Search

Hydroxycinnamoyl shikimates were reported in 2005 to be intermediates in monolignol biosynthesis. 3-Hydroxylation of p-coumarate, originally thought to occur via coumarate 3-hydroxylase (C3H) from p-coumaric acid or its CoA thioester, was revealed to be via the action of coumaroyl shikimate 3′-hydroxylase (C3′H) utilizing p-coumaroyl shikimate as the substrate, itself derived from p-coumaroyl-CoA via hydroxycinnamoyl-CoA: shikimate hydroxycinnamoyltransferase (HCT). The same HCT was conjectured to convert the product, caffeoyl shikimate, to caffeoyl-CoA to continue on the pathway starting with its 3-O-methylation. At least in some plants, however, a more recently discovered caffeoyl shikimate esterase (CSE) enzyme hydrolyzes caffeoyl shikimate to caffeic acid from which it must again produce its CoA thioester to continue on the monolignol biosynthetic pathway. HCT and CSE are therefore monolignol biosynthetic pathway enzymes that have provided new opportunities to misregulate lignification. To facilitate studies into the action and substrate specificity of C3H/C3′H, HCT, and CSE enzymes, as well as for metabolite authentication and for enzyme characterization, including kinetics, a source of authentic substrates and products was required. A synthetic scheme starting from commercially available shikimic acid and the four key hydroxycinnamic acids (p-coumaric, caffeic, ferulic, and sinapic acid) has been developed to provide this set of hydroxycinnamoyl shikimates for researchers.

The hydroxycinnamic acids p‐coumaric acid (pCA) and ferulic acid (FA) add diversity to the portfolio of products produced by using grass‐fed lignocellulosic biorefineries. The level of lignin‐bound pCA in Zea mays was modified by the alteration of p‐coumaroyl‐CoA monolignol transferase expression. The biomass was processed in a lab‐scale alkaline‐pretreatment biorefinery process and the data were used for a baseline technoeconomic analysis to determine where to direct future research efforts to couple plant design to biomass utilization processes. It is concluded that future plant engineering efforts should focus on strategies that ramp up accumulation of one type of hydroxycinnamate (pCA or FA) predominantly and suppress that of the other. Technoeconomic analysis indicates that target extraction titers of one hydroxycinnamic acid need to be >50 g kg−1 biomass, at least five times higher than observed titers for the impure pCA/FA product mixture from wild‐type maize. The technical challenge for process engineers is to develop a viable process that requires more than 80 % reduction of the isolation costs., Stream on: A competitive lignocellulosic biorefinery will need to produce multiple product streams that include liquid fuel, solid fuel, and commodity chemicals. In this study, some key parameters are identified for the extraction of the valuable commodity chemicals p‐coumaric acid and ferulic acid from one of the waste streams in an alkaline‐pretreatment‐based biorefinery.

Syringyl (S) lignin content and the syringyl-to-guaiacyl (S/G) lignin ratio are important characteristics of wood and lignocellulosic biomass. Although numerous methods are available for estimating S lignin units and the S/G ratio, in this work, a new method based on Raman spectroscopy that uses the 370 cm-1 Raman band-area intensity (370-area) was developed. The reliability of the Raman approach for determining S content was first tested by the quantitative analysis of three syringyl lignin models by sampling them, separately, in dioxane and in Avicel. Good linear correlations between the 370 cm-1 intensity and model concentrations were obtained. Next, the percent syringyl (%S) lignin units in various woods were measured by correlating the 370 cm-1 Raman intensity data with values of S units in lignin determined by three regularly used methods, namely, thioacidolysis, DFRC, and 2D-HSQC NMR. The former two methods take into account only the monomers cleaved from β-O-4-linked lignin units, whereas the NMR method reports S content on the whole cell wall lignin. When the 370-area intensities and %S values from the regularly used methods were correlated, good linear correlations were obtained ( R2 = 0.767, 0.731, and 0.804, respectively, for the three methods). The correlation with the highest R2, i.e., with the 2D NMR method, is proposed for estimating S units in wood lignins by Raman spectroscopy as, in principle, both represent the whole cell wall lignin and not just the portion of lignin that gets cleaved to release monomers. The Raman analysis method is quick, uses minimal harmful chemicals, is carried out nondestructively, and is insensitive to the wet or dry state of the sample. The only limitations are that the sample of wood contains at least 30% S and not be significantly fluorescent, although the latter can be mitigated in some cases.

