Search

In recent years, battery technology has been greatly improved and some types of battery chainsaws are currently comparable with light-type petrol machines, suggesting their possible introduction into forest operations. In this context, the aim of this study was to test and compare the performance, in a Douglas-fir thinning, of two chainsaws similar in terms of weight and power, the Stihl MS 220 CB battery-powered saw and the Stihl MS 201 CM petrol-powered saw, measuring the working times and calculating the productivities. The results showed that, within a working day (about 6 h gross time), an average of 15 trees of 0.56 m3 was felled in each area. No statistically significant differences between the two chainsaws were found in terms of gross and net productivity; and the same result was obtained when focusing the analysis only on operations conducted using the chainsaws. Moreover, the average battery charge duration was 1.04 h, while the full tank duration for the petrol model was 1.12 h. In conclusion, our study demonstrates that, on the basis of their performance, battery chainsaws can be introduced into thinning operations, but a solution is needed to manage batteries in the forest, since the actual need is for 7–8 charges per workday.

Information and Communication Technologies (ICT) play a key role for improving the implementation of sustainable forest management at local, regional, and global level. The ICT potential to easily exploit a wider and more up-to-date set of information on the economic, environmental, and so- cial value of forests is of relevant help for the daily work of technicians, land owners, and companies in boosting the efficiency and effectiveness of forest management. The concept of “Precision Forestry” (PF) was developed from the early 2000s, as a branch of precision farming or precision agriculture. PF includes the use of ICT, remote and proximal sensing technologies, and other devices to coordinate and control several processes on a spatial scale (“Precision”) for monitoring, planning, and managing forest resources (“Forestry”). The aim of this monography is to collect and describe some of the most important PF experiences applied or potential- ly useful for the Italian forestry sector. It may represent a reference guide for the stakeholders, such as forest owners, professional technicians, public administrators, and policy makers. The book includes eleven chapters reviewing the main tech- nological tools available in the Italian context and the most recent advances of ICT in forestry, also focusing on the strengths and weaknesses of their practical implementation. The opportunities and challenges of implementing PF meth- ods, practices and technologies are also discussed. In the first two chapters the precision forestry concept and its historical development are introduced. In the third chap- ter some basic elements of ICT, GIS, Global Navigation Satellite Systems (GNSS), remote/proximal sensing, and related technologies which are essential for a better compre- hension of PF applications are recalled. In chapter 4 recent advances in large scale forest inventories with a focus on mapping and on the spatial estimation of forest variables integrating field surveys and multisource re- motely sensed data are described. Current advancements in the acquisition of field information including Terrestrial La- ser Scanning (TLS), new digital dendrometers, tree-talkers, terrestrial cameras, and APP for portable devices such as smartphones or tablets for dendrometric tree measures and new citizen science applications to support quantitative and qualitative spatial estimation of forest variables over large areas (i.e., forest health, fuel types) are also presented. The chapter ends up with the description of some experiences in the implementation of Forest Information Systems in Italy to provide a simple open-access to such new generation of spatial forest information. In chapter 5 PF tools, instruments, and technologies to sup- port sustainable forest management are illustrated. APPs developed to acquire field plots data to simulate manage- ment operations, the application of photogrammetric tech- nologies from Unmanned Aerial Vehicles and TLS data for monitoring with high-spatial scale forest monitoring and for acquiring indicators at single tree level are presented. A de- tailed description of new user-friendly tools for forest roadplanning, design and construction, as well as forest opera- tion planning is also included. Precision forest tree farming (with particular reference to poplar cultivation), useful to promote and increase the prof- itability and sustainability of forest plantations within the Italian context is described in chapter 6. The innovation and enhancement within the supply chain of wood plantations (from planting to harvesting, including monitoring and identification of stress) by soil proximal sensing techniques, Early Warning Systems, and specific software are highlight- ed. Considering the even higher market demands, promoted by the large-scale planting programs for climate changes mit- igation and the demands for propagation material for en- vironmental recovery, innovative techniques and methods supported by ICT in the forest nursery sector are described in chapter 7. In chapter 8 available technologies related to precision har- vesting are analyzed and described taking into consideration the wood chain efficiency, by means of improved commu- nications between the owner/buyer and operators as well as among machineries used in forest operations, health and safety of forest operators, environmental impacts mitigation and recovery, and operators training. Advanced communi- cation systems and sensors for the exchange of data and information between machines, machine-equipments and/or machine-operators, teleoperations and automation are also described. Chapters 9 and 10 are related to wood products traceabil- ity, timber quality assessment as well as the technologies for the optimization of wood transformation processes. The concepts of wood product traceability and tracing, togeth- er with latest digital technologies for the identification and tracking of the logs (i.e., fingerprinting and RFID), are de- tailly reported. Chapter 11 is finally dedicated to the relationship between the EU policy framework and the digitalization process in both agricultural and forestry sectors. The book summarizes, under a proactive and homogeneous framework, PF methods, tools and technologies in relation with the digital transition of the Italian forestry sectors. The authors hope this book will be useful for improving the implementation of sustainable forest management practic- es at all levels in Italy, providing a comprehensive review useful for policy makers, technicians, forestry owners and students.

