Search

The current evolution of technical and environmental regulations and the recent development of hydrogen mobility require technological breakthroughs in the industrial areas, such as in harbours. Thus, multi-energy microgrids integrating low-carbon energy sources, electrical and hydrogen loads and storage solutions have to be designed. To improve their economic viability, the microgrid components must be carefully sized and the energy must be distributed in the most cost-effective way at any time. So as to foster the expansion of multi-energy microgrids in industrial areas, we propose in this paper a two-level optimization for the energy management and the sizing, applied to an original multi-energy scenario considering electricity and hydrogen as energy vectors. The designed energy management optimization takes into account an objective of economic profitability and constraints related to the availability of the sources and storage solutions, their reliability and the costs. The sizing optimization aims to propose different solutions allowing the benefits to be maximized and the expenses to be minimized. One of the main contributions of the paper is to compare the possible ways of valorisation of the energy available in an industrial microgrid. The results show that the sale of hydrogen allows income to be increased, in addition to self-consumption and sale to the electrical grid, but the electrolyzer involves high investments costs. Finally, a sensitivity analysis is presented and shows that the investment costs of electrolyzer and battery and the hydrogen selling price are key points in the optimal design.

To assess the difference in the fate of the antibiotic colistin (COLI) after its pulmonary delivery as a powder or a solution, we developed a COLI powder and evaluated the COLI pharmacokinetic properties in rats after pulmonary administration of the powder or the solution. The amorphous COLI powder prepared by spray drying was characterized by a mass median aerodynamic diameter and fine particle fraction of 2.68 &plusmn, 0.07 &micro, m and 59.5 &plusmn, 5.4%, respectively, when emitted from a Handihaler&reg, After intratracheal administration, the average pulmonary epithelial lining fluid (ELF): plasma area under the concentration versus time curves (AUC) ratios were 570 and 95 for the COLI solution and powder, respectively. However, the same COLI plasma concentration profiles were obtained with the two formulations. According to our pharmacokinetic model, this difference in ELF COLI concentration could be due to faster systemic absorption of COLI after the powder inhalation than for the solution. In addition, the COLI apparent permeability (Papp) across a Calu-3 epithelium model increased 10-fold when its concentration changed from 100 to 4000 mg/L. Based on this last result, we propose that the difference observed in vivo between the COLI solution and powder could be due to a high local ELF COLI concentration being obtained at the site where the dry particles impact the lung. This high local COLI concentration can lead to a local increase in COLI Papp, which is associated with a high concentration gradient and could produce a high local transfer of COLI across the epithelium and a consequent increase in the overall absorption rate of COLI.

In this work, we report the existence of a stoichiometric regime where the performances of operating polymer electrolyte membrane (PEM) fuel cells are entirely governed by the mass transport in the cathode channels. An analytical model of the fuel cell stoichiometric regime is derived and evidenced experimentally: from the cell spectral signature at low frequency based on electrochemical impedance spectroscopy, and from the current density distribution measured using a segmented current collector. The existence of such regime provides a simple way to characterize, model and predict PEM fuel cell performances.

International audience; The purpose of this study was to design inhalable sustained-release nanoparticle-in-microparticles, i.e. nano-embedded microparticles, for the lung delivery of chloramphenicol or thiamphenicol as aerosols. The palmitate ester prodrugs of the two antibiotics were used to prepare PLGA-based nanoparticles or to form pure prodrug nanoparticles. Prodrug-loaded PLGA nanoparticles or pure prodrug nanoparticles were prepared using the emulsion-solvent evaporation method. Dry microparticle powders for inhalation were then produced by spray-drying the nanoparticle suspensions supplemented with lactose as a bulking agent and L-leucine as a dispersing enhancer. Examined under the scanning electron microscopy, the obtained microparticles appeared to be spherical and shriveled, with no crystal-like structures. Drug loading was satisfactory (14 to 34% (m/m)) and the aerodynamic properties determined with a Next Generation Impactor were appropriate for lung delivery, with mass median aerodynamic diameters close to 3 μm. The in vitro release profiles showed that sustained released was achieved with these formulations, with an almost complete release over 14 days.

