Search

The main objective of a series of our researches is to develop a novel acoustic-based method for activation of biochar. This study investigates the capability of biochar in adsorbing Ni(II) as a hazardous contaminant and aims at enhancing its adsorption capacity by the addition of extra nitrogen and most probably phosphorous and oxygen containing sites using an ultrasono-chemical modification mechanism. To reach this objective, biochar physically modified by low-frequency ultrasound waves (USB) was chemically treated by phosphoric acid (H3PO4) and then functionalized by urea (CO(NH2)2). Cavitation induced by ultrasound waves exfoliates and breaks apart the regular shape of graphitic oxide layers of biochar, cleans smooth surfaces, and increases the porosity and permeability of biochar’s carbonaceous structure. These phenomena synergistically combined with urea functionalization to attach the amine groups onto the biochar surface and remarkably increased the adsorption of Ni(II). It was found that the modified biochar could remove > 99% of 100 mg Ni(II)/L in only six hours, while the raw biochar removed only 73.5% of Ni(II) in twelve hours. It should be noted that physical treatment of biochar with ultrasound energy, which can be applied at room temperature for a very short duration, followed by chemical functionalization is an economical and efficient method of biochar modification compared with traditional methods, which are usually applied in a very severe temperature (>873 K) for a long duration. Such modified biochars can help protect human health from metal-ion corrosion of degrading piping in cities with aging infrastructure.

The present study examined the effect of pyrolysis temperature on the physicochemical properties of biochar, activation process and carbon capture. Two different categories of biochars were synthesized from herbaceous (miscanthus and switchgrass) or agro-industrial (corn stover and sugarcane bagasse) feedstock under four different pyrolysis temperatures- 500, 600, 700 and 800 oC. The synthesized biochars underwent sono-amination activation comprising low-frequency acoustic treatment followed by amine functionalization to prepare adsorbents for CO2 capture. As per the elemental analysis, the elevated pyrolysis temperature resulted in increased %C and %ash contents and reduced %N contents of biochar. The textural analysis exhibited almost 3-times enhancement of micro surface area and pore volume upon increasing the pyrolysis temperature from 500 to 700 oC, though further increase to 800 oC reduced the micro-porosity and the surface area. The intermediate temperatures of 600 and 700 oC revealed the highest interactions with ultrasound-amination, which significantly intensified CO2 adsorption. Accordingly, the CO2 capture capacity of sono-aminated biochars synthesized at 600 and 700 oC were almost 200% greater than that of raw biochars. There were 127-159% and 115-151% increases in adsorption capacity of biochars synthesized at 800 and 500 oC upon ultrasono-amine functionalization. Miscanthus biochar synthesized at 700 oC and treated sono-chemically demonstrated the highest adsorption ability of 2.89 mmol/g at 70 oC and 0.10 atm partial pressure, which is 211% higher than its pristine condition. The superior adsorption capacity of miscanthus (at 700 oC) can be attributed to its large surface area (324.35 m2/g), high carbon content (84%), and low ash content (4.9%), as well as its %N content after sono-amination that was twice that of raw char.

The scope of solid-state transitions, from melting temperatures down to 4.2 K, is described for six systems: KxVF3, RbxVF3, CsxVF3, KxCrF3, RbxCrF3, and CsxCrF3 (for x = 0.0 to 1.0). Connections are drawn between the compounds’ compositions and structures with the various transitions and ordering events. Upon solidification from the melt and gradual cooling to room temperature, a sequential descent of symmetry appears to occur, from high-symmetry perovskite phases, through possible reconstructive transitions, to phases designated α, β, and δ, within which ionic ordering finally sets in, forming many new lower-symmetry structures. Many stable new structures are seen at room temperature. Finally, at cryogenic temperatures, magnetic ordering sets in. Other anomalies for these systems are also described. The analysis underscores the overall correspondence of structure, composition, and magnetic properties in these compounds. This lowering of symmetry mirrors what has been chronicled for oxygen-bearing perovskites that have yielded so many high-temperature ceramic superconductors.