The recent technological development of batteries has allowed the production of powerful tools that are also used in forestry operations. For this reason, this study aimed to compare the performance of two latest chainsaw models in a conifer clear-cut. The examined chainsaws, the battery-powered Stihl MSA 300 and the petrol-powered MS 261 C-M, have comparable power and weight. The overall working times were recorded and then gross, net and felling/processing productivities were quantified. Our findings reported that in a working day (7.4 h gross time), each chainsaw felled and processed an average of 20 trees of 0.64 m3 with an average diameter at breast height of 28 cm. Considering the net productivity, no statistically significant differences were recorded between the two chainsaws. Investigating the productivities on operations conducted using the chainsaws, the battery chainsaw showed a lower average tree-processing productivity than that recorded for the petrol chainsaw. On average, the battery duration was 0.88 h, while the petrol tank duration was 0.97 h. Our study shows that battery chainsaws have great potential in forestry operations; however, considering the actual need for 8 charges per standard workday, optimizing battery management is an important objective for future work.

Cork oak (Quercus suber L.) is a tree species native to the western Mediterranean Basin (EUFORGEN 2019). Cork oak forests are human-shaped ecosystems that have to be managed to be preserved in a long-term perspective. Cork oak stands range from closed forests to open woodlands, provide high ecosystem services, mainly through cork production, support high biodiversity and provide carbon storage and water regulation services. Due to their important ecological role, these ecosystems are listed in the European Habitats Directive (Habitat 9330: Quercus suber forests, EEC, 1992). In the last years, especially in Italy, cork oak stands are undergoing a relevant regression due to the decline of traditional management. The most extensive cork oak forests occur in Sardinia, followed by Sicily, Tuscany and Calabria. In Sicily, this tree covers about 19,000 ha (about 7% of total regional forest cover), from sea level up to 1,000 m a.s.l (Camerano et al. 2011). Also in this region, the abandonment of traditional management and recurrent wildfires has caused a progressive decline of cork oak forests and widespread degraded conditions. In this work, we analysed the recovery of a cork oak forest through the improvement of management in a study area where cork oak is mixed with stone pine (Pinus pinea L.). To improve the vitality of cork oak and increase cork production, the thinning of the pine stand was carried out. The silvicultural treatments were carried out without a total removal of pine trees and uncovering of the soil but selecting the pine trees that effectively hindered the cork tree. In the future, the response of the forest system will be evaluated in terms of natural regeneration and other cautious, continuous and capillary interventions may be proceeded. After felling, trees were processed in 2-meter length assortments while thin material, tree tops and branches were chipped and left on the ground. We collected data on: 1) site conditions (topography, soil conditions and understory vegetation), 2) stand characteristics (adult tree layer, species composition, density, structure) and 3) time for felling and logging the stone pine. We also evaluated the quantity of the wood material obtained. This study provides technical recommendations that can support sustainable management and restoration efforts in Mediterranean cork oak landscapes. This type of management in addition to produce cork will allow high level of biodiversity and socio-economic benefits.

The chapter is part of the book "Wood in Sport Equipment - heritage, present, perspective". It is focused on the use of wood in two sports included in Olympics program: rowing and flatwater.

