Search

Lignin can affect the enzymatic hydrolysis efficiency of lignocellulose. In this study, the lignin isolated from sugarcane bagasse (SCB) pretreated with p-toluenesulfonic acid (PL) was firstly aminated, and then the effects of PL and aminated PL (APL) on the bagasse enzymatic hydrolysis efficiency (EHE) were investigated. The results showed that the addition of PL and APL promoted the EHE, and EHE with APL (73.82 %) was higher than PL (51.39 %). To explore the reason, the data were further analyzed including cellulase adsorption capacity, enzyme activity, cellulase-lignin interaction, and molecular docking. It was found that APL adsorbed more cellulase (27.83 mg protein/g lignin) than PL (4.96 mg protein/g lignin), resulting from the greater interaction force and lower binding free energy between APL and cellulase. The addition of APL more remarkably enhanced the cellobiohydrolase and endoglucanase activities than PL due to more effectively inducing cellulase conformation optimization. [Display omitted] • Enzymatic hydrolysis of cellulosic substrate was enhanced from 45.83 % to 73.82 % by aminated lignin. • Aminated lignin adsorbed more cellulase molecules. • Activities of cellobiohydrolase (CBH) and endoglucosidase (EG) were promoted by aminated lignin. • Aminated lignin owned lower binding energy with cellulase. [ABSTRACT FROM AUTHOR]

The production of cellulolytic enzymes in response to inducible carbon sources is mainly regulated at the transcriptional level in filamentous fungi. We have identified a cellobiose-response regulator (ClbR) controlling the expression of cellulolytic enzyme-encoding genes in Aspergillus aculeatus. However, the engineering potential of combining the deletion of transcriptional repressors with the overexpression of transcriptional activators to enhance enzyme production has not been analyzed. Here, we investigated the effect of the deletion of the transcriptional repressor creA and the overexpression of the transcriptional activator clbR in enzyme production in A. aculeatus. Here, we verified that a combination of creA deletion and clbR overexpression (Δc&OE) improved cellulase, β-1,4-xylanase, and β-glucosidase production. Cellulase and β-1,4-xylanase production increased 3.4- and 8.0-fold in Δc&OE compared with the host strain (MR12) at 96-h incubation, respectively. β-Glucosidase production in Δ creA and Δc&OE increased approximately 5.0-fold compared with that in MR12 at 240-h incubation. Transcriptional analysis revealed that the increase in enzyme production was due to increased expression of cellobiohydrolase, endo-β-1,4-glucanase, β-1,4-xylanase, and β-glucosidase 1 (bgl1). Interestingly, bgl1 expression in Δ creA increased in a dose-dependent manner in response to glucose. Thus, combinational manipulation of transcription factors improved cellulase, xylanase, and β-glucosidase production in A. aculeatus. [ABSTRACT FROM AUTHOR]

The objective of this study was to assess the cellulase production of four fungi: Aspergillus terreus NIH2624, Aspergillus clavatus NRRL1, Aspergillus versicolor CBS583.65 and Aspergillus phoenicis ATCC3157, under submerged cultivation conditions. When these fungi were cultured in shake flasks using Mandels and Weber's minimal medium with 1% sugarcane bagasse as a carbon source and 1.8 g/L of rice bran extract as a nitrogen source, A. terreus showed maximum cellulase production (filter paper activity (FPase) 3.35 U/mL; carboxymethyl cellulase activity (CMCase) 1.69 U/mL). Consequently, A. terreus was selected for the optimization study for cellulase production. Among the different tested carbon sources, A. terreus showed higher CMCase activity when it was cultivated on delignified sugarcane bagasse (1.64 U/mL) and higher FPase activity on sugarcane straw (7.95 U/mL). Regarding the nitrogen sources, the maximum FPase activity was observed when using rice bran (FPase, 8.90 U/mL) and soybean meal (FPase, 9.63 U/mL). The optimized fermentation medium (minimal medium with delignified sugarcane bagasse and rice bran as carbon and nitrogen sources, respectively) resulted in an enzymatic cocktail mainly composed of xylanases, with a maximum activity of 1701.85 U/mL for beechwood xylan, 77.12 U/mL for endoglucanase and 21.02 U/mL for cellobiohydrolase. Additionally, the enzymatic cocktail showed efficient activities for β-glucosidase, β-xylanase, arabinofuranosidase and lytic polysaccharide monoxygenases (LPMOs). This cellulase enzyme solution has the potential to efficiently hydrolyze lignocellulosic biomass, producing second-generation sugars in biorefineries. [ABSTRACT FROM AUTHOR]

The escalating prevalence of drug-resistant pathogens not only jeopardizes the effectiveness of existing treatments but also increases the complexity and severity of infectious diseases. Escherichia coli is one the most common pathogens across all healthcare-associated infections. Enzymatic treatment of bacterial biofilms, targeting extracellular polymeric substances (EPS), can be used for EPS degradation and consequent increase in susceptibility of pathogenic bacteria to antibiotics. Here, we characterized three recombinant cellulases from Thermothelomyces thermophilus: a cellobiohydrolase I (TthCel7A), an endoglucanase (TthCel7B), and a cellobiohydrolase II (TthCel6A) as tools for hydrolysis of E. coli and Gluconacetobacter hansenii biofilms. Using a design mixture approach, we optimized the composition of cellulases, enhancing their synergistic activity to degrade the biofilms and significantly reducing the enzymatic dosage. In line with the crystalline and ordered structure of bacterial cellulose, the mixture of exo-glucanases (0.5 TthCel7A:0.5 TthCel6A) is effective in the hydrolysis of G. hansenii biofilm. Meanwhile, a mixture of exo- and endo-glucanases is required for the eradication of E. coli 042 and clinical E. coli biofilms with significantly different proportions of the enzymes (0.56 TthCel7B:0.44 TthCel6A and 0.6 TthCel7A:0.4 TthCel7B, respectively). X-ray diffraction pattern and crystallinity index of E. coli cellulose are comparable to those of carboxymethyl cellulose (CMC) substrate. Our results illustrate the complexity of E. coli biofilms and show that successful hydrolysis is achieved by a specific combination of cellulases, with consistent recurrence of TthCel7B endoglucanase. [ABSTRACT FROM AUTHOR]

Family GH1 glycosyl hydrolases are ubiquitous in prokaryotes and eukaryotes and are utilized in numerous industrial applications, including bioconversion of lignocelluloses. In this study, hyperacidophilic archaeon Cuniculiplasma divulgatum (S5T=JCM 30642T) was explored as a source of novel carbohydrate-active enzymes. The genome of C. divulgatum encodes three GH1 enzyme candidates, from which CIB12 and CIB13 were heterologously expressed and characterized. Phylogenetic analysis of CIB12 and CIB13 clustered them with β-glucosidases from genuinely thermophilic archaea including Thermoplasma acidophilum, Picrophilus torridus, Sulfolobus solfataricus, Pyrococcus furiosus , and Thermococcus kodakarensis. Purified enzymes showed maximal activities at pH 4.5–6.0 (CIB12) and 4.5–5.5 (CIB13) with optimal temperatures at 50°C, suggesting a high-temperature origin of Cuniculiplasma spp. ancestors. Crystal structures of both enzymes revealed a classical (α/β)8 TIM-barrel fold with the active site located inside the barrel close to the C-termini of β-strands including the catalytic residues Glu204 and Glu388 (CIB12), and Glu204 and Glu385 (CIB13). Both enzymes preferred cellobiose over lactose as substrates and were classified as cellobiohydrolases. Cellobiose addition increased the biomass yield of Cuniculiplasma cultures growing on peptides by 50%, suggesting that the cellobiohydrolases expand the carbon substrate range and hence environmental fitness of Cuniculiplasma. [ABSTRACT FROM AUTHOR]

Previously, we constructed engineered M. circinelloides strains that can not only utilize cellulose, but also increase the yield of γ-linolenic acid (GLA). In the present study, an in-depth analysis of lipid accumulation by engineered M. circinelloides strains using corn straw was to be explored. When a two-stage temperature control strategy was adopted with adding 1.5% cellulase and 15% inoculum, the engineered strains led to increases in the lipid yield (up to 1.56 g per 100 g dry medium) and GLA yield (up to 274 mg per 100 g dry medium) of 1.8- and 2.3-fold, respectively, compared with the control strain. This study proved the engineered M. circinelloides strains, especially for Mc-C2PD6, possess advantages in using corn straw to produce GLA. This work provided a reference for transformation from agricultural cellulosic waste to functional lipid in one step, which might play a positive role in promoting the sustainable development of biological industry. [ABSTRACT FROM AUTHOR]

