Search

Wastewater pollution is a pressing environmental issue, necessitating effective remediation strategies to mitigate its impact. This study investigates the use of an efficient catalyst for degrading nitrophenols by converting them into useful aromatic amines, which are crucial building blocks for many pharma industries, and photodegradation of various dyes in their unitary solution as well as in mixture. The Cu-Co-Mn ferrite was synthesized using the sol-gel process and sintered at different temperatures. Structural analysis using XRD and Rietveld refinement revealed a crystal structure corresponding to the Fd 3 ‾ m space group having high purity in all the samples. Additionally, the impact of sintering temperature on the magnetic features of the phases were also studied and the findings suggest that all the phases exhibit ferromagnetic behaviour, which means they can be easily separated from reaction mixtures using an external magnetic field. It was also found that higher sintering temperatures lead to a rise in saturation magnetization and magnetic moment with decrease in coercivity (H c). Further, it was observed that Curie temperature (T c) increases with increase in sintering temperature with the exception of CFM400. The catalytic performance of all the catalysts, including CFM400, CFM500, CFM600, CFM800, and CFM1000, was evaluated and the results indicate that CFM400 exhibits the highest catalytic activity for nitrophenols reduction and photodegradation of dyes, which could be accredited to its larger BET surface area and lower PL intensity. Overall, the structural and magnetic features of the catalyst's sheds light on the underlying mechanisms governing their catalytic activity. These insights offer valuable guidance in the designing and development of effective catalysts for sustainable wastewater treatment practices, emphasizing the importance of considering both structural and magnetic features in catalyst design. [ABSTRACT FROM AUTHOR]

The significant synthetic potential and reactivity of tetracyanoethylene (TCNE) have captured the interest of numerous chemical communities. One of the most promising, readily achievable, yet least explored pathways for the reactivity of TCNE involves its interaction with arylamines. Typically, the reaction proceeds via tricyanovinylation (TCV); however, deviations from the standard chemical process have been observed in some instances. These include the formation of heterocyclic structures through tricyanovinyl intermediates, aliphatic dicarbonitriles through the cleavage of the C–C bond of a tetracyanoethyl substituent, complexation, and various pericyclic reactions. Therefore, the objective of this study is to review the diverse modes of interaction of TCNE with aromatic nitrogen-containing compounds and to focus the attention of the chemical community on the synthetic capabilities of this reagent, as well as the various biological and optical activities of the structures synthesized based on TCNE. [ABSTRACT FROM AUTHOR]

Phenylhydroxylamine and its derivates (PHAs) are important chemical intermediates. Phenylhydroxylamines are mainly produced via the catalytic reduction of aromatic nitro compounds. However, this catalytic reduction method prefers to generate thermodynamically stable aromatic amine. Thus, designing suitable catalytic systems, especially catalysts to selectively convert aromatic nitro compounds to PHAs, has received increasing attention but remains challenging. In this review, we initially provide a brief overview of the various strategies employed for the synthesis of PHAs, focusing on reducing aromatic nitro compounds. Subsequently, an in-depth analysis is presented on the catalytic reduction process, encompassing discussions on catalysts, reductants, hydrogen sources, and a comprehensive assessment of the merits and drawbacks of various catalytic systems. Furthermore, a concise overview is provided regarding the progress made in comprehending the mechanisms involved in this process of catalytic reduction of aromatic nitro compounds. Finally, the main challenges and prospects in PHAs' production via catalytic reduction are outlined. [ABSTRACT FROM AUTHOR]

In response to the challenge of antibiotic-resistant microorganisms, oxazolone analogs are frequently used for bacterial, antiviral, and anti-inflammatory treatments. However, few studies have shown bis-oxazolone analogs possess antibacterial activities. In this study, we modified bis-oxazolone molecules with various aromatic amines to create new bis-benzamide and bis-imidazolone derivatives. These derivatives were analyzed using FTIR, 1H-NMR, and 1,3C-NMR spectroscopy. Molecular docking revealed favorable interactions with DNA gyrase, with compounds 3, 4a, and 5e showing higher binding affinities than penicillin G and ampicillin. These findings suggest their potential as future antimicrobial agents. The tested compounds demonstrated efficacy against bacterial strains, particularly E. coli and S. aureus, with significant activity observed in compounds 4a, 4e, 5d, and 5e. Antioxidant activity, assessed using the DPPH method, showed bis-compounds with excellent results comparable to ascorbic acid. This encourages further studies to explore their potential. Overall, the synthesized bis-oxazolone derivatives demonstrated increased medicinal activity and high potential as future antimicrobial and antioxidant agents. [ABSTRACT FROM AUTHOR]

We report the reticular synthesis and structural investigations through the spectroscopic analysis of a novel polyhedral oligomeric silsesquioxane (POSS)-modified framework, hereby ascribed as a catalyst for the selective reduction of aryl nitriles to amines. The integration of the unique features of the polyhedral oligomeric silsesquioxane with 2,2′-Bipyridine-4,4′-dicarboxaldehyde and subsequently coordination to cobalt acetate manifests a distinctive feature, which is a stable covalent bond between Co and the functionalized POSS, effectively preventing catalyst leaching. The cobalt acetate-modified POSS–COF, synthesized with this approach, underwent a comprehensive characterization employing various analytical techniques including FTIR, XRD, SEM, XPS, TGA, and 29Si NMR. This thorough characterization provides a detailed insight into the structural and chemical attributes of the catalyst. Our catalyst, with its exceptional catalytic efficiency in catalyzing reduction reactions compared to its homogeneous counterparts, and its distinctive three-dimensional metalated POSS system, shows outstanding catalytic performance attributed to its diverse coordination interactions with ligands. Moreover, this catalyst presents additional merits, such as facile recovery and recyclability, making it a promising candidate for sustainable and efficient catalytic processes and thus instilling hope for a greener future. [ABSTRACT FROM AUTHOR]

In the present work, inexpensive and commercially available diethyltriamine pentaacetic acid (DTPA) was used as an initiator to catalyze the N-formylation reaction of CO2 with amines via the construction of C-N bonds in the presence of xanthone as the photosensitizer and PhSiH3 as the reducing agent. After a systematic study of various factors, the optimal conditions for the photocatalytic reaction were obtained: 2.5 mmol of amine, 2.5 mmol of PhSiH3, 10 mol% of DTPA, 20 mol% of xanthone, 1 mL of dimethylsulfoxide (DMSO), atmospheric pressure, and 35 W UV lamp irradiation for 48 h. Under the optimal conditions, the catalyst system afforded high performance for the N-formylation of amines (primary and secondary amines) and CO2, and the yields of the N-formylated products of dialkylamines were above 70%. Further studies exhibit that the catalytic system has a wide scope of substrate applications. For various alicyclic secondary amines, heterocyclic secondary amines, aliphatic primary amines, and aromatic primary amines, the corresponding N-formylation products can be obtained efficiently. In addition, the catalyst can be recycled by simple precipitation and filtration. After five cycles of recycling, there was no significant change in the catalytic and structural properties of DTPA. Finally, a possible reaction mechanism is proposed. [ABSTRACT FROM AUTHOR]

In this research, the preparation of lipoamide through direct amidation of fatty acid and via amidation of fatty acid methyl ester (FAME) was compared. The reactivity of aromatic amines and cyclohexylamine for the synthesis of lipoamide was investigated in this research. The performance of saturated and unsaturated fatty acids was also compared. The synthesis of lipoamides via direct amidation was conducted under reflux using a Dean-Stark trap and silica gel as the catalyst. On the other hand, the amidation of FAME was carried out without catalysts and solvent. Both reactions were run simultaneously for 18 hours at the same temperature. The reaction was monitored using TLC, and then the product was purified using column chromatography and characterized using FTIR and 1H NMR. The TLC data, FTIR, and 1H NMR spectra confirmed that both reaction pathways produced the same lipoamide as the product. Both reaction pathways were compatible with aromatic and nonaromatic amines and saturated and unsaturated fatty acids. The reaction yield of lipoamide from direct amidation was around 70-80% and two-fold higher than lipoamide synthesis via amidation of FAME. Therefore, direct amidation of fatty acid was preferred for the synthesis of lipoamides compared to via amidation of FAME.