This paper addresses the simulation of complex systems which consider phenomena with different time scales. Such problems are encountered on studies of electrical systems which try to take into account the simulation of the power converter and its control laws, over representative operating cycles of several hours. Moreover, when storage elements are integrated into a power chain, their aging may need the designer to consider larger time scales, which can then exceed a few years. It is the reason why most studies separate the time scales between the slow dynamics for the energetic, thermal and aging phenomena, and the fast ones to study the power converter and its control laws. This paper presents an original cycle-based and multi-rate method for the simulation of power systems with a wide range of time scales and with high mutual dependency between the fast and slow state variables. This method is applied to the supercapacitor energy storage system of a full-electric ferry. The proposed simulation results take into account at the same time the switching of the power converter and the aging of the supercapacitor, with a reduction of the computational effort greater than 1 0 5 . In other words, while a full calculation of the problem takes 10 centuries on a personal computer, the proposed method permits to have the same result in only 15 days.

Proton exchange membrane fuel cell is a well-known technology that has shown high efficiency and performance as a power system compared to conventional sources such as internal combustion engines. Especially, open cathode proton exchange membrane is growing more popular thanks to its simple structure, low cost and low parasitic losses. However, the open cathode fuel cell performance is highly related to the operating temperature variation and the airflow rate which is adjusted through the fan voltage. In this regard, the present study investigates the thermal management of an open cathode proton exchange membrane fuel cell. The objectives are the stack performance improvement and the stack degradation prevention. Indeed, a safety and optimal operating zone governed by the load current, the stack temperature and the air stoichiometry, is designed. This optimal operating zone is defined based on the system thermal balance and the operating constraints. Hence, the proposed control strategy deals concurrently with the stack temperature regulation and the air stoichiometry adjustment to guarantee the goals achievement. The performance of the proposed control strategy is verified through experimental studies with different operating conditions and results prove its efficiency. To properly design an appropriate control strategy, a multiphysic fuel cell model is developed based on acausal approach by mean of Matlab/Simscape and experimentally validated.

International audience; Pulmonary delivery of fluoroquinolones (FQs) is an interesting approach to treat lung infections as it may lead to high local concentrations while minimizing systemic exposure. However, FQs have a rapid diffusion through the lung epithelium giving the pulmonary route no advantage compared to the oral route. Interactions between FQs and metal cations form complexes which limit the diffusion through the epithelial barrier and would reduce the absorption of FQs and maintain high concentrations in the lung. The effects of this complexation depend on the FQ and the metal cations and optimum partners should be selected through in vitro experiments prior to aerosol drug formulation. In this study, CIP was chosen as a representative FQ and 5 cations (Ca2+, Mg2+, Zn2+, Al3+, Cu2+) were selected to study the complexation and its effects on permeability, antimicrobial efficacy and cell toxicity. The results showed that the apparent association constants between CIP and cations ranked with the descending order: Cu2+>Al3+>Zn2+>Mg2+>Ca2+. When a target of 80% complexation was reached with the adequate concentrations of cations, the CIP permeability through the Calu-3 lung epithelial cells was decreased of 50%. Toxicity of the CIP on the Calu-3 cells, with an EC50 evaluated at 7μM, was not significantly affected by the presence of the cations. The minimum inhibitory concentration of CIP for Pseudomonas aeruginosa was not affected or slightly increased in the range of cation concentrations tested, except for Mg2+. In conclusion, permeability was the main parameter that was affected by the metal cation complexation while cell toxicity and antimicrobial activity were not or slightly modified. Cu2+, with the highest apparent constant of association and with no effect on cell toxicity and antimicrobial activity of the CIP, appeared as a promising cation for the development of a controlled-permeability formulation of CIP for lung treatment.

International audience; This paper presents an energy management algorithm to be embedded for a residential application disconnected from the power grid. The multisource system studied includes solar panels as a renewable energy source, a fuel cell as a secondary source, three batteries and a bank of supercapacitors as storage systems. The proposed algorithm uses as input data, future estimates obtained from power consumption and meteorological forecasting data, and historical of the load power and the renewable power obtained from measurements. It is assumed that these two input powers are imposed and uncontrollable. In the case where the future estimates have errors compared to what has actually been measured, a mathematical approach shows that the algorithm is able to compensate these forecasting errors by sharing them between the different sources of the system while respecting their different characteristics. In addition to the optimal energy distribution, the algorithm gives the optimal size of each source and storage devices. In this work, the total cost of the system is chosen as the criteria to be optimized. The simulations are carried out over a year, with a time step of 1 second and in the presence of significant forecasting errors. The results obtained are particularly convincing and make it possible to validate this energy management strategy.

