Search

Background This study examines the destiny of macromolecules in different full-scale biogas processes. From previous studies it is clear that the residual organic matter in outgoing digestates can have significant biogas potential, but the factors dictating the size and composition of this residual fraction and how they correlate with the residual methane potential (RMP) are not fully understood. The aim of this study was to generate additional knowledge of the composition of residual digestate fractions and to understand how they correlate with various operational and chemical parameters. The organic composition of both the substrates and digestates from nine biogas plants operating on food waste, sewage sludge, or agricultural waste was characterized and the residual organic fractions were linked to substrate type, trace metal content, ammonia concentration, operational parameters, RMP, and enzyme activity. Results Carbohydrates represented the largest fraction of the total VS (32–68%) in most substrates. However, in the digestates protein was instead the most abundant residual macromolecule in almost all plants (3–21 g/kg). The degradation efficiency of proteins generally lower (28–79%) compared to carbohydrates (67–94%) and fats (86–91%). High residual protein content was coupled to recalcitrant protein fractions and microbial biomass, either from the substrate or formed in the degradation process. Co-digesting sewage sludge with fat increased the protein degradation efficiency with 18%, possibly through a priming mechanism where addition of easily degradable substrates also triggers the degradation of more complex fractions. In this study, high residual methane production (> 140 L CH4/kg VS) was firstly coupled to operation at unstable process conditions caused mainly by ammonia inhibition (0.74 mg NH3-N/kg) and/or trace element deficiency and, secondly, to short hydraulic retention time (HRT) (55 days) relative to the slow digestion of agricultural waste and manure. Conclusions Operation at unstable conditions was one reason for the high residual macromolecule content and high RMP. The outgoing protein content was relatively high in all digesters and improving the degradation of proteins represents one important way to increase the VS reduction and methane production in biogas plants. Post-treatment or post-digestion of digestates, targeting microbial biomass or recalcitrant protein fractions, is a potential way to achieve increased protein degradation.

Optimization of the biogas generation process is important to achieve efficient degradation and high methane yield, and to reduce methane emissions from the digestate. In this study, serial digester systems with two or three biogas reactors were compared with a single reactor, with the aim of improving degree of degradation and methane yield from food waste and assessing adaptation of microbial communities to different reactor steps. All systems had the same total organic load (2.4 g VS/(L d)) and hydraulic retention time (55 days). Serial systems increased methane yield by >5% compared with the single reactor, with the majority of the methane being obtained from the first-step reactors. Improved protein degradation was also obtained in serial systems, with >20% lower outgoing protein concentration compared with the single reactor and increasing NH4+-N concentration with every reactor step. This resulted in separation of high ammonia (>384 mg NH3-N/L) levels from the main methane production, reducing the risk of methanogen inhibition. Methanosarcina dominated the methanogenic community in all reactors, but increases in the hydrogenotrophic genera Methanoculleus and Methanobacterium were observed at higher ammonia levels. Potential syntrophic acetate-oxidizing bacteria, such as MBA03 and Dethiobacteraceae, followed the same trend as the hydrogenotrophic methanogens. Phylum Bacteroidota family Paludibacteraceae was highly abundant in the first steps and then decreased abruptly, potentially linked to an observed decrease in degradation in the last-step reactors. Nevertheless, the results indicated a trend of increasing relative abundance of the potentially proteolytic genera Proteiniphilum and Fastidiosipila with successive reactor steps. Funding: Tekniska Verken i Linkoping AB; Biogas Research Center; Linkoping University; Swedish University of Agricultural Sciences; Swedish Energy Agency [35624- 2]