Thiocyanates form an important class of organic compounds commonly found in natural products that exhibit excellent antimicrobial activity. The electrophilic thiocyanation is one of the most effective methods of introducing a -SCN functional group to the parent organic molecule. In this work, we explored an eco-friendly and highly efficient method for thiocyanation of anilines and 1-(substituted benzylidene)-2-phenylhydrazines using commercially available N-bromoscuccinimide (NBS) and potassium thiocyanate (KSCN). The optimized protocol afforded thiocyanates with good regioselectivity and excellent yields in comparison to the available methods.

Intercalation chemistry is pivotal in discovering the dimension-dependent properties of 2D materials and expanding their applications. Layered bismuth oxide with composition Bi 0.775 Ln 0.225 O 1.5 (Ln = La, Pr, Nd, Sm, and Eu) has been demonstrated to intercalate both aliphatic and aromatic amines, resulting in the unit cell expansion along the c -axis. Aliphatic amines were present in a vertical orientation, whereas aromatic amines preferred a horizontal orientation. The intercalated amine concentrations ranged from 0.15 to 0.54 mole per mole of the host. Among the chosen amines, ethylenediamine intercalation enhanced the c -axis of Bi 0.775 Pr 0.225 O 1.5 by 20 Å, justified by the high amounts of intercalant and intermolecular hydrogen bonding between them, resulting in a bilayer arrangement. The lamellar-plate-like morphology filled with intercalants and twinning collapse was noticed in the FESEM and SAED patterns after the intercalation process. The ethylenediamine intercalated Bi 0.775 Pr 0.225 O 1.5 was further evaluated for iodine adsorption from non-aqueous solutions through chemisorption following pseudo-second-order kinetics. The X-ray diffraction peaks after adsorption suggested bilayer to monolayer transformation aided by chemical alterations within the host's van der Waals gaps. The N–I vibration mode, observed in the FTIR spectrum of the iodine-adsorbed sample, further augmented the interaction between the two during adsorption. [ABSTRACT FROM AUTHOR]

Photoelectrochemical (PEC) cell is an ideal platform for organic transformation because of its green benefits and minimal energy consumption. As an emerging methodology, the reaction types of photoelectrocatalytic organic synthesis (PECOS) are limited to simple oxidation and C–H activation at current stage. Metal catalysis for the construction of C(sp2)–N bonds has not been touched yet in PECOS. We introduce here a PEC method that successfully engages Ni catalysis for the mild production of aniline derivatives. Experimental and computational investigations elucidate that the addition of photoanode-generated amine radical to Ni catalyst avoids the sluggish nucleophilic attack, enabling the reaction to proceed at an ultra-low potential (–0.4 V vs. Ag/AgNO3) and preventing the overoxidation of products in conventional electrochemical synthesis. This synergistic catalysis strategy exhibits good functional group tolerance and wide substrate scope on both aryl halides and amines, by which some important natural products and pharmaceutical chemicals have been successfully modified. The reaction types of photoelectrocatalytic organic synthesis (PECOS) are limited to simple oxidation and C–H activation at current stage while metal catalysis for the construction of C(sp2)–N bonds remains unexplored. Here, the authors introduce a PEC method that successfully engages Ni catalysis for the mild production of aniline derivatives. [ABSTRACT FROM AUTHOR]

Palladium catalyzed tandem reaction represents a one-pot synthetic approach to efficiently synthesize complex functionalized molecules while reducing synthetic steps, aligning with the principles of green chemistry. However, achieving a direct cascade of the aza-Wacker and Povarov reactions in one-pot synthesis presents a challenge due to substrate compatibility issues between the two reactions. In this work, we describe an aza-Wacker/Povarov reaction employing a highly electrophilic palladium catalyst, which effectively converts anilines and 1,6-dienes into hexahydro-cyclopenta[b]quinolines. The optimized conditions yield up to 79%, with a diastereoselectivity > 20:1. Substrate range testing reveals compatibility with various sensitive functional groups, and successful late-stage modifications are performed on several natural products and drug molecules, demonstrating the versatility and practicality of the method. Additionally, a preliminary investigation into the reaction mechanism suggests an aza-Wacker process followed by a Povarov process. Achieving a direct cascade of the aza-Wacker and Povarov reactions in one-pot synthesis presents a challenge due to substrate compatibility issues between the two reactions. Here, the authors report an aza-Wacker/Povarov reaction of anilines with 1,6-dienes to obtain the hexahydro-cyclopenta[b]quinolines. [ABSTRACT FROM AUTHOR]

The reduction of CO2 is an important method to produce chemicals such as methanol, formic acid, formaldehyde, etc. In general, the reduction of CO2 is carried out at high temperatures and pressures with precious metals as catalysts, which is not favorable for industrial procedures. Thus, it will be very useful if researchers can find cost-effective catalysts for industrial application in CO2 reduction. In this work, commercially available ethylenediaminetetraacetic acid (EDTA) was tested as a cheap, non-toxic, and recyclable catalyst to initiate the N-carbonylation reaction of CO2 with amines. After screening various reaction parameters, including temperature, pressure, time, solvent, and reducing agent, the optimal reaction conditions were obtained: 80 °C, 2 MPa, 6 h, 50 mmol% catalyst dosage, 1 mL DMSO, and 1:1 molar ratio of amine to reducing agent. Notably, further studies confirmed that EDTA could also be effective for N-formylation even under ambient conditions (0.1 MPa and room temperature). The suitability of the catalyst for 26 kinds of substrates (including aliphatic amines, aromatic amines, and alicyclic amines) and its reusability were also investigated, with satisfactory results. Scale-up research has been performed effectively with a high conversion of amine (83%) to obtain the mono-formylated product selectively. Finally, the mechanism of the reaction between amine and CO2 has been proposed via control experiments and compared with results in the literature. [ABSTRACT FROM AUTHOR]

Candida albicans is one of the most dangerous pathogenic fungi in the world, according to the classification of the World Health Organization, due to the continued development of its resistance to currently available anticandidal agents. To overcome this problem, the current work provided a simple, one-step, cost-effective, and safe technique for the biosynthesis of new functionalized anticandidal selenium nanoparticles (Se NPs) against C. albicans ATCC10231 using the cell-free supernatant of Limosilactobacillus fermentum (OR553490) strain. The bacterial strain was isolated from yogurt samples available in supermarkets, in Damietta, Egypt. The mixing ratio of 1:9 v/v% between cell-free bacterial metabolites and sodium selenite (5 mM) for 72 h at 37 °C were the optimum conditions for Se NPs biosynthesis. Ultraviolet–visible spectroscopy (UV–Vis), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray diffraction (XRD), Zeta analyses, and elemental analysis system (EDS) were used to evaluate the optimized Se NPs. The Se NPs absorption peak appeared at 254 nm. Physicochemical analysis of Se NPs revealed the crystalline-shaped and well-dispersed formation of NPs with an average particle size of 17–30 nm. Se NPs have − 11.8 mV, as seen by the zeta potential graph. FT-IR spectrum displayed bands of symmetric and asymmetric amines at 3279.36 cm−1 and 2928.38 cm−1, aromatic and aliphatic (C–N) at 1393.32 cm−1 and 1237.11.37 cm−1 confirming the presence of proteins as stabilizing and capping agents. Se NPs acted as a superior inhibitor of C. albicans with an inhibition zone of 26 ± 0.03 mm and MIC value of 15 µg/mL compared to one of the traditional anticandidal agent, miconazole, which revealed 18 ± 0.14 mm and 75 µg/mL. The cytotoxicity test shows that Se NPs have a low toxic effect on the normal keratinocyte (IC50 ≈ 41.5 μg/mL). The results indicate that this green synthesis of Se NPs may have a promising potential to provide a new strategy for drug therapy. [ABSTRACT FROM AUTHOR]