Aerosol antibiotics are an interesting alternative to oral or intravenous therapy in Cystic Fibrosis lung infections. Levofloxacin (LVX) inhaled solution is already an effective option. In this study, the aim was the development of LVX-loaded PLGA microspheres (MS) for pulmonary administration as a dry powder. MS were prepared, for the first time, by a modified double emulsion solvent evaporation method with premix membrane homogenization. Aqueous phases were saturated with LVX and a fatty acid (lauric acid) was added to avoid the drug escaping from the organic phase. MS were characterized in terms of size, drug content, morphology and in vitro release properties. X-ray diffraction, Fourier-transform infrared spectroscopy, differential and gravimetric thermal analysis, and cytotoxicity analyses were performed. Results showed this new method increased the drug loading while maintaining an adequate (∼5 µm) particle size and controlled release. Compared to a solution for inhalation, these properties combined with the dry-powder nature of these MS will improve patient compliance. The incorporation of lauric acid was not advantageous because the particle size was higher and no improvements concerning the sustained release occurred. LVX was molecularly dispersed in the matrix, or it was in amorphous state, as confirmed by the physico-chemical analyses. Calu-3 cell viability assays demonstrated no cytotoxicity for these MS, making them a promising system for LVX pulmonary delivery.

International audience; This article elaborates a techno-economic approach that aims to optimize the conversion and energy storage unit chain of the first quick charge plug-in ferry. The choice of supercapacitors is motivated and then compared to other energy storage units for different kind of ferry exploitation. Several models were developed to be coupled with a global techno-economic model considering an exploitation strategy. In the last part, a typical application illustrates the cost reduction compared to the standard sizing approach.

This paper proposes a simple and effective method to reduce speed ripples of permanent magnet synchronous machines (PMSMs) under low-speed working conditions. The treated issue is related to the periodic torque ripples, which induce speed oscillations that deteriorate the drive performance. The main idea of the proposed method is to modify a conventional PMSM controller by superposing an appropriate compensation signal to the quadratic-current reference. The proposed approach allows the reduction of speed ripples at low speed through a simple compensation signal and does not require a hard calculation cost. A theoretical analysis is presented, and both simulation and experimental results are presented to validate the proposed compensation method.

A rifampicin-hydroxypropyl-beta-cyclodextrin (RIF-HPCD) complex solution and two RIF-loaded PLGA microspheres with slow or fast release rates were nebulized into the rat lungs for a comparative biopharmaceutical evaluation. A pharmacokinetic model was applied to model systemic RIF concentrations and to predict the RIF concentrations in the lung epithelial lining fluid (ELF). With intravenous RIF and nebulized RIF-HPCD, plasma profiles and predicted RIF ELF profiles were superimposed indicating that RIF diffused almost instantaneously through the broncho-alveolar barrier. 5h post administration RIF ELF predicted concentrations were in agreement with experimental concentrations determined using the broncho-alveolar lavage (BAL) sampling method. Microsphere formulations resulted in different plasma concentration profiles, demonstrating RIF sustained release. The PK model predicted the ELF concentrations to be much higher with microspheres than with nebulized and IV RIF, over a prolonged time period, which was confirmed by BAL sampling. In conclusion this work demonstrated the benefit of using sustained-release microspheres administered as aerosols to maintain, over a prolonged time period, high levels of pulmonary concentrations of drugs characterized by a rapid absorption through the broncho-alveolar barrier. Moreover, PK modeling was a useful tool to build concentration-versus-time profiles in non-readily accessible ELF compartment and to assess the biopharmaceutical properties of aerosol formulations for lung delivery.