This study investigated the possibility to use thermophilic anaerobic high solid digestion of dewatered digested sewage sludge (DDS) at a wastewater treatment plant (WWTP) as a measure to increase total methane yield, achieve pasteurization and reduce risk for methane emissions during storage of the digestate. A pilot-scale plug-flow reactor was used to mimic thermophilic post-treatment of DDS from a WWTP in Linköping, Sweden. Process operation was evaluated with respect to biogas process performance, using both chemical and microbiological parameters. Initially, the process showed disturbance, with low methane yields and high volatile fatty acid (VFA) accumulation. However, after initiation of digestate recirculation performance improved and the specific methane production reached 46 mL CH4/g VS. Plug flow conditions were assessed with lithium chloride and the hydraulic retention time (HRT) was determined to be 19–29 days, sufficient to reach successful pasteurization. Degradation rate of raw protein was high and resulted in ammonia-nitrogen levels of up to 2.0 g/L and a 30% lower protein content in the digestate as compared to DDS. Microbial analysis suggested a shift in the methane producing pathway, with dominance of syntrophic acetate oxidation and the candidate methanogen family WSA2 by the end of the experiment. Energy balance calculations based on annual DDS production of 10 000 ton/year showed that introduction of high-solid digestion as a post-treatment and pasteurization method would result in a positive energy output of 340 MWh/year. Post-digestion of DDS also decreased residual methane potential (RMP) by>96% compared with fresh DDS. Funding agencies: Svensk Vatten Utveckling; Tekniska Verken i Linkoping AB; Biogas Research Center; Linkoping University; Swedish Energy AgencySwedish Energy Agency [35624-2]

During the process of pulp- and papermaking, large volumes of fibre-rich primary sludge are generated. Anaerobic digestion of primary sludge offers a substantial potential for methane production as an alternative approach to the inefficient energy recoveries by commonly used incineration techniques. However, a systematic study of the importance of upstream process techniques for the methane potential of pulp fibres is lacking. Therefore, biochemical methane potentials were determined at mesophilic conditions for 20 types of fibres processed by a variety of pulping and bleaching techniques and from different raw materials. This included fibres from kraft, sulphite, semi-chemical, chemical thermo-mechanical (CTMP) and thermo-mechanical pulping plants and milled raw wood. The pulping technique was clearly important for the methane potential, with the highest potential achieved for kraft and sulphite fibres (390–400 Nml CH4 g VS− 1 ). For raw wood and CTMP, hardwood fibres gave substantially more methane than the corresponding softwood fibres (240 compared to 50 Nml CH4 g VS− 1 and 300 compared to 160 Nml CH4 g VS− 1 , respectively). Nuclear magnetic resonance characterization of the organic content demonstrated that the relative lignin content of the fibres was an important factor for methane production, and that an observed positive effect of bleaching on the methane potential of softwood CTMP fibres was likely related to a higher degree of deacetylation and improved accessibility of the hemicellulose. In conclusion, fibres from kraft and sulphite pulping are promising substrates for methane production irrespective of raw material or bleaching, as well as fibres from CTMP pulping of hardwood. Funding agencies: Knut and Alice Wallenberg foundationKnut & Alice Wallenberg Foundation; Swedish Energy AgencySwedish Energy Agency [32802-2]; Scandinavian Biogas Fuels AB; Poyry AB; BillerudKorsnas AB; SCA; Fiskeby Board AB; Purac AB; Swedish Research Council FormasSwedi

Pretreatment of anaerobic digester samples by hydrochloric acid (HCl) resulted in removal of Fe-based mineral and coordination compounds, attenuating their interferences with solution-state nuclear ...

Aim: To evaluate the impact of video education on critical care nurses' knowledge and skills in using a behavioural pain assessment tool for intensive care patients and to explore the nurses' experiences with video education. Methods: Forty-eight nurses in one intensive care unit watched an educational video on the use of the Critical-Care Pain Observation Tool, then assessed pain in two patients with the tool and took a knowledge test. The researcher made parallel pain assessments. Interrater reliability of patients' pain assessment between nurses and the researcher was determined to examine nurses' skills in using the tool after education. Twenty nurses were interviewed about their experiences with the video education. Interviews were analysed with deductive thematic analysis. Results: The knowledge test scores indicated that the nurses learned the principles of how to use the tool. The interrater reliability of pain assessments reached a moderate level of agreement during the painful procedure, with a weighted kappa coefficient value of 0.48, CL [0.37, 0.58]. The nurses perceived video education positively, but requested additional interaction. Conclusions: Video education is useful in teaching the principles of using a pain assessment tool. Additional clinical training is required for nurses to reach adequate skills in using the tool. (C) 2017 Elsevier Ltd. All rights reserved.

