarose concentration (0.5% (w/v)), injection procedure, and temperature control. A repeatable injection protocol was established allowing injection into cavities with well-defined geometries. The effective resolution of the SDi2 UV imaging system is 30–80 µm. The linear range of the imaging system is less than that of typical spectrophotometers. Consequently, non-linear cAMP calibration curves were applied for quantification at 280 nm. The degree of deviation from Beer’s law was affected by the background absorbance of the gel matrix. MATLAB scripts provided hitherto missing flexibility with respect to definition and utilization of quantification zones, contour lines facilitating visualization, and automated, continuous data analysis. Various release patterns were observed for an aqueous solution and in situ forming Pluronic F127 hydrogel and PLGA implants containing cAMP as a model for STING ligands. The UV imaging and MATLAB data analysis setup constituted a significant technical development in terms of visualizing behavior for injectable formulations intended for intra-tumoral delivery, and, thereby, a step toward establishment of a bio-predictive in vitro release-testing method.

In situ formation of high viscous inverse lyotropic non-lamellar liquid crystalline phases is a promising approach for sustained drug delivery in the joint. The in situ forming process on exposure of two diclofenac-loaded preformulations to aqueous media was characterized with respect to depot size and shape, initial release and structural transitions using UV–Vis imaging and spatially and time-resolved synchrotron small-angle X-ray scattering (SAXS). The preformulations consisted of 10 % (w/w) ethanol, 10 % (w/w) water and a binary lipid mixture of glycerol monooleate (GMO):1,2-dioleoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DOPG) or GMO:medium chain triglycerides (MCT). Upon injection of preformulations into an employed injection-cell containing excess of bio-relevant medium, rapid generation of liquid crystalline depots was observed. UV–Vis images and constructed 2D SAXS maps of the injection-cell showed depots with different shapes and sizes, and features with high nanostructural heterogeneity. More extensive swelling of the GMO:DOPG-based preformulation was observed compared to the GMO:MCT-based preformulation. The UV image analysis found that a higher amount of diclofenac was released in the image area after 20 h from the GMO:MCT depot compared to the GMO:DOPG depot. The injection-cell setup employing UV–Vis imaging and synchrotron SAXS constitutes an attractive approach for evaluating the in situ forming processes of liquid crystalline depots.

In the present study, a method for quantitation of the pharmaceutical peptide oxytocin (OT) and its diselenide-containing analogue (SeOT) in human plasma was developed using gradient elution LC-ICP-MS/MS. Plasma samples were precipitated with acetonitrile containing 1.0% TFA in a volume ratio of 1+3 (sample+precipitation agent) before analysis. Post-column isotope dilution analysis (IDA) was applied for quantitation and was compared with external calibration. Both calibration methods appeared to be fit for purpose regarding figures of merit including linearity, precision, LOD, LOQ and recovery. Analysis of OT and SeOT showed that selenium-based analysis is considerably more sensitive and selective compared to the sulfur-based analysis. Despite the relatively simpler setup of external calibration, IDA can be advantageous because it compensates for instrument drift and changes in organic solvent concentration. The method was applied for a stability study showing the degradation of OT and SeOT in plasma. The degradation of SeOT was faster than the degradation of OT in plasma. Thus, possible stability effects should be considered before replacing a disulfide bridge with a diselenide bridge or introducing a diselenide label in a potential drug. Graphical abstract: [Figure not available: see fulltext.]

UV–vis spectrometry is widely used in the pharmaceutical sciences for compound quantification, alone or in conjunction with separation techniques, due to most drug entities possessing a chromophore absorbing light in the range 190–800 nm. UV dissolution imaging, the scope of this review, generates spatially and temporally resolved absorbance maps by exploiting the UV absorbance of the analyte. This review aims to give an introduction to UV dissolution imaging and its use in the determination of intrinsic dissolution rates and drug release from whole dosage forms. Applications of UV imaging to non-oral formulations have started to emerge and are reviewed together with the possibility of utilizing UV imaging for physical chemical characterisation of drug substances. The benefits of imaging drug diffusion and transport processes are also discussed.

