Search

The mechanical properties of industrially produced perforated steel plates are obtained by hardening and low-temperature tempering to produce a martensitic microstructure. Another morphological type of steel microstructure that allows for ultra-high strength and, at the same time, a level of ductility that qualifies it for use in armour is nanobainite. Research into nanobainitic steels has led to the development of plates manufacturing technology at a level that can be implemented in industrial production, and has confirmed the high potential of this material for use as additional armour in the form of perforated plates. This paper reports the results of research aimed at developing a technology for the production of perforated armour plates made of nanobainitic steel, with properties competitive with currently available perforated steel plates on the world market with the highest protective effectiveness under conditions of multi-hit firing tests with small and medium calibre ammunition. The tests were performed on 300 260 mm plates, with the nominal thicknesses of 8 mm, 6 mm and 4 mm, produced from industrially melted nanobainitic steel NANOS-BA. The protective effectiveness of nanobainitic perforated plates in a system with a solid armour steel backing plate of 500 HBW hardness was tested by multi-hit firing, according to the procedures set out in the STANAG 4569 and AEP-55 vol. 1 specifications (adapted to the format of tested plates), against selected projectile types assigned to protection levels 2 and 3. Based on the analysis of the results of the firing tests and the macroscopic and microscopic examinations of the perforated plates before and after firing, the optimum perforation method was selected and the most favourable geometrical and dimensional arrangements of the perforations were determined for different plate thicknesses.

Negative affective states affect quality of life for patients suffering from pain. These maladaptive emotional states can lead to involuntary opioid overdose and many neuropsychiatric comorbidities. Uncovering the mechanisms responsible for pain-induced negative affect is critical in addressing these comorbid outcomes. The nucleus accumbens (NAc) shell, which integrates the aversive and rewarding valence of stimuli, exhibits plastic adaptations in the presence of pain. In discrete regions of the NAc, activation of the kappa opioid receptor (KOR) decreases the reinforcing properties of rewards and induces aversive behaviors. Using complementary techniques, we report that in vivo recruitment of NAc shell dynorphin neurons, acting through KOR, is necessary and sufficient to drive pain-induced negative affect. Taken together, our results provide evidence that pain-induced adaptations in the kappa opioid system within the NAc shell represent a functional target for therapeutic intervention that could circumvent pain-induced affective disorders. VIDEO ABSTRACT.

Artykuł stanowi próbę ukazania wiarygodności filozofii sceptycznej oraz jej ścisłego związku z mądrością. Objaśniam w nim podstawowe założenia sceptycyzmu, które staram się następnie zrewidować w kontekście kilku nowoczesnych „tropów sceptycznych” (retoryczny charakter wszelkiej argumentacji, gry językowe L. Wittgensteina, hermeneutyczna koncepcja wiedzy). Uwzględniając najczęściej spotykane zarzuty w stosunku do filozofii sceptycznej, objaśniam ich ograniczenia, powołując się na uwagi Sekstusa Empiryka. W ostatniej części artykułu ukazuję sceptycyzm jako pewien sposób bycia, który posiada istotne walory moralne.

Artykuł ma na celu podsumowanie działań podejmowanych wokół organizacji i przebiegu pierwszego powojennego konkursu chopinowskiego. Artykuł jest próbą zebrania faktów, relacji wspomnień dotyczących działań podejmowanych przez środowisko kultury muzycznej w Polsce po II wojnie światowej. Autorka skupia się na dokładnym opisie organizacji oraz przebiegu IV Międzynarodowego Konkursu Chopinowskiego, wykorzystując informacje dotychczas istniejące jedynie w niezależnych źródłach. W artykule zostały wykorzystanie pamiętniki, biografie, autobiografie, zapiski prywatne, wywiady przedstawicieli kultury polskiej, filmy archiwalne i dokumenty filmowe Polskiej Kroniki Filmowej. Celowo nie wykorzystano wyimków z prasy, ponieważ więk- szość informacji prasowych została zawarta w nadmienionych pozycjach bibliograficznych. Z prze- analizowanych źródeł płynie zawarta w artykule opinia o tym, że organizacja pierwszego powojennego konkursu chopinowskiego w Warszawie była wydarzeniem wymagającym wzmożonego działania od wszystkich państwowych instytucji jak również prywatnego zaangażowania muzyków oraz pedagogów muzyki. Autorka uważa tak szczegółowy opis historyczno-kulturowy za słuszny i potrzebny, zwłaszcza w roku 2020, na który przypadła 210. rocznica urodzin Fryderyka Chopina i miał odbyć się XVIII Międzynarodowy Konkurs Pianistyczny im. Fryderyka Chopina.