The objectives of a series of our researches are to determine the feasibility of applying ultrasonic pretreatment prior to biochar gasification. As per the initial results, the heating value (HV) of biochar significantly increased after acoustic treatment in water with dissolved CO2 (AIChE Journal, 2014;60:1054–1065). Accordingly, emphasis of the current work is placed on the parameters governing the HV of biochar in the early stage of the treatment. Switchgrass and miscanthus biochars were treated under different conditions. The reactant ratio, biochar:water:CO2, exhibited profound impacts on the synergism. The highest (but not yet systematically optimized) ratio of HV increase (or HV Gain, HG) to ultrasound energy supplied (ES) takes place when biochar-to-water ratio, or BC:W, equals 0.06 g/ml. The observed HG/ES is about 10, suggesting that the energy consumption is only a fraction of the acoustic energy supplied. Miscanthus biochar’s HV increases by up to 4.6% after treatment at 5% amplitude for 135 s (HG = 33 cal/g). For the same run, miscanthus biochar's H content increased by 42.7%. Changes in HV can be mediated by mineral leaching, C or H fixation, or O content loss. Mineral leaching is influenced by pH and CO2 concentration. CO2 and water are the sole contributors to C and H gains, respectively. CO2 concentration in the solution during the treatment is also affected by mass transfer limitations, ultrasound power, and design of the three-phase reactor. Increasing the BC:W ratio initially enhances the cavitation nuclei on the fluid/solid surface, and therefore sonolysis. The subsequent decrease in HV with increasing BC:W may be due to the limitation in ultrasound penetration and H supply from water. Carbon and hydrogen fixation may be connected to the formation of H2, CO, formic acid, formaldehyde, and associated radicals during sonolysis of aqueous CO2.

The compounds KZnTiF6, KZnVF6, KVScF6, KCrScF6, and KMnScF6 are fluoride analogs of Tetragonal Tungsten Bronze. M2+–M3+ ionic ordering in these fluorides provided systems which contained linear trinuclear complexes of their respective paramagnetic ions. Magnetic coupling within these linear trimers occurred below 100 K in each of the five systems. Derived magnetic susceptibility equations were fitted to observed magnetic susceptibilities for each of the possible spin systems: KZnTiF6 (S=1/2), J/k=−114 K; KZnVF6 (S=1), J/k=−39 K; KVScF6 (S=3/2), J/k=−16 K; KCrScF6 (S=2), J/k=−4 K; and KMnScF6 (S=5/2), J/k=−7.5 K.

A{sub x}VF{sub 3} (A=K, Rb, Cs; x=0-1.0) and A{sub x}CrF{sub 3} compounds were sealed inside high-temperature DTA molybdenum sample cups using electron beam welding techniques. Melting temperatures of the A{sub x}VF{sub 3} compounds ranged from 1050 to 1400 deg. C; those of A{sub x}CrF{sub 3} from 850 to 1200 deg. C. Reconstructive transitions were observed for A{sub x}VF{sub 3} compounds between 650 and 950 deg. C, and for A{sub x}CrF{sub 3} compounds between 550 and 825 deg. C. A displacive transition was observed to occur in VF{sub 3} at 490 deg. C. Order-disorder transitions were determined by X-ray diffraction techniques. In the A{sub x}VF{sub 3} compounds, electronic ordering and ordering of partially filled A{sup +} sites were observed to occur between 100 and 300 deg. C. Ordering phenomena in the A{sub x}CrF{sub 3} compounds (in addition to electronic ordering and ordering of partially filled A{sup +} sites) included Jahn-Teller cooperative ordering. These compounded transitions occurred between 300 and 500 deg. C.

The isomerization of tricyclo[3.1.0.02,6]hexane to 1,3-cyclohexadiene was studied using ab initio calculations at the multiconfiguration and single-configuration levels of theory. Single-point energy calculations were also performed using the MCQDPT2 and CCSD(T) methods. The isomerization process was found to proceed through an (E,Z)-1,3-cyclohexadiene intermediate following a concerted, asynchronous pathway characterized as a conrotatory ring opening of the bicyclobutane moiety. The second step involves rotation about the trans double bond resulting in the (Z,Z)-1,3-cyclohexadiene product. The rate determining step is the first one, with an activation barrier of about 43 kcal mol-1. The activation barrier of the second step was found to be only 3 kcal mol-1. A second concerted pathway was found leading directly to (Z,Z)-1,3-cyclohexadiene but with an activation barrier of 54 kcal mol-1. A multiconfiguration based wave function is necessary to properly describe the potential energy surface of the reaction.

Pyrenes undergo initial electrophilic substitution in the 1 position; a second substitution typically occurs in the 3, 6, or 8 positions. We sought a pyrene with synthetically useful handles in the unusual 2,7 substitution pattern. To that end, 7-amino-2-pyrenecarboxylic acid was prepared by partial reduction of pyrene to 4,5,9,10-tetrahydropyrene, Friedel−Crafts acylation in the 2 position, and conversion to 2-carbethoxytetrahydropyrene through the haloform reaction and esterification. Nitration of the ester proceeded in the 7 position; rearomatization, reduction of the nitro group, and saponification gave the title compound.