Buccal films containing a pH modifying excipient may be able to increase bioavailability of drugs with pH-dependent solubility such as saquinavir. Access to suitable in vitro drug release testing methods may facilitate buccal formulation development. This study aimed to explore two release testing methods for characterising buccal films and to elucidate the relationship between microenvironmental pH (pHM, i.e. the pH around the swelling films) and saquinavir release. The Franz diffusion cell method was applicable to investigate the effect of hydroxypropyl methylcellulose (HPMC) grade on saquinavir release. Films containing HPMC K3 LV had a faster saquinavir release than films containing HPMC K100 LV. A UV/Vis imaging method was developed to visualise saquinavir release and pHM changes during the initial dissolution. Within 5 min, the pHM decreased from 6.8 to around 5.4 for HPMC K100 LV-based films containing 11.1 % or 16.6 % (w/w) malic acid. Subsequently, the pHM increased due to increasing concentrations of saquinavir. An increase in malic acid content led to a faster saquinavir release. The combination of methods may be broadly applicable for excipient screening in development of buccal formulations. The imaging approach holds promise for characterizing other pH modifying formulation principles.

In situ forming implants are exposed to an extracellular matrix resembling a gel rather than aqueous solution upon subcutaneous administration. The aim of study was to develop a gel-based release testing system for characterizing the long-term in vitro behavior of in situ forming implants. The gel-based system consisted of an agarose gel mimicking the subcutaneous injection site and a receiver layer comprising phosphate buffer. Poly(D,L-lactide-co-glycolide) in situ forming implants containing leuprolide acetate as the model peptide and N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide (DMSO) or triacetin as co-solvent were investigated. The gel-based release testing system discriminated between the formulations. Accelerated release data obtained at elevated temperatures were able to predict real-time release applying the Arrhenius equation. Monitoring of the microenvironmental pH of the implants was performed by UV–Vis imaging in the gel-based system at 50 °C. A pH drop (from pH 7.4 to 6.7 for the NMP and DMSO implants, to pH 5.5 for the triacetin implants) within the first day was observed, followed by an increase to pH ∼7.4. The gel-based system coupled with UV imaging offered opportunity for detailed evaluation and prediction of the in vitro performance of long-acting injectables, facilitating future development of in situ depot forming delivery systems.

The purpose of this study was to investigate whole-dosage form UV-vis imaging as a potential tool for functional characterization of excipients used in solid oral dosage forms. To this end, tablets (average mass 260.0 mg, 224.5 mg and 222.1 mg) containing theophylline anhydrate (20 % w/w), 1% (w/w) magnesium stearate, and 79 % (w/w) of either microcrystalline cellulose (MCC, Avicel PH 101) or hydroxypropyl methylcellulose (HPMC, Methocel K15 M or K100 M) were prepared as model systems. Drug liberation from tablets was studied in 0.01 M HCl at 37 degrees C using a Sirius SDi2 equipped with a USP IV type flow cell comprising a UV-vis imaging detector operating at 255 nm and 520 nm. The effluent from the flow cell was passed through a downstream spectrophotometer, and UV-vis spectra in the wavelength range 200-800 nm were recorded every 2 min. The erosion and swelling behavior of the MCC tablets and HPMC K15 M and K100 M tablets were visualized in real time. The swelling of HPMC K15 M and K100 M containing tablets was assessed quantitatively as changes in tablet diameter measured at 520 nm, and was clearly distinguished from the swelling of the MCC tablets. Namely, an increment of 2.5 mm in diameter was determined for the HPMC tablets while the MCC tablets increased by 0.5-1 mm in diameter. Gel layers of variable thickness were observed only for the HPMC K15 M and K100 M tablets. In addition, a relatively high initial liberation rate of theophylline was found for the MCC tablets as compared to the HPMC tablets. UV-vis imaging revealed features of liberation not revealed by simply measuring drug concentration in the dissolution media or by visual assessment. It may be sufficiently sensitive to be further developed for functional characterization of excipients and provide insights into drug-excipient interactions likely to be useful in formulation development. (C) 2020 Elsevier B.V. All rights reserved.

