Search

Rheumatoid arthritis is characterised by a progressive, intermittent inflammation at the synovial membrane, which ultimately leads to the destruction of the synovial joint. The synovial membrane as the joint capsule's inner layer is lined with fibroblast-like synoviocytes that are the key player supporting persistent arthritis leading to bone erosion and cartilage destruction. While microfluidic models that model molecular aspects of bone erosion between bone-derived cells and synoviocytes have been established, RA's synovial-chondral axis has not yet been realised using a microfluidic 3D model based on human patient in vitro cultures. Consequently, we established a chip-based three-dimensional tissue coculture model that simulates the reciprocal cross talk between individual synovial and chondral organoids. When co-cultivated with synovial organoids, we could demonstrate that chondral organoids induce a higher degree of cartilage physiology and architecture and show differential cytokine response compared to their respective monocultures highlighting the importance of reciprocal tissue-level cross talk in the modelling of arthritic diseases.

In the advent of affordable photo- and soft-lithography using polydimethylsiloxane (PDMS), low cost multi-step microfabrication methods have become available to a broad scientific community today. Although these methods are frequently applied for microfluidic prototype production in academic and industrial settings, fast design iterations and rapid prototyping within a few minutes with a high degree of flexibility are nearly impossible. To reduce microfluidic concept-to-chip time and costs, a number of alternative rapid prototyping techniques have recently been introduced including CNC micromachining, 3D printing and plotting out of numeric CAD designs as well as micro-structuring of thin PDMS sheets and pressure sensitive adhesives. Although micro-structuring of pressure sensitive adhesives promises high design flexibility, rapid fabrication and simple biochip assembly, most adhesives are toxic for living biological systems. Since an appropriate bio-interface and proper biology-material interaction is key for any cell chip and organ-on-a-chip system, only a limited number of medical-grade materials are available for microfluidic prototyping. In this study, we have characterized four functional biomedical-grade pressure sensitive adhesives for rapid prototyping (e.g. less than 1 hour) applications including structuring precision, physical and optical properties as well as biocompatibilities. While similar biocompatibility was found for all four adhesives, significant differences in cutting behavior, bonding strength to glass and polymers as well as gas permeability was observed. Practical applications included stability testing of multilayered, membrane-integrated organ-on-a-chip devices under standard cell culture conditions (e.g. 2–3 weeks at 37 °C and 100% humidity) and a shear-impact up to 5 dynes/cm2. Additionally, time- and shear-dependent uptake of non-toxic fluorescently labelled nanoparticles on human endothelial cells are demonstrated using micro-structured adhesive-bonded devices. Our results show that (a) both simple and complex microdevices can be designed, fabricated and tested in less than 1 hour, (b) these microdevices are stable for weeks even under physiological shear force conditions and (c) can be used to maintain cell monolayers as well as 3D cell culture systems.

Organ-on-a-chip technology has the potential to accelerate pharmaceutical drug development, improve the clinical translation of basic research, and provide personalized intervention strategies. In the last decade, big pharma has engaged in many academic research cooperations to develop organ-on-a-chip systems for future drug discoveries. Although most organ-on-a-chip systems present proof-of-concept studies, miniaturized organ systems still need to demonstrate translational relevance and predictive power in clinical and pharmaceutical settings. This review explores whether microfluidic technology succeeded in paving the way for developing physiologically relevant human in vitro models for pharmacology and toxicology in biomedical research within the last decade. Individual organ-on-a-chip systems are discussed, focusing on relevant applications and highlighting their ability to tackle current challenges in pharmacological research.

After decades of simply being referred to as the body’s sewage system, the lymphatic system has recently been recognized as a key player in numerous physiological and pathological processes. As an essential site of immune cell interactions, the lymphatic system is a potential target for next-generation drug delivery approaches in treatments for cancer, infections, and inflammatory diseases. However, the lack of cell-based assays capable of recapitulating the required biological complexity combined with unreliable in vivo animal models currently hamper scientific progress in lymph-targeted drug delivery. To gain more in-depth insight into the blood-lymph interface, we established an advanced chip-based microvascular model to study mechanical stimulation’s importance on lymphatic sprout formation. Our microvascular model’s key feature is the co-cultivation of spatially separated 3D blood and lymphatic vessels under controlled, unidirectional interstitial fluid flow while allowing signaling molecule exchange similar to the in vivo situation. We demonstrate that our microphysiological model recreates biomimetic interstitial fluid flow, mimicking the route of fluid in vivo, where shear stress within blood vessels pushes fluid into the interstitial space, which is subsequently transported to the nearby lymphatic capillaries. Results of our cell culture optimization study clearly show an increased vessel sprouting number, length, and morphological characteristics under dynamic cultivation conditions and physiological relevant mechanobiological stimulation. For the first time, a microvascular on-chip system incorporating microcapillaries of both blood and lymphatic origin in vitro recapitulates the interstitial blood-lymph interface.