One hundred and twenty samples of meat products represented by grilled kofta, grilled meat, charcoal grilled kofta, and charcoal grilled meat (30 pieces each) were randomly collected from different markets in Kalyobia Governorate, Egypt. Each sample was individually packed in a plastic bag and taken directly to the laboratory. Collected samples were analyzed for heterocyclic aromatic hydrocarbons (HAAs). This study aimed to reduce the amount of carbonization and fat pyrolysis by reducing the amount of meat droplets using antioxidants such as butylhydroxytoluene (0.02%) and carvacrol (1%). The observed findings showed that the average levels of HAAs (pg/kg) in charcoal-grilled meat samples, left untreated (n = 30), were as follows: BhIP, MelQx, 4,8-DiMelQx and Norharman were Norharman while IQ was beyond the undetected limit (UDL). Meanwhile, the treated samples with (BHT 0.0% and carvacrol 1%) showed that individuals; BhIP, MelQx, 4,8-DiMelQx, and Norharman were 3.8±0.3, 0.5±0.1, 1.2±0.1 and 1.8±0.1 with reduction percentage 41.5%, 28.6%, 36.8% and 47.1%, respectively for BHT concentration 0.02%. While for carvacrol concentration 1% individuals; BhIP, MelQx, 4,8-DiMelQx, and Norharman were 3.1±0.2, 0.4±0.2, 1.0±0.1 and 1.5±0.1 with reduction percentages 52.3%, 42.9%, 47.4%, and 55.9%, respectively. In conclusion, this study recommends the treatment of charcoal grilled meat with antioxidants, such as BHT 0.0% and carvacrol 1%, to reduce HAAS concentrations in the examined samples. [ABSTRACT FROM AUTHOR]

The development of the textile industry has negative effects on the natural environment. Cotton cultivation, dyeing fabrics, washing, and finishing require a lot of water and energy and use many chemicals. One of the most dangerous pollutants generated by the textile industry is dyes. Most of them are characterized by a complex chemical structure and an unfavorable impact on the environment. Especially azo dyes, whose decomposition by bacteria may lead to the formation of carcinogenic aromatic amines and raise a lot of concern. Using the metabolic potential of microorganisms that biodegrade dyes seems to be a promising solution for their elimination from contaminated environments. The development of omics sciences such as genomics, transcriptomics, proteomics, and metabolomics has allowed for a comprehensive approach to the processes occurring in cells. Especially multi-omics, which combines data from different biomolecular levels, providing an integrative understanding of the whole biodegradation process. Thanks to this, it is possible to elucidate the molecular basis of the mechanisms of dye biodegradation and to develop effective methods of bioremediation of dye-contaminated environments. [ABSTRACT FROM AUTHOR]

Assembling graphene sheets into macroscopic fibers with graphitic layers uniaxially aligned along the fiber axis is of both fundamental and technological importance. However, the optimal performance of graphene-based fibers has been far lower than what is expected based on the properties of individual graphene. Here we show that both mechanical properties and electrical conductivity of graphene-based fibers can be significantly improved if bridges are created between graphene edges through covalent conjugating aromatic amide bonds. The improved electrical conductivity is likely due to extended electron conjugation over the aromatic amide bridged graphene sheets. The larger sheets also result in improved π-π stacking, which, along with the robust aromatic amide linkage, provides high mechanical strength. In our experiments, graphene edges were bridged using the established wet-spinning technique in the presence of an aromatic amine linker, which selectively reacts to carboxyl groups at the graphene edge sites. This technique is already industrial and can be easily upscaled. Our methodology thus paves the way to the fabrication of high-performance macroscopic graphene fibers under optimal techno-economic and ecological conditions. The performance of macroscopic graphene fibers is hampered by lower bonding strength between individual graphene sheets. Authors mitigate this by creating covalent conjugating linkages at sheet edges, improving mechanical and electrical properties. [ABSTRACT FROM AUTHOR]

Thiocyanates form an important class of organic compounds commonly found in natural products that exhibit excellent antimicrobial activity. The electrophilic thiocyanation is one of the most effective methods of introducing a -SCN functional group to the parent organic molecule. In this work, we explored an eco-friendly and highly efficient method for thiocyanation of anilines and 1-(substituted benzylidene)-2-phenylhydrazines using commercially available N-bromoscuccinimide (NBS) and potassium thiocyanate (KSCN). The optimized protocol afforded thiocyanates with good regioselectivity and excellent yields in comparison to the available methods. [ABSTRACT FROM AUTHOR]

[Display omitted] • The WO 3 decorated with Cu was developed to efficiently regulate O 2 active species. • Under irradiation of wavelength < 475 nm, O 2 tends to produce 1O 2 and •O. • Under irradiation with a long wavelength source (>475 nm), 1O 2 is mainly ROS. • Cu@CuO x /WO 3 with photo-regulated ROS generation exhibits excellent performance. Photocatalysts can absorb light and activate molecular O 2 under mild conditions, but the generation of unsuitable reactive oxygen species often limits their use in synthesizing fine chemicals. To address this issue, we disperse 1 wt% copper on tungsten trioxide (WO 3) support to create an efficient catalyst for selective oxidative coupling of aromatic amines to imines under sunlight irradiation at room temperature. Copper consists of a metallic copper core and an oxide shell. Experimental and density functional theory calculations have confirmed that Cu 2 O is the primary activation site. Under λ < 475 nm, the light excites electrons of the valence bands in Cu 2 O and WO 3 , which activate O 2 to superoxide radical •O 2 −. Then rapidly transforms into oxygen adatoms (•O) and oxygen anion radicals (•O−) species on the surface of Cu 2 O. Simultaneously, it is captured by holes in the WO 3 valence band to generate singlet oxygen (1O 2). •O bind to 1O 2 promoting the coupling reaction of amines. When λ > 475 nm, intense light absorption due to the localized surface plasmon resonance excites numerous electrons in Cu to promote the oxidative coupling with the adsorbed O 2. This study presents a promising approach towards the design of high-performance photocatalysts for solar energy conversion and environmentally-friendly oxidative organic synthesis. [ABSTRACT FROM AUTHOR]

The purpose of the present research was to study the impact of bitter melon extract (BME) on the generation of heterocyclic aromatic amines (HAAs) in chicken thigh meat. Raw chicken samples were marinated overnight with various levels (0%, 0.5%, and 1%) of BME, and pan‐fried at 150, 200, and 250°C for a total of 10 min. IQx, IQ, MeIQx, MeIQ, 7,8‐DiMeIQx, 4,8‐DiMeIQx, PhIP, AαC, and MeAαC were detected in quantities that varied according to the cooking temperature and the concentration of BME. Notably, IQx, MeIQx, MeIQ, 7,8‐DiMeIQx, 4,8‐DiMeIQx, and AαC levels were reduced through the application of the marinade. Cooking at higher temperatures led to elevated levels of total HAAs. Total HAA levels were 0.98 ± 1.12 ng/g, 3.82 ± 2.12 ng/g, and 6.25 ± 3.35 ng/g in samples cooked at 150, 200, and 250°C, respectively (p <.01). BME demonstrated its effectiveness in mitigating total HAA levels, showing reductions ranging from 25.9% to 69.9%. The most effective concentration of BME in reducing total HAAs was 1% for all cooking temperatures, which might be attributed to its antioxidant activity. These results carry substantial implications for potentially incorporating natural extracts such as BME into chicken products as a viable strategy to reduce HAAs, thus enhancing the safety and quality of meat products. [ABSTRACT FROM AUTHOR]

