Search

This work thoroughly investigates chemical solvent-particles interactions during the formation of composite particles by pulsed laser melting of α-Fe2O3. Two solvents, with different dielectric constants, such as ethyl acetate (εr = 6) and ethanol (εr = 24.6), were examined in terms of their effect on the morphology, size, and phase composition of iron oxide composites. We calculated the laser fluence curves using the heating-melting-evaporation approach to identify the critical particle size that undergoes the phase changes first. We assessed the temperature of the particles irradiated with 390 mJ/pulse.cm2 in both solvents, including the heat dissipation between the particles and the liquid. The phase diagram of the Fe–O–C–H system was calculated to determine the temperature–pressure relationship of the system in equilibrium. We also employed an in situ GC–MS analysis to identify the volatile products during irradiation. Based on our experimental results, we concluded that the final diameter of the composites increases from 400 to 600 nm, along with the decreasing dielectric constant of the solvent, which is related to the different polarization of the organic liquid and the degree of particle agglomeration. The reduction of hematite in ethanol proceeded much faster, ending up with Fe/FeCx, while in ethyl acetate, it ended up with Fe3O4. Among all the particles, those with a diameter of 200 nm have the highest temperature and undergo the phase transition first. The temperature of a 200 nm composite particle in ethanol is slightly lower than in ethyl acetate, i.e. 1870 K as compared to 1902 K. Phase equilibrium diagrams proved the existence of Fe, FeO, and Fe3O4 as the preferred phases at about 1900 K. Our research provides a new insight into the process of submicron particle formation during pulsed laser irradiation and allows proposing a mechanism for the growth of particles of different size and phase composition depending on the solvent. [ABSTRACT FROM AUTHOR]

In this paper, we present results of dielectric and shear-mechanical studies for amine (2-ethyl-1-hexylamine) and thiol (2-ethyl-1-hexanethiol) derivatives of the monohydroxy alcohol, 2-ethyl-1-hexanol. The amine and thiol can form hydrogen bonds weaker in strength than those of the alcohol. The combination of dielectric and shear-mechanical data enables us to reveal the presence of a relaxation mode slower than the a-relaxation. This mode is analogous to the Debye mode seen in monohydroxy alcohols and demonstrates that supramolecular structures are present for systems with lower hydrogen bonding strength. We report some key features accompanying the decrease in the strength of the hydrogen bonding interactions on the relaxation dynamics close to the glass-transition. This includes changes (i) in the amplitude of the Debye and a-relaxations and (ii) the separation between primary and secondary modes. [ABSTRACT FROM AUTHOR]

In this Communication, we present experimental studies that put new insight into the puzzling nature of the Debye relaxation found in the supercooled liquid state of racemic ibuprofen. The appearance of D-relaxation in the loss spectra of non-hydrogen bonding methylated derivate of ibuprofen has proven that Debye relaxation is related solely with conformational changes of the carboxyl group, termed in this paper as synperiplanar-antiperiplanar. Our studies indicate that the presence of hydrogen bonding capabilities is not here the necessary condition to observe Debye process, however, their occurrence might strongly influence α- and D-relaxations dynamics. Interestingly, the activation energy of the D-process in ibuprofen methyl ester on approaching Tg was found to be perfectly consistent with that reported for ibuprofen by Affouard and Correia [J. Phys. Chem. B 114, 11397-11402 (2010)] (∼39 kJ/mol). Finally, IR measurements suggest that the equilibrium between conformers concentration depends on time and temperature, which might explain why the appearance of D-relaxation in supercooled ibuprofen depends on thermal history of the sample. [ABSTRACT FROM AUTHOR]

The NiTi shape memory alloy was covered with chitosan/silver layer. Coatings were deposited at room temperature using combination of processing parameters such as deposition voltage and amount of silver in colloidal suspension. Structure of layers was studied by means of X-ray diffraction. Quality of the coatings was evaluated basing on observations done in scanning electron microscopy. Transformation behaviour of coated samples was studied with use of differential scanning calorimeter. The covered sample revealed presence of the reversible martensitic transformation and ability to deformation (in bending mode) up to 8%. Forward martensitic transformation, in as-received NiTi alloy and in alloy after layer deposition occurred in two steps B2-R-B19’. After deformation quality of the chitosan/silver layer remained unchanged.