Elucidating the impact of excipient variability on oral product performance in a biopharmaceutical perspective would be beneficial and allow excipient implementation on Quality by Design (QbD) approaches. The current study investigated the impact of varying viscosity of binders (hypromellose (HPMC)) and superdisintegrants (sodium starch glycolate (SSG)) and particle size distribution of lubricants (magnesium stearate (MgSt)) on the in vitro dissolution of a highly and a poorly soluble drug from immediate release formulations. Compendial (pharmacopoeia buffers) and biorelevant (media simulating the gastrointestinal fluids) media and the USP 2 and USP 4 apparatuses were used to assess the exerted excipient effects on drug dissolution. Real-time dissolution UV imaging provided mechanistic insights into disintegration and dissolution of the immediate release formulations. Varying the viscosity type of HPMC or SSG did not significantly affect drug dissolution irrespective of the compound used. Faster drug dissolution was observed when decreasing the particle size of MgSt for the highly soluble drug. The use of real-time dissolution UV Imaging revealed the influential role of excipient variability on tablet disintegration, as for the highly soluble drug, tablets containing high viscosity HPMC or low particle size MgSt disintegrated faster as compared to the control tablets while for the poorly soluble drug, slower tablet disintegration was observed when increasing the viscosity of the HPMC as compared to the control tablets. Changes in drug dissolution when varying excipients may be anticipated if the excipient change has previously affected drug solubility. The use of multivariate data analysis revealed the influential biopharmaceutical factors such as critical excipient types/properties, drug aqueous solubility, medium/hydrodynamic characteristics affecting the impact of excipient variability on in vitro drug dissolution.

This work reports a novel approach to the assessment of the surface properties of compacts used in Surface Dissolution Imaging (SDI). SDI is useful for determining intrinsic dissolution rate (IDR), an important parameter in early stage drug development. Surface topography, post-compaction and post-SDI run, have been measured using a non-contact, optical, three-dimensional microscope based on focus variation, the Alicona Infinite Focus Microscope, with the aim of correlating the IDRs to the surface properties. Ibuprofen (IBU) was used as a model poorly-soluble drug. DSC and XRD were used to monitor possible polymorphic changes that may have occurred post-compaction and post-SDI run. IBUs IDR decreased from 0.033 mg/min/cm2 to 0.022 mg/min/cm2 from 10 to 20 min, respectively, during the experiment. XRD and DSC showed no form changes during the SDI run. The surface topography images showed that a distinct imprint was embossed on the surfaces of some compacts which could affect IDRs. Surface parameter values were associated with the SDI experiments which showed strong correlations with the IDR values. The variable-focus microscope can be used as a complimentary tool in the determination of IDR values from the SDI.

The pur­pose of this study was to con­duct an in­ter­lab­o­ra­tory ring-study, with six part­ners (aca­d­e­mic and in­dus­trial), in­ves­ti­gat­ing the mea­sure­ment of in­trin­sic dis­so­lu­tion rate (IDR) us­ing sur­face dis­so­lu­tion imag­ing (SDI) equip­ment. Mea­sure­ment of IDR is im­por­tant in phar­ma­ceu­ti­cal re­search as it pro­vides char­ac­ter­is­ing in­for­ma­tion on drugs and their for­mu­la­tions. This work al­lowed us to as­sess the SDI’s in­ter­lab­o­ra­tory per­for­mance for mea­sur­ing IDR us­ing a de­fined stan­dard op­er­at­ing pro­ce­dure (see sup­port­ing in­for­ma­tion) and six drugs as­signed as low (tadalafil, bromocrip­tine me­sy­late), medium (carvedilol, in­domethacin) and high (ibupro­fen, val­sar­tan) sol­u­bil­ity com­pounds. Fasted State Sim­u­lated In­testi­nal Fluid (FaS­SIF) and blank FaS­SIF (with­out sodium tau­ro­cholate and lecithin) (pH 6.5) were used as me­dia. Us­ing the stan­dard­ised pro­to­col an IDR value was ob­tained for all com­pounds and the re­sults show that the over­all IDR rank or­der matched the sol­u­bil­ity rank or­der. In­ter­lab­o­ra­tory vari­abil­ity was also ex­am­ined and it was ob­served that the vari­abil­ity for lower sol­u­bil­ity com­pounds was higher, co­ef­fi­cient of vari­a­tion >50%, than for in­ter­me­di­ate and high sol­u­bil­ity com­pounds, with the ex­cep­tion of in­domethacin in FaS­SIF medium. In­ter lab­o­ra­tory vari­abil­ity is a use­ful de­scrip­tor for un­der­stand­ing the ro­bust­ness of the pro­to­col and the sys­tem vari­abil­ity. On com­par­i­son to an­other pub­lished small-scale IDR study the rank or­der­ing with re­spect to dis­so­lu­tion rate is iden­ti­cal ex­cept for the high sol­u­bil­ity com­pounds. This re­sults in­di­cates that the SDI ro­bustly mea­sures IDR how­ever, no rec­om­men­da­tion on the use of one small scale method over the other is made.

