Search

LLNL's project to construct the National Ignition Facility (NIF), a 192 beam laser system capable of generating enough light energy necessary to achieve fusion ignition, will require 26,641 small optics, many of which will be supplied in the form of cleaned, tested and aligned assemblies. These assemblies will be built to print, cleaned to specifications, and tested to performance specifications, ready to be installed in the laser system. A wide range of potential suppliers will participate in the manufacture of these sophisticated opto-mechanical systems. The injection laser system requires 7,440 precision optical components manufactured to state of the art performance specifications. In addition to 550 aspheric lenses, almost 2,000 precision spherical elements are required. Wave-fronts are specified in terms of P-V, RMS and RMS Gradient wave-front error, with strict requirements on the filtering and resolution which is required. Precision polarizers, high reflectors, leaking mirrors, high damage threshold coatings and cleanliness levels of 50 to 100 are also specified for this section of the NIF laser. The alignment and diagnostics systems for the NIF require 19,201 optics, many of which have requirements that exceed those of the injection laser system. All of these optics will be purchased using the ISO 10110 drawing notations. Other sections of the laser system will utilize commercial, off the shelf components to control cost. This paper will give an overview of the project and its objectives, with specific attention to the small optics required for the NIF.

Atmospheric turbulence severely limits the resolution of ground-based telescopes. Adaptive optics can correct for the aberrations caused by the atmosphere, but requires a bright wavefront reference source in close angular proximity to the object being imaged. Since natural reference stars of the necessary brightness are relatively rare, methods of generating artificial reference beacons have been under active investigation for more than a decade. In this paper, we report the first significant image improvement achieved using a sodium-layer laser guide star as a wavefront reference for a high-order adaptive optics system. An artificial beacon was created by resonant scattering from atomic sodium in the mesosphere, at an altitude of 95 km. Using this laser guide star, an adaptive optics system on the 3 m Shane Telescope at Lick Observatory produced a factor of 2.4 increase in peak intensity and a factor of 2 decrease in full width at half maximum of a stellar image, compared with image motion compensation alone. The Strehl ratio when using the laser guide star as the reference was 65% of that obtained with a natural guide star, and the image full widths at half maximum were identical, 0.3 arc sec, using either the laser or the natural guide star. This sodium-layer laser guide star technique holds great promise for the world's largest telescopes.

A sodium-layer laser guide star adaptive optics system has been developed at Lawrence Livermore National Laboratory (LLNL) for use on the 3-meter Shane telescope at Lick Observatory. The system is based on a 127-actuator continuous-surface deformable mirror, a Hartmann wavefront sensor equipped with a fast-framing low-noise CCD camera, and a pulsed solid-state-pumped dye laser tuned to the atomic sodium resonance line at 589 nm. The adaptive optics system has been tested on the Shane telescope using natural reference stars yielding up to a factor of 12 increase in image peak intensity and a factor of 6.5 reduction in image full width at half maximum (FWHM). The results are consistent with theoretical expectations. The laser guide star system has been installed and operated on the Shane telescope yielding a beam with 22 W average power at 589 nm. Based on experimental data, this laser should generate an 8th magnitude guide star at this site, and the integrated laser guide star adaptive optics system should produce images with Strehl ratios of 0.4 at 2.2 {mu}m in median seeing and 0.7 at 2.2 {mu}m in good seeing.

We will describe an adaptive optics system developed for the 1 meter Nickel and 3 meter Shane telescopes at Lick Observatory. Observing wavelengths will be in the visible for the 1 meter telescope and in the near IR on the 3 meter. The adaptive optics system design is based on a 69 actuator continuous surface deformable mirror and a Hartmann wavefront sensor equipped with an intensified CCD framing camera. The system has been tested at the Cassegrain focus of the 1 meter telescope where the subaperture size is 12.5 cm. The wavefront control calculations are performed on a four processor single board computer controlled by a Unix-based system. We will describe the optical system and give details of the wavefront control system design. We will present predictions of the system performance and initial test results.

The architecture and major system components of the sodium-layer laser guide star system at LLNL will be described, and experimental results reported. The subsystems include the laser system, the beam delivery system including a pulse stretcher and beam pointing control, the beam director, and the telescope with its adaptive-optics package.

Recent results from the Laser Guide Star Project at Lawrence Livermore National Laboratory are presented. Photometry of the return signal has shown that the photon return is approximately 10 photons/cm2/ms at the pupil of the receiving telescope in agreement with a detailed model of the sodium interaction. Wavefronts of the laser guide star have also been measured with a Shack-Hartmann technique and power spectra have been shown to agree with those of nearby natural stars. Plans for closed loop demonstrations using the laser guide star at LLNL and nearby Lick Observatory are discussed.© (1993) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.