This work thoroughly investigates chemical solvent-particles interactions during the formation of composite particles by pulsed laser melting of α-Fe2O3. Two solvents, with different dielectric constants, such as ethyl acetate (εr = 6) and ethanol (εr = 24.6), were examined in terms of their effect on the morphology, size, and phase composition of iron oxide composites. We calculated the laser fluence curves using the heating-melting-evaporation approach to identify the critical particle size that undergoes the phase changes first. We assessed the temperature of the particles irradiated with 390 mJ/pulse.cm2 in both solvents, including the heat dissipation between the particles and the liquid. The phase diagram of the Fe–O–C–H system was calculated to determine the temperature–pressure relationship of the system in equilibrium. We also employed an in situ GC–MS analysis to identify the volatile products during irradiation. Based on our experimental results, we concluded that the final diameter of the composites increases from 400 to 600 nm, along with the decreasing dielectric constant of the solvent, which is related to the different polarization of the organic liquid and the degree of particle agglomeration. The reduction of hematite in ethanol proceeded much faster, ending up with Fe/FeCx, while in ethyl acetate, it ended up with Fe3O4. Among all the particles, those with a diameter of 200 nm have the highest temperature and undergo the phase transition first. The temperature of a 200 nm composite particle in ethanol is slightly lower than in ethyl acetate, i.e. 1870 K as compared to 1902 K. Phase equilibrium diagrams proved the existence of Fe, FeO, and Fe3O4 as the preferred phases at about 1900 K. Our research provides a new insight into the process of submicron particle formation during pulsed laser irradiation and allows proposing a mechanism for the growth of particles of different size and phase composition depending on the solvent. [ABSTRACT FROM AUTHOR]

Molecular dynamics and transport coefficients change significantly around the so-called Arrhenius crossover in glass-forming systems. In this article, we revisit the dynamic processes occurring in a glass-forming macrocyclic crown thiaether MeBzS 2 O above its glass transition, revealing two crossover temperatures: T B at 309 and T A at 333 K. We identify the second one as the Arrhenius crossover that is closely related to the normal-to-supercooled liquid transition in this compound. We show that the transformation occurring at this point goes far beyond molecular dynamics (where the temperature dependence of structural relaxation times changes its character from activation-like to super-Arrhenius), being reflected also in the internal structure and diffraction pattern. In this respect, we found a twofold local organization of the nearest-neighbor molecules via weak van der Waals forces, without the formation of any medium-range order or mesophases. The nearest surrounding of each molecule evolves structurally in time due to the ongoing fast conformational changes. We identify several conformers of MeBzS 2 O , demonstrating that its lowest-energy conformation is preferred mainly at lower temperatures, i.e., in the supercooled liquid state. Its increased prevalence modifies locally the short-range intermolecular order and promotes vitrification. Consequently, we indicate that the Arrhenius transition is fuelled rather by conformational changes in this glass-forming macrocyclic crown thiaether, which is a different scenario from the so-far existing concepts. Our studies combine broadband dielectric spectroscopy (BDS), X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, molecular dynamics (MD) simulations, and density functional theory (DFT) calculations.

Although the antimicrobial activity of nanoparticles (NPs) penetrating inside the cell is widely recognised, the toxicity of large NPs (>10 nm) that cannot be translocated across bacterial membranes remains unclear. Therefore, this study was performed to elucidate the direct effects of Ag-NPs, Cu-NPs, ZnO-NPs and TiO 2 -NPs on relative membrane potential, permeability, hydrophobicity, structural changes within chemical compounds at the molecular level and the distribution of NPs on the surfaces of the bacteria Bacillus cereus and Staphylococcus epidermidis. Overall analysis of the results indicated the different impacts of individual NPs on the measured parameters in both strains depending on their type and concentration. B. cereus proved to be more resistant to the action of NPs than S. epidermidis. Generally, Cu-NPs showed the most substantial toxic effect on both strains; however, Ag-NPs exhibited negligible toxicity. All NPs had a strong affinity for cell surfaces and showed strain-dependent characteristic dispersion. ATR-FTIR analysis explained the distinctive interactions of NPs with bacterial functional groups, leading to macromolecular structural modifications. The results presented provide new and solid evidence for the current understanding of the interactions of metallic NPs with bacterial membranes., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Oliwa Metryka reports financial support was provided by National Science Centre, Poland. Oliwia Metryka reports a relationship with National Science Centre Poland that includes: funding grants. Oliwia Metryka has patent licensed to CC-BY public copyright licence. The Authors declare no conflict of interest. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Despite decades of studies, a clear understanding of near- T g phenomena remains challenging for glass-forming systems. This review delves into the intricate molecular dynamics of the small, heterocyclic thioether, 6-methyl-2,3-dihydro-1,4-benzodithiine (MeBzS 2 ), with a particular focus on its near- T g cold crystallization and relaxation mechanisms. Investigating isothermal crystallization kinetics at various temperatures reveals a significant interplay between its molecular dynamics and recrystallization from a supercooled liquid. We also identify two independent interconversion paths between energetically privileged conformers, characterized by strained transition states. We demonstrate that these spatial transformations induce substantial alterations in the dipole moment orientation and magnitude. Our investigation also extends to the complex salt PdCl 2 (MeBzS 2 ), where we observe the transient conformers directly, revealing a direct relationship between their abundance and the local or macroscopic electric field. The initially energetically privileged isomers in an undisturbed system become less favored in the presence of an external electric field or ions, resulting even in an unexpected inversion of states. Consequently, we confirm the intramolecular character of secondary relaxation in MeBzS 2 and its mechanism related to conformational changes within the heterocyclic ring. The research is based on the combination of broadband dielectric spectroscopy, X-ray diffraction, and quantum density functional theory calculations.