A comparative pharmacokinetic study was conducted in rats after intratracheal aerosolization of levofloxacin, as a solution, as immediate-release chitosan microspheres or as sustained-release PLGA microspheres. A pharmacokinetic model was constructed to model levofloxacin concentrations both in plasma and in the lung epithelial lining fluid (ELF). The plasma and ELF experimental concentration profiles versus time were similar for the intravenous and intratracheal levofloxacin solutions and for the intratracheal levofloxacin-loaded chitosan microsphere dry powder, indicating that levofloxacin diffused almost instantaneously through the broncho-alveolar barrier and that the chitosan microspheres released levofloxacin very rapidly, as anticipated from in vitro release studies. The bioavailability for the intratracheal levofloxacin solution and intratracheal chitosan microspheres was estimated to be 98% and 71%, respectively, both with a direct release into the ELF compartment. The ELF-to-unbound plasma AUC ratios were slightly above 2 and may result from an efflux transport. For the intratracheal PLGA microspheres, a high ELF-to-unbound plasma AUC concentration ratio (311) was observed and high levofloxacin concentrations were maintained in ELF for at least 72h in consistency with the in vitro release studies. The bioavailability was 92%, with 19% of the dose released immediately (burst release) into the ELF and 73% released slowly into the ELF from a depot compartment, i.e. the PLGA microspheres, according to a Weibull model. These results highlight the benefit of using sustained-release microspheres administered as aerosols to provide and to maintain high pulmonary concentrations of an antibiotic characterized with a high permeability profile through the broncho-alveolar barrier. The sustained-release microsphere dry powder aerosol may therefore provide advantages over solutions or pure drug dry powders for inhalation in terms of treatment efficiency, ease of use and frequency of administration.

In this paper, some analytical tools for the study of self-oscillating systems such as current-controlled static converters using pulse-width modulators are presented. These tools, based on the Tsypkin locus, concern the prediction of the switching frequency of the power stage and the characterization of its input–output behavior by an equivalent linear model. These first results, that can be used for any value of the duty cycle, are extended to the construction of the frequency response of the closed-loop system, where the power stage is replaced by a constant gain, associated with a constant time delay. This study is validated by experiments using a classical hysteresis current controller and a recent current controller without hysteresis. The obtained results are particularly useful for applications such as active filtering or high precision power supplies, where the frequency of the signal to follow can be close to one fifth of the switching frequency.

A rapid high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) assay was developed for the routine quantification of colistins A and B and their prodrugs, colistin methanesulfonate (CMS) A and CMS B, respectively, in human plasma and urine by using polymyxin B1 as the internal standard (IS). CMS concentrations were determined indirectly by subtracting the colistin concentrations determined in biological samples from the whole colistin concentrations determined after sample treatment with sulfuric acid in order to hydrolyze CMS into colistin. After extraction on a solid-phase extraction column, the colistins were separated on an XBrigde C 18 column with isocratic elution (run time, 3.8 min). The mobile phase was 0.1% (vol/vol) formic acid in acetonitrile-0.1% (vol/vol) formic acid in water (20:80, vol/vol), run at a 0.2-ml/min flow rate. Ions were detected in the turbo-ion-spray-positive and multiple-reaction-monitoring modes. The ions monitored (precursor [M + 2H] 2+ to product ions) were m/z 585.5/101.2 for colistin A, m/z 578.5/101.2 for colistin B, and m/z 602.5/241.2 for IS. Prevalidation studies demonstrated the stability of CMS in biological samples and extracts, a key point for the reliable quantification of colistin and CMS. The assay was accurate and reproducible for the quantification of colistins A and B and CMSs A and B in plasma samples over concentration ranges appropriate for pharmacokinetic studies: 0.024 to 6.144, 0.015 to 3.856, 0.029 to 7.492, and 0.010 to 2.508 μg/ml, respectively. In urine samples, the assay was validated over the same concentration ranges for colistins and over concentration ranges of 0.058 to 7.492 μg/ml and 0.020 to 2.508 μg/ml for CMSs A and B, respectively.

In this paper, a particular phenomenon called indirect synchronization is investigated on self-oscillating current controllers. This phenomenon appears in medium frequencies, when the reference signal frequency tends to the switching frequency. In a previous work, it has been shown that the indirect synchronization causes discontinuities on the frequential response of the system, making the various linear or continuous models inefficient. For high-accuracy applications, such as active filtering or high-precision power supply, these discontinuities are a real problem. Thus, it seems important to offer an analytical description of this phenomenon. In this paper, an analytical model of the indirect synchronization phenomenon is proposed and checked by simulation and experimental results.