The article aims at summarizing different activities undertaken to organize and run the first post- war Chopin piano competition. It is an attempt to collect facts, accounts and memories concerning actions initiated by Polish music culture environment after the Second World War. The author focuses on a detailed description of the organization and proceedings of the 4th International Piano Competition, making use of information that has existed in independent sources so far. The article uses diaries, biographies, autobiographies, private notes, interviews with representatives of Polish culture, archive films and documentaries belonging to the Polish Film Chronicle. Press excepts were not used on pur- pose, as most press information was included in the aforesaid bibliography entries. The analyzed sources let us conclude that the organization of the first post-was Chopin piano competition in Warsaw was an event requiring both the engagement of all state institutions and personal contribution of mu- sicians and music teachers. The author considers such a detailed historical-cultural account justified and necessary, especially in 2020, the 210th birth anniversary of Frederic Chopin, the year in which the 18th Frederic Chopin International Piano Competition was supposed to take place.

Artykuł ma na celu omówienie kierunków rozwoju repertuaru na duet kameralny gitarowo-fortepianowy. Podpierając się metodami z zakresu nauk historycznych, a także teorii muzyki, autorka zwraca uwagę na najważniejsze aspekty rozwoju repertuaru, na ten nietypowy w muzyce klasycznej skład, opierając się na danych z własnych kwerend oraz wywiadów z kompozytorami. Repertuar został ujęty całościowo: od czasu pojawienia się praktyki wykonawczej na obsadę gitary i fortepianu, czego początki obserwujemy w muzyce XVIII wieku, aż po kompozycje powstałe w roku 2020. Repertuar został podzielony na segmenty i sklasyfikowany według założeń autorki. Opisane zostały również najważniejsze, według autorki – aktywnie koncertującej – perspektywy brzmieniowe w wybranych utworach z położeniem nacisku na te środki kompozytorskie, które gwarantują równowagę brzmienia poszczególnych partii bez wieloaspektowych strat dla obydwu instrumentów.

The rapidly growing production and usage of lithium-ion batteries (LIBs) dramatically raises the number of harmful wastes. Consequently, the LIBs waste management processes, taking into account reliability, efficiency, and sustainability criteria, became a hot issue in the context of environmental protection as well as the scarcity of metal resources. In this paper, we propose for the first time a functional material—a magnetorheological fluid (MRF) from the LIBs-based liquid waste containing heavy metal ions. At first, the spent battery waste powder was treated with acid-leaching, where the post-treatment acid-leaching solution (ALS) contained heavy metal ions including cobalt. Then, ALS was used during wet co-precipitation to obtain cobalt-doped superparamagnetic iron oxide nanoparticles (SPIONs) and as an effect, the harmful liquid waste was purified from cobalt. The obtained nanoparticles were characterized with SEM, TEM, XPS, and magnetometry. Subsequently, superparamagnetic nanoparticles sized 15 nm average in diameter and magnetization saturation of about 91 emu g−1 doped with Co were used to prepare the MRF that increases the viscosity by about 300% in the presence of the 100 mT magnetic fields. We propose a facile and cost-effective way to utilize harmful ALS waste and use them in the preparation of superparamagnetic particles to be used in the magnetorheological fluid. This work describes for the first time the second life of the battery waste in the MRF and a facile way to remove the harmful ingredients from the solutions obtained after the acid leaching of LIBs as an effective end-of-life option for hydrometallurgical waste utilization.

In this paper, a multilobe conical bearing is analyzed. A lubricant modelled by a couple stress fluid flows in the bearing clearance. The Galerkin method is used to determine the mechanical parameters of multilobe journal bearings. An example of a two-lobe conical bearing is discussed in detail. The inertia of the flowing lubricant is taken into account in the analysis. It has been found that the increase of the couple stress generates an increase the pressure in the clearance.

At the tum of the 19,h and 20th centuries lots of religious communities were founded in the St John Baptist parish in Sokołów Małopolski. One of the most important was the Third Order of St Francis. Its foundation was preceded by many years of endeavours. The very idea was propagated by the inhabitant of Sokołów, Katarzyna Koziarz, who became the member of the secular family of Franciscan family in Rzeszów in 1890. Since then morę and morę people from Sokołów had joined the Tertiary. At the beginning of the 20“’ century those who took steps to popularize the Third Order were Katarzyna Koziarz in Sokołów, Maria Ożóg and Małgorzata Maksym in Wólka Sokołowska and Katarzyna Bąk in Trzebuska while the parish priests, Franciszek Stankiewicz and Leon Szado did little for this matter. The members of the Third Order got involved in lots of activities such as sup- porting the building of the church, providing necessary things for the church and making mass of- ferings. Serious steps to found the Third Order in Sokołów were taken by the parish priest Ludwik Bukała. He organized monthly meetings for the Third Order members. He also established contact with the Bemardine Father, Wiktor Biegus, who 27 April 1936 came to Sokołów and became ac- ąuainted with the tertiaries in the parish. The permission for the canonical establishment of tertiary congregation was granted 4 May 1936 by the ordinary of Przemyśl, Bishop Franciszek Bard. The official foundation of the congregation in Sokołów took place 24 May 1936. The local tertiaries chose St Ludwik as their patron. The congregation govemment was constituted at the first meeting. The parish priest became the director of the community and Katarzyna Koziarz was ap- pointed the superior. On the day of the foundation there were about 100 members. In the first three years of the existence of the Third Order there were 30 people who received the habits and 28 who were admitted to the profession. After the canonical establishment of the congregation, the tertiaries became morę active. They provided the church with sacred appurtenances and fumishings, as well as organising public adora- tion of the Holy Sacrament. They would also wash liturgical linens and adom altars. In 1937 they bought a chasuble with the image of St Francis, and in 1939 they donated a banner with the images of Mother of God and St Francis. In addition, the tertiaries founded their own library with religious books and magazines. The congregation gathered for meetings in the parish church every month. Besides, they had occasional private gatherings. In the first years of the existence of the congregation there were 19 meetings of the Counsel. There were also two visitations of the Sokołów congregation held by Father Cyryl from Rzeszów 11 July 1937 and 6 August 1939. The activities of the tertiaries were hindered by the outbreak of the Second World War.