In response to the persistent challenge of heavy and noble metal environmental contamination, our research explores a new idea to capture silver through porous spherical silica nanostructures. The aim was realized using microwave radiation at varying power (P = 150 or 800 W) and exposure times (t = 60 or 150 s). It led to the development of a silica surface with enhanced metal-capture capacity. The microwave-assisted silica surface modification influences the notable changes within the carrier but also enforces the crystallization process of silver nanoparticles with different morphology, structure, and chemical composition. Microwave treatment can also stimulate the formation of core-shell bioactive Ag/Ag 2 CO 3 heterojunctions. Due to the silver nanoparticles' sphericity and silver carbonate's presence, the modified nanocomposites exhibited heightened toxicity against common microorganisms, such as E. coli and S. epidermidis . Toxicological assessments, including minimum inhibitory concentration (MIC) and half-maximal inhibitory concentration (IC 50 ) determinations, underscored the efficacy of the nanocomposites. This research represents a significant stride in addressing pollution challenges. It shows the potential of microwave-modified silicas in the fight against environmental contamination. Microwave engineering underscores a sophisticated approach to pollution remediation and emphasizes the pivotal role of nanotechnology in shaping sustainable solutions for environmental stewardship.

The objective of this research was to develop a surface modification for the NiTi shape memory alloy, thereby enabling its long-term application in implant medicine. This was achieved through the creation of innovative multifunctional hybrid layers comprising a nanometric molecular system of silver-rutile (Ag-TiO 2 ), known for its antibacterial properties, in conjunction with bioactive submicro- and nanosized hydroxyapatite (HAp). The multifunctional, continuous, crack-free coatings were produced using the electrophoretic deposition method (EPD) at 20 V/1 min. Structural and morphological analyses through Raman spectrometry and scanning electron microscopy (SEM) provided comprehensive insights into the obtained coating. The silver within the layer existed in the form of nanometric silver carbonates (Ag 2 CO 3 ) and metallic nanosilver. Based on DTA/TG results, dilatometric measurements, and high-temperature microscopy, the heat treatment temperature for the deposited layers was set at 800 °C for 2 h. The procedures applied resulted in the creation of a new generation of materials with a distinct structure compared with the initial nanopowders. The resulting composite layer, measuring 2 μm in thickness, comprised hydroxyapatite (HAp), apatite carbonate (CHAp), metallic silver, silver oxides, Ag@C, and rutile exhibiting a defective structure. This structural characteristic contributes significantly to its heightened activity, influencing both bioactivity and biocompatibility properties.

This article presents the synthesis and molecular dynamics investigation of three novel cyclic thioethers: 2,3-(4'-methylbenzo)-1,4,7,10-tetrathiacyclododeca-2-ene (compound 1 ), 2,3,14,15-bis(4',4″(5″)-methylbenzo)-1,4,7,10,13,16,19,22,25-octathiacyclotetracosa-2,14-diene (compound 2 ), and 2,3,8,9-bis(4',4″(5″)-methylbenzo)-1,4,7,10-tetrathiacyclododeca-2,8-diene (compound 3 ). The compounds exhibit relatively high glass transition temperatures ( T g ), which range between 254 and 283 K. This characteristic positions them within the so-far limited category of crown-like glass-formers. We demonstrate that cyclic thioethers may span both the realms of ordinary and sizeable molecular glass-formers, each featuring distinct physical properties. Furthermore, we show that the T g follows a sublinear power law as a function of the molar mass within this class of compounds. We also reveal multiple dielectric relaxation processes of the novel cyclic thioethers. Above the T g , their dielectric loss spectra are dominated by a structural relaxation, which originates from the cooperative reorientation of entire molecules and exhibits an excess wing on its high-frequency slope. This feature has been attributed to the Johari-Goldstein (JG) process. Each investigated compound exhibits also at least one intramolecular secondary non-JG relaxation stemming from conformational changes. Their activation energies range from approximately 19 kJ/mol to roughly 40 kJ/mol. Finally, we analyze the high-pressure molecular dynamics of compound 1 , revealing a pressure-induced increase in its T g with a dT g / dp coefficient equal to 197 ± 8 K/GPa.