Background Waste lipids are attractive substrates for co-digestion with primary and activated sewage sludge (PASS) to improve biogas production at wastewater treatment plants. However, slow conversion rates of long-chain fatty acids (LCFA), produced during anaerobic digestion (AD), limit the applicability of waste lipids as co-substrates for PASS. Previous observations indicate that the sulfide level in PASS digesters affects the capacity of microbial communities to convert LCFA to biogas. This study assessed the microbial community response to LCFA loads in relation to sulfide level during AD of PASS by investigating process performance and microbial community dynamics upon addition of oleate (C18:1) and stearate (C18:0) to PASS digesters at ambient and elevated sulfide levels. Results Conversion of LCFA to biogas was limited (30% of theoretical biogas potential) during continuous co-digestion with PASS, which resulted in further LCFA accumulation. However, the accumulated LCFA were converted to biogas (up to 66% of theoretical biogas potential) during subsequent batch-mode digestion, performed without additional substrate load. Elevated sulfide level stimulated oleate (but not stearate) conversion to acetate, but oleate and sulfide imposed a synergistic limiting effect on acetoclastic methanogenesis and biogas formation. Next-generation sequencing of 16S rRNA gene amplicons of bacteria and archaea showed that differences in sulfide level and LCFA type resulted in microbial community alterations with distinctly different patterns. Taxonomic profiling of the sequencing data revealed that the phylum Cloacimonetes is likely a key group during LCFA degradation in PASS digesters, where different members take part in degradation of saturated and unsaturated LCFA; genus W5 (family Cloacimonadaceae) and family W27 (order Cloacimonadales), respectively. In addition, LCFA-degrading Syntrophomonas, which is commonly present in lipid-fed digesters, increased in relative abundance after addition of oleate at elevated sulfide level, but not without sulfide or after stearate addition. Stearate conversion to biogas was instead associated with increasing abundance of hydrogen-producing Smithella and hydrogenotrophic Methanobacterium. Conclusions Long-chain fatty acid chain saturation and sulfide level are selective drivers for establishment of LCFA-degrading microbial communities in municipal sludge digesters.

The production processes of the pulp and paper industry often run in campaigns, leading to large variations in the composition of wastewaters and waste sludges. During anaerobic digestion (AD) of these wastes, the viscosity or the production of extracellular polymeric substances (EPS) and soluble microbial products (SMP) may be affected, with the risk of foam formation, inefficient digester mixing or poor sludge dewaterability. The aim of this study was to investigate how viscosity and production of EPS and SMP during long-term AD of pulp and paper mill sludge is affected by changes in organic loading rate (OLR) and hydraulic retention time (HRT). Two mesophilic lab-scale continuous stirred tank reactors (CSTRs) were operated for 800 days (R1 and R2), initially digesting only fibre sludge, then co-digesting fibre sludge and activated sludge. The HRT was lowered, followed by an increase in the OLR. Reactor fluids were sampled once a month for rheological characterization and analysis of EPS and SMP. The production of the protein fraction of SMP was positively correlated to the OLR, implicating reduced effluent qualities at high OLR. EPS formation correlated with the magnesium content, and during sulphate deficiency, the production of EPS and SMP increased. At high levels of EPS and SMP, there was an increase in viscosity of the anaerobic sludges, and dewatering efficiency was reduced. In addition, increased viscosity and/or the production of EPS and SMP were important factors in sludge bulking and foam formation in the CSTRs. Sludge bulking was avoided by more frequent stirring. Electronic supplementary material The online version of this article (10.1007/s00449-019-02224-4) contains supplementary material, which is available to authorized users.

Anaerobic digestion (AD) is an established process for integrating waste management with renewable energy and nutrient recovery. Much of the research in this field focuses on the utilisation of new substrates, yet their effects on operational aspects such as fluid behaviour and power requirement for mixing are commonly overlooked, despite their importance for process optimisation. This study analysed rheological characteristics of samples from 21 laboratory-scale continuous stirred-tank biogas reactors (CSTBRs) digesting a range of substrates, in order to evaluate substrate effect on mixing efficiency and power demand through computational fluid dynamics (CFD). The results show that substrate and process parameters, such as solids content and organic loading, all have a significant effect on CSTBR fluid rheology. The correlation levels between rheological and process parameters were different across substrates, while no specific fluid behaviour patterns could be associated with substrate choice. Substrate should thus be considered an equally important rheology effector as process parameters. Additional substrate-related parameters should be identified to explain the differences in correlations between rheological and process parameters across substrate groups. The CFD modelling revealed that the rheology differences among the AD processes have significant implications for mixing efficiency and power demand of the CSTBRs, highlighting the importance of considering the substrate-induced effects on CSTBR rheology before including a new substrate. Funding agencies: European CommissionEuropean Commission Joint Research Centre [316838 ATBEST]; Swedish Research Council FormasSwedish Research CouncilSwedish Research Council Formas [2016-01054]; Swedish Innovation Agency [2008-139]