Chainsaw operators are exposed to many hazards that can lead to health problems. The two most frequently documented ergonomics threats in the use of chainsaws are noise and vibration exposure. Since the use of battery chainsaws is increasing due to the growing improvements in battery life and power, the study aims to compare the difference in terms of noise emission and vibration levels of the following two new models of chainsaws: the battery-powered Stihl MSA 300 and the petrol-powered Stihl MS 261 C-M. Black pine and European beech logs were cross-cut in order to evaluate both noise and vibration exposure. The results show that the use of battery-powered chainsaws, in comparison to the petrol one, can reduce the daily vibration exposure by more than 51% and the noise dose by 11%. The daily vibration exposure of 1.60 ms−2 and 1.67 ms−2 measured for the battery-powered chainsaw on Black pine and on European beech, respectively, is far from the daily exposure action value set by the EU directives for health and safety requirements (2.5 ms−2). On the contrary, the daily noise exposure for the battery chainsaw was 93 dB(A), exceeding the upper exposure action value of 85 dB(A).

Purpose of Review Ground-based mechanized forest operations can cause severe soil disturbances that are often long lasting and detrimental to the health of forested ecosystems. To reduce these soil disturbances, focus is being increasingly directed at identifying and using appropriate mitigation techniques. This systematic review considered 104 scientific articles and reported the main findings according to four core themes: terrain-related factors, operational planning, machine modifications, and types of amendments used to mitigate machine-induced soil impacts. Recent Findings For terrain-related factors, most severe disturbances occur on machine operating trails exceeding 20% slope and that soil bulk density and rut depth show greater increases in fine-textured soils. When considering operational planning, trafficability maps proved to be helpful in reducing the frequency and magnitude of soil damages as well as the length of trails needed within harvest sites, especially if they are regularly updated with weather information. Machine modifications, through high flotation tires, use of extra bogie axle, lower inflation pressure, and use of steel flexibles tracks, are highly researched topics because of the considerable upside in terms of machine ground pressure distribution and increased traction. Two main types of amendments emerged to mitigate soil disturbances: brush mats and mulch cover. Brush mats created from harvesting debris can spread the load of a machine to a greater area thereby lowering peak loads transferred to the soil. Brush mats of 15–20 kg m−2 are being recommended for adequate soil protection from harvesting operations. Summary To conclude, we outline recommendations and strategies on the use of soil mitigation techniques within cut-to-length forest operations. New research opportunities are also identified and discussed. Considering single factors causing machine-induced soil disturbances remains important but there is a pressing need for having a multi-disciplinary approach to tackle the complex problems associated with machine/soil/plant interactions.

Intensive forestry operations may cause soil compaction, plastic soil disturbances and rutting, which are responsible for undesirable effects on soils, vegetation and water bodies. Despite the numerous studies aimed to identify the main factors affecting soil damages, it still remains unclear whether wood extraction methods and driving direction (uphill or downhill) may affect the impacts of forest machines. This research analyses soil compaction and soil penetration resistance as well as rutting from forwarding and skidding using the same farm tractor in up- and downhill wood extraction. Rutting was estimated by 3D soil reconstruction derived by portable laser scanning (PLS) and close-range photogrammetry using structure for motion (SfM). Our findings showed that the direction of extraction did not affect soil damage severity during forwarding on a 25% slope. On the contrary, in order to reduce soil compaction, downhill skidding is preferable to uphill skidding. The results showed that the pressure on the ground caused by vehicles can be distributed horizontally, thus affecting also the soil between the wheel tracks. The soil bulk density inside the tracks after 10 forwarding passes increased by 40% and with 23% between the wheel tracks. The soil displacement in skidding trails (7.36 m3 per 100 m of trail) was significantly higher than in forwarding (1.68 m3 per 100 m of trail). The rutting estimation showed no significant difference between the PLS and SfM methods, even comparing the two digital surface models (DSMs) obtained, even if photogrammetry was preferred for technical and practical reasons.