Summary To what degree can the lignin subunits in a monocot be derived from monolignol ferulate (ML‐FA) conjugates? This simple question comes with a complex set of variables. Three potential requirements for optimizing ML‐FA production are as follows: (1) The presence of an active FERULOYL‐CoA MONOLIGNOL TRANSFERASE (FMT) enzyme throughout monolignol production; (2) Suppression or elimination of enzymatic pathways competing for monolignols and intermediates during lignin biosynthesis; and (3) Exclusion of alternative phenolic compounds that participate in lignification. A 16‐fold increase in lignin‐bound ML‐FA incorporation was observed by introducing an AsFMT gene into Brachypodium distachyon. On its own, knocking out the native p‐COUMAROYL‐CoA MONOLIGNOL TRANSFERASE (BdPMT) pathway that competes for monolignols and the p‐coumaroyl‐CoA intermediate did not change ML‐FA incorporation, nor did partial loss of CINNAMOYL‐CoA REDUCTASE1 (CCR1) function, which reduced metabolic flux to monolignols. However, stacking AsFMT into the Bdpmt‐1 mutant resulted in a 32‐fold increase in ML‐FA incorporation into lignin over the wild‐type level.

As interest in biomass utilization has grown, the manipulation of lignin biosynthesis has received significant attention, such that recent work has demanded more robust lignin analytical methods. As the derivatization followed by reductive cleavage (DFRC) method is particularly effective for structurally characterizing natively acylated lignins, we used an array of synthetic β-ether γ-acylated model compounds to determine theoretical yields for all monolignol conjugates currently known to exist in lignin, and we synthesized a new set of deuterated analogs as internal standards for quantification using GC-MS/MS. Yields of the saturated ester conjugates ranged from 40 to 90 %, and NMR analysis revealed the presence of residual unsaturated conjugates in yields of 20 to 35 %. In contrast to traditional selected-ion-monitoring, we demonstrated the superior sensitivity and accuracy of multiple-reaction-monitoring detection methods, and further highlighted the inadequacy of traditional standards relative to isotopically labeled analogs.

Commelinid monocotyledons are a monophyletic clade differentiated from other monocotyledons by the presence of cell wall-bound ferulate and p-coumarate. The Poaceae, or grass family, is a member of this group, and most of the p-coumarate in the cell walls of this family acylates lignin. Here, we isolated and examined lignified cell wall preparations from 10 species of commelinid monocotyledons from nine families other than Poaceae, including species from all four commelinid monocotyledon orders (Poales, Zingiberales, Commelinales, and Arecales). We showed that, as in the Poaceae, lignin-linked p-coumarate occurs exclusively on the hydroxyl group on the γ-carbon of lignin unit side chains, mostly on syringyl units. Although the mechanism of acylation has not been studied directly in these species, it is likely to be similar to that in the Poaceae and involve BAHD acyl-coenzyme A:monolignol transferases.

Understanding the chemical structure of lignin in willow bark is an indispensable step to design how to separate its fiber bundles. The whole cell wall and enzyme lignin preparations sequentially isolated from ball-milled bark, inner bark, and wood were comparatively investigated by nuclear magnetic resonance (NMR) spectroscopy and three classical degradative methods, i.e., alkaline nitrobenzene oxidation, derivatization followed by reductive cleavage, and analytical thioacidolysis. All results demonstrated that the guaiacyl (G) units were predominant in the willow bark lignin over syringyl (S) and minor p-hydroxyphenyl (H) units. Moreover, the monomer yields and S/G ratio rose progressively from bark to inner bark and wood, indicating that lignin may be more condensed in bark than in other tissues. Additionally, major interunit linkage substructures (β-aryl ethers, phenylcoumarans, and resinols) together with cinnamyl alcohol end groups were relatively quantitated by two-dimensional NMR spectroscopy. Bark and inner bark were rich in pectins and proteins, which were present in large quantities and also in the enzyme lignin preparations.