Protein-protein and peptide-peptide (self-)interactions are of key importance in understanding the physiochemical behavior of proteins and peptides in solution. However, due to the small size of peptide molecules, characterization of these interactions is more challenging than for proteins. In this work, we show that protein-protein and peptide-peptide interactions can advantageously be investigated by measurement of the diffusion coefficient using Taylor Dispersion Analysis. Through comparison to Dynamic Light Scattering it was shown that Taylor Dispersion Analysis is well suited for the characterization of protein-protein interactions of solutions of α-lactalbumin and human serum albumin. The peptide-peptide interactions of three selected peptides were then investigated in a concentration range spanning from 0.5mg/ml up to 80mg/ml using Taylor Dispersion Analysis. The peptide-peptide interactions determination indicated that multibody interactions significantly affect the PPIs at concentration levels above 25mg/ml for the two charged peptides. Relative viscosity measurements, performed using the capillary based setup applied for Taylor Dispersion Analysis, showed that the viscosity of the peptide solutions increased with concentration. Our results indicate that a viscosity difference between run buffer and sample in Taylor Dispersion Analysis may result in overestimation of the measured diffusion coefficient. Thus, Taylor Dispersion Analysis provides a practical, but as yet primarily qualitative, approach to assessment of the colloidal stability of both peptide and protein formulations.

The purpose of this study was to characterize compact surfaces (surface roughness) and study its potential importance to the intrinsic dissolution rate (IDR) as determined by dissolution imaging. To this end, the effect of varying compaction pressures and the use of two stainless-steel surfaces with different textures/roughness on the intrinsic dissolution were investigated. Ketoprofen (KET), paracetamol (PAR) and ibuprofen (IBU) were compacted and a focus variation microscope used to determine the surface topology of the compacts. IDR determination was conducted using a surface dissolution imaging apparatus with the flow-through set up in phosphate buffer at pH 7.2 and at 37 °C. The results indicated a general decrease in the surface area of the drug compacts with an increase in compaction force (p values < 0.05 for IBU and PAR but not KET). This change in surface area was measured using the Sdr parameter, which can be defined as the developed interfacial area. The smoother stainless-steel plate insert produced significantly smoother compacts for KET (Sdr decreased from 0.30% to 0.07%). However, PAR and IBU compacts showed an increase in their Sdr values from 3.94% to 17.90% and from 0.60% to 0.83%, respectively, suggesting the changes in surface properties to be drug specific relating to poor compaction properties and elasticity. The dissolution studies suggested that low compaction forces were not suitable for PAR. Overall changes in the surface topology did not have a significant effect on the obtained IDR values.

Therapeutic proteins and peptides are mainly administrated by subcutaneous injection. In vitro release testing of subcutaneous injectables performed using methods that take the structure and environment of the subcutaneous tissue into account may improve predictability of the in vivo behavior and thereby facilitate establishment of in vitro in vivo correlations. The aim of the study was to develop a biopredictive flow-through in vitro release method with a gel-type matrix for subcutaneously administered formulations and to explore the possibility of establishing a level A in vitro in vivo correlation for selected insulin products. A novel gel-based flow-through method with the incorporation of an injection step was used to assess selected commercial insulin formulations with different duration of action (Actrapid®, Mixtard® 30, Insulatard®, Lantus®). The in vitro release method provided the correct rank ordering in relation to the in vivo performance. For the modified release insulins Insulatard® and Lantus®, an in vitro in vivo correlation using non-linear time scaling was established based on the in vitro release data and in vivo subcutaneous absorption data of the 125I-labeled insulins taken from literature. Predicted absorption profiles were constructed using the in vitro in vivo correlation and subsequently converted into simulated plasma profiles. The approach taken may be of wider utility in characterizing injectables for subcutaneous administration.

