Search

In recent years, due to modern techniques for the distribution, transport, and retail sale of food, the production of large amounts of non-biodegradable and bioaccumulative packaging waste has become a major environmental issue. To address this issue, new food packaging materials based on renewable biomass have been studied as eco-friendly, biodegradable, and biocompatible alternatives to synthetic materials. However, although these materials are not petrochemical derivatives, the presence of contaminants cannot be excluded. This work aims to extend the knowledge on bio-based packaging materials, researching the presence of contaminants potentially able to migrate to food at concentrations of concern. In this study, we focus on two classes of contaminants, organophosphate esters (OPEs) and perfluoroalkyl substances (PFASs), carrying out migration tests toward different simulants, according to the current European regulation. PFAS analysis was performed using high-resolution liquid chromatography coupled to ion trap-tandem mass spectrometry (QTrap). OPE analyses were performed both by gas chromatography-mass spectrometry (GC-MS) and high-resolution liquid chromatography coupled to triple quadrupole mass spectrometry (TQMS). Preliminary findings demonstrate the release of toxic OPEs and PFASs from bio-based food packaging, highlighting the need to investigate the presence of potentially harmful chemicals in these materials.

Occupational exposure to airborne particles can increase the development of morbidity, also because of the chemical composition of particulate matter (PM). In workplace, where manual and mechanical disassembly of electric and electronic equipment (EEE) take place, there are evident risks of respiratory exposure to a great number of different toxic organic compounds present in the electrical and plastic materials of which the equipment is made. Airborne particles are numerous, cover a wide range of sizes and are rich in toxic organic compounds. In the present work, a sampling program was conducted and ultrafine, fine and coarse airborne particles were collected in three EEE waste treatment plants. Afterwards, the extraction and analysis of polycyclic aromatic hydrocarbons (PAHs), their nitro and oxygenated derivatives (nitroPAHs, oxyPAHs), organophosphorus compounds (OPEs), Brominated Flame Retardants (BFRs), polychlorinated biphenyls (PCBs), Polybrominated Diphenyl Ethers (PBDEs), and polyfluoralkyl substances (PFASs) was performed. The percentage ratio of the mass of organic compounds and the mass of the ultrafine fraction of PM (PM 0.1 ) was higher than those of the fine and coarse fractions. Even with low concentrations, the co-occurrence of numerous potentially toxic compounds capable of easily reaching other organs passing by the lung vasculature, through the lymph makes the working environment unhealthy., Competing Interests: Declaration of competing interest All the authors declare no actual or potential conflicts of interest regarding the submitted manuscript., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

In the last years, many studies have focused on risk assessment of exposure of workers to airborne particulate matter (PM). Several studies indicate a strong correlation between PM and adverse health outcomes, as a function of particle size. In the last years, the study of atmospheric particulate matter has focused more on particles less than 10 μm or 2.5 μm in diameter; however, recent studies identify in particles less than 0.1 μm the main responsibility for negative cardiovascular effects. The present paper deals with the determination of 66 organic compounds belonging to six different classes of persistent organic pollutants (POPs) in the ultrafine, fine and coarse fractions of PM (PM < 0.1 µm; 0.1 < PM < 2.5 µm and 2.5 < PM < 10 µm) collected in three outdoor workplaces and in an urban outdoor area. Data obtained were analyzed with principal component analysis (PCA), in order to underline possible correlation between sites and classes of pollutants and characteristic emission sources. Emission source studies are, in fact, a valuable tool for both identifying the type of emission source and estimating the strength of each contamination source, as useful indicator of environment healthiness. Moreover, both carcinogenic and non-carcinogenic risks were determined in order to estimate human health risk associated to study sites. Risk analysis was carried out evaluating the contribution of pollutant distribution in PM size fractions for all the sites. The results highlighted significant differences between the sites and specific sources of pollutants related to work activities were identified. In all the sites and for all the size fractions of PM both carcinogenic and non-carcinogenic risk values were below acceptable and safe levels of risks recommended by the regulatory agencies.