International audience; Lung administration of antibiotics by nebulization is promising for improving treatment efficiency for pulmonary infections, as it increases drug concentration at sites of infection while minimizing systemic side effects. For poorly soluble molecules like rifampicin, cyclodextrins (CD) may improve lung delivery by permitting higher dosing. For this purpose, we investigated rifampicin-CD complexes in terms of rifampicin apparent solubility enhancement, effect on in vitro permeability on Calu-3 broncho-alveolar cells, effect on in vitro antibacterial activity against Acinetobacter baumannii and nebulization characteristics measured by NGI cascade impactor. Complexation efficiency between rifampicin and methylated beta-cyclodextrin (RAMEB) or hydroxypropyl-beta-cyclodextrin (HPbetaCD) was pH-dependent, involving the piperazin group. Rifampicin phase solubility diagrams constructed at pH 9 showed an A(L)-type curve for RAMEB and a B(S)-type for HPbetaCD. Stability constants calculated for a 1:1 molar ratio of CD/rifampicin were 73.4 +/- 8.2 M(-1) for RAMEB and 68.5 +/- 5.2 M(-1) for HPbetaCD. Complexes with RAMEB or HPbetaCD increased 22 times and 7.6 times respectively the apparent solubility of rifampicin and were found to be satisfactorily stable for 2 days when diluted in a solution at physiological pH. The nebulization of the complex solution created droplets in size range compatible with pulmonary deposition. Furthermore, the presence of HPbetaCD decreased the MMAD of the aerosolized droplets. Activity of RAMEB and HPbetaCD complexes measured by the total rifampicin MIC against A. baumannii was similar or lower to free rifampicin MIC respectively. Complexation did not alter the rifampicin permeability in the timescale of 1h as evaluated with a Calu-3 epithelial cell model, but acted as a reservoir for rifampicin. In conclusion, this work reports that CDs can be used as vectors for pulmonary nebulization to increase the amount of active rifampicin and optimize its lung pharmacokinetic profile.

This paper presents the analysis and design of a simple and effective switching frequency limitation process with sliding mode synthesis. The control scheme is based on self-oscillating phenomenon which naturally appears in relay feedback systems. Thanks to an analytical study, it shows that the maximum switching frequency of a sliding mode structure can always be limited by adding a simple second order filter in the feedback loop. To illustrate the implementation and the validity of this process, it is applied to a high dynamic voltage supply with a bandwidth of 2000 Hz and with a maximum switching frequency of 15 kHz. According to the experimental results, the switching frequency limitation process shows similar robustness properties to those of sliding mode control when the load and voltage supply change.

International audience; Ciprofloxacin (CIP) is an antibiotic that has been clinically trialed for the treatment of lung infections by aerosolisation. However, CIP is rapidly systemically absorbed after lung administration, increasing the risk for subtherapeutic pulmonary concentrations and resistant bacteria selection. In the presence of calcium, CIP forms complexes that reduce its oral absorption. Such complexation may slow down CIP absorption from the lung thereby maintaining high concentration in this tissue. Thus, we developed inhalable calcium-based inorganic-organic composite microparticles to sustain CIP within the lung. The aerodynamics and micromeritic properties of the microparticles were characterized. FTIR and XRD analysis suggest that the inorganic component of the particles comprised amorphous calcium carbonate and amorphous calcium formate, and that CIP and calcium interact in a 1:1 stoichiometry in the particles. CIP was completely released from the microparticles within 7 hours, with profiles showing a slight dependence on pH (5 and 7.4) compared to the dissolution of pure CIP. Transport studies of CIP across Calu-3 cell monolayers, in the presence of various calcium concentrations, showed a decrease of up to 84% in CIP apparent permeability. The apparent minimum inhibitory concentration of CIP against P. Aeruginosa and S. Aureus was not changed in the presence of the same calcium concentration. These results indicate that the designed particles should provide sustained levels of CIP with therapeutic effect in the lung. With these microparticles, it should be possible to control CIP pharmacokinetics within the lung, based on controlled CIP release from the particles and reduced apparent permeability across the epithelial barrier due to the cation-CIP interaction.