Cisplatin ( cis-diamminedichloroplatinum(II)) is among the most potent cytotoxic agents used in cancer chemotherapy. The encapsulation of cisplatin in lipid-based drug carriers has been challenging owing to its low solubility in both aqueous and lipid phases. Here, we investigated cisplatin encapsulation in nonlamellar liquid-crystalline (LC) nanodispersions formed from a ternary mixture of phytantriol (PHYT), vitamin E (Vit E), and an anionic phospholipid [either phosphatidylglycerol (DSPG) or phosphatidylserine (DPPS)]. We show an increase in cisplatin encapsulation efficiency (EE) in nanodispersions containing 1.5-4 wt % phospholipid. The EE was highest in DPPS-containing nanodispersions (53-98%) compared to DSPG-containing counterparts (25-40%) under similar experimental conditions. Through structural and morphological characterizations involving synchrotron small-angle X-ray scattering and cryogenic transmission electron microscopy, we further show that varying the phospholipid content of cisplatin-free nanodispersions triggers an internal phase transition from a neat hexagonal (H

Evaluation of drug precipitation is important in order to address challenges regarding low and variable bioavailability of poorly water-soluble drugs, to assess potential risk of patient safety with infusion therapy, and to explore injectable in situ suspension-forming drug delivery systems. Generally, drug precipitation is assessed in vitro through solution concentration analysis methods. Dual-wavelength UV-vis imaging is a novel imaging technique that may provide an opportunity for simultaneously monitoring changes in both solution and solid phases during precipitation. In the present study, a multimodal approach integrating UV-vis imaging, light microscopy, and Raman spectroscopy was developed for characterization of piroxicam supersaturation, precipitation, and dissolution in a flow-through setup. A solution of piroxicam dissolved in 1-methyl-2-pyrrolidinone was injected into a flowing aqueous environment (pH 7.4), causing piroxicam to precipitate. Imaging at 405 and 280 nm monitored piroxicam concentration distributions during precipitation and revealed different supersaturation levels dependent on the initial concentration of the piroxicam solution. The combination with imaging at 525 nm, light microscopy, and Raman spectroscopy measurements demonstrated concentration-dependent precipitation and the formation, growth, and dissolution of individual particles. Results emphasize the importance of the specific hydrodynamic conditions on the piroxicam precipitation. The approach used may facilitate comprehensive understanding of drug precipitation and dissolution processes and may be developed further into a basic tool for formulation screening and development.

An analytical method based on capillary electrophoresis (CE) and inductively coupled plasma mass spectrometry (ICP-MS) detection was developed for studies on the interaction of gold-containing drugs and plasma proteins using auranofin as example. A detection limit of 18 ng/mL of auranofin corresponding to 5.2 ng/mL Au and a precision of 1.5 % were obtained. Kinetic studies of the interaction between auranofin and protein were performed by incubation in aqueous solutions as well as 20 % human plasma at 37 °C. The reaction of auranofin with human serum albumin (HSA) and plasma proceeded fast; 50 % of un-bound auranofin disappeared within 2 and 3 min, respectively. By blocking the free cysteine (Cys-34) by iodoacetamide on HSA, it was shown that Cys-34 was the main reaction site for auranofin. By selective labeling of HSA present in 20 % human plasma with iophenoxate, it was demonstrated that HSA was the major auranofin-interacting protein in plasma. The CE-ICP-MS method is proposed as a novel approach for kinetic studies of the interactions between gold-based drugs and plasma proteins. Graphical Abstract Development of a CE-ICP-MS based method allows for studies on interaction of the gold containing drug auranofin with plasma proteins.

UV imaging provides spatially and temporally resolved absorbance measurements, which are highly useful in pharmaceutical analysis. Commercial UV imaging instrumentation was originally developed as a detector for separation sciences, but the main use is in the area of in vitro dissolution and release testing studies. The review covers the basic principles of the technology and summarizes the main applications in relation to intrinsic dissolution rate determination, excipient compatibility studies and in vitro release characterization of drug substances and vehicles intended for parenteral administration. UV imaging has potential for providing new insights to drug dissolution and release processes in formulation development by real-time monitoring of swelling, precipitation, diffusion and partitioning phenomena. Limitations of current instrumentation are discussed and a perspective to new developments and opportunities given as new instrumentation is emerging.