The use of battery tools is very common in many fields of work. In fact, the electric engine and batteries have several advantages over traditional endothermic engines, including low emissions, in terms of pollutants, vibration and noise. In this context, the chainsaw market started producing electric models powered by batteries. These machines can be useful in forestry, but information on their performance is scarce. The aim of this work was to compare the performance, in terms of cutting times, of three Stihl chainsaw models: the MS 220C-B (battery powered), and the MS 201 C-M and MS 261 C-M (both petrol powered). The study was carried out on five different wood species, also taking into consideration the presence/absence of wood defects in the cutting. More than 800 cuts on 15 m × 15 cm wood beams were video recorded, and the cutting times were later obtained to a resolution of 4/100 of a sec, using video-editing software. The results showed a poorer performance of the battery chainsaw than the petrol chainsaws, especially on certain wood species. However, this difference has been reduced when compared with older models. In conclusion, battery chainsaws need some additional improvements to be introduced into forestry, but their high potential is evident.

At forest sites, phytotoxic tropospheric ozone (O3) can be monitored with continuously operating, active monitors (AM) or passive, cumulative samplers (PM). For the first time, we present evidence that the sustainability of active monitoring is better than that of passive sensors, as the environmental, economic, and social costs are usually lower in the former than in the latter. By using data collected in the field, environmental, social, and economic costs were analyzed. The study considered monitoring sites at three distances from a control station in Italy (30, 400, and 750 km), two forest types (deciduous and Mediterranean evergreen), and three time windows (5, 10, and 20 years of monitoring). AM resulted in more convenience than PM, even after 5 years, in terms of O3 depletion, global warming, and photochemical O3 creation potential, suggesting that passive monitoring of ozone is not environmentally sustainable, especially for long time periods. AM led to savings ranging from a minimum of EUR 9650 in 5 years up to EUR 94,796 in 20 years in evergreen forests. The resulting social cost of PM was always higher than that of AM. The present evaluation will help in the decision process for the set-up of long-term forest monitoring sites dedicated to the protection of forests from O3.

The effective implementation of sustainable forest management depends largely on carrying out forest operations in a sustainable manner. Climate change, as well as the increasing demand for forest products, requires a re-thinking of forest operations in terms of sustainability. In this context, it is important to understand the major driving factors for the future development of forest operations that promote economic, environmental and social well-being. The main objective of this paper is to identify important issues concerning forest operations and to propose a new paradigm towards sustainability in a changing climate, work and environmental conditions. Previously developed concepts of forest operations are reviewed, and a newly developed concept - Sustainable Forest Operations (SFO), is presented. Five key performance areas to ensure the sustainability of forest operations include: (i) environment; (ii) ergonomics; (iii) economics; (iv) quality optimization of products and production; and (v) people and society. Practical field examples are presented to demonstrate how these five interconnected principles are relevant to achieving sustainability, namely profit and wood quality maximization, ecological benefits, climate change mitigation, carbon sequestration, and forest workers' health and safety. The new concept of SFO provides integrated perspectives and approaches to effectively address ongoing and foreseeable challenges the global forest communities face, while balancing forest operations performance across economic, environmental and social sustainability. In this new concept, we emphasize the role of wood as a renewable and environmentally friendly material, and forest workers' safety and utilization efficiency and waste management as additional key elements of sustainability.

It is very important for managers to plan a road network that meets all the requirements for tourism development and management. The aim of this study was to evaluate and modify an existing road network for tourism purposes in the Arasbaran protected area. First, the map layers of effective criteria were prepared in GIS and were standardized by a fuzzy logic approach and finally combined considering their relative importance weights obtained through pair-wise comparison technique. A suitability map was then acquired. After that, 14 different scenarios of road network were designed to access the recreational area using PEGGER extension in ArcView. Then, they were evaluated in terms of technical, environmental, and socio-economic criteria to achieve the optimal-designed road network. Moreover, the existing road network was modified according to the optimal-designed road scenario. Finally, a modified version of the existing road network was proposed for tourism development and management in the Arasbaran region. Regarding the results, the slope criterion with a value of 0.289 was identified as the most important factor in providing a suitability map for road planning. The seventh scenario, with a road density of 3.34 m ha−1 and accessibility (hard) of 64.68%, was chosen as the optimal option to modify the existing road network due to the best performances in terms of minimum costs and environmental impacts on the basis of the highest value per unit length (72.26). According to the assessments and chi-square test comparison, the optimal-designed road network and the proposed road network were identified as better alternatives compared to the existing road. Based on this work, it can be concluded that the combination of GIS-MCDM approaches can properly assist in tourism planning and management.