The occurrence of halogenated organic pollutants in indoor dust can be high due to the presence of textile, electronic devices, furniture, and building materials treated with these chemicals. In this explorative study, we focused on emerging organic pollutants, such as novel brominated flame retardants (nBFRs) and some perfluoroalkyl substances, together with legacy polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (BDEs) in settled dust collected in houses and workplaces such as one office and two electrotechnical and mechanical workshops. The total contribution of the investigated pollutants was lower in house and in office dusts except for few nBFRs (such as bis (2-ethylhexyl)-3,4,5,6-tetrabromo-phthalate at a concentration of 464.5 ng/g in a house and hexachlorocyclopentadienyldibromocyclooctane at 40.4 ng/g in the office), whereas in electrotechnical and mechanical workshops a high incidence of PCBs, BDEs, and nBFRs occurred (for example, BDE 209 at a concentration of 2368.0 ng/g and tetrabromobisphenol A at 32,320.1 ng/g in electrotechnical and mechanical workshops). Estimated daily intakes were also calculated, showing that domestic and occupational environments can lead to a similar contribution in terms of human exposure. The higher exposure contribution was associated to nBFRs, whose EDIs were in the range of 3968.2-555,694.2 pg/kg bw/day. To provide a complete view about the indoor contamination, in this investigation, we also included polycyclic aromatic hydrocarbons (PAHs) and their oxygenated and nitrated derivatives. Definitely, dust collection represents a simple, fast, and cost-effective sampling and dust contamination level can be a useful indicator of environment healthiness. Besides, the presented method can be a smart tool to provide a time and money saving technique to characterize 99 pollutants thanks to a single sample treatment., Competing Interests: The authors declare no conflict of interest.

The microbial synthesis of polyhydroxyalkanoates (PHA) from organic wastes is a valuable process to valorize available renewable resources, such as food wastes and biological sludge. Bioplastics find many applications in various sectors, from medical field to food industry. However, persistent organic pollutants could be transferred from wastes to the final product. The present paper demonstrates that the use of municipal wastes in PHA production is safe for the environment and human health and provides a polychlorinated biphenyl (PCB) profile in both commercial and waste-based PHA samples. PCB analysis in several PHA samples showed very low concentrations of the target analytes. Commercial PHA samples showed a similar PCB level with respect to PHA samples from municipal waste/sludge and higher than PHA samples from fruit waste. For all analyzed PCBs, detected concentrations were consistently lower than the ones reported in regulatory framework or guidelines.

Wastewater carries different pathogenic and non-pathogenic microorganisms that can be dispersed in the surrounding environment. Workers who frequent sewage treatment plants can therefore be exposed to aerosols that contain a high concentration of potentially dangerous biological agents, or they can come into direct contact with contaminated material. This can lead to allergies, infections and occupational health-associated diseases. A characterization of biological risk assessment of bioaerosol exposure is necessary. The aim of this study was to evaluate the application of an interdisciplinary method that combines chemical and biological approaches for the analysis of a bioaerosol derived from a wastewater treatment plant (WWTP) situated in Italy. Sampled filters were analyzed by HPLC-MS/MS spectroscopy that searched for different chemical biomarkers of airborne microorganisms. The analytical quantification was compared to the biological cultural method that revealed an underrated microbial concentration. Furthermore, next generation sequencing analysis was used also to identify the uncultivable species that were not detected by the culture dependent-method. Moreover, the simple animal model Caenorhabditis elegans was used to evaluate the pathogenicity of two isolates- Acinetobacter iwoffii and Micrococcus luteus- that showed multidrug-resistance. This work represents a starting point for the development of a multidisciplinary approach for the validation of bioaerosol exposure on WWTP workplaces.

Speciation studies are based on fundamental models that relate the properties of biomimetic coordination compounds to the stability of the complexes. In addition to the classic approach based on solution studies, solid state properties have been recently proposed as supporting tools to understand the bioavailability of the involved metal. A ten-year long systematic study of several different complexes of imidazole substituted ligands with transition metal ions led our group to the definition of a model based on experimental evidences. This model revealed to be a useful tool to predict the stability of such coordination complexes and is based on the induced behavior under thermal stress. Several different solid state complexes were characterized by Thermally Induced Evolved Gas Analysis by Mass Spectrometry (TI-EGA-MS). This hyphenated technique provides fundamental information to determine the solid state properties and to create a model that relates stability to coordination. In this research, the model resulting from our ten-year long systematic study of complexes of transition metal ions with imidazole substituted ligands is described. In view of a systematic addition of information, new complexes of Cu(II), Zn(II), or Cd(II) with 2-propyl-4,5-imidazoledicarboxylic acid were precipitated, characterized, and studied by means of Thermally Induced Evolved Gas Analysis performed by mass spectrometry (TI-EGA-MS). The hyphenated approach was applied to enrich the information related to thermally induced steps, to confirm the supposed decomposition mechanism, and to determine the thermal stability of the studied complexes. Results, again, allowed supporting the theory that only two main characteristic and common thermally induced decomposition behaviors join the imidazole substituted complexes studied by our group. These two behaviors could be considered as typical trends and the model allowed to predict coordination behavior and to provide speciation information.