Protease inhibitors are successfully used for the treatment of acquired immune deficiency syndrome (AIDS) although their biopharmaceutical characteristics are not optimal. Prodrugs have therefore been synthesized to increase protease inhibitor bioavailability and brain distribution. Among several compounds tested, a valine derivative of indinavir (Ind(8)-Val) showed promising characteristics using an in-vitro Caco-2 cell model. The objective of this study was to further investigate this compound using in-situ and in-vivo approaches. The pharmacokinetics of indinavir (Ind) and Ind(8)-Val were investigated in rats after intravenous and oral administration. Free indinavir resulting from in-vivo hydrolysis of Ind(8)-Val could not be detected in the plasma of rats receiving Ind(8)-Val. Furthermore Ind(8)-Val bioavailability was only 32% on average compared with 76% for indinavir, and effective permeability coefficients determined with a single-pass intestinal perfusion method were close to 25 times 106 cms−1 for the two compounds. Brain-to-plasma concentration ratios in the post equilibrium phase after intravenous administration to mice were 9.7 ± 8.1% for indinavir and 2.5 ± 2.7% for Ind(8)-Val. In conclusion, the promising biopharmaceutical characteristics of Ind(8)-Val suggested from previous in-vitro experiments with the Caco-2 cell model were not confirmed by in-situ and in-vivo experiments.

Summary: Nanoparticle drug carriers consist of solid biodegradable particles in size ranging from 10 to 1000 nm (50–300 nm generally). They cannot freely diffuse through the blood-brain barrier (BBB) and require receptor-mediated transport through brain capillary endothelium to deliver their content into the brain parenchyma. Polysorbate 80-coated polybutylcyanoacrylate nanoparticles can deliver drugs to the brain by a still debated mechanism. Despite interesting results these nanoparticles have limitations, discussed in this review, that may preclude, or at least limit, their potential clinical applications. Long-circulating nanoparticles made of methoxypoly(ethylene glycol)- polylactide or poly(lactide-co-glycolide) (mPEG-PLA/PLGA) have a good safety profiles and provide drug-sustained release. The availability of functionalized PEG-PLA permits to prepare target-specific nanoparticles by conjugation of cell surface ligand. Using peptidomimetic antibodies to BBB transcytosis receptor, brain-targeted pegylated immunonanoparticles can now be synthesized that should make possible the delivery of entrapped actives into the brain parenchyma without inducing BBB permeability alteration. This review presents their general properties (structure, loading capacity, pharmacokinetics) and currently available methods for immunonanoparticle preparation.

The aim of this study was to evaluate glucose-bearing niosomes as a brain targeted delivery system for the vasoactive intestinal peptide (VIP). To this end, VIP/125I-VIP-loaded glucose-bearing niosomes were intravenously injected to mice. Brain uptake was determined by measuring the radioactivity of 125I-labeled VIP using gamma-counting, after intravenous administration of VIP in solution or encapsulated in glucose-bearing niosomes or in control niosomes. VIP integrity was assessed by reversed-phase HPLC analysis of brain extracts. Distribution of 125I-VIP derived radioactivity was examined from serial brain slices. HPLC analysis confirmed the presence of intact VIP in brain after administration of VIP-loaded niosomes, but not after administration of VIP solution. Encapsulation within glucose-bearing niosomes mainly allowed a significantly higher VIP brain uptake compared to control niosomes (up to 86%, 5min after treatment). Brain distribution of intact VIP after injection of glucose-bearing niosomes, indicated that radioactivity was preferentially located in the posterior and the anterior parts of the brain, whereas it was homogeneously distributed in the whole brain after the administration of control vesicles. In conclusion, this novel vesicular formulation of VIP delivers intact VIP to particular brain regions in mice. Glucose-bearing vesicles might be therefore a novel tool to deliver drugs across the blood-brain barrier (BBB).