Lignocellulose was directly used in itaconic acid production by a model filamentous fungus Neurospora crassa. The promoters of two clock control genes and cellobiohydrolase 1 gene were selected for heterologous genes expression by evaluating different types of promoters. The effect of overexpression of different cellulase was compared, and it was found that expression of cellobiohydrolase 2 from Trichoderma reesei increased the filter paper activity by 2 times, the cellobiohydrolase activity by 4.5 times, and that the itaconic acid titer was also significantly improved. A bidirectional cis-aconitic acid accumulation strategy was established by constructing the reverse glyoxylate shunt and expressing the transporter MTTA, which increased itaconic acid production to 637.2 mg/L. The simultaneous optimization of cellulase and metabolic pathway was more conducive to the improvement of cellulase activity than that of cellulase alone, so as to further increase itaconic acid production. Finally, through the combination of fermentation by optimized strains and medium optimization, the titers of itaconic acid using Avicel and corn stover as substrate were 1165.1 mg/L and 871.3 mg/L, respectively. The results prove the potential of the consolidated bioprocessing that directly converts lignocellulose to itaconic acid by a model cellulase synthesizing strain. [ABSTRACT FROM AUTHOR]

Background: Filamentous fungi have long been recognized for their exceptional enzyme production capabilities. Among these, Trichoderma reesei has emerged as a key producer of various industrially relevant enzymes and is particularly known for the production of cellulases. Despite the availability of advanced gene editing techniques for T. reesei, the cultivation and characterization of resulting strain libraries remain challenging, necessitating well-defined and controlled conditions with higher throughput. Small-scale cultivation devices are popular for screening bacterial strain libraries. However, their current use for filamentous fungi is limited due to their complex morphology. Results: This study addresses this research gap through the development of a batch cultivation protocol using a microbioreactor for cellulase-producing T. reesei strains (wild type, RutC30 and RutC30 TR3158) with offline cellulase activity analysis. Additionally, the feasibility of a microscale fed-batch cultivation workflow is explored, crucial for mimicking industrial cellulase production conditions. A batch cultivation protocol was developed and validated using the BioLector microbioreactor, a Round Well Plate, adapted medium and a shaking frequency of 1000 rpm. A strong correlation between scattered light intensity and cell dry weight underscores the reliability of this method in reflecting fungal biomass formation, even in the context of complex fungal morphology. Building on the batch results, a fed-batch strategy was established for T. reesei RutC30. Starting with a glucose concentration of 2.5 g l - 1 in the batch phase, we introduced a dual-purpose lactose feed to induce cellulase production and prevent carbon catabolite repression. Investigating lactose feeding rates from 0.3 to 0.75 g (l h) - 1 , the lowest rate of 0.3 g (l h) - 1 revealed a threefold increase in cellobiohydrolase and a fivefold increase in β -glucosidase activity compared to batch processes using the same type and amount of carbon sources. Conclusion: We successfully established a robust microbioreactor batch cultivation protocol for T. reesei wild type, RutC30 and RutC30 TR3158, overcoming challenges associated with complex fungal morphologies. The study highlights the effectiveness of microbioreactor workflows in optimizing cellulase production with T. reesei, providing a valuable tool for simultaneous assessment of critical bioprocess parameters and facilitating efficient strain screening. The findings underscore the potential of microscale fed-batch strategies for enhancing enzyme production capabilities, revealing insights for future industrial applications in biotechnology. [ABSTRACT FROM AUTHOR]

Biochar (BC) was used in Trichoderma sp. culture to produce high-activity cellulase on a laboratory scale. The biochar was added into the flask before being applied to the fermenter to identify the enhancement effect and to determine the best amount of addition and the most suitable incubation period. Cellulase production was performed with a working volume of 4 L, and enzymatic hydrolysis was conducted to evaluate the saccharification ability of the enzyme. During incubation, the activities of three enzymes (Endoglucanase (EG), β-glucosidase (BGL), and cellobiohydrolase (CBH)) were measured for three days, and the cellulase activity was determined using a filter paper unit (FPU). In flask scale, EG, BGL, and CBH activities were increased by 1.4, 2.1, and 1.8 folds, respectively, and the incubation period was shortened by adding BC. In the fermenter scale, EG, BGL, and CBH activities were noticeably enhanced by 12.1, 5.8, and 7.2 folds, respectively, and FPU was 42.1 (9.8 folds). Additionally, the conversion rates of cellulose and steam exploded softwood and hardwood were 109.4%, 75.4%, and 87.3%, which were similar to a commercial enzyme (Cellic CTec II). This study demonstrated that biochar could be used to produce high-activity cellulase in a shorter period and suggests a novel method for effective cellulase production. [ABSTRACT FROM AUTHOR]

The necrotrophic fungus, Sclerotinia sclerotiorum, employs an array of cell wall-degrading enzymes (CWDEs), including cellulase, to dismantle host cell walls. However, the molecular mechanisms through which S. sclerotiorum degrades cellulose remain elusive. Here, we unveil a novel secretory cellobiohydrolase, SsdchA, characterized by a signal peptide and a Glyco_hydro_7 (GH7) domain. SsdchA exhibits a robust expression of during early infection stages. Interestingly, colony morphology and growth rates remain unaffected across the wild-type, SsdchA deletion strains and SsdchA overexpression strains on potato dextrose agar (PDA) medium. Nevertheless, the pathogenicity and cellobiohydrolase activity decreased in the SsdchA deletion strains, but enhanced in the SsdchA overexpression strains. Moreover, the heterologous expression of SsdchA in Arabidopsis thaliana leads to reduced cellulose content and heightened susceptibility to S. sclerotiorum. Collectively, our data underscore the pivotal role of the novel cellobiohydrolase SsdchA in the pathogenicity of S. sclerotiorum. [ABSTRACT FROM AUTHOR]

Glycoside hydrolase family 6 cellobiohydrolase (GH6 CBH) is a group of cellulases capable of hydrolyzing crystalline cellulose. However, the synergistic reaction of GH6 CBH with other cellulases is hindered by its relatively low thermotolerance. We previously obtained a thermotolerant double mutant, C240S/C393S, of GH6 CBH from the basidiomycete Phanerochaete chrysosporium (PcCelôA) by replacing the two free cysteine (Cys) residues, C240 and C393, with serine (Yamaguchi et al., J Appl Glycosci. 2020; 67;79-86). In the accompanying paper (Part I; Yamaguchi et al., J Appl Glycosci. 2024; 71: 55-62), we measured the temperature dependence of the activity and folding of C240S/C393S and its single mutants, C240S and C393S, and found that replacement of C393 was the major contributor to the increased thermotolerance of C240S/C393S. Here, in order to investigate the mechanism involved, we crystallized the wild-type and the mutant enzymes and compared their X-ray crystal structures. The overall structures of the wild-type and the three mutant enzymes were similar. However, C240S/C393S had the lowest relative B-factor at both the N-terminal loop (residues 172-177) and the C-terminal loop (residues 390-425). This result suggests that reduced structural fluctuation of the substrate-enclosing loops, possibly due to stronger hydrogen bonding involving C393, could account for the increased thermotolerance of C240S/C393S. [ABSTRACT FROM AUTHOR]

Cellobiohydrolase (CBH), belonging to glycoside hydrolase family 6 (GH6), plays an essential role in cellulose saccharification, but its low thermotolerance presents a challenge in improving the reaction efficiency. Based on a report that chimeric CBH II (GH6) engineered to remove non-disulfide-bonded free Cys shows increased thermotolerance, we previously mutated the two free Cys residues to Ser in GH6 CBH from the basidiomycete Phanerochaete chrysosporium (PcCelöA) and obtained a thermotolerant double mutant, C240S/C393S (Yamaguchi et al., J. Appl. Glycosci. 2020; 67: 79~86). Here, characterization of the double mutant revealed that its activity towards both amorphous and crystalline cellulose was higher than that of the wild-type enzyme at elevated temperature, suggesting that the catalytic domain is the major contributor to the increased thermotolerance. To investigate the role of each free Cys residue, we prepared both single mutants, C240S and C393S, of the catalytic domain of PcCelôA and examined their residual activity at high temperature and the temperature-dependent changes of folding by means of circular dichroism measurements and thermal shift assay. The results indicate that the C393S mutation is the main contributor to both the increased thermotolerance of C240S/C393S and the increased activity of the catalytic domain at high temperature. [ABSTRACT FROM AUTHOR]

Glycoside hydrolase family 7 (GH7) cellulases are key enzymes responsible for carbon cycling on earth through their role in cellulose degradation and constitute highly important industrial enzymes as well. Although these enzymes are found in a wide variety of evolutionarily distant organisms across eukaryotes, they exhibit remarkably conserved features within two groups: exo‐acting cellobiohydrolases and endoglucanases. However, recently reports have emerged of a separate clade of GH7 endoglucanases from protist symbionts of termites that are 60–80 amino acids shorter. In this work, we describe the first crystal structure of a short GH7 endoglucanase, RsSymEG1, from a symbiont of the lower termite Reticulitermes speratus. A more open flat surface and shorter loops around the non‐reducing end of the cellulose‐binding cleft indicate enhanced access to cellulose chains on the surface of cellulose microfibrils. Additionally, when comparing activities on polysaccharides to a typical fungal GH7 endoglucanase (Trichoderma longibrachiatum Cel7B), RsSymEG1 showed significantly faster initial hydrolytic activity. We also examine the prevalence and diversity of GH7 enzymes that the symbionts provide to the termite host, compare overall structures and substrate binding between cellobiohydrolase and long and short endoglucanase, and highlight the presence of similar short GH7s in other organisms. [ABSTRACT FROM AUTHOR]