In 1999, the European Union proclaimed hardwood dust carcinogenic based on the classification of the International Agency for Research on Cancer (IARC) issued in 1995. The operational exposure limit (OEL) for inhalable wood dust has been set to 5 mg m-3 by EU directives, though in different countries the OEL ranges from 1 to 5 mg m-3. The objective of this study was to determine the exposure to wood dust of forest workers in chainsaw cutting and processing and suggest possible countermeasures. The study took into consideration different silvicultural treatments (coppice clear cut, conifer thinning, conifer pruning, and sanitary cut) and chainsaw fuel (normal two-stroke gasoline mix and two alkylate fuels). All the forest operations were carried out in forests located in Central Italy, on the Apennine mountain range. During the tests, 100 samples were collected by means of personal SKC Button Sampler (one sample per worker per day). The results showed that exposure to wood dust varied widely with forest operation type, while no significant difference were found for different type of chainsaw fuel. The average wood dust concentration was about 1.5 mg m-3 for all operations except coppicing, which showed a mean level of about 2.1 mg m-3. About 93% of the samples showed a concentration lower than 3 mg m-3, and in only two samples (one in conifer pruning and one in clear cut in coppice), the concentration was slightly higher than 5 mg m-3.

Several studies investigated soil disturbances caused on skid trails by forest logging. However, there is still a lack of knowledge about the severity and the distance of disturbances along both sides from the trails. The aims of this study were: i) to investigate the changes in physical and chemical properties of soil along the sides of skidding trails, ii) to measure the effects of soil compaction on of maple seedlings growth. Two levels of trail gradient (&lt, 20% and &gt, 20 %), four levels of traffic frequency (3, 8, 15, and 30 passes) and four distance buffer strip zones (0.5 m intervals from 0 to 2 m in distance) on both sides of skid trail edges were analyzed. Each treatment included three replicate plots. In order to investigate the effect of compaction on seedlings emergence and growth, maple seeds were sown after logging. The results highlighted significant changes in physical and chemical properties of soil for each traffic frequency in the closest buffer strip (from 0 to 0.5 m from the skid trail edges). The largest changes in soil properties were identified at 0.5 m distance zones for a slope gradient &gt, 20% after 3, 8, 15, and 30 skidding cycles. The highest changes were recorded on slope category &gt, 20%. The higher the soil compaction the lower the germination rate, root length, and stem height of seedlings.

Forest roads play a key-role in fire fighting activities. In fact, all ground-based activities are strictly related to the presence of forest roads as access to fire edge. In spite of this important role, forest roads are often planned and built without considering their use in fire fighting, and this also occurs in literature, where few studies are dedicated to the importance of forest roads in fire fighting. A well-developed and well-maintained forest road network is the answer to different needs in fire management. The objective of this review is to clarify basic principles for obtaining efficient road network also for fire fighting, collecting, defining and resuming the main roles, the most important aspects and the reported experiences to be taken into account in forest road network planning and maintenance in fire-prone areas. The most important themes treated are related to: i) the analysis of the functions of forest roads in fire prevention and suppression; ii) the importance of forest road planning and building also considering their importance for protecting forests against fires: iii) the construction and maintenance characteristics to be considered for building and maintaining an efficient forest road network against fires; iv) the importance of fire prevention and the related role of forest roads. Special attention has been dedicated to maintenance activities, because a not well-maintained forest road is a not efficient forest road, and it represents a useless economic and environmental cost.

In many activities, chainsaw users are exposed to the risk of injuries and several other hazard factors that may cause health problems. In fact, environmental and working conditions when using chainsaws result in workers&rsquo, exposure to hazards such as noise, vibration, exhaust gases, and wood dust. Repeated or continuous exposure to these unfavourable conditions can lead to occupational diseases that become apparent after a certain period of time has elapsed. Since the use of electric tools is increasing in forestry, the present research aims to evaluate the noise and vibration exposure caused by four models of electric chainsaws (Stihl MSA160T, Stihl MSA200C Li-Ion battery powered and Stihl MSE180C, Stihl MSE220C wired) during cross-cutting. Values measured on the Stihl MSA160T chainsaw (Li-Ion battery) showed similar vibration levels on both right and left handles (0.9&ndash, 1.0 m s&minus, 2, respectively) and so did the other battery-powered chainsaw, the Stihl MSA200C (2.2&ndash, 2.3 m s&minus, 2 for right and left handles, respectively). Results showed a range of noise included between 81 and 90 dB(A) for the analysed chainsaws. In conclusion, the vibrations and noise were lower for the battery chainsaws than the wired ones, but, in general, all the values were lower than those measured in previous studies of endothermic chainsaws.