Human serum albumin (HSA) is the most abundant protein in the human plasma. HSA has several physiological roles in the human body, including storage and transport. Owing to the predominance of albumin in plasma, HSA is often involved in the protein binding of drugs. The aim of this work was to develop a selective, quantitative method for determining albumin in plasma with the purpose of clarifying the fate of metal-based drugs in biological systems. The method can also be applied for determination of urine albumin, which is of relevance in diagnostics of kidney disease. A selective method for quantification of HSA based on labelling the protein with iophenoxic acid (IPA) was developed. Samples were subjected to size exclusion chromatography (SEC) and detection by inductively coupled plasma mass spectrometry (ICP-MS) monitoring iodine and platinum. The iodine signal for the HSA-IPA complex showed linearity in the range 1 to 250 mg L(-1). The precision was 3.7% and the accuracy 100.7% determined by analysis of a certified HSA reference material. The limit of detection (LOD) and limit of quantification (LOQ) were 0.23 and 9.79 mg L(-1), respectively. The method was applied for analysis of HSA in human plasma and urine samples and for studying the binding of cisplatin to proteins in the human plasma.

In the present study, the impact on peptide properties of labelling peptides with the fluorophore TAMRA or the selenium (Se) containing amino acid SeMet was evaluated. Three differently labelled variants of the cell-penetrating peptide (CPP) penetratin (Pen) were synthesized, PenM(Se), TAMRA-PenM(Se) and TAMRA-Pen. The labelled peptides were characterized in terms of hydrodynamic radius, secondary structure during peptide-membrane interaction, effect on membrane leakage induction, uptake efficiency in HeLa cells. Furthermore, stability of peptides and identities of degradation products in cell media and cell lysate were evaluated. TAMRA-labelling increased the hydrodynamic radius of Pen and PenM(Se) significantly. Labelling with Se caused no or minimal changes in size, secondary structure and membrane leakage induction in concentration levels relevant for cellular uptake studies. Similar degradation patterns of all labelled peptides were observed in HBSS media; degradation was mainly due to oxidation. Cellular uptake was significantly higher for the TAMRA labelled peptides as compared to Se-labelled Pen. Extensive degradation was observed in media during cellular uptake studies, however, in all cell lysates, primarily the intact peptide (PenM(Se), TAMRA-PenM(Se) or TAMRA-Pen) was observed. Selenium labelling caused minimal alteration of the physicochemical properties of the peptide and allowed for absolute quantitative determination of cellular uptake by inductively coupled plasma mass spectrometry. Selenium is thus proposed as a promising alternative label for quantification of peptides in general, altering the properties of the peptide to a minor extent as compared to commonly used peptide labels.

Rapid and sensitive quantification of protein based biomarkers and drugs is a substantial challenge in diagnostics and biopharmaceutical drug development. Current technologies, such as ELISA, are characterized by being slow (hours), requiring relatively large amounts of sample and being subject to cumbersome and expensive assay development. In this work a new approach for quantification based on changes in diffusivity is presented. The apparent diffusivity of an indicator molecule interacting with the protein of interest is determined by Taylor Dispersion Analysis (TDA) in a hydrodynamic flow system. In the presence of the analyte the apparent diffusivity of the indicator changes due to complexation. This change in diffusivity is used to quantify the analyte. This approach, termed Flow Induced Dispersion Analysis (FIDA), is characterized by being fast (minutes), selective (quantification is possible in a blood plasma matrix), fully automated, and being subject to a simple assay development. FIDA is demonstrated for quantification of the protein Human Serum Albumin (HSA) in human plasma as well as for quantification of an antibody against HSA. The sensitivity of the FIDA assay depends on the indicator-analyte dissociation constant which in favourable cases is in the sub-nanomolar to picomolar range for antibody-antigen interactions.

Self-Nanoemulsifying Drug Delivery Systems (SNEDDSs) were developed using well-defined excipients with the objective of mimicking digested SNEDDSs without the use of enzymes and in vitro lipolysis models and thereby enabling studies of the morphology and size of nanoemulsions as well as digested nanoemulsions by Cryo-TEM imaging and Dynamic Light Scattering. Four SNEDDSs (I-IV) were developed. Going from SNEDDS I to IV lipid content and solubility of the model drug cinnarizine decreased, which was also the case for dispersion time and droplet size. Droplet size of all SNEDDS was evaluated at 1% (w/w) dispersion under different conditions. Cinnarizine incorporation increased the droplet size of SNEDDSs I and II whereas for SNEDDSs III and IV no difference was observed. At low pH cinnarizine had no effect on droplet size, probably due to increased aqueous solubility and partitioning into the aqueous phase. Dispersion of the SNEDDSs in Simulated Intestinal Media (SIM) containing bile salts and phospholipids resulted in a decrease in droplet size for all SNEDDS, as compared to dispersion in buffer. Increasing the bile salt/phospholipid content in the SIM decreased the droplet sizes further. Mimicked digested SNEDDS with highest lipid content (I and II) formed smaller nanoemulsion droplet sizes upon dispersion in SIM, whereas droplet size from III and IV were virtually unchanged by digestion. Increasing the bile acid/phosphatidylcholine content in the SIM generally decreased droplet size, due to the solubilizing power of the endogenous surfactants. Digestion of SNEDDSs II resulted in formation of vesicles or micelles in fasted and fed state SIM, respectively. The developed and characterized SNEDDS provide for a better knowledge of the colloid phases generated during digestion of SNEDDS and therefore will enable studies that may yield a more detailed understanding of SNEDDS performance.