Lignocellulosic biomass holds promise as a renewable feedstock for various applications, but its efficient conversion requires cost-effective degradation strategies. The main objective of this study was to investigate the effect of the growth conditions of Cellulomonas phragmiteti in the production of (hemi)cellulosic supernatants. To meet this aim, different lignocellulosic residues were used as carbon sources for growth using defined mineral or nutritive culture media. Cell-free culture supernatants with xylanolytic activity were produced in all the conditions evaluated, but the highest xylanase activity (15.3 U/mL) was achieved in Luria–Bertani (LB) medium containing 1% waste paper. Under these conditions, almost negligible β-glucosidase, cellobiohydrolase, β-xylosidase, and α-arabinofuranosidase activity was detected. The xylanolytic supernatant showed tolerance to salt and displayed maximal catalytic efficiency at pH 6 and 45 °C, along with good activity in the ranges of 45–55 °C and pH 5–8. As it showed good stability at 45 °C, the supernatant was employed for the hydrolysis of birchwood xylan (50 g/L) under optimal conditions, releasing 10.7 g/L xylose in 72 h. Thus, C. phragmiteti was found to produce a xylanolytic enzymatic supernatant efficiently by utilizing the cheap and abundant lignocellulosic residue of waste paper, and the produced supernatant has promising attributes for industrial applications. [ABSTRACT FROM AUTHOR]

The laccases from white-rot fungi exhibit high redox potential in treating phenolic compounds. However, their application in commercial purposes has been limited because of the relatively low productivity of the native hosts. Here, the laccase A-encoding gene lacA of Trametes sp. AH28-2 was overexpressed under the control of the strong promoter of cbh1 (P cbh1), the gene encoding the endogenous cellobiohydrolase 1 (CBH1), in the industrial workhorse fungus Trichoderma reesei. Firstly, the lacA expression cassette was randomly integrated into the T. reesei chromosome by genetic transformation. The lacA gene was successfully transcribed, but the laccase couldn't be detected in the liquid fermentation condition. Meanwhile, it was found that the endoplasmic reticulum-associated degradation (ERAD) was strongly activated, indicating that the expression of LacA probably triggered intense endoplasmic reticulum (ER) stress. Subsequently, the lacA expression cassette was added with the downstream region of cbh1 (T cbh1) to construct the new expression cassette lacA:: Δ cbh1 , which could replace the cbh1 locus in the genome via homologous recombination. After genetic transformation, the lacA gene was integrated into the cbh1 locus and transcribed. And the unfolded protein response (UPR) and ERAD were only slightly induced, for which the loss of endogenous cellulase CBH1 released the pressure of secretion. Finally, the maximum laccase activity of 168.3 U/l was obtained in the fermentation broth. These results demonstrated that the reduction of secretion pressure by deletion of endogenous protein-encoding genes would be an efficient strategy for the secretion of heterologous target proteins in industrial fungi. One-Sentence Summary The reduction of the secretion pressure by deletion of the endogenous cbh1 gene can contribute to heterologous expression of the laccase (LacA) from Trametes sp. AH28-2 in Trichoderma reesei. [ABSTRACT FROM AUTHOR]

Knockout of the transcriptional repressor Trctf1 is known to enhance the yield of cellulose-induced cellulase synthesis in Trichoderma reesei. However, different inducers possess distinct induction mechanisms, and the effect of Trctf1 on cellulase synthesis with soluble inducers remains unknown. To evaluate the effect of the Trctf1 gene on cellulase synthesis and develop a high-yielding cellulase strain, we established a CRISPR–Cas9 genome editing system in T. reesei Rut C30 using codon-optimized Cas9 protein and in vitro transcribed RNA. This study demonstrated that T. reesei ΔTrctf1 with the Trctf1 gene knocked out showed no statistically significant differences in cellulase, cellobiohydrolase, endoglucanase, and β−glucosidase production when induced with MGD (the mixture of glucose and sophorose). However, when induced with lactose, the activities of these enzymes increased by 20.2%, 12.4%, and 12.9%, respectively, with no statistically significant differences in β−glucosidase activity. The hydrolysis efficiency on corn stover of cellulases produced by T. reesei ΔTrctf1 under different inducers was not significantly different from that of wild-type cellulases, indicating that Trctf1 gene deletion has little effect on the cellulase cocktail. These findings contribute to a better understanding of the molecular mechanisms underlying the regulation of T. reesei cellulase synthesis by different soluble inducers, as well as the construction of high-yield cellulase gene−engineered strains. [ABSTRACT FROM AUTHOR]

Lignin structure is known to have significant effects on the enzymatic hydrolysis efficiency (EHE) of lignocellulose. In this study, the lignin produced from corn stalk pretreated with p-toluenesulfonic acid (PCS) was used to prepare carboxylated and quaternized lignin (CQCL) and epoxidized lignin (ECL), and the effect of the two modified lignin forms on the EHE of PCS was investigated. The results showed that EHE after adding CQCL (83.7%) was higher than adding ECL (60.8%). To explore the reasons, the unproductive adsorption, cellulase-lignin interaction, and molecular dynamics experiments were conducted. The results showed that the smaller hydrophobic interaction and electrostatic attraction between CQCL and cellulase caused less unproductive adsorption between CQCL and cellulase than ECL. Additionally, CQCL and ECL changed differently the conformations of key amino acid residues of cellobiohydrolase I and endoglucanase II, which was also responsible for the higher EHE after adding CQCL. [ABSTRACT FROM AUTHOR]

Proteins are useful chiral selectors. In order to understand the recognition mechanism and chiral discrimination, the binding of the (R)- and (S)-enantiomers of a series of designed amino alcohol inhibitors based on propranolol to cellobiohydrolase Cel7A (Trichoderma reesei) has been studied more closely. X-ray crystal structureswere determined of the protein complex with the (R)- and (S)-enantiomers of the strongest binding propranolol analogue. The combination of the structural data, thermodynamic data from capillary electrophoresis and microcalorimetry experiments and computational modelling give a clearer insight into the origin of the enantioselectivity and its opposite thermodynamic signature. The new crystal structures were used in computational molecular flexible dockings of the propranolol analogues using the program Glide. The results indicated that several water molecules in the active site were essential for the docking of the (R)-enantiomers but not for the (S)-enantiomers. The results are discussed in relation to the enantiomeric discrimination of the enzyme. Both dissociation constants (Kd values) and thermodynamical data are included to show the effects of the structural modifications in the ligand on enthalpy and entropy in relation to the enantioselectivity. [ABSTRACT FROM AUTHOR]

Background: The filamentous fungus Trichoderma reesei has been used as a host organism for the production of lignocellulosic biomass-degrading enzymes. Although this microorganism has high potential for protein production, it has not yet been widely used for heterologous recombinant protein production. Transcriptional induction of the cellulase genes is essential for high-level protein production in T. reesei; however, glucose represses this transcriptional induction. Therefore, cellulose is commonly used as a carbon source for providing its degraded sugars such as cellobiose, which act as inducers to activate the strong promoters of the major cellulase (cellobiohydrolase 1 and 2 (cbh1 and cbh2) genes. However, replacement of cbh1 and/or cbh2 with a gene encoding the protein of interest (POI) for high productivity and occupancy of recombinant proteins remarkably impairs the ability to release soluble inducers from cellulose, consequently reducing the production of POI. To overcome this challenge, we first used an inducer-free biomass-degrading enzyme expression system, previously developed to produce cellulases and hemicellulases using glucose as the sole carbon source, for recombinant protein production using T. reesei. Results: We chose endogenous secretory enzymes and heterologous camelid small antibodies (nanobody) as model proteins. By using the inducer-free strain as a parent, replacement of cbh1 with genes encoding two intrinsic enzymes (aspartic protease and glucoamylase) and three different nanobodies (1ZVH, caplacizumab, and ozoralizumab) resulted in their high secretory productions using glucose medium without inducers such as cellulose. Based on signal sequences (carrier polypeptides) and protease inhibitors, additional replacement of cbh2 with the nanobody gene increased the percentage of POI to about 20% of total secreted proteins in T. reesei. This allowed the production of caplacizumab, a bivalent nanobody, to be increased to 9.49-fold (508 mg/L) compared to the initial inducer-free strain. Conclusions: In general, whereas the replacement of major cellulase genes leads to extreme decrease in the degradation capacity of cellulose, our inducer-free system enabled it and achieved high secretory production of POI with increased occupancy in glucose medium. This system would be a novel platform for heterologous recombinant protein production in T. reesei. [ABSTRACT FROM AUTHOR]