We report a one-step synthesis of trifluoromethyl-substituted di(pyridin-2-yl)amine-based ligands. N-(hetero)aryl-substituted bis(5-(trifluoromethyl)pyridin-2-yl)amines were obtained from 2-bromo-5-(trifluoromethyl)pyridine and corresponding aromatic amines via Pd-catalyzed amination reaction in the presence of a Pd(dba)2/BINAP catalytic system. Four new ligands were prepared in good to high yields and characterized by NMR, IR spectroscopies and mass spectrometry. The structure of one of the products was additionally supported by X-ray analysis. [ABSTRACT FROM AUTHOR]

This paper presents the photophysical investigations of two organic compounds synthesised directly by the aminolysis depolymerisation of the waste poly(ethylene terephthalate) (rPET) with aromatic amines, i.e., aniline and 3-amino-N-hexyl-1,8-naphthalimide without use of a catalyst. The chemical structure was confirmed by 1H-NMR and 13C-NMR, as well as FT-IR. The thermal, electrochemical and optical studies of the obtained derivatives were performed. The presented compounds were thermally stable up to 360 °C, and the glass transition temperature (Tg) occurred for the compound with the 1,8-naphthalimide units. The electrochemical investigations of the synthesised compounds have revealed one oxidation process and two reduction processes for the compound with the 1,8-naphthalimide fragments. The tested derivatives were characterised by a low-lying highest occupied molecular orbital (HOMO) level (below –6.09 eV) and an energy-band gap (Eg) below 3.10 eV. The obtained molecules were absorbed in the range of 204 nm - 445 nm and emitted light from a purple to a green spectral region deepened on the used solvent with low quantum yields. The blends with poly(3-hexylthiophene-2,5-diyl) (P3HT), which is used as a donor in the bulk heterojunction solar cells (BHJ), and amide derivative with 1,8-naphthalimide fragments were made, and the emission quenching of poly(3-hexylthiophene-2,5-diyl) (P3HT) was recorded. The presented results of the photophysical investigations have opened new possibilities for obtaining functional materials from recycled poly(ethylene terephthalate) (rPET). [ABSTRACT FROM AUTHOR]

BackgroundAromatic amines (AAs) are a group of compounds widely found in chemical industry, tobacco smoke, and during food processing, with established carcinogenic properties. To date, there have been no reports on the potential neurotoxic effects of adult exposure to AAs. Serum neurofilament light chain (sNfL) is a protein released into the bloodstream following nerve axon injury and has been validated as a reliable biomarker for various neurological diseases. However, there has been no research to investigate the relationship between AAs exposure and sNfL.MethodsIn this study, we selected adults (aged ≥20 years) with data on both AAs and sNfL from the National Health and Nutrition Examination Survey (NHANES) conducted in 2013–2014. We used multivariable linear regression models to explore the correlation between urinary AAs and sNfL.ResultsIn total, 510 adult participants with an average age of 43.58 ± 14.74 years were included in the study. Our findings indicate that, based on univariate linear regression and between-group comparative analyses, 1-Aminonaphthalene (1-AN), 2-Aminonaphthalene (2-AN), 4-Aminobiphenyl (4-AN) and o-Anisidine (o-ANI) showed a positive correlation with serum neurofilament light chain (P < 0.05). However, multiple linear regression analysis revealed that only 2-AN exhibited a positive correlation with serum neurofilament light chain (P < 0.05), while the correlations of other compounds with serum neurofilament light chain became non-significant.ConclusionAlthough our cross-sectional study fails to establish causal relationships or determine clinical significance, the findings indicate a potential association between adult exposure to AAs, notably 2-AN, and nerve damage. Consequently, further research is needed to explore the connection between AAs exposure, sNfL, and neurological conditions in adults.

Arylamines, serving as crucial building blocks in natural products and finding applications in multifunctional materials, are synthesized on a large scale via an electrophilic nitration/reduction sequence. However, the current methods for aromatic C–H amination have not yet attained the same level of versatility as electrophilic nitration. Here we show an extensively investigated transition metal-free and regioselective strategy for the amination of nitrobenzenes, enabling the synthesis of 4-nitro-N-arylamines through C(sp2)-H/N-H cross-coupling between electron-deficient nitroarenes and amines. Mechanistic studies have elucidated that the crucial aspects of these reactions encompass the generation of nitrogen radicals and recombination of nitrobenzene complex radicals. The C(sp2)-N bond formation is demonstrated to be highly effective for primary and secondary arylamines as well as aliphatic amines under mild conditions, exhibiting exceptional tolerance towards diverse functional groups in both nitroarenes and amines (>100 examples with yields up to 96%). Notably, this C(sp2)-H/N-H cross-coupling exhibits exclusive para-selectivity. Direct radical C–H amination strategies have exhibited innovation, but challenges remain with C–H amination of electron-poor nitroarenes due to the essence of the electron-deficient nitrogen radical. Herein, the authors report a transition metal-free dehydrogenative C(sp2)-H/N-H cross-coupling between electron-poor nitroarenes and amines. [ABSTRACT FROM AUTHOR]

Modification of membranes is widely used for altering their separation properties. In this study, the modification of PVDF nanofiber mat by deposition of polyamide layers was evaluated to improve dye recovery by means of forward osmosis process. The polyamide active layer was prepared by a reaction of cyclic aromatic amines, m-phenylenediamine, or piperazine, and trimesoylchloride. The modification progress was monitored by FTIR analysis, water uptake, nitrogen content, and grafting yields. Investigated membranes showed an excellent dye separation features with water flux and dye fluxes strongly related to type of applied amines and reaction time. The best obtained membrane demonstrated outstanding performance in forward osmosis; their water flux was 3.3 LMH and rejection rate of 97% for bromocresol green dye. The membrane allowed increase dye concentration by 50% after 24 h of the process. [ABSTRACT FROM AUTHOR]

Simple Summary: Pigments in insects have attracted the interest of scientists since the end of the 19th century. Most yellow, orange or red pigments belong to a family of pteridines which, in addition to their color, are fluorescent under UV light. The fluorescence of colorless intermediates in the pathway can help interspecific recognition. This review discusses, and integrates into one metabolic pathway, the different branches which lead to the synthesis of the pigments commonly found in the wings of butterflies and eyes and bodies of insects. Despite their function as pigments, some pteridine derivatives are important enzyme cofactors in all living organisms. Pteridines are important cofactors for many biological functions of all living organisms, and they were first discovered as pigments of insects, mainly in butterfly wings and the eye and body colors of insects. Most of the information on their structures and biosynthesis has been obtained from studies with the model insects Drosophila melanogaster and the silkworm Bombyx mori. This review discusses, and integrates into one metabolic pathway, the different branches which lead to the synthesis of the red pigments "drosopterins", the yellow pigments sepiapterin and sepialumazine, the orange pigment erythropterin and its related yellow metabolites (xanthopterin and 7-methyl-xanthopterin), the colorless compounds with violet fluorescence (isoxanthopterin and isoxantholumazine), and the branch leading to tetrahydrobiopterin, the essential cofactor for the synthesis of aromatic amino acids and biogenic amines. [ABSTRACT FROM AUTHOR]