Recent advances in nanotechnology and development of nanoformulation methods, has enabled the emergence of precision farming - a novel farming method that involves nanopesticides and nanoferilizers. Zinc-oxide nanoparticles serve as a Zn source for plants, but they are also used as nanocarriers for other agents, whereas copper-oxide nanoparticles possess antifungal activity, but in some cases may also serve as a micronutrient providing Cu ions. Excessive application of metal-containing agents leads to their accumulation in soil, where they pose a threat to non-target soil organisms. In this study, soils obtained from the environment were amended with commercial zinc-oxide nanoparticles: Zn-O x NPs (10-30) , and newly-synthesized copper-oxide nanoparticles: Cu-O x NPs (1-10) . Nanoparticles (NPs) in 100 and 1000 mg kg -1 concentrations were added in separate set-ups, representing a soil-microorganism-nanoparticle system in a 60-day laboratory mesocosm experiment. To track environmental footprint of NPs on soil microorganisms, a Phospholipd Fatty Acid biomarker analysis was employed to study microbial community structure, whereas Community-Level Physiological Profiles of bacterial and fungal fractions were measured with Biolog Eco and FF microplates, respectively. The results revealed a prominent and persistent effects exerted by copper-containing nanoparticles on non-target microbial communities. A severe loss of Gram-positive bacteria was observed in conjunction with disturbances in bacterial and fungal CLPPs. These effects persisted till the end of a 60-day experiment, demonstrating detrimental rearrangements in microbial community structure and functions. The effects imposed by zinc-oxide NPs were less pronounced. As persistent changes were observed for newly synthesized Cu-containing NPs, this work stresses the need for obligatory testing of nanoparticle interactions with non-target microbial communities in long-term experiments, especially during the approval procedures of novel nano-substances. It also underlines the role of in-depth physical and chemical studies of NP-containing agents, which may be tweaked to mitigate the unwanted behavior of such substances in the environment and preselect their beneficial characteristics., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier GmbH. All rights reserved.)

Extracellular matrices contain fibril-like polymers often organized in parallel arrays. Although their role in morphogenesis has been long recognized, it remains unclear how the subcellular control of fibril synthesis translates into organ shape. We address this question using the Arabidopsis sepal as a model organ. In plants, cell growth is restrained by the cell wall (extracellular matrix). Cellulose microfibrils are the main load-bearing wall component, thought to channel growth perpendicularly to their main orientation. Given the key function of CELLULOSE SYNTHASE INTERACTIVE1 (CSI1) in guidance of cellulose synthesis, we investigate the role of CSI1 in sepal morphogenesis. We observe that sepals from csi1 mutants are shorter, although their newest cellulose microfibrils are more aligned compared to wild-type. Surprisingly, cell growth anisotropy is similar in csi1 and wild-type plants. We resolve this apparent paradox by showing that CSI1 is required for spatial consistency of growth direction across the sepal., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2023 The Author(s). Published by Elsevier Inc. All rights reserved.)

Heavy metals and other organic pollutants burden the environment, and their removal or neutralization is still inadequate. The great potential for development in this area includes porous, spherical silica nanostructures with a well-developed active surface and open porosity. In this context, we modified the surface of silica spheres using a microwave field (variable power and exposure time) to increase the metal uptake potential and build stable bioactive Ag 2 O/Ag 2 CO 3 heterojunctions. The results showed that the power of the microwave field (P = 150 or 700 W) had a more negligible effect on carrier modification than time (t = 60 or 150 s). The surface-activated and silver-loaded silica carrier features like morphology, structure, and chemical composition correlate with microbial and antioxidant enzyme activity. We demonstrated that the increased sphericity of silver nanoparticles enormously increased toxicity against E. coli , B. cereus , and S. epidermidis . Furthermore, such structures negatively affected the antioxidant defense system of E. coli , B. cereus , and S. epidermidis through the induction of oxidative stress, leading to cell death. The most robust effects were found for nanocomposites in which the carrier was treated for an extended period in a microwave field.

To functionalize and improve the biocompatibility of the surface of a medical implant made of NiTi shape memory alloy and used in practice, a clamp, multifunctional layers composed of amorphous TiO 2 interlayer, and a hydroxyapatite coating were produced. Electrophoresis, as an efficient method of surface modification, resulted in the formation of a uniform coating under a voltage of 60 V and deposition time of 30 s over the entire volume of the implant. The applied heat treatment (800 °C/2 h) let toa dense, crack-free, well-adhered HAp coating with a thickness of ca. 1.5 μm. and a high crack resistance to deformation associated with the induction of the shape memory effect in the in the deformation range similar to the real implant work after implantation. Moreover, the obtained coating featured a hydrophilic (CA = 59.4 ± 0.3°) and high biocompatibility.

Nanoindentations and the Raman spectroscopy measurements were carried out on the (001) surface of undoped and S-doped InP crystal. The samples were indented with the maximum load ranging from 15 mN to 100 mN. The phase transition B3→B1 was not confirmed by spectroscopic experiments, indicating a plastic deformation mechanism governed by dislocations activity. Increasing the maximum indentation load shifts and the longitudinal and transverse optical Raman bands to lower frequencies reveals a reduction in the elastic energy stored in the plastic zone right below the indentation imprint. Mechanical experiments have shown that a shift in Raman bands occurs alongside the indentation size effect. Indeed, the hardness of undoped and S-doped InP crystal decreases as a function of the maximum indentation load.