Chitosan is a non-cytotoxic polysaccharide that, upon hydrolysis, releases oligomers of different sizes that may have antioxidant, antimicrobial activity and the inhibition of cancer cell growth, among other applications. It is, therefore, a hydrolysis process with great biotechnological relevance. Thus, this study aims to use a crude enzyme concentrate (CEC) produced by a filamentous fungus to obtain oligomers with different molecular weights. The microorganism was cultivated in a liquid medium (modified Czapeck—with carboxymethylcellulose as enzyme inducer). The enzymes present in the CEC were identified by LC-MS/MS, with an emphasis on cellobiohydrolase (E.C 3.2.1.91). The fungus of the Aspergillus genus was identified by amplifying the ITS1-5.8S-ITS2 rDNA region and metaproteomic analysis, where the excreted enzymes were identified with sequence coverage greater than 84% to A. nidulans. Chitosan hydrolysis assays compared the CEC with the commercial enzyme (Celluclast 1.5 L®). The ability to reduce the initial molecular mass of chitosan by 47.80, 75.24, and 93.26% after 2.0, 5.0, and 24 h of reaction, respectively, was observed. FTIR analyses revealed lower absorbance of chitosan oligomers' spectral signals, and their crystallinity was reduced after 3 h of hydrolysis. Based on these results, we can conclude that the crude enzyme concentrate showed a significant technological potential for obtaining chitosan oligomers of different sizes. [ABSTRACT FROM AUTHOR]

Research on the gut microbiota, which involves a large and complex microbial community, is an important part of infectious disease control. In China, few studies have been reported on the diversity of the gut microbiota of wild marmots. To obtain full details of the gut microbiota, including bacteria, fungi, viruses and archaea, in wild marmots, we have sequenced metagenomes from five sample-sites feces on the Hulun Buir Grassland in Inner Mongolia, China. We have created a comprehensive database of bacterial, fungal, viral, and archaeal genomes and aligned metagenomic sequences (determined based on marmot fecal samples) against the database. We delineated the detailed and distinct gut microbiota structures of marmots. A total of 5,891 bacteria, 233 viruses, 236 fungi, and 217 archaea were found. The dominant bacterial phyla were Firmicutes, Proteobacteria, Bacteroidetes, and Actinomycetes. The viral families were Myoviridae, Siphoviridae, Phycodnaviridae, Herpesviridae and Podoviridae. The dominant fungi phyla were Ascomycota, Basidiomycota, and Blastocladiomycota. The dominant archaea were Biobacteria, Omoarchaea, Nanoarchaea, and Microbacteria. Furthermore, the gut microbiota was affected by host species and environment, and environment was the most important factor. There were 36,989 glycoside hydrolase genes in the microbiota, with 365 genes homologous to genes encoding β-glucosidase, cellulase, and cellulose β-1,4- cellobiosidase. Additionally, antibiotic resistance genes such as macB, bcrA, and msbA were abundant. To sum up, the gut microbiota of marmot had population diversity and functional diversity, which provides a basis for further research on the regulatory effects of the gut microbiota on the host. In addition, metagenomics revealed that the gut microbiota of marmots can degrade cellulose and hemicellulose. [ABSTRACT FROM AUTHOR]

Lignocellulosic biomass is a source of carbohydrates that can be used in the production of biogas. The aim of this study was to obtain biogas from biomass waste (leaves, stems and seed bagasse) of Ricinus communis, applying pretreatments such as temperature and humidity. We examined the effect of these pretreatments on the biomass, two enzymatic pretreatments (cellulase and cellobiohydrolase), two chemicals (NaOH and HCl) and two controls (dried castor straw and seed bagasse) on the methane content. The experiment was performed in two anaerobic digestion (AD) assays at a controlled temperature (37 °C) and at room temperature, with a hydraulic retention time (HRT) of 55 days. The results showed that the residues of the seed bagasse produced the highest biogas yields both at room temperature and at the controlled temperature since this material at 37 °C produced 460.63 mL gVS−1 under cellulase pretreatment; at room temperature, the highest level of production was found for the control (263.41 mL gVS−1). The lowest yields at the controlled temperature and room temperature were obtained from residues of Ricinus communis treated with cellobiohydrolase and the seed bagasse treated with alkaline (15.15 mL gVS−1 and 78.51 mL gVS−1, respectively). Meanwhile, the greatest amount of methane was produced by seed bagasse treated with cellobiohydrolase at a controlled temperature (92.2% CH4) and the lowest content of CH4 (15.5%) was obtained at a controlled temperature from castor straw under the control treatment. [ABSTRACT FROM AUTHOR]

Filamentous fungi grow through elongation of their apical region by exocytosis and secrete enzymes that can be of commercial or industrial importance. Their hyphae exhibit extensive branching, making it difficult to control hyphal growth for observation and analysis. Therefore, although hyphal morphology and productivity are closely related, the relationship between the two has not yet been clarified. Conventional morphology and productivity studies have only compared the results of macro imaging of fungal pellets cultured in bulk with the averaged products in the culture medium. Filamentous fungi are multicellular and their expression differs between different hyphae. To truly understand the relationship between morphology and productivity, it is necessary to compare the morphology and productivity of individual hyphae. To achieve this, we developed a microfluidic system that confines hyphae to individual channels for observation and investigated the relationship between their growth, morphology, and enzyme productivity. Furthermore, using Trichoderma reesei, a potent cellulaseproducing fungus, as a model, we developed a cellulase detection assay with 4-MUC substrate to detect hyphal growth and enzyme secretion in a microfluidic device in real time. Using a strain that expresses cellobiohydrolase I (CBH I) fused with AcGFP1, we compared fluorescence from the detection assay with GFP fluorescence intensity, which showed a strong correlation between the two. These results indicate that extracellular enzymes can be easily detected in the microfluidic device in real time because the production of cellulase is synchronized in T. reesei. This microfluidic system enables real-time visualization of the dynamics of hypha and enzymes during carbon source exchange and the quantitative dynamics of gene expression. This technology can be applied to many biosystems from bioenergy production to human health. [ABSTRACT FROM AUTHOR]

There is a high level of conservation of tryptophans within the active site architecture of the cellulase family, whereas the function of the four tryptophans in the catalytic domain of Cel7A is unclear. By mutating four tryptophan residues in the catalytic domain of Cel7A from Penicillium piceum (PpCel7A), the binding affinity between PpCel7A and p‐nitrophenol‐d‐cellobioside (pNPC) was reduced as determined by Michaelis–Menten constants, molecular dynamics simulations, and fluorescence spectroscopy. Furthermore, PpCel7A variants showed a reduced level of cellobiohydrolase (CBH) activity against cellulose analogs or natural cellulose. Therefore, it could be concluded four tryptophan residues in Cel7A played a critical role in substrate binding. Mutagenesis results indicated that the W390 stacking interactions at the −2 site played an essential role in facilitating substrate distortion to the −1 site. As soon as the function was altered, the mutation would inevitably affect the catalytic activity against the natural substrate. Interestingly, no clear relationship was found between the CBH activity of PpCel7A variants against pNPC and Avicel. p‐Nitrophenol contains many electrophilic groups that may result in overestimation of the binding constant between tryptophan residues and pNPC in comparison with the natural substrate. Consequently, screening improved cellulase using cellulose analogs would divert attention from the target direction for lignocellulose biorefinery. Clarifying mechanism of catalytic diversity on the natural cellulose or cellulose analogs may give better insight into cellulase screening and selecting strategy. [ABSTRACT FROM AUTHOR]

Trichoderma reesei is a powerful fungal cell factory for the production of cellulolytic enzymes due to its outstanding protein secretion capacity. Endoplasmic reticulum-associated degradation (ERAD) plays an integral role in protein secretion that responds to secretion pressure and removes misfolded proteins. However, the role of ERAD in fungal growth and endogenous protein secretion, particularly cellulase secretion, remains poorly understood in T. reesei. Here, we investigated the ability of T. reesei to grow under different stresses and to secrete cellulases by disrupting three major genes (hrd1, hrd3 and der1) involved in the critical parts of the ERAD pathway. Under the ER stress induced by high concentrations of DTT, knockout of hrd1, hrd3 and der1 resulted in severely impaired growth, and the mutants Δhrd1 and Δhrd3 exhibited high sensitivity to the cell wall-disturbing agents, CFW and CR. In addition, the absence of either hrd3 or der1 led to the decreased heat tolerance of this fungus. These mutants showed significant differences in the secretion of cellulases compared to the parental strain QM9414. During fermentation, the secretion of endoglucanase in the mutants was essentially consistent with that of the parental strain, while cellobiohydrolase and β-glucosidase were declined. It was further discovered that the transcription levels of the endoglucanase-encoding genes (eg1 and eg2) and the cellobiohydrolase-encoding gene (cbh1) were not remarkedly changed. However, the β-glucosidase-encoding gene (bgl1) was significantly downregulated in the ERAD-deficient mutants, which was presumably due to the activation of a proposed feedback mechanism, repression under secretion stress (RESS). Taken together, our results indicate that a defective ERAD pathway negatively affects fungal growth and cellulase secretion, which provides a novel insight into the cellulase secretion mechanism in T. reesei. [ABSTRACT FROM AUTHOR]