A capillary electrophoresis inductively coupled plasma mass spectrometry method for separation of free cisplatin from liposome-encapsulated cisplatin and protein-bound cisplatin was developed. A liposomal formulation of cisplatin based on PEGylated liposomes was used as model drug formulation. The effect of human plasma matrix on the analysis of liposome-encapsulated cisplatin and intact cisplatin was studied. The presence of 1 % of dextran and 4 mM of sodium dodecyl sulfate in HEPES buffer was demonstrated to be effective in improving the separation of liposomes and cisplatin bound to proteins in plasma. A detection limit of 41 ng/mL of platinum and a precision of 2.1 % (for 10 μg/mL of cisplatin standard) were obtained. Simultaneous measurements of phosphorous and platinum allows the simultaneous monitoring of the liposomes, liposome-encapsulated cisplatin, free cisplatin and cisplatin bound to plasma constituents in plasma samples. It was demonstrated that this approach is suitable for studies of the stability of liposome formulations as leakage of active drug from the liposomes and subsequent binding to biomolecules in plasma can be monitored. This methodology has not been reported before and will improve characterization of liposomal drugs during drug development and in studies on kinetics.

A novel real-time UV imaging approach for non-intrusive investigation of the diffusion and partitioning phenomena occurring during piroxicam release from medium chain triglyceride (MCT) solution into two hydrogel matrices is described. Two binary polymer/buffer gel matrices, 0.5% (w/v) agarose and 25% (w/v) Pluronic F127, were applied as simple models mimicking the subcutaneous tissue. The evolution of the absorbance maps as a function of time provided detailed information on the piroxicam release processes upon the exposure of the gel matrices to MCT. Using calibration curves, the concentration maps of piroxicam in the UV imaging area were determined. Regression of the longitudinal concentration-distance profiles, which were obtained using expressions derived from Fick's second law, provided the diffusivity and the distribution coefficients of piroxicam penetrated into the gels. The obtained MCT-agarose (pH 7.4) distribution coefficient of 1.4 was identical to the MCT-aqueous (pH 7.4) distribution coefficient determined by the shake-flask method whereas that of the MCT-Pluronic F127 system was four times less. The experimental data show that UV imaging may have considerable potential for investigating the transport properties of drug formulations intended for the subcutaneous administration.

A capillary electrophoresis-inductively coupled plasma mass spectrometry (CE-ICP-MS) method was developed for separation of the free oxaliplatin drug substance from liposome-entrapped oxaliplatin. Simultaneous determination of phosphorous and platinum opened the possibility to simultaneously monitor the liposomes (phospholipids) and platinum-based drug. In order to suppress the interferences, argon gas was used as a collision gas in ICP-MS. A detection limit of 29 ng/mL of platinum and a precision of 2.9% (for 10 μg/mL of oxaliplatin standard) were obtained. Measurement of the total concentration of free and encapsulated oxaliplatin by CE-ICP-MS was compared with total determination by ICP-MS after microwave digestion and showed a good agreement. A liposomal formulation of oxaliplatin based on PEGylated liposomes was used as a model drug formulation. Studies of accelerated drug release induced by sonication and phospholipase A(2) catalyzed hydrolysis were performed. It was demonstrated that the CE-ICP-MS was an efficient in vitro characterization method in the development and quality assurance purposes of lipsome-based formulation of metallodrugs.