The study reports the initial biological evaluation of targeted polymeric glycol chitosan vesicles as carrier systems for doxorubicin (Dox). Transferrin (Tf) was covalently bound to the Dox-loaded palmitoylated glycol chitosan (GCP) vesicles using dimethylsuberimidate (DMSI). For comparison, glucose targeted niosomes were prepared using N-palmitoyl glucosamine. Biological properties were studied using confocal microscopy, flow cytometry, and cytotoxicity assays as well as a mouse xenograft model. Tf vesicles were taken up rapidly with a plateau after 1-2 h and Dox reached the nucleus after 60-90 min. Uptake was not increased with the use of glucose ligands, but higher uptake and increased cytotoxicity were observed for Tf targeted as compared to GCP Dox alone. In the drug-resistant A2780AD cells and in A431 cells, the relative increase in activity was significantly higher for the Tf-GCP vesicles than would have been expected from the uptake studies. All vesicle formulations had a superior in vivo safety profile compared to the free drug. The in vitro advantage of targeted Tf vesicles did not translate into a therapeutic advantage in vivo. All vesicles reduced tumor size on day 2 but were overall less active than the free drug.

The aim of this work was the development of innovative levofloxacin-loaded swellable microspheres (MS) for the dry aerosol therapy of pulmonary chronicPseudomonas aeruginosainfections in Cystic Fibrosis patients. In a first step, a factorial design was applied to optimize formulations of chitosan-based MS with glutaraldehyde as crosslinker. After optimization, other crosslinkers (genipin, glutaric acid and glyceraldehyde) were tested. Analyses of MS included aerodynamic and swelling properties, morphology, drug loading, thermal and chemical characteristics,in vitroantibacterial activity and drug release studies. The prepared MS presented a drug content ranging from 39.8% to 50.8% of levofloxacin in an amorphous or dispersed state, antibacterial activity and fast release profiles. The highest degree of swelling was obtained for MS crosslinked with glutaric acid and genipin. These formulations also presented satisfactory aerodynamic properties, making them a promising alternative, in dry-powder inhalers, to levofloxacin solution for inhalation.

Purpose. To prepare polymeric vesicles and niosomes bearing glucose or transferrin ligands for drug targeting.

Cystic fibrosis (CF) is a complex inherited disease which affects many organs, including the pancreas and liver, gastrointestinal tract and reproductive system, sweat glands and, particularly, the respiratory system. Pseudomonas aeruginosa is the main cause of chronic airway infection. In order to reduce morbidity and mortality due to lung infection by P. aeruginosa, aerosol antibiotics have been used to achieve high local concentrations in the airways and to reduce systemic toxicity. In the course of this review, the current treatments to control CF lung infections by P. aeruginosa are presented. Some innovative aerosol formulations such as liposomes and microspheres are herein reviewed, which may improve the efficiency of anti-pseudomonal agents, and ensure patients’ compliance to treatments, by reducing dosing frequency and/or drug dose, while maintaining therapeutic efficacy, preventing the occurrence of bacterial resistance and/or reducing adverse effects due to their controlled-release properties.

The aim of this study was to evaluate the biopharmaceutical behavior of colistin methanesulfonate (CMS) with special focus on colistin presystemic formation after CMS nebulization in rats. CMS was administered (15 mg·kg −1 of body weight) either intravenously for systemic pharmacokinetic studies ( n = 6) or as an intratracheal nebulization for systemic pharmacokinetic studies ( n = 5) or for CMS and colistin concentration measurements in epithelial lining fluid (ELF) at 30, 120, and 240 min after nebulization ( n = 14). CMS and colistin concentrations were determined by a new liquid chromatography (LC)-tandem mass spectrometry (MS/MS) assay. Pharmacokinetic parameters were estimated by noncompartmental analysis. CMS and colistin pharmacokinetic data were consistent with previously published values when comparisons were possible. The fraction of the CMS dose converted systematically into colistin after intravenous CMS administration was estimated to be 12.5% on average. After CMS nebulization it was estimated that about two-thirds of the dose was directly absorbed within the systemic circulation, whereas one-third was first converted into active colistin, which was eventually absorbed. As a consequence, the colistin area under curve (AUC) reflecting systemic availability was about 4-fold greater after CMS intratracheal nebulization (607 ± 240 μg·min·ml −1 ) than after CMS intravenous administration (160 ± 20 μg·min·ml −1 ). CMS concentrations in ELF at 30 min and 120 min postnebulization were very high (in the order of several mg/ml) due to the limited volume of ELF but were considerably reduced at 240 min. Although lower (15% ± 5% at 120 min) in relative terms, colistin concentrations in ELF could be high enough for being active against microorganisms following CMS nebulization.