Understanding fluid rheology is important for optimal design and operation of continuous stirred-tank biogas reactors (CSTBRs) and is the basis for power requirement estimates. Conflicting results have been reported regarding the applicability of total solid (TS) and/or total volatile solid (TVS) contents of CSTBR fluids as proxies for rheological properties. Thus, the present study investigates relationships between rheological properties of 12 full-scale CSTBR fluids, their substrate profiles, and major operational conditions, including pH, TS and TVS contents, organic loading rate, hydraulic retention time, and temperature. Rheology-driven power requirements based on various fluid characteristics were evaluated for a general biogas reactor setup. The results revealed a significant correlation only between the rheological fluid properties and TS or TVS contents for sewage sludge digesters and thermophilic co-digesters (CD), but not for mesophilic CD. Furthermore, the calculated power requirements for pumping and mixing, based on the various fluid characteristics of the studied CSTBRs, varied broadly irrespective of TS and TVS contents. Thus, this study shows that the TS and/or TVS contents of digester fluid are not reliable estimators of the rheological properties in CSTBRs digesting substrates other than sewage sludge.

Background Nurses play an important role in children's pain assessment and management because they spend the majority of the time with them and provide care on a 24-hour basis. However, research studies continue to report on nurses' inadequate assessment and management of children's pain, which may be partly attributed to their insufficient education in this area. Objectives This integrative review sought to examine the effect of strategies used in educating nurses on pediatric pain assessment and management. Design An integrative review. Data Sources Cumulative Index to Nursing and Allied Health Literature, Cochrane, PubMed/ Medline and Scopus. Review/Analysis Methods Four databases were searched up to February 2018 based on a prescribed eligibility criteria. The review included 37 studies with varied methodologic quality. Results Our findings revealed that various types of educational strategies improve nurses’ knowledge, attitudes, and practice of pain assessment, management, and/or documentation. Conclusions Developing a responsive program that includes expectations of beneficiaries, integrating it into existing facility training systems and delivering it through multidisciplinary collaboration, offers the benefit of securing sustainability of the educational gains.

Pretreatment of anaerobic digester samples by hydrochloric acid (HCl) resulted in removal of Fe-based mineral and coordination compounds, attenuating their interferences with solution-state nuclear magnetic resonance (NMR) spectroscopic characterization of the solid phase organic matter. Substrate (influent) and digestate (effluent) samples from two full-scale anaerobic digesters, designated CD (co-digester) and SSD (sewage sludge digester), were investigated. Pretreatment of CD samples with 0.2-2.0 mol l

Sweden has the ambition to increase its annual biogas production from the current level of 1.9 to 15 TWh by 2030. The unused capacity of existing anaerobic digesters at wastewater treatment plants is among the options to accomplish this goal. This study investigated the feasibility of utilizing the organic fraction of municipal solid waste (OFMSW) as a co-substrate, with primary and waste-activated sewage sludge (PWASS) for production of biogas, corresponding to 3:1 ratio on volatile solid (VS) basis. The results demonstrated that co-digestion of OFMSW with PWASS at an organic loading rate of 5 gVS l−1 day−1 has the potential to increase the biogas production approximately four times. The daily biogas production increased from 1.0 ± 0.1 to 3.8 ± 0.3 l biogas l−1 day−1, corresponding to a specific methane production of 420 ± 30 Nml methane gVS−1 during the laboratory experiment. Co-digestion of OFMSW with PWASS showed a 50:50 distribution of hydrogenotrophic and aceticlastic methanogens in the digester and enhanced the turnover kinetics of intermediate products (acetate, propionate, and oleate). Practical limitations potentially include the need for sludge dewatering to maintain a sufficient hydraulic retention time (17 days in this study), as well as additional energy consumption for mixing due to an increased sludge apparent viscosity (from 1.8 ± 0.1 to 45 ± 4.8 mPa*s in this study) at elevated OFMSW-loading rates.