Two blue-emitting materials, 4-(12-([1,1′:3′,1″-terphenyl]-5′-yl)chrysen-6-yl)-N,N-diphenylaniline (TPA-C-TP) and 6-([1,1′:3′,1″-terphenyl]-5′-yl)-12-(4-(1,2,2-triphenylvinyl)phenyl)chrysene (TPE-C-TP), were prepared with the composition of a chrysene core moiety and terphenyl (TP), triphenyl amine (TPA), and tetraphenylethylene (TPE) moieties as side groups. The maximum photoluminescence (PL) emission wavelengths of TPA-C-TP and TPE-C-TP were 435 and 369 nm in the solution state and 444 and 471 nm in the film state. TPA-C-TP effectively prevented intermolecular packing through the introduction of TPA, a bulky aromatic amine group, and it showed an excellent photoluminescence quantum yield (PLQY) of 86% in the film state. TPE-C-TP exhibited aggregation-induced emission; the PLQY increased dramatically from 0.1% to 78% from the solution state to the film state. The two synthesized materials had excellent thermal stability, with a high decomposition temperature exceeding 460 °C. The two compounds were used as emitting layers in a non-doped device. The TPA-C-TP device achieved excellent electroluminescence (EL) performance, with Commission Internationale de L′Eclairage co-ordinates of (0.15, 0.07) and an external quantum efficiency of 4.13%, corresponding to an EL peak wavelength of 439 nm. [ABSTRACT FROM AUTHOR]

The accurate prediction of adverse drug reactions (ADRs) is essential for comprehensive drug safety evaluation. Pre-trained deep chemical language models have emerged as powerful tools capable of automatically learning molecular structural features from large-scale datasets, showing promising capabilities for the downstream prediction of molecular properties. However, the performance of pre-trained chemical language models in predicting ADRs, especially idiosyncratic ADRs induced by marketed drugs, remains largely unexplored. In this study, we propose MoLFormer-XL, a pre-trained model for encoding molecular features from canonical SMILES, in conjunction with a CNN-based model to predict drug-induced QT interval prolongation (DIQT), drug-induced teratogenicity (DIT), and drug-induced rhabdomyolysis (DIR). Our results demonstrate that the proposed model outperforms conventional models applied in previous studies for predicting DIQT, DIT, and DIR. Notably, an analysis of the learned linear attention maps highlights amines, alcohol, ethers, and aromatic halogen compounds as strongly associated with the three types of ADRs. These findings hold promise for enhancing drug discovery pipelines and reducing the drug attrition rate due to safety concerns. [ABSTRACT FROM AUTHOR]

This work seeks to evaluate the antibacterial properties of the compounds and create imine-linked benzothiazine derivatives using a novel, eco-friendly ultrasonic technique. Escherichia coli and Staphylococcus aureus were utilized to assess the synthetic compounds, SBIa-e, for their antibacterial activity. All compounds were soluble in organic solvents but insoluble in water, with yields ranging from 68 to 77%. The molecules showed stretching vibrations corresponding to various functional groups. The presence of amine hydrogen (2.0, 7.0 ppm), aliphatic protons (2.6-4.3 ppm), imine hydrogen (8.0-8.5 ppm), and protons of the aromatic ring (6.8-7.9 ppm) was indicated by the 1HNMR spectra. Both the bacterial strains were all susceptible to the antibacterial action of the compounds, which showed dose-dependent effects. When the compounds were compared to gram-positive bacteria, it was discovered that the former had greater effectiveness than the latter. SBId had the lowest IC50 against Staphylococcus aureus (70.16 µg/mL) and Escherichia coli (49.19 µg/mL) among the drugs whose IC50 values were calculated. [ABSTRACT FROM AUTHOR]

Modern science and technology demand a low glass transition temperature, yet one tailored to specific thermoset needs and specific to individual hardener applications. Two novel, nonterminal liquid crystalline epoxy resins (LCER) were synthesised, with their structures characterized via nuclear magnetic resonance (NMR), mass spectrometry (MS), and elemental analysis. Their liquid crystalline nature and thermal properties were determined using polarized optical microscopy (POM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). A set of seven aromatic amines serving as curing agents was used to perform curing in fourteen different systems in order to assess the glass transition temperature (Tg) of the obtained polymer networks using DSC. The liquid crystalline elastomers were obtained with vitrification occurring in a low temperature range (−10–40 °C), with a more predictable outcome for amines with two aromatic rings in the structure than with one. Moreover, the resin with a core consisting of four aromatic rings produces networks with higher Tg than the three-aromatic resin. The use of nonterminal LCER allowed the lowering of the glass transition temperature of the polymers to more than 70 °C compared to a terminal analogue. This brings new possibilities of designing highly elastic yet cured polymers with potential for use in smart applications due to the LC nature of the resin. [ABSTRACT FROM AUTHOR]

This study investigates the biodegradation of Reactive Red 141 (RR 141), an azo dye prevalent in the textile industry, by bacteria isolated from activated sludge in a textile effluent treatment plant. RR 141, characterized by nitrogen–nitrogen double bonds (-N=N-), contributes to environmental issues when improperly disposed of in textile effluents, leading to reduced oxygen levels in water bodies, diminished sunlight penetration, and the formation of potentially carcinogenic and mutagenic aromatic amines. This research focuses on identifying bacteria from activated sludge with the potential to decolorize RR 141. Microbiological identification employs MALDI-TOF-MS, known for its precision and rapid identification of environmental bacteria, enhancing treatment efficiency. Results highlight Bacillus thuringiensis and Kosakonia radicincitans as the most promising strains for RR 141 decolorization. Analysis of micro-organisms in activated sludge and database exploration suggests a correlation between these strains and the decolorization process. It is worth noting that this is the first report on the potential use of K. radicincitans for azo dye decolorization. Three distinct culture media—BHI, MSG, and MS—were assessed to investigate their impact on RR 141 decolorization. Notably, BHI and MSG media, incorporating a carbon source, facilitated the bacterial growth of both tested species (B. thuringiensis and K. radicincitans), a phenomenon absent in the MS medium. This observation suggests that the bacteria exhibit limited capability to utilize RR 141 dye as a carbon source, pointing towards the influence of the culture medium on the discoloration process. The study evaluates performance kinetics, decolorization capacity through UV-VIS spectrophotometry, potential degradation pathways via HPLC-MS analysis, phytotoxicity, and enzymatic activity identification. B. thuringiensis and K. radicincitans exhibit potential in decolorizing RR141, with 38% and 26% removal individually in 120 h. As a consortium, they achieved 36% removal in 12 h, primarily through biosorption rather than biodegradation, as indicated by HPLC-MS analyses. In conclusion, the research emphasizes the importance of exploring bacteria from activated sludge to optimize azo dye degradation in textile effluents. B. thuringiensis and K. radicincitans emerge as promising candidates for bioremediation, and the application of MALDI-TOF-MS proves invaluable for rapid and precise bacteria identification. [ABSTRACT FROM AUTHOR]

Beta-aminocarbonyl compounds are important intermediates produced from Mannich condensation. In this research, benzaldehyde, para-hydroxy acetophenone or para-nitro acetophenone were reacted with a various of primary aromatic amines to give compounds (1-7) and (8-14), respectively. The chemical formulas of the synthesized compounds were confirmed by conducting some physical and spectroscopic measurements, such as, melting points, IR and H1-NMR spectrum. After testing the biological activity of some of the synthesized compounds (8,10,11,13) using Gram-positive (Streptococcus, and Staphylococcus aureus), Gram-negative (Klebsiella spp., and Escherichia coli) bacteria, as well as yeast strains, were chosen for this investigation (candidan albicans). Isolated bacteria were identified using standard methods of isolation and identification, including direct assays and culture on various media. Some theoretical tests have also been carried out such as SwissADME and cardioToxCSM prediction on all prepared compounds to predict their activity in terms of pharmacokinetic properties (ADME) and also predict their cardiotoxicity on some heart functions such as arrhythmia, cardiac failure, heart block, hERG toxicity, Hypertension (HT), and Myocardial Infarction (MI). [ABSTRACT FROM AUTHOR]