Moxifloxacin (MXF) is a fluoroquinolone antibiotic that is effective against respiratory infections. However, the mechanisms of MXF lung diffusion are unknown. Active transport in other tissues has been suggested for several members of the fluoroquinolone family. In this study, transport of MXF was systematically investigated across a Calu-3 lung epithelial cell model. MXF showed polarized transport, with the secretory permeability being twice as high as the absorptive permeability. The secretory permeability was concentration dependent (apparent P max = 13.6 × 10 −6 cm·s −1 ; apparent K m = 147 μM), suggesting saturated transport at concentrations higher than 350 μg/ml. The P-glycoprotein inhibitor PSC-833 inhibited MXF transport in both directions, whereas probenecid, a multidrug resistance-related protein inhibitor, appeared to have no effect in the Calu-3 model. Moreover, rifampin, a known inducer of efflux transport proteins, upregulated the expression of P-glycoprotein in Calu-3 cells and enhanced MXF active transport. In conclusion, this study clearly indicates that MXF is subject to P-glycoprotein-mediated active transport in the Calu-3 model. This P-glycoprotein-dependent secretion may lead to higher MXF epithelial lining fluid concentrations than those in plasma. Furthermore, drug-drug interactions may be expected when MXF is combined with other P-glycoprotein substrates or modulators.

International audience; The aim of this work was to study in rats the nasal route for the brain delivery of the vasoactive intestinal peptide (VIP) neuropeptide. After evaluating VIP stability in solutions obtained from nasal washes, the effect of formulation parameters (pH 4-9, 0-1% (w/v) lauroylcarnitine (LC), hypo- or isoosmolality) on the brain uptake of intranasally administered VIP (10(-8)M)/125I-VIP (300,000 cpm/ml) was studied, using an in situ perfusion technique. Brain radioactivity distribution was assessed by quantitative autoradiographic analysis. Results were compared to intravenously administered VIP. With a hypotonic formulation at pH 4 containing 0.1% LC and 1% bovine serum albumin, VIP stability was satisfactory and loss by adsorption was minimal. Using this formulation, around 0.11% of initial radioactivity was found in the brain after 30 min perfusion and was located in the olfactory bulbs, the midbrain and the cerebellum. HPLC analysis of brain and blood extracts demonstrated the presence of intact VIP in brain and its complete degradation in the blood compartment. By intravenous administration, no intact VIP was found either in brain or in blood. In conclusion, intact VIP could be delivered successfully to the brain using the intranasal route for administration.

The growth rate of numerous cancer cell lines is regulated in part by actions of neuropeptides of the vasoactive intestinal peptide (VIP) family, which also includes pituitary adenylate cyclase-activating peptide (PACAP), glucagon, and peptide histidine/isoleucine (PHI). The aim of this work was to investigate the effect of these peptides on the growth of the rat glioblastoma cell line C6 in vitro. We also sought to determine which binding sites were correlated with the effects observed. Proliferation studies performed by means of a CyQuant trade mark assay showed that VIP and PACAP strongly stimulated C6 cell proliferation at most of the concentrations tested, whereas PHI increased cell proliferation only when associated with VIP. Two growth hormone-releasing factor (GRF) derivatives and the VIP antagonist hybrid peptide neurotensin-VIP were able to inhibit VIP-induced cell growth stimulation, even at very low concentrations. Binding experiments carried out on intact cultured C6 cells, using 125I-labeled VIP and PACAP as tracers, revealed that the effects of the peptides on cell growth were correlated with the expression on C6 cells of polyvalent high-affinity VIP-PACAP binding sites and of a second subtype corresponding to very high-affinity VIP-selective binding species. The latter subtype, which interacted poorly with PACAP with a 10,000-fold lower affinity than VIP, might mediate the antagonist effects of neurotensin- VIP and of both GRF derivatives on VIP-induced cell growth stimulation.