A new Plan of Action seeks to build momentum and encourage more strategic action on advancing policy and practice in the area of internal displacement.

Magnetic van der Waals (vdW) materials have opened new frontiers for realizing novel many-body phenomena. Recently NiPS3 has received intense interest since it hosts an excitonic quasiparticle whose properties appear to be intimately linked to the magnetic state ofthe lattice. Despite extensive studies, the electronic character, mobility, and magnetic interactions of the exciton remain unresolved. Here we address these issues by measuring NiPS3 with ultra-high energy resolution resonant inelastic x-ray scattering (RIXS). We find that Hund’s exchange interactions are primarily responsible for the energy of formation of the exciton. Measuring the dispersion of the Hund’s exciton reveals that it propagates in a way that is analogous to a double-magnon. We trace this unique behavior to fundamental similarities between the NiPS3 exciton hopping and spin exchange processes, underlining the unique magnetic characteristics of this novel quasiparticle. [ABSTRACT FROM AUTHOR]

In the paper, the influence of both the bearing surfaces roughness as well as porosity of one bearing surface on the pressure distribution and load-carrying capacity of a curvilinear, externally pressurized, thrust bearing is discussed. The equations of motion of a pseudo-plastic Rabinowitsch fluid are used to derive the Reynolds equation. After general considerations on the flow in a bearing clearance and in a porous layer using the Morgan-Cameron approximation and Christensen theory of hydrodynamic lubrication with rough bearing surfaces the modified Reynolds equation is obtained. The analytical solution is presented; as a result one obtains the formulae expressing the pressure distribution and load-carrying capacity. Thrust radial and conical bearings, externally pressurized, are considered as numerical examples.

The present theoretical analysis is to investigate the effect of non-Newtonian lubricant modelled by a Rabinowitsch fluid on the performance of a curvilinear squeeze film bearing with one porous wall. The equations of motion of a Rabinowitsch fluid are used to derive the Reynolds equation. After general considerations on the flow in a bearing clearance and in a porous layer using the Morgan-Cameron approximation the modified Reynolds equation is obtained. The analytical solution of this equation for the case of a squeeze film bearing is presented. As a result one obtains the formulae expressing pressure distribution and load-carrying capacity. Thrust radial bearing and spherical bearing with a squeeze film are considered as numerical examples.

Based upon a Gecim-Winer fluid flow model, a curvilinear squeeze film bearing is considered. The equations of motion are given in a specific coordinates system. After general considerations on the Gecim-Winer fluid flow these equations are used to derive the Reynolds equation. The solution of this equation is obtained by a method of successive approximation. As a result one obtains formulae expressing the pressure distribution and load-carrying capacity. The numerical examples of the Gecim-Winer fluid flow in gaps of two simple bearings: radial and spherical are presented.

Based upon a Prandtl fluid flow model, a curvilinear squeeze film bearing is considered. The equations of motion are given in a specific coordinate system. After general considerations on the Prandtl fluid flow these equations are used to derive the Reynolds equation. The solution of this equation is obtained by a method of successive approximation. As a result one obtains formulae expressing the pressure distribution and load-carrying capacity. The numerical examples of the Prandtl fluid flow in gaps of two simple bearings are presented.

In the paper the effect of both bearing surfaces and the porosity of one bearing surface on the pressure distribution and load-carrying capacity of a squeeze film bearing is discussed. The equations of motion of a Bingham fluid in a bearing clearance and in a porous layer are presented. Using the Morgan-Cameron approximation and Christensen theory of rough lubrication the modified Reynolds equation is obtained. The analytical solutions of this equation for a squeeze film bearing are presented. As a result one obtains the formulae expressing pressure distribution and load-carrying capacity. A thrust radial bearing is considered as a numerical example.

In the paper the influence of bearing surfaces roughness on the pressure distribution and load-carrying capacity of a thrust bearing is discussed. The equations of motion of an Ellis pseudo-plastic fluid are used to derive the Reynolds equation. After general considerations on the flow in a bearing clearance and using the Christensen theory of hydrodynamic rough lubrication the modified Reynolds equation is obtained. The analytical solutions of this equation for the cases of a squeeze film bearing and an externally pressurized bearing are presented. As a result one obtains the formulae expressing pressure distribution and load-carrying capacity. A thrust radial bearing is considered as a numerical example.