Search

A fiber probe has been developed that enables simultaneous acquisition of mid-infrared (MIR) and Raman spectra in the region of 3100-2600 cm -1 . Multimodal measurement is based on a proposed ZrO 2 crystal design at the tip of an attenuated total reflection (ATR) probe. Mid-infrared ATR spectra are obtained through a pair of chalcogenide infrared (CIR) fibers mounted at the base of the crystal. The probe enables both excitation and acquisition of a weak Raman signal from a portion of the sample in front of the crystal using an additional pair of silica fibers located in a plane perpendicular to the CIR fibers. The advantages of combining MIR and Raman spectra in a single probe have been discussed., (© 2024. The Author(s).)

In dairy, there is a growing request for laboratory analysis of the main nutrients in milk. High throughput of analysis, low cost, and portability are becoming critical factors to provide the necessary level of control in milk collection, processing, and sale. A portable desktop analyzer, including three light-emitting diodes (LEDs) in the visible light region, has been constructed and tested for the determination of fat content in homogenized and raw cow's milk. The method is based on the concentration dependencies of light scattering by milk fat globules at three different wavelengths. Univariate and multivariate models were built and compared. The red channel has shown the best performance in prediction. However, the joint use of all three LED signals led to an improvement in the calibration model. The obtained preliminary results have shown that the developed LED-based technique can be sufficiently accurate for the analysis of milk fat content. The ways of its further development and improvement have been discussed.

Pyrometry is widely used in science, medicine, and industry to measure the surface temperature of objects in a non-contact way. IR fibers are an ideal solution for the flexible delivery of thermal radiation emitted from objects inside a complex structure like internal organs inside the human body. Silver halide polycrystalline infrared fibers (PIR) are transparent in a spectral range of 3 - 18 µm, matching perfectly with the spectra of black body radiation for temperatures ranging from 20°C to 200°C. These fibers are non-toxic and allow small bending radii. They could become critical components in pyrometric systems for temperature-controlled laser surgeries. Here we discuss the ability of the PIR fibers for simultaneous laser power delivery and real-time temperature monitoring in laser surgery applications and demonstrate two different setups for this purpose., Competing Interests: The authors declare no conflicts of interest., (© 2022 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.)

Cancers of the abdominal cavity comprise one of the most prevalent forms of cancers, with the highest contribution from colon and rectal cancers (12% of the human population), followed by stomach cancers (4%). Surgery, as the preferred choice of treatment, includes the selection of adequate resection margins to avoid local recurrences due to minimal residual disease. The presence of functionally vital structures can complicate the choice of resection margins. Spectral analysis of tissue samples in combination with chemometric models constitutes a promising approach for more efficient and precise tumour margin identification. Additionally, this technique provides a real-time tumour identification approach not only for intraoperative application but also during endoscopic diagnosis of tumours in hollow organs. The combination of near-infrared and mid-infrared spectroscopy has advantages compared to individual methods for the clinical implementation of this technique as a diagnostic tool.

Limited operating bandwidth originated from strong absorption of glass materials in the infrared (IR) spectral region has hindered the potential applications of microstructured optical waveguide (MOW)-based sensors. Here, we demonstrate multimode waveguide regime up to 6.5 µm for the hollow-core (HC) MOWs drawn from borosilicate soft glass. Effective light guidance in central HC (diameter ∼240 µm) was observed from 0.4 to 6.5 µm despite high waveguide losses (0.4 and 1 dB/cm in near- and mid-IR, respectively). Additional optimization of the waveguide structure can potentially extend its operating range and decrease transmission losses, offering an attractive alternative to tellurite and chalcogenide-based fibers. Featuring the transparency in mid-IR, HC MOWs are promising candidates for the creation of MOW-based sensors for chemical and biomedical applications.

Laser light sources are routinely applied building blocks in optical sensor technologies. While lasers are emitting at a precisely defined wavelength within narrow emission bands, chem/bio-sensing applications frequently demand multi-wavelength illumination for addressing a series of species. Instead of using broadband radiation sources, it is a viable strategy to efficiently combine the beams emitted from different lasers to maintain the spectral brightness and yet cover extended wavelength regimes. In this study, substrate-integrated hollow waveguides (iHWGs) are reported as a versatile and efficient alternative compared to conventional beam combining concepts, especially for applications in the mid-infrared spectral regime leading to a highly efficient multi-port beam combiner-the iBEAM.

Matching pairs of tumor and non-tumor kidney tissue samples of four patients were investigated ex vivo using a combination of two methods, attenuated total reflection mid infrared spectroscopy and fluorescence spectroscopy, through respectively prepared and adjusted fiber probes. In order to increase the data information content, the measurements on tissue samples in both methods were performed in the same 31 preselected positions. Multivariate data analysis revealed a synergic effect of combining the two methods for the diagnostics of kidney tumor compared to individual techniques.

Optical spectroscopy is increasingly used for cancer diagnostics. Tumor detection feasibility in human kidney samples using mid- and near-infrared (NIR) spectroscopy, fluorescence spectroscopy, and Raman spectroscopy has been reported (Artyushenko et al., Spectral fiber sensors for cancer diagnostics in vitro. In Proceedings of the European Conference on Biomedical Optics, Munich, Germany, 21-25 June 2015). In the present work, a simplification of the NIR spectroscopic analysis for cancer diagnostics was studied. The conventional high-resolution NIR spectroscopic method of kidney tumor diagnostics was replaced by a compact optical sensing device constructively represented by a set of four light-emitting diodes (LEDs) at selected wavelengths and one detecting photodiode. Two sensor prototypes were tested using 14 in vitro clinical samples of 7 different patients. Statistical data evaluation using principal component analysis (PCA) and partial least-squares discriminant analysis (PLS-DA) confirmed the general applicability of the LED-based sensing approach to kidney tumor detection. An additional validation of the results was performed by means of sample permutation., Competing Interests: The authors declare no conflict of interest.