The 5-aminolevulinic acid (5-ALA) prodrug is widely used in clinical applications, primarily for skin cancer treatments and to visualize brain tumors in neurosurgery. Unfortunately, its applications are limited by unfavorable pharmacological properties, especially low lipophilicity; therefore, efficient nanovehicles are needed. For this purpose, we synthesized and characterized two novel water-soluble fullerene nanomaterials containing 5-ALA and d-glucuronic acid components. Their physicochemical properties were investigated using NMR, XPS, ESI mass spectrometry, as well as TEM and SEM techniques. In addition, HPLC and fluorescence measurements were performed to evaluate the biological activity of the fullerene nanomaterials in 5-ALA delivery and photodynamic therapy (PDT); additional detection of selected mRNA targets was carried out using the qRT-PCR methodology. The cellular response to the [60]fullerene conjugates resulted in increased levels of ABCG2 and PEPT-1 genes, as determined by qRT-PCR analysis. Therefore, we designed a combination PDT approach based on two fullerene materials, C 60 -ALA and C 60 -ALA-GA, along with the ABCG2 inhibitor Ko143., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

We present the study of pristine and calcined f-MWCNTs functionalized by nitrogen-containing functional groups. We focus on the structural and microstructural modification tuned by the previous annealing. However, our primary goal was to analyze the electronic structure and magnetic properties in relation to the structural properties using a multi-technique approach. The studies carried out by X-ray diffraction, XPS, and 57 Fe Mössbauer spectrometry revealed the presence of γ-Fe nanoparticles, Fe 3 C, and α-FeOOH as catalyst residues. XPS analysis based on the deconvolution of core level lines confirmed the presence of various nitrogen-based functional groups due to the purification and functionalization process of the nanotubes. The annealing procedure leads to a structural modification mainly associated with removing surface impurities as purification residues. Magnetic studies confirmed a significant contribution of Fe 3 C as evidenced by a Curie temperature estimated at T C = 452 ± 15 K. A slight change in magnetic properties upon annealing was revealed. The detailed studies performed on nanotubes are extremely important for the further synthesis of composite materials based on f-MWCNTs.

Photoluminescence is known to have huge potential for applications in studying biological systems. In that respect, phosphorescent dye molecules open the possibility to study the local slow solvent dynamics close to hard and soft surfaces and interfaces using the triplet state (TSD: triplet state solvation dynamics). However, for that purpose, probe molecules with efficient phosphorescence features are required with a fixed location on the surface. In this article, a potential TSD probe is presented in the form of a nanocomposite: we synthesize spherical silica particles with 2-naphthalene methanol molecules attached to the surface with a predefined surface density. The synthesis procedure is described in detail, and the obtained materials are characterized employing transmission electron microscopy imaging, Raman, and X-ray photoelectron spectroscopy. Finally, TSD experiments are carried out in order to confirm the phosphorescence properties of the obtained materials and the route to develop phosphorescent sensors at silica surfaces based on the presented results is discussed.

This paper presents two water-soluble fullerene nanomaterials (HexakisaminoC 60 and monoglucosamineC 60 , which is called here JK39) that were developed and synthesized as non-viral siRNA transfection nanosystems. The developed two-step Bingel-Hirsch reaction enables the chemical modification of the fullerene scaffold with the desired bioactive fragments such as D-glucosamine while keeping the crucial positive charged ethylenediamine based malonate. The ESI-MS and 13 C-NMR analyses of JK39 confirmed its high T h symmetry, while X-ray photoelectron spectroscopy revealed the presence of nitrogen and oxygen-containing C-O or C-N bonds. The efficiency of both fullerenes as siRNA vehicles was tested in vitro using the prostate cancer cell line DU145 expressing the GFP protein. The HexakisaminoC 60 fullerene was an efficient siRNA transfection agent, and decreased the GFP fluorescence signal significantly in the DU145 cells. Surprisingly, the glycofullerene JK39 was inactive in the transfection experiments, probably due to its high zeta potential and the formation of an extremely stable complex with siRNA.

Recent years have seen the dynamic development of methods for functionalizing the surface of implants using biomaterials that can mimic the physical and mechanical nature of native tissue, prevent the formation of bacterial biofilm, promote osteoconduction, and have the ability to sustain cell proliferation. One of the concepts for achieving this goal, which is presented in this work, is to functionalize the surface of NiTi shape memory alloy by an atypical glass-like nanocomposite that consists of SiO 2 -TiO 2 with silver nanoparticles. However, determining the potential medical uses of bio(nano)coating prepared in this way requires an analysis of its surface roughness, tribology, or wettability, especially in the context of the commonly used reference coat-forming hydroxyapatite (HAp). According to our results, the surface roughness ranged between (112 ± 3) nm (Ag-SiO 2 )-(141 ± 5) nm (HAp), the water contact angle was in the range (74.8 ± 1.6)° (Ag-SiO 2 )-(70.6 ± 1.2)° (HAp), while the surface free energy was in the range of 45.4 mJ/m 2 (Ag-SiO 2 )-46.8 mJ/m 2 (HAp). The adhesive force and friction coefficient were determined to be 1.04 (Ag-SiO 2 )-1.14 (HAp) and 0.247 ± 0.012 (Ag-SiO 2 ) and 0.397 ± 0.034 (HAp), respectively. The chemical data showed that the release of the metal, mainly Ni from the covered NiTi substrate or Ag from Ag-SiO 2 coating had a negligible effect. It was revealed that the NiTi alloy that was coated with Ag-SiO 2 did not favor the formation of E. coli or S. aureus biofilm compared to the HAp-coated alloy. Moreover, both approaches to surface functionalization indicated good viability of the normal human dermal fibroblast and osteoblast cells and confirmed the high osteoconductive features of the biomaterial. The similarities of both types of coat-forming materials indicate an excellent potential of the silver-silica composite as a new material for the functionalization of the surface of a biomaterial and the development of a new type of functionalized implants.