Donor-σ-Acceptor (D-σ-A) molecules, arrayed in a monolayer between electrodes, can serve as molecular rectifiers. Using perylene-3,4,9,10-tetracarboxylic bisimide (PBI) as the acceptor allows the attachment of the donor group to one imide nitrogen and a solubilizing swallowtail, normally a long (e.g., C(19)) alkane connected at midchain, on the other. Such an alkyl tail facilitates the formation of Langmuir-Blodgett (LB) monolayers. We have employed several modified swallowtails to make new D-σ-A molecules: poly(ethylene glycol) (PEG) swallowtails with 6 ether oxygens or with 4 ether oxygens to promote hydrophilicity in orienting LB monolayers, and alkyl swallowtails ending with sulfur anchors (thioacetate, thiol, or methyl disulfide) to stabilize attachment of the D-σ-A molecules to gold electrodes. The preparation and characterization of D-σ-A molecules containing combinations of these swallowtails with pyrene, ferrocene, and tetramethylphenylenediamine donor groups is described.

We report spectroscopic characterization and unimolecular rectification (asymmetric electrical conduction) measurements of three donor-sigma-acceptor (D-sigma-A) compounds N-(10-nonadecyl)-N-(1-pyrenylmethyl)perylene-3,4,9,10-bis(dicarboximide) (1), N-(10-nonadecyl)-N-(4-[1-pyrenyl]butyl)perylene-3,4,9,10-bis(dicarboximide) (2), and N-(10-nonadecyl)-N-(2-ferrocenylethyl)perylene-3,4,9,10-bis(dicarboximide) (3). These molecules were arranged as one-molecule thick Langmuir-Blodgett monolayers between Au electrodes. In such an "Au | D-sigma-A | Au" sandwich, molecule 1 is a unimolecular rectifier, with rather small rectification ratios (between 2 and 3 at +/-1 V) that decrease upon cycling. Molecule 2 does not rectify. Molecule 3 rectifies, with a rectification ratio of between 14 and 28 at +/-1 V; the through-film rectification and currents persist, even with scans of +/-2 V, for up to 40 cycles of measurement. Qualitative arguments, based on a two-level rectification mechanism, are consistent with the current asymmetries observed in the monolayers of 1 and 3.

Donor-sigma-acceptor-lipid molecules were prepared by using perylenetetracarboxylic diimide as the acceptor, starting from perylenetetracarboxylic dianhydride. One imide nitrogen was attached to a "swallowtail" lipid (a long alkyl tail connected at midchain), which imparts enough solubility to make the system tractable and provides a lipophilic region suitable for promoting Langmuir-Blodgett monolayer formation. The other imide link was to a donor group (pyrene, ferrocene, tetramethylphenylenediamine, phenyl) through a short alkyl sigma bridge. Features of the 1H and 13C NMR spectra of swallowtailed perylenediimides are interpreted as resulting from restricted rotation about the imide C-N bond; the 13C NMR spectra and stereochemistry of these molecules are contrasted with the case of the related bis-(2,5-di-tert-butylphenyl)perylenetetracarboxylic diimide.

The circadian rhythm of conidiation (spore formation) in Neurospora crassa is known to be temperature compensated, that is, the period is only slightly affected by the incubation temperature. Thus, the Q10 (the relative rate enhancement corresponding to a 10 degrees C rise in temperature) of the rhythm of the bd csp strain from 14 to 30 degrees C was 1.1, whereas the Q10 of the uncompensated growth rate in the same interval was 2.4. A mutation at the cel locus resulted in loss of the temperature-compensation property in cultures grown below 22 degrees C. The Q10 of the rhythm below 22 degrees C was 2.2, and periods of about 40 hr were observed. In contrast, the Q10 of the rhythm above 22 degrees C was 1.1, with circadian periods of 18-21 hr. Thus, cel displayed a threshold temperature or "break point" for the temperature compensation of its rhythm. Supplementation of cel strains, which require fatty acids, with unsaturated or short-chain fatty acids raised the threshold temperature to 26 degrees C, whereas supplementation with long-chain saturated fatty acids lowered it to 18 degrees C. These data suggest a role for fatty acids, as liquid components or as cellular metabolites, in the mechanism of temperature compensation.

Periodation par l'acide periodique et l'iode dans H 2 SO 4 de benzene, nitro- et -chloro-benzenes, acide benzoique, anhydride phtalique et toluene

Employing a fatty acid-requiring strain (bd csp cel) of Neurospora crassa, the 21.5-h period of the circadian spore-forming rhythm was manipulated by fatty acid supplementation. The addition to the medium of an unsaturated fatty acid (oleic, linoleic, or linolenic acid) lengthened the period to 26, 40, or 33 h, respectively. Ther period-lengthening effect of linoleic acid was proportional to its concentration up to 1.3 X 10(-4) M, and also was reversed by the addition to the medium of a saturated fatty acid, palmitic acid. None of these period-lengthening effects was observed in the prototrophic strain (bd csp cel+).