BackgroundMelamine, melamine derivatives, and aromatic amines are nitrogen-containing compounds with known toxicity and widespread commercial uses. Nevertheless, biomonitoring of these chemicals is lacking, particularly during pregnancy, a period of increased susceptibility to adverse health effects.ObjectivesWe aimed to measure melamine, melamine derivatives, and aromatic amine exposure in pregnant women across the United States (U.S.) and evaluate associations with participant and urine sample collection characteristics.MethodsWe measured 43 analytes, representing 45 chemicals (i.e., melamine, three melamine derivatives, and 41 aromatic amines), in urine from pregnant women in nine diverse ECHO cohorts during 2008-2020 (N = 171). To assess relations with participant and urine sample collection characteristics, we used generalized estimating equations to estimate prevalence ratios (PRs) for analytes dichotomized at the detection limit, % differences (%Δ) for continuous analytes, and 95% confidence intervals. Multivariable models included age, race/ethnicity, marital status, urinary cotinine, and year of sample collection.ResultsTwelve chemicals were detected in >60% of samples, with near ubiquitous detection of cyanuric acid, melamine, aniline, 4,4'-methylenedianiline, and a composite of o-toluidine and m-toluidine (99-100%). In multivariable adjusted models, most chemicals were associated with higher exposures among Hispanic and non-Hispanic Black participants. For example, concentrations of 3,4-dichloroaniline were higher among Hispanic (%Δ: +149, 95% CI: +17, +431) and non-Hispanic Black (%Δ: +136, 95% CI: +35, +311) women compared with non-Hispanic White women. We observed similar results for ammelide, o-/m-toluidine, 4,4'-methylenedianiline, and 4-chloroaniline. Most chemicals were positively associated with urinary cotinine, with strongest associations observed for o-/m-toluidine (%Δ: +23; 95% CI: +16, +31) and 3,4-dichloroaniline (%Δ: +25; 95% CI: +17, +33). Some chemicals exhibited annual trends (e.g., %Δ in melamine per year: -11; 95% CI: -19, -1) or time of day, seasonal, and geographic variability.DiscussionExposure to melamine, cyanuric acid, and some aromatic amines was ubiquitous in this first investigation of these analytes in pregnant women. Future research should expand biomonitoring, identify sources of exposure disparities by race/ethnicity, and evaluate potential adverse health effects.

The significant synthetic potential and reactivity of tetracyanoethylene (TCNE) have captured the interest of numerous chemical communities. One of the most promising, readily achievable, yet least explored pathways for the reactivity of TCNE involves its interaction with arylamines. Typically, the reaction proceeds via tricyanovinylation (TCV); however, deviations from the standard chemical process have been observed in some instances. These include the formation of heterocyclic structures through tricyanovinyl intermediates, aliphatic dicarbonitriles through the cleavage of the C–C bond of a tetracyanoethyl substituent, complexation, and various pericyclic reactions. Therefore, the objective of this study is to review the diverse modes of interaction of TCNE with aromatic nitrogen-containing compounds and to focus the attention of the chemical community on the synthetic capabilities of this reagent, as well as the various biological and optical activities of the structures synthesized based on TCNE.

Aliphatic allylic amines are common in natural products and pharmaceuticals. The oxidative intermolecular amination of C(sp3)-H bonds represents one of the most straightforward strategies to construct these motifs. However, the utilization of widely internal alkenes with amines in this transformation remains a synthetic challenge due to the inefficient coordination of metals to internal alkenes and excessive coordination with aliphatic and aromatic amines, resulting in decreasing the reactivity of the catalyst. Here, we present a regioselective Cu-catalyzed oxidative allylic C(sp3)-H amination of internal olefins with azodiformates to these problems. A removable bidentate directing group is used to control the regiochemistry and stabilize the π-allyl-metal intermediate. Noteworthy is the dual role of azodiformates as both a nitrogen source and an electrophilic oxidant for the allylic C-H activation. This protocol features simple conditions, remarkable scope and functional group tolerance as evidenced by >40 examples and exhibits high regioselectivity and excellent E/Z selectivity. The oxidative intermolecular amination of C-H bonds represents a straightforward method to construct aliphatic allylic amines. However, the utilization of widely available internal alkenes remains a synthetic challenge. Here, the authors present a regioselective Cu-catalyzed oxidative allylic C-H amination of internal olefins with azodiformates. [ABSTRACT FROM AUTHOR]

The heating process is a crucial step that can lead to the formation of several harmful chemical compounds in red meat such as heterocyclic aromatic amines, N-Nitrosamines, polycyclic aromatic hydrocarbons and acrylamide. Meat has high nutritional value, providing essential amino acids, bioactive compounds and several important micronutrients which can also be affected by heating processes. This review aims to provide an updated overview of the effects of different heating processes on both the safety and nutritional parameters of cooked red meat. The most-used heating processes practices were taken into consideration in order to develop a risk–benefit scenario for each type of heating process and red meat. [ABSTRACT FROM AUTHOR]

Aromatic amines (AAs) are an important class of organic compounds that find their application in various industries, such as dye production, rubber manufacturing, and pharmaceutical synthesis. Despite the various applications, they significantly harm human health and the environment. This article provides an overview of the toxicity, hazards, and safe handling of some primary aromatic amines (PAAs), focusing on representative examples, such as aniline, toluidine, nitroaniline, chloroaniline, and naphthylamine. The carcinogenicity and mutagenicity of PAAs are a matter of concern that impacts the health of workers who are occupationally exposed to such chemicals. Nonoccupational exposure to tobacco smoke and household products also causes health issues in elderly patients who remain indoors. Water and soil contamination by these pollutants adversely affects aquatic organisms and groundwater quality. Thus, proper handling and disposal protocols must be followed to minimize their impact on human health and the environment. Additionally, this review discusses the discrepancies between the European Union (EU) and Japan's hazard categorization for aniline as a specific example. The information presented in this review emphasizes the importance of understanding toxicity, hazards, and safe handling practices associated with PAAs to ensure their responsible use and mitigate potential risks. [ABSTRACT FROM AUTHOR]

Premature ovarian insufficiency (POI) is a condition in which the quantity of follicles and the quality of oocytes gradually decrease. This results in an estrogen secretion disorder and abnormal follicle development, which can lead to related diseases, early onset of menopause, sexual dysfunction, and an increased risk of cardiovascular issues, osteoporosis, and depression, among others. This disease significantly impacts the physical and mental health and overall quality of life of affected women. Factors such as genetic abnormalities, oophorectomy, radiotherapy for malignancy, idiopathic conditions, and an unhealthy lifestyle, including smoking, can accelerate the depletion of the follicular pool and the onset of menopause. Extensive research has been conducted on the detrimental effects of tobacco smoke on the ovaries. This article aims to review the advancements in understanding the impact of tobacco smoke on POI, both in vivo and in vitro. Furthermore, we explore the potential adverse effects of common toxicants found in tobacco smoke, such as polycyclic aromatic hydrocarbons (PAHs), heavy metals like cadmium, alkaloids like nicotine and its major metabolite cotinine, benzo[a]pyrene, and aromatic amines. In addition to discussing the toxicants, this article also reviews the complications associated with POI and the current state of research and application of treatment methods. These findings will contribute to the development of more precise treatments for POI, offering theoretical support for enhancing the long-term quality of life for women affected by this condition. [ABSTRACT FROM AUTHOR]