In recent years, more and more emphasis has been placed on the development and functionalization of metallic substrates for medical applications to improve their properties and increase their applicability. Today, there are many different types of approaches and materials that are used for this purpose. Our idea was based on a combination of a chemically synthesized Ag-SiO 2 nanocomposite and the electrophoretic deposition approach on a NiTi-shape memory substrate. As a result, silver-silica coating was developed on a previously passivated alloy, which was then subjected to sintering at 700 °C for 2 h. The micrometer-sized coat-forming material was composed of large agglomerates consisting of silica and a thin film of submicron- and nano- spherical-shaped particles built of silver, carbon, and oxygen. Structurally, the coatings consisted of a combination of nanometer-sized silver-carbonate that was embedded in thin amorphous silica and siloxy network. The temperature impact had forced morphological and structural changes such as the consolidation of the coat-forming material, and the partial coalescence of the silver and silica particles. As a result, a new continuous complex ceramic coating was formed and was analyzed in more detail using the XPS, XRD, and Raman methods. According to the structural and chemical analyses, the deposited Ag-SiO 2 nanocomposite material's reorganization was due to its reaction with a passivated TiO 2 layer, which formed an atypical glass-like composite that consisted of SiO 2 -TiO 2 with silver particles that stabilized the network. Finally, the functionalization of the NiTi surface did not block the shape memory effect.

To solve the problem of human diseases caused by a combination of genetic and environmental factors or by microorganisms, intense research to find completely new materials is required. One of the promising systems in this area is the silver-silica nanocomposites and their derivatives. Hence, silver and silver oxide nanoparticles that were homogeneously distributed within a silica carrier were fabricated. Their average size was d = (7.8 ± 0.3) nm. The organic polymers (carboxymethylcellulose (CMC) and sodium alginate (AS)) were added to improve the biological features of the nanocomposite. The first system was prepared as a silver chlorine salt combination that was immersed on a silica carrier with coagulated particles whose size was d = (44.1 ± 2.3) nm, which coexisted with metallic silver. The second system obtained was synergistically interacted metallic and oxidized silver nanoparticles that were distributed on a structurally defective silica network. Their average size was d = (6.6 ± 0.7) nm. Physicochemical and biological experiments showed that the tiny silver nanoparticles in Ag/SiO 2 and Ag/SiO 2 @AS inhibited E. coli , P. aeruginosa , S. aureus , and L. plantarum's cell growth as well as caused a high anticancer effect. On the other hand, the massive silver nanoparticles of Ag/SiO 2 @CMC had a weaker antimicrobial effect, although they highly interacted against PANC-1. They also generated reactive oxygen species (ROS) as well as the induction of apoptosis via the p53-independent mechanism.

The magnetic behaviour of Mn 12 -stearate single-molecule magnets (SMMs) ([ Mn 12 O 12 ( CH 3 ( CH 2 ) 16 CO 2 ) 16 ] · 2 CH 3 COOH · 4 H 2 O ) on the surface of 300 nm spherical silica nanoparticles were investigated. The SMMs were bonded at the silica surface with the assumed number of anchoring points, which influenced on their degree of freedom and distribution. In order to check the properties of Mn 12 -stearate molecules separated on the silica surface, and check their interactions, the samples containing four different concentration of spacers per single anchoring unit and variously bonded Mn 12 -stearate particles were prepared. The materials have been examined using Raman spectroscopy, transmission electron microscopy, and SQUID magnetometry. The results of magnetic measurements showed a correlation between the way of single-molecule magnets immobilization onto the silica spheres and the magnetic properties of the obtained hybrid materials.

The surface modification of NiTi shape memory alloys is a method for increasing their multi-functionalities. In our solution, hydroxyapatite powder was mixed with a chemically synthesized silicon dioxide/silver (nSiO 2 /Ag) nanocomposite in a different weight ratio between components (1:1, 5:1, and 10:1) and then electrophoretically deposited on the surface of the NiTi alloy, under various time and voltage conditions. Subsequently, uniform layers were subjected to heat treatment at 700 °C for 2 h in an argon atmosphere to improve the strength of their adhesion to the NiTi substrate. A change in linear dimensions of the co-deposited materials during the sintering process was also analyzed. After the heat treatment, XRD, Raman, and Scanning Electron Microscopy (SEM) + Energy Dispersive Spectrometer (EDS) studies revealed the formation of completely new composite coatings, which consisted of rutile and TiO 2 -SiO 2 glass with silver oxide and HAp particles that were embedded into such coatings. It was found that spalling characterized the 1:1 ratio coating, while the others were crack-free, well-adhered, and capable of deformation to 3.5%. Coatings with a higher concentration of nanocomposite were rougher. Electrochemical impedance spectroscopy (EIS) tests in Ringer's solution revealed the capacitive behavior of the material with high corrosion resistance. The kinetics and susceptibility to pitting corrosion was the highest for the NiTi electrode that was coated with a 5:1 ratio HAp/nSiO 2 /Ag hybrid coating.