Loading macroalgae into existing anaerobic digestion (AD) plants allows us to overcome challenges such as low digestion efficiencies, trace elements limitation, excessive salinity levels and accumulation of volatile fatty acids (VFAs), observed while digesting algae as a single substrate. In this work, the co-digestion of the brown macroalgae Saccharina latissima with mixed municipal wastewater sludge (WWS) was investigated in mesophilic and thermophilic conditions. The hydraulic retention time (HRT) and the organic loading rate (OLR) were fixed at 19 days and 2.1 g l-1 d-1of volatile solids (VS), respectively. Initially, WWS was digested alone. Subsequently, a percentage of the total OLR (20%, 50% and finally 80%) was replaced by S. latissima biomass. Optimal digestion conditions were observed at medium-low algae loading (=50% of total OLR) with an average methane yield close to [Formula: see text] and [Formula: see text] in mesophilic and thermophilic conditions, respectively. The conductivity values increased with the algae loading without inhibiting the digestion process. The viscosities of the reactor sludges revealed decreasing values with reduced WWS loading at both temperatures, enhancing mixing properties.

With the final aim of reducing the energy consumption and increase the methane production at Swedish pulp and paper mills, the methane potential of 62 wastewater effluents from 10 processes at seven pulp and/or paper mills (A-G) was determined in anaerobic batch digestion assays. This mapping is a first step towards an energy efficient and more sustainable utilization of the effluents by anaerobic digestion, and will be followed up by tests in lab-scale and pilot-scale reactors. Five of the mills produce kraft pulp (KP), one thermo-mechanical pulp (TMP), two chemical thermo-mechanical pulp (CTMP) and two neutral sulfite semi-chemical (NSSC) pulp. Both elementary and total chlorine free (ECF and TCF, respectively) bleaching processes were included. The effluents included material from wood rooms, cooking and oxygen delignification, bleaching (often both acid- and alkali effluents), drying and paper/board machinery as well as total effluents before and after sedimentation. The results from the screening showed a large variation in methane yields (percent of theoretical methane potential assuming 940 NmL CH4 per g TOC) among the effluents. For the KP-mills, methane yields above 50% were obtained for the cooking effluents from mills D and F, paper machine wastewater from mill D, condensate streams from mills B, E and F and the composite pre-sedimentation effluent from mill D. The acidic ECF-effluents were shown to be the most toxic to the AD-flora and also seemed to have a negative effect on the yields of composite effluents downstream while three of the alkaline ECF-bleaching effluents gave positive methane yields. ECF bleaching streams gave higher methane yields when hardwood was processed. All TCF-bleaching effluents at the KP mills gave similar degradation patterns with final yields of 10-15% of the theoretical methane potential for four of the five effluents. The composite effluents from the two NSSC-processes gave methane yields of 60% of the theoretical potential. The TMP mill (A) gave the best average yield with all six effluents ranging 40-65% of the theoretical potential. The three samples from the CTMP process at mill B showed potentials around 40% while three of the six effluents at mill G (CTMP) yielded 45-50%.

Mixing plays an important role in the Biochemical Methane Potential (BMP) test, but only limited efforts have been put into it. In this study, various mixing strategies were applied to evaluate the influences on the BMP test, i.e., no mixing, shaking in water bath, shake manually once per day (SKM), automated unidirectional and bidirectional mixing. The results show that the effects of mixing are prominent for the most viscous substrate investigated, as both the highest methane production and highest maximal daily methane production were obtained at the highest mixing intensity. However, the organic removal efficiencies were not affected, which might offer evidence that mixing helps the release of gases trapped in digester liquid. Moreover, mixing is required for improved methane production when the digester content is viscous, conversely, mixing is unnecessary or SKM might be sufficient for the BMP test if the digester content is quite dilute or the substrate is easily degraded.