Cu(II) ions are implicated in the pathogenesis of Alzheimer disease by influencing the aggregation of the amyloid-β (Aβ) peptide. Elucidating the underlying Cu(II)-induced Aβ aggregation is paramount for understanding the role of Cu(II) in the pathology of Alzheimer disease. The aim of this study was to characterize the qualitative and quantitative influence of Cu(II) on the extracellular aggregation mechanism and aggregate morphology of Aβ1-40 using spectroscopic, microelectrophoretic, mass spectrometric, and ultrastructural techniques. We found that the Cu(II):Aβ ratio in solution has a major influence on (i) the aggregation kinetics/mechanism of Aβ, because three different kinetic scenarios were observed depending on the Cu(II):Aβ ratio, (ii) the metal:peptide stoichiometry in the aggregates, which increased to 1.4 at supra-equimolar Cu(II):Aβ ratio; and (iii) the morphology of the aggregates, which shifted from fibrillar to non-fibrillar at increasing Cu(II):Aβ ratios. We observed dynamic morphological changes of the aggregates, and that the formation of spherical aggregates appeared to be a common morphological end point independent on the Cu(II) concentration. Experiments with Aβ1-42 were compatible with the conclusions for Aβ1-40 even though the low solubility of Aβ1-42 precluded examination under the same conditions as for the Aβ1-40. Experiments with Aβ1-16 and Aβ1-28 showed that other parts than the Cu(II)-binding His residues were important for Cu(II)-induced Aβ aggregation. Based on this study we propose three mechanistic models for the Cu(II)-induced aggregation of Aβ1-40 depending on the Cu(II):Aβ ratio, and identify key reaction steps that may be feasible targets for preventing Cu(II)-associated aggregation or toxicity in Alzheimer disease. © 2011 by The American Society for Biochemistry and Molecular Biology, Inc.

Development of suitable in vitro release models for formulation development as well as quality control purposes has to be initiated in the early design phase of injectable depots. Optimally, construction of an in vitro release model may lead to the establishment of in vitro in vivo correlations. By using a model compound (sodium diatrizoate, DTZ), the purpose of this study was to investigate the possibility of establishing in vitro in vivo relations between the DTZ disappearance profile obtained from the donor compartment of the rotating dialysis cell model and the joint disappearance profile following intra-articular administration. In vitro experiments were conducted by applying solutions of DTZ to the donor compartment. In the in vivo experiments, five horses were subjected to both intravenous and intra-articular administration of an aqueous solution of 3.9 mg DTZ/kg. A strong relation (R2 = 0.99) was obtained between the disappearance data from the donor compartment of the in vitro model and the disappearance data from the synovial fluid after intra-articular administration of DTZ. Furthermore, a relation (R2 = 0.91) between the appearance data obtained from the acceptor compartment and the deconvolved appearance serum data upon intra-articular administration of DTZ was obtained. The correlations obtained in this study hold promise that the rotating dialysis cell model has a role in the prediction of the intra-articular fate of drugs injected as solutions.

The interaction between an intact protein and two lipophilic ions at an oil-water interface has been investigated using cyclic voltammetry, impedance based techniques and a newly developed method in which the biphasic oil-water system is analyzed by biphasic electrospray ionization mass spectrometry (BESI-MS), using a dual-channel electrospray emitter. It is found that the protein forms interfacial complexes with the lipophilic ions and that it specifically requires the presence of the oil-water interface to be formed under the experimental conditions. Furthermore, impedance based techniques and BESI-MS with a common ion to polarize the interface indicated that the Galvani potential difference across the oil-water interface significantly influences the interfacial complexation degree. The ability to investigate protein-ligand complexes formed at polarized liquid-liquid interfaces is thus a new analytical method for assessing potential dependent interfacial complexation using a structure elucidating detection principle.

The feasibility of capillary electrophoresis frontal analysis for the study of low-molecular-weight ligand- chondroitin sulfate interactions was investigated. The interaction of the 7 cationic ligands (lidocaine, propranolol, scopolamine, N-methyl scopolamine, N-butyl scopolamine, 2-propylisochinolinium, and methyl viologen) with the glycosaminoglycan chondroitin sulfate was investigated in 0.067 M phosphate buffer, pH 7.4, at 25 o C. A frontal analysis method with a short analysis time, suitable for ranking ligands according to degree of complexation for chondroitin sulfate was developed. The double charged ligand methyl viologen possessed the highest affinity for chondroitin sulfate. Linear binding isotherms were obtained and apparent association constants were determined. Capillary electrophoresis frontal analysis may be an attractive tool for characterization of ligand-glycosaminoglycan interactions.