The objective of this study was to compare the selected mechanical properties of epoxy compounds based on an unmodified epoxy resin with those containing an antiseptic as a modifying agent. Experiments were carried out on twelve epoxy compounds made of an epoxy resin based on bisphenol A (BPA) with a basic epoxide amount of 0.48–0.51 mol/100 g. Three curing agents were used: one polyamide (a polyaminoamide curing agent) and two amines (one was an adduct of aliphatic amine and aromatic glycidyl ether, and the other was an adduct of cycloaliphatic amine). The epoxy compounds were modified by adding an antiseptic in the form of powdered boric acid (H3BO3) in three amounts: 0.5 g, 1.0 g, and 1.5 g. The cured modified and unmodified epoxy compounds were subjected to compressive strength testing and microscopic examination. The experimental results showed that the epoxy compounds containing adduct of aliphatic amine (triethylenetetramine) and aromatic glycidyl ether as the amine curing agent, i.e., E5/ET/100:18, had the highest compressive strength out of all the tested epoxy compounds, with the highest value of 119 MPa obtained for the epoxy compound modified by the addition of 1.0 g boric acid. The epoxy compounds modified with boric acid acquired antiseptic properties and, for most cases, exhibited a higher compressive strength than the unmodified epoxy compounds (not lower than that specified by the manufacturer for unmodified epoxy compounds). [ABSTRACT FROM AUTHOR]

Paraburkholderia terrae strain KU-15 grows on 2- and 4-nitrobenzoate and 2- and 4-aminobenzoate (ABA) as the sole nitrogen and carbon sources. The genes responsible for the potential degradation of 2- and 4-nitrobenzoate and 2-ABA have been predicted from its genome sequence. In this study, we identified the pab operon in P. terrae strain KU-15. This operon is responsible for the 4-ABA degradation pathway, which involves the formation of a γ-glutamylated intermediate. Reverse transcription–polymerase chain reaction revealed that the pab operon was induced by 4-ABA. Herein, studying the deletion of pabA and pabB1 in strain KU-15 and the examining of Escherichia coli expressing the pab operon revealed the involvement of the operon in 4-ABA degradation. The first step of the degradation pathway is the formation of a γ-glutamylated intermediate, whereby 4-ABA is converted to γ-glutamyl-4-carboxyanilide (γ-GCA). Subsequently, γ-GCA is oxidized to protocatechuate. Overexpression of various genes in E. coli and purification of recombinant proteins permitted the functional characterization of relevant pathway proteins: PabA is a γ-GCA synthetase, PabB1-B3 functions in a multicomponent dioxygenase system responsible for γ-GCA dioxygenation, and PabC is a γ-GCA hydrolase that reverses the formation of γ-GCA by PabA. [ABSTRACT FROM AUTHOR]

Copyright of Baghdad Science Journal is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Imines are valuable key compounds for synthesizing several nitrogen-containing molecules used in biological and industrial fields. They have been obtained, as highly regioselective Markovnikov products, by reacting several alkynes with arylamines in the presence of three new N-Heterocyclic carbene gold(I) complexes (3b, 4b, and 6b) together with the known 1-2b and 7b gold complexes as well as silver complexes 1-2a. Gold(I) complexes were investigated by means of NMR, mass spectroscopy, elemental analysis, and X-ray crystallographic studies. Accurate screening of co-catalysts and solvents led to identifying the best reaction conditions and the most active catalyst (2b) in the model hydroamination of phenylacetylene with aniline. Complex 2b was then tested in the hydroamination of alkynes with a wide variety of arylamines yielding a lower percentage of product when arylamines with both electron-withdrawing and electron-donating substituents were involved. Computational studies on the rate-determining step of hydroamination were conducted to shed light on the significantly different yields observed when reacting arylamines with different substituents. [ABSTRACT FROM AUTHOR]

In this study, the efficiency of mechanically alloyed Fe80Si10B10 in degrading basic red 46 azo dye is investigated. Moreover, the influences of different parameters, such as pH and time, on the elimination of the aromatic derivatives obtained as by-products of the fracture of the azo group are also analyzed. After beginning the reduction to the normal conditions of pH (4.6) and temperature, the experimental findings showed a discoloration of 97.87% after 20 min. The structure and morphology of the nanocrystalline Fe80Si10B10 powder were characterized by SEM and XRD before and after use in the degradation process. The XRD patterns of the Fe–Si–B powder after redox reaction suggest that the valent zero Fe of the alloy is the reducing agent. Powdered cork was then used as a biosorbent for the removal of the by-products generated, resulting in increasing removal percentages from pH 7 (26%) to pH 9 (62%) and a contact time of 120 min. The FTIR spectrum of the cork after adsorption shows a shift of the bands, confirming the interaction with the aromatic amines. The present findings show that metallic powders and natural cork perform well together in removing azo dye solutions and their degradation products. [ABSTRACT FROM AUTHOR]

Selective defluorinative functionalization of trifluoromethyl group (–CF3) is an attractive synthetic route to the pharmaceutically privileged fluorine-containing moiety. Herein, we report a strategy based on photoexcited copper catalysis to activate the C–F bond of di- or trifluoromethylated arenes for divergent radical C–N coupling with carbazoles and aromatic amines. The use of different ligands can tune the reaction products diversity. A range of substituted, structurally diverse α,α-difluoromethylamines can be obtained from trifluoromethylated arenes via defluorinative C-N coupling with carbazoles, while an interesting double defluorinative C-N coupling is ready for difluoromethylated arenes. Based on this success, a carbazole-centered PNP ligand is designed to be an optimal ligand, enabling a copper-catalyzed C–N coupling for the construction of imidoyl fluorides from aromatic amines through double C-F bond functionalization. Interestingly, a 1,2-difluoroalkylamination strategy of styrenes is also developed, delivering γ,γ-difluoroalkylamines, a bioisostere to β-aminoketones, in synthetically useful yields. The DFT studies reveal an inner-sphere electron transfer mechanism for Cu-catalyzed selective activation of C(sp3)–F bonds. Selective defluorinative functionalization is a synthetic route to pharmaceutically important fluorine-containing compounds but activation of inert C–F bonds remains challenging. Here the authors report activation of di-or trifluoromethylated arenes for radical C–N coupling with carbazoles and aromatic amines using photoexcited copper catalysis. [ABSTRACT FROM AUTHOR]

The growing concern over the environmental impacts of industrial chemicals on aquatic ecosystems has prompted increased attention and regulation. Aromatic amines have drawn scrutiny due to their potential to disturb aquatic ecosystems. 4-chloroaniline and 3,4-dichloroaniline are chlorinated derivatives of aniline used as intermediates in the synthesis of pharmaceuticals, dyes, pesticides, cosmetics, and laboratory chemicals. While industrial applications are crucial, these compounds represent significant risks to aquatic environments. This article aims to shed light on aromatic amines' ecological and ecotoxicological impacts on aquatic ecosystems, given as examples 4-chloroaniline and 3,4-dichloroaniline, highlighting the need for stringent regulation and management to safeguard water resources. Moreover, these compounds are not included in the current Watch List of the Water Framework Directive, though there is already some information about aquatic ecotoxicity, which raises some concerns. This paper primarily focuses on the inherent environmental problem related to the proliferation and persistence of aromatic amines, particularly 4-chloroaniline and 3,4-dichloroaniline, in aquatic ecosystems. Although significant research underscores the hazardous effects of these compounds, the urgency of addressing this issue appears to be underestimated. As such, we underscore the necessity of advancing detection and mitigation efforts and implementing improved regulatory measures to safeguard the water bodies against these potential threats. [ABSTRACT FROM AUTHOR]