Significant engineering of Saccharomyces cerevisiae is required to enable consolidated bioprocessing (CBP) of lignocellulose to ethanol. Genome modification in S. cerevisiae has been successful partly due to its efficient homology-directed DNA repair machinery, and CRISPR technology has made multi-gene editing even more accessible. Here, we tested the integration of cellulase encoding genes to various sites on the yeast genome to inform the best strategy for creating cellulolytic strains for CBP. We targeted endoglucanase (EG) or cellobiohydrolase (CBH) encoding genes to discreet chromosomal sites for single-copy integration or to the repeated delta sites for multi-copy integration. CBH1 activity was significantly higher when the gene was targeted to the delta sequences compared to single gene integration loci. EG production was comparable, though lower when the gene was targeted to a chromosome 10 site. We subsequently used the information to construct a strain containing three cellulase encoding genes. While individual cellulase activities could be assayed and cellulose conversion demonstrated, it was shown that targeting specific genes to specific loci had dramatic effects on strain efficiency. Since marker-containing plasmids could be cured from these strains, additional genetic changes can subsequently be made to optimize strains for CBP conversion of lignocellulose. [ABSTRACT FROM AUTHOR]

Cellulose which is extremely produced by plants, can be used for biofuel production but this function needs chemical or enzymatic digestion. Cellulose hydrolysis of plant wastes for ethanol production requires a mixture of three enzyme groups, including endoglucanases, exoglucanases, and beta-glucosidases. The cellobiohydrolase enzyme (Cel6B) from Thermobifidia fusca has been used for cellulase activity extensively. This research aimed to express recombinant Cel6B enzyme in Pichia pastoris. For this purpose, cel6B gene in control of AOX1 promoter (methanol inducible) was introduced into Pichia pastoris. Amplification of cel6B gene was performed by PCR technique and then introduced into the Phil-S1 yeast vector. The recombinant construct contained the cel6B gene sequence and PHO1 signal sequence as secretion signal was transferred into Pichia pastoris GS115 strain. The transformed yeast cells expressed the recombinant Cel6B to yield 2.104 U (μmol/min)/ml of culture medium. Purified recombinant enzyme showed the best activity at 60 °C and pH 4.5 and this was agreed with optimum conditions for recombinant Cel6B enzymes which were produced in other systems. The purity of the enzyme was examined by SDS-PAGE technique, and a single band with a molecular weight about 59.6 kDa was observed. As cel6B gene sequence was not optimized for expression in the Pichia pastoris yeast, this could be one of the reasons for low level activity of recombinant Cel6B enzyme. This thermostable enzyme can be used for cellulolytic digestion of biomaterials in biofuel production research and other uses. [ABSTRACT FROM AUTHOR]

Alkaline cellobiohydrolases have the potential for application in various industries, including pulp processing and laundry where operation under high pH conditions is preferred. In this study, variants of CtCel6A cellobiohydrolase from Chaetomium thermophilum were generated by structural-based protein engineering with the rationale of increasing catalytic activity and alkaline stability. The variants included removal of the carbohydrate-binding module (CBM) and substitution of residues 173 and 200. The CBM-deleted enzyme with Y200F mutation predicted to mediate conformational change at the N-terminal loop demonstrated increased alkaline stability at 60 °C, pH 8.0 for 24 h up to 2.25-fold compared with the wild-type enzyme. Another CBM-deleted enzyme with L173E mutation predicted to induce a new hydrogen bond in the substrate-binding cleft showed enhanced hydrolysis yield of pretreated sugarcane trash up to 4.65-fold greater than that of the wild-type enzyme at the pH 8.0. The variant enzymes could thus be developed for applications on cellulose hydrolysis and plant fiber modification operated under alkaline conditions. [ABSTRACT FROM AUTHOR]

Fungal cellulases usually contain a family 1 carbohydrate-binding module (CBM1), and its role was considered to recognize the substrate specifically. This study testified that the CBM1s derived from cellobiohydrolase I of Trichoderma reesei, Penicillium oxalicum, and Penicillium funiculosum could be used as an effective accessory protein in cellulase cocktails to enhance the saccharification of lignocellulose, and its enhancement effect was significantly superior to some reported accessory proteins, such as bovine serum albumin (BSA). The promoting effects of the CBM1s were related to not only the CBM1 sources and protein dosages, but also the substrate characteristics and solid consistency during enzymatic hydrolysis. The adsorption capacity of the CBM1s, the adsorption kinetic of TrCBM from T. reesei and cellobiohydrolase, endoglucanase, and β-glucosidase from P. oxalicum, and the effect of adding TrCBM on enzyme activities of free cellulases in the hydrolysis system were investigated, and the binding conformations and affinities of CBM1s to cellulose and lignin were predicted by molecular docking. It was speculated that the higher affinity of the CBM1s to lignin than cellulases could potentially enable the CBM1s to displace cellulase adsorbed on lignin or to preferentially adsorb onto lignin to avoid ineffective adsorption of cellulase onto lignin, which enhanced cellulase system efficiency during enzymatic hydrolysis of lignocellulose. [ABSTRACT FROM AUTHOR]

Glycoengineering ultimately allows control over glycosylation patterns to generate new glycoprotein variants with desired properties. A common challenge is glycan heterogeneity, which may affect protein function and limit the use of key techniques such as mass spectrometry. Moreover, heterologous protein expression can introduce nonnative glycan chains that may not fulfill the requirement for therapeutic proteins. One strategy to address these challenges is partial trimming or complete removal of glycan chains, which can be obtained through selective application of exoglycosidases. Here, we demonstrate an enzymatic O -deglycosylation toolbox of a GH92 α-1,2-mannosidase from Neobacillus novalis , a GH2 β-galactofuranosidase from Amesia atrobrunnea and the jack bean α-mannosidase. The extent of enzymatic O -deglycosylation was mapped against a full glycosyl linkage analysis of the O -glycosylated linker of cellobiohydrolase I from Trichoderma reesei (Tr Cel7A). Furthermore, the influence of deglycosylation on Tr Cel7A functionality was evaluated by kinetic characterization of native and O -deglycosylated forms of Tr Cel7A. This study expands structural knowledge on fungal O -glycosylation and presents a ready-to-use enzymatic approach for controlled O -glycan engineering in glycoproteins expressed in filamentous fungi. [ABSTRACT FROM AUTHOR]

Enzymatic breakdown is an attractive cellulose utilisation method with a low environmental load. Its high temperature operation could promote saccharification and lower contamination risk. Here we report a hyper-thermostable cellobiohydrolase (CBH), named HmCel6A and its variant HmCel6A-3SNP that were isolated metagenomically from hot spring sediments and expressed in Escherichia coli. They are classified into glycoside hydrolases family 6 (GH6). HmCel6A-3SNP had three amino acid replacements to HmCel6A (P88S/L230F/F414S) and the optimum temperature at 95 °C, while HmCel6A did it at 75 °C. Crystal structure showed conserved features among GH6, a (β/α)8-barrel core and catalytic residues, and resembles TfCel6B, a bacterial CBH II of Thermobifida fusca, that had optimum temperature at 60 °C. From structure-function studies, we discuss unique structural features that allow the enzyme to reach its high thermostability level, such as abundance of hydrophobic and charge-charge interactions, characteristic metal bindings and disulphide bonds. Moreover, structure and surface plasmon resonance analysis with oligosaccharides suggested that the contribution of an additional tryptophan located at the tunnel entrance could aid in substrate recognition and thermostability. These results may help to design efficient enzymes and saccharification methods for cellulose working at high temperatures. Bacteria from hot springs are known for highly thermostable enzymes, which may have industrial potential. Here, a unique thermostable cellobiohydrolase is reported that can breakdown cellulose at temperature up to 95 degrees Celsius. [ABSTRACT FROM AUTHOR]