We have developed a highly integrated lab-on-a-chip containing embedded electrical microsensors, μdegassers and pneumatically-actuated micropumps to monitor allergic hypersensitivity. Rapid antigen-mediated histamine release (e.g. s to min) and resulting muscle contraction (

Bonding of a variety of inorganic and organic polymers as multi-layered structures is one of the main challenges for biochip production even to date, since the chemical nature of these materials often does not allow easy and straight forward bonding and proper sealing. After selection of an appropriate method to bond the chosen materials to form a complex biochip, function and stability of bonding either requires qualitative burst tests or expensive mechanical multi-test stations, that often do not have the right adaptors to clamp biochip slides without destruction. Therefore, we have developed a simple and inexpensive bonding test based on 3D printed transmission elements that translate compressive forces via manual compression, hand press or hydraulic press compression into shear and tensile force. Mechanical stress simulations showed that design of the bonding geometry and size must be considered for bonding tests since the stress distribution thus bonding strength heavily varies with size but also with geometry. We demonstrate the broad applicability of our 3D printed bonding test system by testing the most frequent bonding strategies in combination with the respective most frequently used biochip material in a force-to-failure study. All evaluated materials are biocompatible and used in cell-based biochip devices. This study is evaluating state-of-the-art bonding approaches used for sealing of microfluidic biochips including adhesive bonding, plasma bonding, solvent bonding as well as bonding mediated by amino-silane monolayers or even functional thiol-ene epoxy biochip materials that obviate intermediate adhesive layers.

Glucose transport is key for cellular metabolism as well as physiological function and is maintained via passive facilitated and active sodium-glucose linked transport routes. Here, we present for the first time Fourier-transform infrared spectroscopy as a novel approach for quantification of apical-to-basolateral glucose transport of in vitro cell barrier models using liver, lung, intestinal and placental cancer cell lines. Results of our comparative study revealed that distinct differences could be observed upon subjection to transport inhibitors.

In this work, we describe a microfluidic three-dimensional (3D) chondrocyte culture mimicking in vivo articular chondrocyte morphology, cell distribution, metabolism, and gene expression. This has been accomplished by establishing a physiologic nutrient diffusion gradient across the simulated matrix, while geometric design constraints of the microchambers drive native-like cellular behavior. Primary equine chondrocytes remained viable for the extended culture time of 3 weeks and maintained the low metabolic activity and high Sox9, aggrecan, and Col2 expression typical of articular chondrocytes. Our microfluidic 3D chondrocyte microtissues were further exposed to inflammatory cytokines to establish an animal-free, in vitro osteoarthritis model. Results of our study indicate that our microtissue model emulates the basic characteristics of native cartilage and responds to biochemical injury, thus providing a new foundation for exploration of osteoarthritis pathophysiology in both human and veterinary patients. Keywords: Organ-on-a-Chip, Cartilage, Primary cells, Tissue-on-a-Chip

Infectious molecular clones of the human immunodeficiency virus type 2 (HIV-2) will be valuable tools for the study of regulatory gene functions and the development of an animal model for the human acquired immunodeficiency syndrome (AIDS). To this end, we have cloned and sequenced a novel HIV-2 isolate, HIV-2BEN. One clone, designated MK6, is infectious for various human T-cell lines and for human and macaque peripheral blood lymphocytes (PBL), allowing molecular studies of HIV-2 infection and replication. Since MK6 is highly cytopathic in MT-2 and Molt-4 clone 8 cells, antiviral agents and neutralizing sera may be tested. Cluster analysis of HIV-1, HIV-2, and simian immunodeficiency virus (SIV) env and gag genes revealed that HIV-2BEN yielded the earliest node of phylogenetic divergence for all reported HIV-2 sequences. Noise analysis showed that, with the current data, no specification of any branching order can be made among the four groups of primate lentiviruses, HIV-1, HIV-2/SIVSMM/MAC, SIVAGM, and SIVMND.

The problem of sequencing short double stranded DNA like products of the polymerase chain reaction (PCR) is the tendency of the templates to reanneal. The use of dimethyl sulphoxide (DMSO) can hep to overcome this problem1. Using the T7 sequencing96 kit (Pharmacia), we have found that addition of 0.5% of nonidet P40 (NP-40) or the combination of 0.5% NP-40 with 0.5% Tween 20 to the sequencing reaction mix2 enhances the intensity of signals obtained and also reduces the frequency of unspecific bands appearing in certain positions. Double stranded DNA spanning 1 l5bp of the gag region of HIV-2ben3 (1875-1989) was amplified by the polymerase chain reaction4 (PCR). Amplified DNA was purified by electrophoresis on 2% agarose gels. 0.25 pmole of the electroeluted DNA and 20 pmoles of one PCR primer were denaturated by boiling for 3 min in the presence of detergent and immediately snap-cooled on dry ice to minimize reannealing. For sequencing of the DNA 10 ACi of 35SdATP, T7 DNA polymerase, and labeling mix were added to the annealing mixture. The resulting mixture was divided into four equal parts in tubes each containing another 'short'-termination mix. The sequencing reaction was kept at 37°C for five minutes. Then 2,u of solution containing 0.25 mM dNTP, 50 mM NaCl and detergent (see below) were added, and the reaction was left for five minutes at 37°C. The detergent concentration was maintained throughout all additions to the reaction mixtures. Several detergents were tested alone and in combination; DMSO 10%, NP-40 0.5%, Tween 20 0.5% each individually, as well as NP-40 0.5% and Tween 20 0.5% together. The 0.5% solution of Tween 20 and NP-40 was described elsewhere as yielding better Thernus aquaticus DNA polymerase activity in high temperature5 reactions. Figure 1 shows a comparison of sequences obtained following the above protocol with different detergents and, for comparison, with no detergent and DMSO. The sequence obtained without detergent was not readable, whereas the sequence obtained with DMSO gave signals of low density. The highest intensity of the signals and the lowest background at specific positions were found in the sequences obtained with NP40 or with the combination of NP40 and Tween 20. This effect is presumably due to the prevention of secondary structure formation and the suppression of DNA-annealing by detergents.