Originally published in Forests: Picchio R, Venanzi R, Latterini F, Marchi E, Laschi A, Lo Monaco A (2018). Corsican pine (Pinus laricio Poiret) stand management: medium and long lasting effects of thinning on biomass growth. Forests 9 (5), article number 257, p. 1-17 (open access) DOI:10.3390/f9050257 This article can be downloaded at:https://www.mdpi.com/1999-4907/9/5/257 Abstract With the aim of acquiring better comprehension of the ecological and productive aspects of the management of pine forests, we monitored logging damage and evaluated the effects of thinning on stand growth 20 years after the treatment in a Pinus laricio Poiret stand in central Italy. The objectives of the present study were to estimate the injury levels to the remaining trees after thinning; to assess logging damage in the long-term by monitoring residual trees at the end of thinning; to evaluate the effect of damage on the radial growth of trees; to assess the stand dynamics in relation to injury levels and the treatment applied in a twenty-year range; to understand a possible treatment return time; and to evaluate the existence of the “thinning shock”. The results were that 20 years after treatment, the stand dynamics showed a complete recovery; logging damage did not affect the radial growth of P. laricio over time; a second treatment seem to be sustainable starting from the fifteenth year after the previous treatment; and the thinning shock can be clearly evaluated in the first six to seven years after the treatment. Keywords: stand growing; thinning shock; forest logging; tree wounds; tree ring width.

Damage to forest soil caused by vehicle traffic mainly consists of soil compaction, displacement, and rut formation. Severity of the damage depends on vehicle mass, weight of the carried loads, ground morphology, and soil properties, such as moisture. This paper investigates the impacts of two types of vehicles (tracked or wheeled tractor), traffic intensities (one or five skidding cycles) and soil moisture (24% or 13% by weight) on compaction of a loam textured soil in a mixed conifer stand of central Italy. Changes in porosity, bulk density, shear and penetration resistances were analyzed. The latter three parameters were significantly higher in the trafficked soil portions than in the undisturbed ones in all treatments, while the opposite was true for porosity. The impact on soil bulk density and porosity was stronger for the wheeled tractor working on moist soil, while no significant effect of soil moisture was recorded for the tracked tractor. Shear and penetration resistances increased as a consequence of traffic, depending on both tractor type and soil moisture. The largest impact on shear resistance was recorded for the wheeled tractor on moist soil, while significant differences in penetration resistance were observed only between tracked and wheeled tractors in dry soil conditions. In order to preserve soil quality during logging activities, we recommend to operate under dry soil conditions and to limit vehicle movement on existing or new planned trails.

This paper reports the results of the first fire hazard reduction experiment in Italy which integrates thinning and prescribed burning. The study was conducted in Aleppo pine stands in a high fir-risk area in the Calabrian Region. Two stands with a different stem density were selected. The experiment design included: i) prescribed burning followed by selective thinning from below in the stand with lower tree density; ii) selected thinning from below followed by prescribed burning in the stand with higher tree density. Light/moderate thinning intensity treatments were applied at both sites in June-July 2013. Prescribed burning treatments were conducted in May 2013 and March 2014. Data on fuel characteristics were collected before and after treatments. A working time study was also carried out during thinning operations. During burn operations, fireline intensity never exceeded 100 kW/m. Maximum temperature in the organic soil layer was 130°C, and on average temperatures above 60°C lasted less than 4 minutes. The organic soil layer was not consumed, and no damages to adult trees were observed. The results highlight the positive effect of prescribed burning and thinning on the reduction of fuel load and continuity, and then on potential fire behaviour, thus reducing the susceptibility and vulnerability of Aleppo pine stands to summer wildfires. The integrated approach of the study shows how thinning and prescribed burning, the latter a prevention practice surprisingly not very common in a fire-prone environment like Southern Italy, could be a sustainable practice to be included in the ordinary forest management planning.