Yarrowia lipolytica is known to be capable of metabolizing glucose and accumulating lipids intracellularly; however, it lacks the cellulolytic enzymes needed to break down cellulosic biomass directly. To develop Y. lipolytica as a consolidated bioprocessing (CBP) microorganism, we previously expressed the heterologous CBH I, CBH II, and EG II cellulase enzymes both individually and collectively in this microorganism. We concluded that the coexpression of these cellulases resulted in a metabolic drain on the host cells leading to reduced cell growth and lipid accumulation. The current study aims to build a new cellulase coexpressing platform to overcome these hinderances by (1) knocking out the sucrose non-fermenting 1 (Snf1) gene that represses the energetically expensive lipid and protein biosynthesis processes, and (2) knocking in the cellulase cassette fused with the recyclable selection marker URA3 gene in the background of a lipid-accumulating Y. lipolytica strain overexpressing ATP citrate lyase (ACL) and diacylglycerol acyltransferase 1 (DGA1) genes. We have achieved a homologous recombination insertion rate of 58% for integrating the cellulases- URA3 construct at the disrupted Snf1 site in the genome of host cells. Importantly, we observed that the disruption of the Snf1 gene promoted cell growth and lipid accumulation and lowered the cellular saturated fatty acid level and the saturated to unsaturated fatty acid ratio significantly in the transformant YL163t that coexpresses cellulases. The result suggests a lower endoplasmic reticulum stress in YL163t, in comparison with its parent strain Po1g ACL-DGA1. Furthermore, transformant YL163t increased in vitro cellulolytic activity by 30%, whereas the "total in vivo newly formed FAME (fatty acid methyl esters)" increased by 16% in comparison with a random integrative cellulase-expressing Y. lipolytica mutant in the same YNB-Avicel medium. The Snf1 disruption platform demonstrated in this study provides a potent tool for the further development of Y. lipolytica as a robust host for the expression of cellulases and other commercially important proteins. [ABSTRACT FROM AUTHOR]

A codon optimized cellobiohydrolase (CBH) encoding synthetic gene of 1188 bp from a thermophilic mold Myceliophthora thermophila (MtCel6A) was cloned and heterologously expressed in Escherichia coli for the first time. In silico analysis suggested that MtCel6A is a GH6 CBH and belongs to CBHII family, which is structurally similar to Cel6A of Humicola insolens. The recombinant MtCel6A is expressed as active inclusion bodies, and the molecular mass of the purified enzyme is ~ 45 kDa. The rMtCel6A is active in a wide range of pH (4–12) and temperatures (40–100 °C) with optima at pH 10.0 and 60 °C. It exhibits T1/2 of 6.0 and 1.0 h at 60 and 90 °C, respectively. The rMtCel6A is an extremozyme with organic solvent, salt and alkali tolerance. The Km, Vmax, kcat and kcat/Km values of the enzyme are 3.2 mg mL−1, 222.2 μmol mg−1 min−1, 2492 s−1 and 778.7 s−1 mg−1 mL−1, respectively. The product analysis of rMtCel6A confirmed that it is an exoenzyme that acts from the non-reducing end of cellulose. The addition of rMtCel6A to the commercial cellulase mix (Cellic CTec2) led to 1.9-fold increase in saccharification of the pre-treated sugarcane bagasse. The rMtCel6A is a potential CBH that finds utility in industrial processes such as in bioethanol, paper pulp and textile industries. [ABSTRACT FROM AUTHOR]

is a genus of filamentous and cosmopolitan fungi that includes important species for medical mycology, food, basic research and agro-industry areas. Aspergillus section Nigri are efficient producers of hydrolytic enzymes such as cellulases that are employed in the cellulose conversion. Hence, the search of new cellulolytic isolates and their correct identification is important for carrying out safe biotechnological processes. This study aimed to characterise the cellulolytic potential of Aspergillus sp. LBM 134, isolated from the Paranaense rainforest (Argentina) and to identify the isolate through a polyphasic approach. The fungus was identified as Aspergillus niger and its cellulolytic potential was evaluated by using Congo red technique and fluorescence plate assays for carboxymethyl cellulase, β-glucosidase and cellobiohydrolase, respectively. All three cellulase activities were positive; this bio-prospective positioned A. niger LBM 134 as a promising alternative for industries that require organisms capable of carrying out cellulosic biomass processing. [ABSTRACT FROM AUTHOR]

Understanding the mechanism by which cellulases from bacteria, fungi, and protozoans catalyze the digestion of lignocellulose is important for developing cost-effective strategies for bioethanol production. Cel7A from the fungus Trichoderma reesei is a model exoglucanase that degrades cellulose strands from their reducing ends by processively cleaving individual cellobiose units. Despite being one of the most studied cellulases, the binding and hydrolysis mechanisms of Cel7A are still debated. Here, we used single-molecule tracking to analyze the dynamics of 11,116 quantum dot-labeled TrCel7A molecules binding to and moving processively along immobilized cellulose. Individual enzyme molecules were localized with a spatial precision of a few nanometers and followed for hundreds of seconds. Most enzyme molecules bound to cellulose in a static state and dissociated without detectable movement, whereas a minority of molecules moved processively for an average distance of 39 nm at an average speed of 3.2 nm/s. These data were integrated into a three-state model in which TrCel7A molecules can bind from solution into either static or processive states and can reversibly switch between states before dissociating. From these results, we conclude that the rate-limiting step for cellulose degradation by Cel7A is the transition out of the static state, either by dissociation from the cellulose surface or by initiation of a processive run. Thus, accelerating the transition of Cel7A out of its static state is a potential avenue for improving cellulase efficiency. [ABSTRACT FROM AUTHOR]

The essential transcription factor PoxCxrA is required for cellulase and xylanase gene expression in the filamentous fungus Penicillium oxalicum that is potentially applied in biotechnological industry as a result of the existence of the integrated cellulolytic and xylolytic system. However, the regulatory mechanism of cellulase and xylanase gene expression specifically associated with PoxCxrA regulation in fungi is poorly understood. In this study, the novel regulator PoxCbh (POX06865), containing a centromere protein B‐type helix‐turn‐helix domain, was identified through screening for the PoxCxrA regulon under Avicel induction and genetic analysis. The mutant ∆PoxCbh showed significant reduction in cellulase and xylanase production, ranging from 28.4% to 59.8%. Furthermore, PoxCbh was found to directly regulate the expression of important cellulase and xylanase genes, as well as the known regulatory genes PoxNsdD and POX02484, and its expression was directly controlled by PoxCxrA. The PoxCbh‐binding DNA sequence in the promoter region of the cellobiohydrolase 1 gene cbh1 was identified. These results expand our understanding of the diverse roles of centromere protein B‐like protein, the regulatory network of cellulase and xylanase gene expression, and regulatory mechanisms in fungi. [ABSTRACT FROM AUTHOR]

• Various polymer-binding domains were fused to a PET hydrolase variant Is PETaseEHA. • Is PETaseEHA_CBM fused with a cellulose-binding domain showed enhanced PET hydrolysis. • Dose-dependent effects of Is PETaseEHA_CBM on PET hydrolysis were observed. The large amounts of polyethylene terephthalate (PET) that enter and accumulate in the environment have posed a serious threat to global ecosystems and human health. A PET hydrolase from PET-assimilating bacterium Ideonella sakaiensis (Is PETase) that exhibits superior PET hydrolytic activity at mild conditions is attracting enormous attention in development of plastic biodegrading strategies. In order to enhance the PET hydrolysis capacity of Is PETase, we selected several polymer-binding domains that can adhere to a hydrophobic polymer surface and fused these to a previously engineered Is PETaseS121E/D186H/R280A (Is PETaseEHA) variant. We found that fusing a cellulose–binding domain (CBM) of cellobiohydrolase I from Trichoderma reesei onto the C-terminus of Is PETaseEHA showed a stimulatory effect on enzymatic hydrolysis of PET. Compared to the parental enzyme, Is PETaseEHA_CBM exhibited 71.5 % and 44.5 % higher hydrolytic activity at 30 ℃ and 40 ℃, respectively. The catalytic activity of Is PETaseEHA_CBM was increased by 86 % when the protein concentration was increased from 2.5 μg/mL to 20 μg/mL. These findings suggest that the fusion of polymer-binding module to Is PETase is a promising strategy to stimulate the enzymatic hydrolysis of PET. [ABSTRACT FROM AUTHOR]

Fungi are important decomposers in terrestrial ecosystems, so their responses to climate change might influence carbon (C) and nitrogen (N) dynamics. We investigated whether growth and activity of fungi under drought conditions were structured by trade-offs among traits in 15 fungal isolates from a Mediterranean Southern California grassland. We inoculated fungi onto sterilized litter that was incubated at three moisture levels (4, 27, and 50% water holding capacity, WHC). For each isolate, we characterized traits that described three potential lifestyles within the newly proposed "YAS" framework: growth yield, resource acquisition, and stress tolerance. Specifically, we measured fungal hyphal length per unit litter decomposition for growth yield; the potential activities of the extracellular enzymes cellobiohydrolase (CBH), ! β -glucosidase (BG), β -xylosidase (BX), and N-acetyl- β - D -glucosaminidase (NAG) for resource acquisition; and ability to grow in drought vs. higher moisture levels for drought stress tolerance. Although, we had hypothesized that evolutionary and physiological trade-offs would elicit negative relationships among traits, we found no supporting evidence for this hypothesis. Across isolates, growth yield, drought stress tolerance, and extracellular enzyme activities were not significantly related to each other. Thus, it is possible that drought-induced shifts in fungal community composition may not necessarily lead to changes in fungal biomass or decomposer ability in this arid grassland. [ABSTRACT FROM AUTHOR]