In this paper, we have studied the effect of both hard confinement (nanoporous membranes treated as nanoreactors) and high pressure (compression of system) on the progress of free-radical (FRP) and reversible addition-fragmentation chain transfer (RAFT) polymerizations of selected hardly polymerizable, sterically hindered imidazolium-based ionic monomer 1-octyl-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide ([OVIM][NTf 2 ]). These two innovative approaches, affecting (in a different way) the free volume of the polymerizing system, allows the reduction of the number of toxic substrates/catalysts, satisfying the requirement of green chemistry. It was found that at both conditions (high compression and confinement) the polymerizability of monomer, as well as the control over the reaction and the properties of the produced polyelectrolytes, have increased significantly. However, it should be added that there were noticeable differences between FRP carried out under confinement and at high pressures. Interestingly, by appropriate variation in thermodynamic conditions, it was possible to synthesize polymers of moderate molecular weight ( M n ∼ 58 kg mol -1 ) and relatively low dispersity ( Đ ∼ 1.7); while for the reaction performed within AAO pores of varying diameter ( d = 35 nm and d = 150 nm), macromolecules of higher M n but slightly broader dispersity indices ( Đ ∼ 2.2-2.7) were recovered. On the other hand, RAFT polymerization carried out under confinement and at elevated pressures yielded polymers with well-defined properties. Noteworthy is also the fact that nanopolymerization leads to polymers of comparable M n to those obtained at high-pressure studies but at significantly shorter reaction time ( t ∼ 2 hours). We believe that the presented data clearly demonstrated that both examined approaches (the compression and application of alumina templates, treated as nanoreactors) could be successfully used as additional driving forces to polymerize sterically hindered monomers and produce well-defined polymers in relatively short times. At the same time, it should be mentioned that both proposed polymerization methods enabled us to omit the addition of metal-based initiators/catalysts, which seem to be a crucial step towards further development of the alternative green synthesis of polyelectrolytes in the future., Competing Interests: The authors declare no competing financial interests., (This journal is © The Royal Society of Chemistry.)

Chlormayenite Ca 12 Al 14 O 32 [♦ 4 Cl 2 ] (♦-vacancy) is partially hydrated micro porouss mineral with hydroxide groups situated at various crystallographic sites. There are few mechanisms describing its hydration. The first one assumes Cl - substitution by OH - at the center of the structural cages (W-site). The second one determines the converting a T1O 4 tetrahedron to a T1O 3 (OH) 3 octahedron due to the replacement of oxygen at the O2 site by three OH-groups according to the scheme: ( O2 O 2-  +  W Cl - ) → 3 ×  O2a OH. The third mechanism, not considered so far in the case of zeolite-like minerals, includes the hydroxide incorporation in form of hydrogarnet defect due to the arrangement of tetrahedral (OH) 4 in vacant cages. This yields a strong hydrated phase containing even up to 35% of water more than in any currently known mineral applicable to Portland cement. Moreover, water molecules present in different structural cages are stable up to 355 K while dehydroxylation linked to the gradual loss of only 8% of OH - groups according to 3 O2a OH -  →  O2 O 2- + W OH - + g H 2 O occurs at temperature range from 355 K to 598 K.

Avascular necrosis, diagnosed on the basis of either a specific pathological modification of the articular surfaces of bone or its radiologic appearance in vertebral centra, has been recognized in many Mesozoic marine reptiles as well as in present-day marine mammals. Its presence in the zoological and paleontologic record is usually associated with decompression syndrome, a disease that affects secondarily aquatic vertebrates that could dive. Bone necrosis can also be caused by infectious processes, but it differs in appearance from decompression syndrome-associated aseptic necrosis. Herein, we report evidence of septic necrosis in the proximal articular surface of the femur of a marine reptile, Pistosaurus longaevus , from the Middle Triassic of Poland and Germany. This is the oldest recognition of septic necrosis associated with septic arthritis in the fossil record so far, and the mineralogical composition of pathologically altered bone is described herein in detail. The occurrence of septic necrosis is contrasted with decompression syndrome-associated avascular necrosis, also described in Pistosaurus longaevus bone from Middle Triassic of Germany., Competing Interests: We have no competing interests.