Codigesting fats, oils, and greases with municipal wastewater sludge can greatly improve biomethane recovery at wastewater treatment facilities. Process loading rates of fats, oils, and greases have been previously tested with little knowledge of the digester microbial community structure, and high transient fat loadings have led to long chain fatty acid (LCFA) accumulation and digester upsets. This study utilized recently-developed quantitative PCR assays for syntrophic LCFA-degrading bacteria along with 16S amplicon sequencing to relate changes in microbial community structure to LCFA accumulation during transient loading increases to an anaerobic codigester receiving waste restaurant oil and municipal wastewater sludge. The 16S rRNA gene concentration of the syntrophic β-oxidizing genus Syntrophomonas increased to ∼15% of the Bacteria community in the codigester, but stayed below 3% in the control digester that was fed only wastewater sludge. Methanosaeta and Methanospirillum were the dominant methanogenic genera enriched in the codigester, and together comprised over 80% of the Archaea community by the end of the experimental period. Constrained ordination showed that changes in the codigester Bacteria and Archaea community structures were related to measures of digester performance. Notably, the effluent LCFA concentration in the codigester was positively correlated to the specific loading rate of waste oil normalized to the Syntrophomonas 16S rRNA concentration. Specific loading rates of 0–1.5 × 10−12 g VS oil/16S gene copies-day resulted in LCFA concentrations below 30 mg/g TS, whereas LCFA accumulated up to 104 mg/g TS at higher transient loading rates. Based on the community-dependent loading limitations found, enhanced biomethane production from high loadings of fats, oils and greases can be achieved by promoting a higher biomass of slow-growing syntrophic consortia, such as with longer digester solids retention times. This work also demonstrates the potential for controlling the loading rate of fats, oils, and greases based on the analysis of the codigester community structure, such as with quantitative PCR measurements of syntrophic LCFA-degrading bacteria abundance.

Kraft fibre sludge from the pulp and paper industry constitutes a new, widely available substrate for thebiogas production industry, with high methane potential. In this study, anaerobic digestion of kraft fibresludge was examined by applying continuously stirred tank reactors (CSTR) with sludge recirculation.Two lab-scale reactors (4L) were run for 800 days, one on fibre sludge (R1), and the other on fibre sludgeand activated sludge (R2). Additions of Mg, K and S stabilized reactor performance. Furthermore, theCa:Mg ratio was important, and a stable process was achieved at a ratio below 16:1. Foaming was abatedby short but frequent mixing. Co-digestion of fibre sludge and activated sludge resulted in more robustconditions, and high-rate operation at stable conditions was achieved at an organic loading rate of 4 gvolatile solids (VS) L1 day1, a hydraulic retention time of 4 days and a methane production of230 ± 10 Nm L per g VS. Funding agencies: Swedish Energy Agency [32802-1]; Scandinavian Biogas Fuels AB; Poyry AB; BillerudKorsnas AB; SCA; Fiskeby Board AB; Purac AB

Plastics debris in the marine environment, including resin pellets, fragments and microscopic plastic fragments, contain organic contaminants, including polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons, petroleum hydrocarbons, organochlorine pesticides (2,2′-bis( p- chlorophenyl)-1,1,1-trichloroethane, hexachlorinated hexanes), polybrominated diphenylethers, alkylphenols and bisphenol A, at concentrations from sub ng g –1 to µg g –1 . Some of these compounds are added during plastics manufacture, while others adsorb from the surrounding seawater. Concentrations of hydrophobic contaminants adsorbed on plastics showed distinct spatial variations reflecting global pollution patterns. Model calculations and experimental observations consistently show that polyethylene accumulates more organic contaminants than other plastics such as polypropylene and polyvinyl chloride. Both a mathematical model using equilibrium partitioning and experimental data have demonstrated the transfer of contaminants from plastic to organisms. A feeding experiment indicated that PCBs could transfer from contaminated plastics to streaked shearwater chicks. Plasticizers, other plastics additives and constitutional monomers also present potential threats in terrestrial environments because they can leach from waste disposal sites into groundwater and/or surface waters. Leaching and degradation of plasticizers and polymers are complex phenomena dependent on environmental conditions in the landfill and the chemical properties of each additive. Bisphenol A concentrations in leachates from municipal waste disposal sites in tropical Asia ranged from sub µg l –1 to mg l –1 and were correlated with the level of economic development.