Inducers play an important role in fungus cellulase production. In this study, a combination of Avicel and laver powder, which contains cellulose, hemicellulose, other polysaccharides, and crude lipid, was used to induce lignocellulolytic enzyme production in Penicillium piceum H16. When Avicel was supplemented with various amounts of laver powder, cellulase activities or extracellular protein yields increased by 11.4%–102.5%, relative to those observed when Avicel alone was used. In particular, filter paper and cellobiohydrolase activities increased by as much as 39.3% and 102.5%, respectively, after supplementation with laver powder. Furthermore, laver powder supplementation enhanced the efficiency of cellulose and hemicellulose hydrolysis in crude corn stover by 39.3% and 22.2%, respectively. The results suggest that laver powder and Avicel synergistically induce lignocellulytic enzyme production and P. piceum H16 growth. iTRAQ‐based quantitative proteomics analysis results further demonstrate that laver powder supplementation optimized the synergistic lignocellulytic enzyme cocktail from P. piceum H16 by upregulating the production of cellulase‐enhancing factors and lignocellulolytic enzymes. The oligosaccharides released by laver powder may account for the synergistic induction, which may help reduce the cost of producing lignocellulytic enzymes by filamentous fungi. [ABSTRACT FROM AUTHOR]

Soil labile organic carbon (LOC) responds rapidly to environmental changes and plays an important role in carbon cycle. In this study, the seasonal fluctuations in LOC, the activities of carbon-cycle related enzymes, and the bacterial and fungal communities were analyzed for soils collected from two forests, namely Betula albosinensis (Ba) and Picea asperata Mast. (Pa), in the Qinling Mountains of China. Results revealed that the seasonal average contents of microbial biomass carbon (MBC), easily oxidized organic carbon (EOC), and dissolved organic carbon (DOC) of Pa forest soil were 13.5%, 30.0% and 15.7% less than those in Ba soil. The seasonal average enzyme activities of β-1,4-glucosidase (βG), and β-1,4-xylosidase (βX) of Ba forest soils were 30.0% and 32.3% higher than those of Pa soil while the enzyme activity of cellobiohydrolase (CBH) was 19.7% lower. Furthermore, the relative abundance of Acidobacteria was significantly higher in summer than in winter, whereas the relative abundance of Bacteroidetes was higher in winter. Regarding the fungal communities, the relative abundance of Basidiomycota was lowest in winter, whereas Ascomycota predominated in the same season. In addition, the soil LOC was significantly positively correlated with the CBH, βG and βX activities. Changes in LOC were significantly correlated with Acidobacteria, Bacteroidetes and Basidiomycota. We conclude that the seasonal fluctuations in forest soil LOC fractions relied on carbon cycle-associated enzymatic activities and microorganisms, which in turn were affected by climatic conditions. [ABSTRACT FROM AUTHOR]

Background: Penicillium funiculosum NCIM1228 is a non-model filamentous fungus that produces high-quality secretome for lignocellulosic biomass saccharification. Despite having desirable traits to be an industrial workhorse, P. funiculosum has been underestimated due to a lack of reliable genetic engineering tools. Tolerance towards common fungal antibiotics had been one of the major hindrances towards development of reliable transformation tools against the non-model fungi. In this study, we sought to understand the mechanism of drug tolerance of P. funiculosum and the provision to counter it. We then attempted to identify a robust method of transformation for genome engineering of this fungus. Results: Penicillium funiculosum showed a high degree of drug tolerance towards hygromycin, zeocin and nourseothricin, thereby hindering their use as selectable markers to obtain recombinant transformants. Transcriptome analysis suggested a high level expression of efflux pumps belonging to ABC and MFS family, especially when complex carbon was used in growth media. Antibiotic selection medium was optimized using a combination of efflux pump inhibitors and suitable carbon source to prevent drug tolerability. Protoplast-mediated and Agrobacterium-mediated transformation were attempted for identifying efficiencies of linear and circular DNA in performing genetic manipulation. After finding Ti-plasmid-based Agrobacterium-mediated transformation more suitable for P. funiculosum, we improvised the system to achieve random and homologous recombination-based gene integration and deletion, respectively. We found single-copy random integration of the T-DNA cassette and could achieve 60% efficiency in homologous recombination-based gene deletions. A faster, plasmid-free, and protoplast-based CRISPR/Cas9 gene-editing system was also developed for P. funiculosum. To show its utility in P. funiculosum, we deleted the gene coding for the most abundant cellulase Cellobiohydrolase I (CBH1) using a pair of sgRNA directed towards both ends of cbh1 open reading frame. Functional analysis of ∆cbh1 strain revealed its essentiality for the cellulolytic trait of P. funiculosum secretome. Conclusions: In this study, we addressed drug tolerability of P. funiculosum and developed an optimized toolkit for its genome modification. Hence, we set the foundation for gene function analysis and further genetic improvements of P. funiculosum using both traditional and advanced methods. [ABSTRACT FROM AUTHOR]

Functional screening of metagenomic libraries is an effective approach for identification of novel enzymes. A Caatinga biome goat rumen metagenomic library was screened using esculin as a substrate, and a gene from an unknown bacterium encoding a novel GH3 enzyme, BGL11, was identified. None of the BGL11 closely related genes have been previously characterized. Recombinant BGL11 was obtained and kinetically characterized. Substrate specificity of the purified protein was assessed using seven synthetic aryl substrates. Activity towards nitrophenyl-β-D-glucopyranoside (pNPG), 4-nitrophenyl-β-D-xylopyranoside (pNPX) and 4-nitrophenyl-β-D-cellobioside (pNPC) suggested that BGL11 is a multifunctional enzyme with β-glucosidase, β-xylosidase, and cellobiohydrolase activities. However, further testing with five natural substrates revealed that, although BGL11 has multiple substrate specificity, it is most active towards xylobiose. Thus, in its native goat rumen environment, BGL11 most likely functions as an extracellular β-xylosidase acting on hemicellulose. Biochemical characterization of BGL11 showed an optimal pH of 5.6, and an optimal temperature of 50°C. Enzyme stability, an important parameter for industrial application, was also investigated. At 40°C purified BGL11 remained active for more than 15 hours without reduction in activity, and at 50°C, after 7 hours of incubation, BGL11 remained 60% active. The enzyme kinetic parameters of Km and Vmax using xylobiose were determined to be 3.88 mM and 38.53 μmol.min-1.mg-1, respectively, and the Kcat was 57.79 s-1. In contrast to BLG11, most β-xylosidases kinetically studied belong to the GH43 family and have been characterized only using synthetic substrates. In industry, β-xylosidases can be used for plant biomass deconstruction, and the released sugars can be fermented into valuable bio-products, ranging from the biofuel ethanol to the sugar substitute xylitol. [ABSTRACT FROM AUTHOR]

Sequential pretreatments for sugarcane bagasse (scb) by NaOH followed by organosolv under mild conditions were evaluated for cellulose recovery and dilignification. The best-optimized sequential pretreatment of scb was obtained at 10% (w/v) of raw scb loading at 1% (w/v) NaOH (50 °C, 2 h) followed by treatment with organosolv (85%, v/v phosphoric acid, 50 °C, 1 h) with chilled acetone. This sequentially pretreated scb showed cellulose recovery, 66.1% (w/w) and delignification, 83.2% (w/w). NaOH or organosolv pretreated scb showed lower cellulose recovery 47.4% (w/w) or 54.5% (w/w) with lower delignification, 61% (w/w) or 56% (w/w), respectively. Pretreated solid residue of sequentially pretreated scb was enzymatically saccharified by chimera (β-glucosidase and endoglucanase, CtGH1-L1-CtGH5-F194A) and cellobiohydrolase (CtCBH5A) cloned from Clostridium thermocellum. Enzymatic hydrolysate of best sequentially pretreated scb gave total reducing sugar (TRS) yield, 230 mg/g and glucose yield, 137 mg/g pretreated scb. Only organosolv pretreated scb gave TRS yield, 112.5 mg/g and glucose yield, 72 mg/g of pretreated scb. Thus, sequentially pretreated scb resulted in 37% higher enzymatic digestibility than only orgnaosolv pretreated scb. Higher enzymatic digestibility was supported by higher crystallinity index CrI (45%) than those obtained with only organosolv pretreated (38%) or raw scb (25%). Field Emission Scanning Electron Microscope (FESEM) and Fourier-transform infrared (FT-IR) analyses showed enhanced cellulose exposure in sequentially pretreated scb. Preliminary investigation of bioethanol production at small scale by separate hydrolysis and fermentation (SHF) of enzymatic hydrolysate from best sequentially pretreated scb by Saccharomyces cerevisiae gave maximum ethanol yield of 0.42 g/g of glucose. [ABSTRACT FROM AUTHOR]