12 páginas.-- 5 figuras.-- 5 tablas.-- 74 referencias, Protein polymers exist in every plant cell wall preparation, and they interfere with lignin characterization and quantification. Here, we report the structural characterization of the residual protein peaks in 2D NMR spectra in corn cob and kenaf samples and note that aromatic amino acids are ubiquitous and evident in spectra from various other plants and tissues. The aromatic correlations from amino acid residues were identified and assigned as phenylalanine and tyrosine. Phenylalanine's 3/5 correlation peak is superimposed on the peak from typical lignin p-hydroxyphenyl (H-unit) structures, causing an overestimation of the H units. Protein contamination also occurs when using cellulases to prepare enzyme lignins from virtually protein-free wood samples. We used a protease to remove the protein residues from the ball-milled cell walls, and we were able to reveal H-unit structures in lignins more clearly in the 2D NMR spectra, providing a better basis for their estimation, This work was supported by grants from the DOE Great Lakes Bioenergy Research Center (DOE BER Office of Science DEFC02-07ER64494). We are grateful for Jane Marita for her various helpful discussions on this project. We also thank Steven Karlen for GC/MS experimental support and Kris Niemann (USDFRC) for assistance with nitrogen analysis.

Caffeoyl shikimate esterase (CSE) was recently shown to play an essential role in lignin biosynthesis in Arabidopsis (Arabidopsis thaliana) and later in Medicago truncatula. However, the general function of this enzyme was recently questioned by the apparent lack of CSE activity in lignifying tissues of different plant species. Here, we show that down-regulation of CSE in hybrid poplar (Populus tremula x Populus alba) resulted in up to 25% reduced lignin deposition, increased levels of p-hydroxyphenyl units in the lignin polymer, and a relatively higher cellulose content. The transgenic trees were morphologically indistinguishable from the wild type. Ultra-high-performance liquid chromatography-mass spectrometry-based phenolic profiling revealed a reduced abundance of several oligolignols containing guaiacyl and syringyl units and their corresponding hydroxycinnamaldehyde units, in agreement with the reduced flux toward coniferyl and sinapyl alcohol. These trees accumulated the CSE substrate caffeoyl shikimate along with other compounds belonging to the metabolic classes of benzenoids and hydroxycinnamates. Furthermore, the reduced lignin amount combined with the relative increase in cellulose content in the CSE down-regulated lines resulted in up to 62% more glucose released per plant upon limited saccharification when no pretreatment was applied and by up to 86% and 91% when acid and alkaline pretreatments were used. Our results show that CSE is not only important for the lignification process in poplar but is also a promising target for the development of improved lignocellulosic biomass crops for sugar platform biorefineries.

Willow bark is a rich source of heterogeneous polyphenolic compounds and a potential feedstock for biorefinery processes aiming at chemicals and fiber production. Here, mild hot water treatment of willow hybrid Karin was studied to find a practical means of isolating its non-cell-wall components for their utilization in a willow biorefinery proposed to aid valorization of the willow biomass. A short aqueous treatment of the bark at 80 °C liberated the extract in >20% yield under unpressurized conditions. The extract was characterized using mainly gas chromatography-mass spectrometry and one- and two-dimensional NMR techniques. Authentic analytes were applied to confirm the identification and quantification of the main components that were picein, (+)-catechin, triandrin, glucose, and fructose. Fructose was converted into 5-hydroxymethylfurfural in an acidic treatment which led to its condensation with the phenolic components and formation of a recalcitrant precipitate that should be avoided. © 2018 American Chemical Society.

Down-regulation of CSE in poplar reduces lignin content, leading to a higher glucose release per plant upon saccharification.