Mycotoxins exposure by inhalation and/or dermal contact is possible in different branches of industry especially where heavily dusty settings are present and the handling of dusty commodities is performed. This study aims to explore the validity of the biomonitoring as a tool to investigate the intake of mycotoxins in a population of workers operating in an Italian feed plant. Serum samples were collected for the determination of aflatoxins B1 (AFB1), AFB1-Lysine adduct and ochratoxin A (OTA). A method based on liquid-liquid extraction coupled with high resolution mass spectrometry determination was developed and fully validated. For AFB1, a high number of non-detected samples (90%) was found and no statistical difference was observed comparing workers and control group. None of the analyzed samples showed the presence of AFB1-Lysine adduct. For OTA, the 100% of the analyzed samples was positive with a 33% of the samples showing a concentration higher than the limit of quantification (LOQ), but no statistical difference was highlighted between the average levels of exposed and control groups. In conclusion, the presence of AFB1 and OTA in serum cannot be attributable to occupational exposure.

Fosetyl-aluminum is a synthetic fungicide administered to plants especially to prevent diseases caused by the members of the Peronosporales and several Phytophthora species. Herein, we present a selective liquid chromatography-tandem mass spectrometry (LC-MS/MS) method to analyze residues of fosetyl-A1 in air particulate matter. This study was performed in perspective of an exposure assessment of this substance of health concern in environments where high levels of fosetly-Al, relatively to airborne particulate matter, can be found after spraying it. The cleanup procedure of the analyte, from sampled filters of atmospheric particulate matter, was optimized using a Strata X solid-phase extraction cartridge, after accelerated extraction by using water. The chromatographic separation was achieved using a polymeric column based on hydrophilic interaction in step elution with water/acetonitrile, whereas the mass spectrometric detection was performed in negative electrospray ionization. The proposed method resulted to be a simple, fast, and suitable method for confirmation purposes.

Airborne bacteria are components of the atmospheric aerosol particles and can be responsible of allergic disease, regardless of their viability. In this paper, we report a method for the determination of total (viable and nonviable) bacterial content in airborne particles, using muramic and dipicolinic acids as biomarkers of bacteria and bacterial spores, respectively. The analytical procedure was optimized with bacteria and spores of Bacillus subtilis. After extraction and purification, the two biomarkers were analyzed by HPLC-ESI-MS/MS and their percentage was evaluated to be used as conversion factor. The present method for the determination of the total bacterial content was then applied to environmental samples, after a proper collection in an urban site. Thanks to the use of a low pressure impactor, capable of fractionating particles into the range of 0.03-10 μm, it was also possible to study the bacterial content in ultrafine, fine, and coarse particulate matter. The results from this study showed that muramic and dipicolinic acids can be determined together in one chromatographic run in reversed phase ion pair chromatography. Bacteria were more abundant than bacterial spores in the urban atmosphere, both showing a higher concentration in the coarse fraction of particles, although bacteria and bacterial spore amounts per unit mass of ultrafine particles were higher than in fine and coarse particles.

In Kluyveromyces lactis yeast, OCH1 encodes for the α-1,6-mannosyltrasferase that adds the initial α-1,6-mannose to the outer-chains of N-glycoproteins. Kloch1-1 mutant cells showed altered calcium homeostasis and endoplasmic reticulum (ER) stress. Since ER plays a major role in lipid biosynthesis and lipid droplet (LD) formation, herein the impact of Och1p depletion on lipid homeostasis was investigated. Transcriptional profiles of genes involved in biosynthesis of fatty acids, their amount and composition changed in mutant cells. An increased amount of ergosterol was determined in these cells. Enhanced transcription of genes involved in both synthesis and mobilization of LDs was also found in Kloch1-1 cells, accompanied by a reduced amount of LDs. We provide evidence that ER alterations, determined by protein misfolding as a result of reduced N-glycosylation, induced altered lipid homeostasis in Kloch1-1 cells. Chemical chaperone 4-phenyl butyrate (4-PBA) slightly alleviated the LD phenotype in cells depleted of Och1p. Remarkably, complete suppression of ER stress, via increased expression of plasma membrane calcium channel subunit Mid1, fully restored lipid homeostasis in mutant cells. To further reinforce this finding, low numbers of LDs were observed in wild type cells when ER stress was triggered by DTT treatment., (Copyright © 2015 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.)