Background and Aims: The capitulum of Helichrysum bracteatum is surrounded by scarious involucral bracts that perform hygroscopic movements leading to bract bending toward or away from the capitulum, depending on cell wall water status. The present investigation aimed at explaining the mechanism of these movements., Methods: Surface strain and bract shape changes accompanying the movements were quantified using the replica method. Dissection experiments were used to assess the contribution of different tissues in bract deformation. Cell wall structure and composition were examined with the aid of light and electron microscopy as well as confocal Raman spectroscopy., Key Results: At the bract hinge (organ actuator) longitudinal strains at opposite surfaces differ profoundly. This results in changes of hinge curvature that drive passive displacement of distal bract portions. The distal portions in turn undergo nearly uniform strain on both surfaces and also minute shape changes. The hinge is built of sclerenchyma-like abaxial tissue, parenchyma and adaxial epidermis with thickened outer walls. Cell wall composition is rather uniform but tissue fraction occupied by cell walls, cell wall thickness, compactness and cellulose microfibril orientation change gradually from abaxial to adaxial hinge surface. Dissection experiments show that the presence of part of the hinge tissues is enough for movements., Conclusions: Differential strain at the hinge is due to adaxial-abaxial gradient in structural traits of hinge tissues and cell walls. Thus, the bract hinge of H. bracteatum is a structure comprising gradually changing tissues, from highly resisting to highly active, rather than a bi-layered structure with distinct active and resistance parts, often ascribed for hygroscopically moving organs., (© The Author 2017. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com)

We have investigated the molecular dynamics in supercooled liquid and glassy state of the pharmaceutical agent fenofibrate. To do that, dielectric relaxation studies at ambient and elevated pressure were performed. Data collected at atmospheric pressure were found to be in good agreement with that already reported in the literature. High-pressure studies enable us to distinguish the secondary relaxation processes of the different molecular origin. This includes (i) pressure insensitive γ-relaxation of the activation energy E a = 28 kJ/mol and (ii) β-relaxation that senses the density increase and originates most probably from the intermolecular movements (E a = 77 kJ/mol at 480 MPa). The results of high-pressure studies have also revealed the validity of isochronal superposition and decoupling between α-relaxation and translational motions of charged species reflected by dc conductivity. The latter one was found to intensify with increasing pressure. Finally, we also show that the presence of quite complex inter- and intramolecular hydrogen bonds might still exert some subtle effect on the molecular dynamics of supercooled fenofibrate.

Fossil biomolecules from an endogenous source were previously identified in Cretaceous to Pleistocene fossilized bones, the evidence coming from molecular analyses. These findings, however, were called into question and an alternative hypothesis of the invasion of the bone by bacterial biofilm was proposed. Herewith we report a new finding of morphologically preserved blood-vessel-like structures enclosing organic molecules preserved in iron-oxide-mineralized vessel walls from the cortical region of nothosaurid and tanystropheid (aquatic and terrestrial diapsid reptiles) bones. These findings are from the Early/Middle Triassic boundary (Upper Roetian/Lowermost Muschelkalk) strata of Upper Silesia, Poland. Multiple spectroscopic analyses (FTIR, ToF-SIMS, and XPS) of the extracted "blood vessels" showed the presence of organic compounds, including fragments of various amino acids such as hydroxyproline and hydroxylysine as well as amides, that may suggest the presence of collagen protein residues. Because these amino acids are absent from most proteins other than collagen, we infer that the proteinaceous molecules may originate from endogenous collagen. The preservation of molecular signals of proteins within the "blood vessels" was most likely made possible through the process of early diagenetic iron oxide mineralization. This discovery provides the oldest evidence of in situ preservation of complex organic molecules in vertebrate remains in a marine environment.

New styrylquinoline derivatives with their photophysical constants are described. The synthesis was achieved via Sonogashira coupling using the newly developed heterogeneous nano-Pd/Cu catalyst system, which provides an efficient synthesis of high purity products. The compounds were tested in preliminary fluorescent microscopy studies to in order to identify their preferable cellular localization, which appeared to be in the lipid cellular organelles. The spectroscopic properties of the compounds were measured and theoretical TD-DFT calculations were performed. A biological analysis of the quinolines that were tested consisted of cytotoxicity assays against normal human fibroblasts and colon adenocarcinoma cells. All of the compounds that were studied appeared to be safe and indifferent to cells in a high concentration range. The presented results suggest that the quinoline compounds that were investigated in this study may be valuable structures for development as fluorescent dyes that could have biological applications.

Fourier Transform Infrared Spectroscopy and Broadband Dielectric Spectroscopy are combined to trace kinetics of mutarotation in L-fucose. After quenching molten samples down to temperatures between T = 313 K and 328 K, the concentrations of two anomeric species change according to a simple exponential time dependence, as seen by an increase in absorbance of specific IR-vibrations. In contrast, the dielectric spectra reveal a slowing down of the structural (α-) relaxation process according to a stretched exponential time dependence (stretching exponent of 1.5 ± 0.2). The rates of change in the IR absorption for α- and β-fucopyranose are (at T = 313 K) nearly one decade faster than that of the intermolecular interactions as measured by the shift of the α-relaxation. This reflects the fact that the α-relaxation monitors the equilibration at a mesoscopic length scale, resulting from fluctuations in the anomeric composition.