Grass lignins contain substantial amounts of p-coumarate (pCA) that acylate the side-chains of the phenylpropanoid polymer backbone. An acyltransferase, named p-coumaroyl-CoA:monolignol transferase (OsPMT), that could acylate monolignols with pCA in vitro was recently identified from rice. In planta, such monolignol-pCA conjugates become incorporated into lignin via oxidative radical coupling, thereby generating the observed pCA appendages; however p-coumarates also acylate arabinoxylans in grasses. To test the authenticity of PMT as a lignin biosynthetic pathway enzyme, we examined Brachypodium distachyon plants with altered BdPMT gene function. Using newly developed cell wall analytical methods, we determined that the transferase was involved specifically in monolignol acylation. A sodium azide-generated Bdpmt-1 missense mutant had no (

© 2016 Petrik, Cass, Padmakshan, Foster, Vogel, Karlen, Ralph and Sedbrook. Utility vectors with promoters that confer desired spatial and temporal expression patterns are useful tools for studying gene and cellular function and for industrial applications. To target the expression of DNA sequences of interest to cells forming plant secondary cell walls, which generate most of the vegetative biomass, upstream regulatory sequences of the Brachypodium distachyon lignin biosynthetic gene BdPMT and the cellulose synthase genes BdCESA7 and BdCESA8 were isolated and cloned into binary vectors designed for Agrobacterium-mediated transformation of monocots. Expression patterns were assessed using the β-glucuronidase gene GUSPlus and X-glucuronide staining. All three promoters showed strong expression levels in stem tissue at the base of internodes where cell wall deposition is most active, in both vascular bundle xylem vessels and tracheids, and in interfascicular tissues, with expression less pronounced in developmentally older tissues. In leaves, BdCESA7 and BdCESA8 promoter-driven expression was strongest in leaf veins, leaf margins, and trichomes; relatively weaker and patchy expression was observed in the epidermis. BdPMT promoter-driven expression was similar to the BdCESA promoters expression patterns, including strong expression in trichomes. The intensity and extent of GUS staining varied considerably between transgenic lines, suggesting that positional effects influenced promoter activity. Introducing the BdPMT and BdCESA8 Open Reading Frames into BdPMT and BdCESA8 utility promoter binary vectors, respectively, and transforming those constructs into Brachypodium pmt and cesa8 loss-of-function mutants resulted in rescue of the corresponding mutant phenotypes. This work therefore validates the functionality of these utility promoter binary vectors for use in Brachypodium and likely other grass species. The identification, in Bdcesa8-1 T-DNA mutant stems, of an 80% reduction in crystalline cellulose levels confirms that the BdCESA8 gene is a secondary-cell-wall-forming cellulose synthase.

Plants have convergently evolved to use monolignol ferulate conjugates to produce lignins containing chemically labile backbone esters., Angiosperms represent most of the terrestrial plants and are the primary research focus for the conversion of biomass to liquid fuels and coproducts. Lignin limits our access to fibers and represents a large fraction of the chemical energy stored in plant cell walls. Recently, the incorporation of monolignol ferulates into lignin polymers was accomplished via the engineering of an exotic transferase into commercially relevant poplar. We report that various angiosperm species might have convergently evolved to natively produce lignins that incorporate monolignol ferulate conjugates. We show that this activity may be accomplished by a BAHD feruloyl–coenzyme A monolignol transferase, OsFMT1 (AT5), in rice and its orthologs in other monocots.

4 páginas.-- 4 figuras.-- 1 tabla.-- 27 referncias.--- El pdf. del Material Suplementarío tiene 29 páginas. Contiene: Materials and Methods.-- Supplementary Text.-- Figs. S1 to S9.-- Tables S1 to S4.-- 39 References, Redesigning lignin, the aromatic polymer fortifying plant cell walls, to be more amenable to chemical depolymerization can lower the energy required for industrial processing. We have engineered poplar trees to introduce ester linkages into the lignin polymer backbone by augmenting the monomer pool with monolignol ferulate conjugates. Herein, we describe the isolation of a transferase gene capable of forming these conjugates and its xylem-specific introduction into poplar. Enzyme kinetics, in planta expression, lignin structural analysis, and improved cell wall digestibility after mild alkaline pretreatment demonstrate that these trees produce the monolignol ferulate conjugates, export them to the wall, and use them during lignification. Tailoring plants to use such conjugates during cell wall biosynthesis is a promising way to produce plants that are designed for deconstruction.