Consolidated bioprocessing using oleaginous yeast is a promising modality for the economic conversion of plant biomass to fuels and chemicals. However, yeast are not known to produce effective biomass degrading enzymes naturally and this trait is essential for efficient consolidated bioprocessing. We expressed a chimeric cellobiohydrolase I gene in three different oleaginous, industrially relevant yeast: Yarrowia lipolytica, Lipomyces starkeyi, and Saccharomyces cerevisiae to study the biochemical and catalytic properties and biomass deconstruction potential of these recombinant enzymes. Our results showed differences in glycosylation, surface charge, thermal and proteolytic stability, and efficacy of biomass digestion. L. starkeyi was shown to be an inferior active cellulase producer compared to both the Y. lipolytica and S. cerevisiae enzymes, whereas the cellulase expressed in S. cerevisiae displayed the lowest activity against dilute-acid-pretreated corn stover. Comparatively, the chimeric cellobiohydrolase I enzyme expressed in Y. lipolytica was found to have a lower extent of glycosylation, better protease stability, and higher activity against dilute-acid-pretreated corn stover. [ABSTRACT FROM AUTHOR]

Cellobiohydrolase I from Trichoderma reesei (TrCel7A) is one of the best-studied cellulases, exhibiting high activity towards crystalline cellulose. Tryptophan residues at subsites -7 and -4 (Trp40 and Trp38 respectively) are located at the entrance and middle of the tunnel-like active site of TrCel7A, and are conserved among the GH family 7 cellobiohydrolases. Trp40 of TrCel7A is important for the recruitment of cellulose chain ends on the substrate surface, but the role of Trp38 is less clear. Comparison of the effects of W38A and W40A mutations on the binding energies of sugar units at the two subsites indicated that the contribution of Trp38 to the binding was greater than that of Trp40. In addition, the smooth gradient of binding energy was broken in W38A mutant. To clarify the importance of Trp38, the activities of TrCel7A WT and W38A towards crystalline cellulose and amorphous cellulose were compared. W38A was more active than WT towards amorphous cellulose, whereas its activity towards crystalline cellulose was only one-tenth of that of WT. To quantify the effect of mutation at subsite -4, we measured kinetic parameters of TrCel7A WT, W40A and W38A towards cello-oligosaccharides. All combinations of enzymes and substrates showed substrate inhibition, and comparison of the inhibition constants showed that the Trp38 residue increases the velocity of substrate intake (kon for forming productive complex) from the minus side of the subsites. These results indicate a key role of Trp38 residue in processively loading the reducing-end of cellulose chain into the catalytic tunnel. [ABSTRACT FROM AUTHOR]

Lytic polysaccharide monooxygenases (LPMOs) are crucial industrial enzymes required in the biorefinery industry as well as in the natural carbon cycle. These enzymes, known to catalyze the oxidative cleavage of glycosidic bonds, are produced by numerous bacterial and fungal species to assist in the degradation of cellulosic biomass. In this study, we annotated and performed structural analysis of an uncharacterized LPMO from Penicillium funiculosum (PfLPMO9) based on computational methods in an attempt to understand the behavior of this enzyme in biomass degradation. PfLPMO9 exhibited 75% and 36% sequence identities with LPMOs from Thermoascus aurantiacus (TaLPMO9A) and Lentinus similis (LsLPMO9A), respectively. Furthermore, multiple fungal genetic manipulation tools were employed to simultaneously overexpress LPMO and cellobiohydrolase I (CBH1) in a catabolitederepressed strain of Penicillium funiculosum, PfMig188 (an engineered variant of P. funiculosum), to improve its saccharification performance toward acid-pretreated wheat straw (PWS) at 20% substrate loading. The resulting transformants showed improved LPMO and CBH1 expression at both the transcriptional and translational levels, with -200% and -66% increases in ascorbate-induced LPMO and Avicelase activities, respectively. While the secretome of PfMig88 overexpressing LPMO or CBH1 increased the saccharification of PWS by 6% or 13%, respectively, over the secretome of PfMig188 at the same protein concentration, the simultaneous overexpression of these two genes led to a 20% increase in saccharification efficiency over that observed with PfMig188, which accounted for 82% saccharification of PWS under 20% substrate loading. [ABSTRACT FROM AUTHOR]

Cellobiohydrolases directly convert crystalline cellulose into cellobiose and are of biotechnological interest to achieve efficient biomass utilization. As a result, much research in the field has focused on identifying cellobiohydrolases that are very fast. Cellobiohydrolase A from the bacterium Cellulomonas fimi (CfCel6B) and cellobiohydrolase II from the fungus Trichoderma reesei (TrCel6A) have similar catalytic domains (CDs) and show similar hydrolytic activity. However, TrCel6A and CfCel6B have different cellulose-binding domains (CBDs) and linkers: TrCel6A has a glycosylated peptide linker, whereas CfCel6B's linker consists of three fibronectin type 3 domains. We previously found that TrCel6A's linker plays an important role in increasing the binding rate constant to crystalline cellulose. However, it was not clear whether CfCel6B's linker has similar function. Here we analyze kinetic parameters of CfCel6B using single-molecule fluorescence imaging to compare CfCel6B and TrCel6A. We find that CBD is important for initial binding of CfCel6B, but the contribution of the linker to the binding rate constant or to the dissociation rate constant is minor. The crystal structure of the CfCel6B CD showed longer loops at the entrance and exit of the substrate-binding tunnel compared with TrCel6A CD, which results in higher processivity. Furthermore, CfCel6B CD showed not only fast surface diffusion but also slow processive movement, which is not observed in TrCel6A CD. Combined with the results of a phylogenetic tree analysis, we propose that bacterial cellobiohydrolases are designed to degrade crystalline cellulose using high-affinity CBD and high-processivity CD. [ABSTRACT FROM AUTHOR]

Lytic polysaccharide monooxygenases (LPMOs) have emerged as key proteins for depolymerization of cellulose. These copper-containing enzymes oxidize C-1 and/or C-4 bonds in cellulose, promoting increased hydrolysis of the oxidized cellulose chains. The LPMO from Thermoascus aurantiacus, a thermophilic ascomycete fungus, has been extensively studied and has served as a model LPMO. A method was developed to purify the LPMO from culture filtrates of T. aurantiacus along with its native cellobiohydrolase and endoglucanase. The activity of the purified LPMO was measured with a colorimetric assay that established the Topt of the native LPMO at 60 °C. Purification of the components of the T. aurantiacus cellulase mixture also enabled quantification of the amounts of cellobiohydrolase, endoglucanase and LPMO present in the T. aurantiacus culture filtrate, establishing that the LPMO was the most abundant protein in the culture supernatants. The importance of the LPMO to activity of the mixture was demonstrated by saccharifications with Avicel and acid-pretreated corn stover. [ABSTRACT FROM AUTHOR]

Saprobic soil fungi drive many important ecosystem processes, including decomposition, and many of their effects are related to growth rate and enzymatic ability. In mycology, there has long been the implicit assumption of a trade-off between growth and enzymatic investment, which we test here using a set of filamentous fungi from the same soil. For these fungi we measured growth rate (as colony radial extension) and enzymatic repertoire (activities of four enzymes: laccase, cellobiohydrolase, leucine aminopeptidase and acid phosphatase), and explored the interaction between the traits based on phylogenetically corrected methods. Our results support the existence of a trade-off, however only for the enzymes presumably representing a larger metabolic cost (laccase and cellobiohydrolase). Our study offers new insights into potential functional complementarity within the soil fungal community in ecosystem processes, and experimentally supports an enzymatic investment/growth rate trade-off underpinning phenomena including substrate succession. [ABSTRACT FROM AUTHOR]

A novel cellobiohydrolase (CBH)-generating fungi have been isolated and categorized as Schizophyllum commune KMJ820 based on morphology and rDNA gene sequence. Cellulose powder was used as carbon source, the total enzyme activity was 11.51 U/ml is noted; which is among the highest amounts of CBH-generating microbes studied. CBH have been purified to homogenize, with pursual of serial chromatography using S. commune supernatants and two different CBHs were found; CBH 1 and 2. The filtered CBHs showed greater activity (Vmax = 51.4 and 20.8 U/mg) in contrast to CBHs from earlier studies. The MW (molecular weights) of S. commune CBH 1 and 2 were verified to be approximately 50 kDa and 150 kDa, respectively, by size exclusion chromatography. Even though CBHs have been evaluated from other sources, but S. commune CBH is prominent in comparison to other CBHs by its high enzyme activity. [ABSTRACT FROM AUTHOR]