Search

Identifying tropical cyclone (TC) signatures in paleoclimate records enhances our understanding of long-term TC activity trends and the climatic factors influencing TC evolution. Stalagmites are considered promising archives for recording TC activity. However, despite the western North Pacific being the most TC-active ocean basin globally, it lacks stalagmite-based TC reconstructions. Here, we present a seasonally resolved stalagmite δ18O record from XRY cave in Southeast China, covering the period from 1951 to 2018 CE, to identify annual signals of strong TC activity. We propose that the minimum seasonal XRY δ18O value of each year can reconstruct regional TC activity, achieving an identification rate of 86% for strong TC years in study area. This demonstrates the feasibility of using stalagmites for TC reconstruction in Southeast China. Moreover, our research shows that inland stalagmites can still capture TC activity signals, which will promote the use of stalagmites in obtaining long-term records of post-landfall TC activity and inland impacts. [ABSTRACT FROM AUTHOR]

A technique is developed to quantify the ultra-trace 231Pa (35–3904 ag) concentration in seawater using multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). The method is a modification of the process developed by Shen et al. (Anal Chem 75(5):1075–1079, 2003. https://doi.org/10.1021/ac026247r) and extends it to the application of very low levels of actinides, and the 35 ag 231Pa can be measured with a precision of 15%. The total process blank for the water column was 0.02 ag/g, while the values of the large and small particles were ~ 30 ag/g. The ionization efficiency (ions generated/atom loaded) varies from 0.7 to 2.4%. The measurement time is 2–5 min. The amount of 231Pa needed to produce 231Pa data with an uncertainty of ± 0.8–15% is 35–3904 ag (~ 0.9 × 105 to 10 × 106 atoms). Replicate measurements of known standards and seawater samples demonstrate that the analytical precision approximates that expected from counting statistics, and that based on detection limits of 52 ag, 55 ag, and 28 ag, protactinium can be detected in a minimum seawater sample size of ~ 2.6 L for small suspended particulate matter (> 0.8 μm and < 51 μm), ~ 3.0 L for large suspended particulate matter (> 51 μm), and ~ 56 mL for filtered (< 0.45 μm) seawater. The concentration of 231Pa (several attograms per liter) can be determined with an uncertainty of ± 2–8% (2σ) for suspended particulate matter filtered from ~ 60 L of seawater. For the dissolved fraction, ~ 1 L of seawater yields 231Pa measurements with a precision of 0.8–10%. The sample size requirements are several orders of magnitude less than traditional decay-counting techniques, and the precision is better than that previously reported for ICP-MS techniques. Our technique can also be applied to other environmental samples, including river, lake, and cave water samples. [ABSTRACT FROM AUTHOR]