This paper describes the synthesis of a novel Cu–Ni bimetallic system comprising of magnetic nanoparticles, as the core, and 4-amino-3,5-bis(pyridin-2-yl)-1,2,4-triazole (4-ABPT), as a conjugated bridge, between nickel and copper species. With low Cu and Ni loading (0.06 mol% Ni, 0.08 mol% Cu), the resulting Fe3O4@SiO2@4-ABPT/Cu–Ni showed to be a highly efficient catalyst for the Sonogashira and C–N cross-coupling reactions. The developed catalyst was well characterized by FT-IR, XRD, EDX-mapping, FE-SEM, TEM, ICP, VSM, TGA/DTG/DTA, LSV, and XPS techniques. Fe3O4@SiO2@4-ABPT/Cu–Ni nanocatalyst was compatible with a wide range of amines and aryl halides in the Sonogashira and C–N cross-coupling reactions and offered desired coupling products in high to excellent yields under palladium- and solvent-free conditions. Based on the XPS results, the 4-ABPT ligand can adjust electron transfer between Ni and Cu in Fe3O4@SiO2@4-ABPT/Cu–Ni, promoting the formation and stabilization of Cu+ and Ni3+ species. Electronic interactions and the synergistic effect between these metals increased the selectivity and activity of Fe3O4@SiO2@4-ABPT/Cu–Ni catalyst in the Sonogashira and C–N cross-coupling reactions compared with its monometallic counterparts. Additionally, the magnetic properties of Fe3O4@SiO2@4-ABPT/Cu–Ni facilitated its separation from the reaction mixture, promoting its reuse for several times with no significant loss in its catalytic activity or performance. [ABSTRACT FROM AUTHOR]

The World Health Organization (WHO) reports that tuberculosis (TB) is one of the top 10 leading causes of global mortality. The increasing incidence of multidrug-resistant TB highlights the urgent need for an intensified quest to discover innovative anti-TB medications In this study, we investigated four new derivatives from the quinoxaline-2-carboxylic acid 1,4-dioxide class. New 3-methylquinoxaline 1,4-dioxides with a variation in substituents at positions 2 and 6(7) were synthesized via nucleophilic aromatic substitution with amines and assessed against a Mycobacteria spp. Compound 4 showed high antimycobacterial activity (1.25 μg/mL against M. tuberculosis) and low toxicity in vivo in mice. Selection and whole-genomic sequencing of spontaneous drug-resistant M. smegmatis mutants revealed a high number of single-nucleotide polymorphisms, confirming the predicted mode of action of the quinoxaline-2-carboxylic acid 1,4-dioxide 4 as a DNA-damaging agent. Subsequent reverse genetics methods confirmed that mutations in the genes MSMEG_4646, MSMEG_5122, and MSMEG_1380 mediate resistance to these compounds. Overall, the derivatives of quinoxaline-2-carboxylic acid 1,4-dioxide present a promising scaffold for the development of innovative antimycobacterial drugs. [ABSTRACT FROM AUTHOR]

The number of cigarette capsule users is increasing; however, a comprehensive epidemiological investigation comparing the harmfulness of capsule and non-capsule cigarettes, particularly concerning the composition of flavor components and mainstream smoke, is lacking. The present study aimed to investigate the effect of capsule burst on the compound composition of mainstream smoke by quantifying the Hoffmann list and flavor (geraniol, eugenol, menthofuran, and pulegone) in mainstream smoke with and without crushing the capsules. The findings indicate that while tar values tended to increase when the capsules were burst, there was no significant change observed in the other Hoffmann list components, such as nicotine, benzo[α]pyrene, tobacco-specific nitrosamines, aromatic amines, and phenolics. However, when the capsules burst, menthofuran and pulegone, which were present in the capsule and could cause toxicity, were found in the mainstream smoke via the International Standard Organization (1.5–4.0 μg/cig and 5.13–6.00 μg/cig smoking regime) and Health Canada Intense (12.8–18.2 μg/cig and 22.77–24.67 μg/cig smoking regime). Therefore, understanding the capsule composition is important, as the toxic components of the capsules can be inhaled as smoke, posing a potential health risk. [ABSTRACT FROM AUTHOR]

Organic amines are important compounds present in a wide variety of products, which makes the development of new systems for their detection an interesting field of study. New organometallic complexes of group 9 [MCp*X(2′-R-2-py-SBF)] (M = Ir, Rh; R = H, X = Cl (6), R = H, X = OAc (7), R = CHO, X = Cl (8)), and [IrCp*Cl(2′, 7-diCHO-2-py-SBF)] (9) (Cp* pentamethylcyclopentadienyl, SBF = 9,9'-spirobifluorene) bearing bidentate C–N ligands based on 9,9′-spirobifluorene were obtained and characterized by NMR spectroscopy, mass spectrometry, IR spectroscopy, and X-ray diffraction analysis when possible. The formation of a Schiff base to give complexes with the formula [MCp*Cl(2′-CH=NR-2-py-SBF)] (M = Ir, Rh; R = alkyl or aryl (10–12)), through condensation of an amine, and the aldehyde group present in these new complexes was studied leading to a selective reactivity depending on the nature of the amine and the metal center. While the iridium complexes only react with aromatic amines, the rhodium derivative requires heat for those but can react at room temperature with aliphatic amines. [ABSTRACT FROM AUTHOR]

Effectively inhibiting the formation of heterocyclic amines (HAs) and advanced glycation end products (AGEs) is crucial to human health. In the present study, chemical model systems were used to evaluate the inhibitory effects of seven hydrocolloids on HA and AGE formation. The results showed that hydrocolloids effectively inhibited the formation of two major AGEs. However, their inhibitory action against HA formation showed unexpected results, wherein alginic acid, carrageenan and konjac glucomannan promoted the formation of 2-Amino-1-methyl-6-phenylimidazo [4,5-b]pyridine (PhIP), harmane, norharmane and 2-amino-3,8-dimethyl-imidazo [4,5-f]-quinoline (MeIQx). Only chitosan and pectin showed significant inhibitory effects on HAs, reducing HA levels by 34.5–56.3% and 30.1–56.6%, respectively. In grilled beef patties, the addition of 1.5% chitosan and pectin significantly decreased AGE and HA content by 53.8–67.0% and 46.9–68.1%, respectively. Moreover, it had a limited impact on quality and sensory properties. Further mechanism studies conducted in model systems revealed that chitosan and pectin decreased the formation of key intermediates of AGEs and HAs. These findings suggest that chitosan and pectin are powerful inhibitors against AGE and HA formation with minimal impact on food quality. Therefore, their application in meat preparation and processing could effectively decrease human dietary exposure to HAs and AGEs. [ABSTRACT FROM AUTHOR]

Tattooing has been an enduring form of body art since ancient times, but it carries inherent health risks, primarily due to the complex composition of tattoo inks. These inks consist of complex mixtures of various ingredients, including pigments, solvents, impurities and contaminants. This literature review aims to shed light on the organic and inorganic contaminants present in tattoo inks prior to the implementation of the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) regulation in 2022. This review shows that the most common contaminants are polycyclic aromatic hydrocarbons (PAHs), with a concentration range of 0.005–201 mg/kg, mainly detected in black tattoo inks, and primary aromatic amines (PAAs), with a concentration range of 0.5–1100 mg/kg, and heavy metals such as lead (0.01–14.0 mg/kg) and chromium(VI) (0.16–4.09 mg/kg) which are detected in almost all tattoo inks. When compared to the new concentration limits outlined in REACH, it is clear that a significant part of these contaminants would be considered non-compliant. However, the results of the review are limited due to the lack of quantitative data on contaminants in tattoo inks. In addition, the future implementation of REACH is expected to lead to changes in the composition of tattoo inks, which will affect the presence of contaminants. [ABSTRACT FROM AUTHOR]