Search

This paper studies the impact of digital economy development on carbon emissions, which is a hot topic in the field of environmental economics. This topic is within the scope of the Frontiers in Environmental Science and is particularly in line with the theme of Environmental Economics and Management section in the journal. Firstly, this paper constructs the Digital Economy Development Index and its variable indicators to measure the development of the digital economy. Secondly, this paper uses urban panel data to reveal the impact of digital economy development on carbon emissions, and further adopts IV method to deal with endogeneity issues. Thirdly, this paper performs the heterogeneity analyses depending on the characteristics of the city. The results can provide a basis for formulating differentiated policies. Fourthly, this paper further explores the mechanism by which the digital economy affects carbon peaking. The results show that the digital economy may influence carbon peaking through upgrading of the industrial structure, technical innovation, and energy consumption. [ABSTRACT FROM AUTHOR]

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry. [ABSTRACT FROM AUTHOR]

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided. [ABSTRACT FROM AUTHOR]

China has become the world largest paper and paperboard producer. However, pulp and paper industry has involved high resource consumption and severe pollution especially for water. This research has assessed the eco-efficiency of China's pulp and paper industry at the national level and provincial level. An overview regarding the cleaner production of China's pulp and paper industry was presented to reveal the measures for reducing environmental impact in the last two decades. Slacks-based measure was used to analyze the efficiency levels of 16 provinces' pulp and paper industries. To uncover the underlying causes of eco-efficiency performance, Malmquist–Luenberger index was calculated to discover the drivers of productivity growth of pulp and paper industries. Our results showed that the pollution treatment of China's pulp and paper industry has made progress in terms of water consumption and water pollution, although the absolute amount of pollution discharge is still large. Chemical oxygen demand emissions are still the first critical influencing factor of pulp and paper industry's inefficiency. Furthermore, efficiency progress was the dominating contribution of the industry's productivity growth between 2010 and 2013. The policies for adjusting the industrial structure of pulp and paper industry have resulted in the scale effects through eliminating backward production capacity and accelerating merger and acquisitions. Moreover, the productivity of pulp and paper industry was underestimated when the undesirable outputs were ignored. It indicates that the stricter environmental regulations have positive effects on paper companies to internalize environmental pressures in the production activities through environmental management. In the future, pulp and paper companies should further internalize the cost of pollution treatment through scale effects and technology improvement. [ABSTRACT FROM AUTHOR]

In 2017, a carbon emissions trading market will be launched nationwide by the China government. Calculating the enterprise carbon emissions is an important prerequisite and basis for trading. This paper discussed types of greenhouse gases, calculation boundaries and methods, energy consumption, carbon emissions, and intensity of a representative integrated pulp and paper mill in China based on China Guidance and Greenhouse Gas Protocol Tools. The results showed that there were 435,000 tonnes (t) of CO2 emissions from that mill in 2014 that did not contain emissions of biomass energy, which was 8 times higher than that of fossil energy. The pulp carbon intensity based on the mill was 0.230 t CO2/Adt, which accounted for 7.50% to 57.4% in other pulps' based on the product. Intensity based on Gross Domestic Product (GDP) was 1.090 t CO2e/1000 USD and accounted for 56.8% intensity in the China paper industry. The intensity based on sales accounted for 52.6% in the firstclass enterprise in the developed country. It also showed that intensity was influenced by the species of raw material, energy, and products, which provided the mill with measures for energy saving and emissions reduction to obtain the redundant carbon emissions in the trading. [ABSTRACT FROM AUTHOR]

Abstract: The pulp and paper industry is one of the most energy-intensive industries worldwide. In 2007, it accounted for 5% of total global industrial energy consumption and 2% of direct industrial carbon dioxide (CO2) emissions. An energy audit is a primary step toward improving energy efficiency at the facility level. This paper describes a plant-wide energy audit aimed at identifying energy conservation and CO2 mitigation opportunities at a paper mill in Guangdong province, China. We describe the energy audit methods, relevant Chinese standards, methods of calculating energy and carbon indicators, baseline energy consumption and CO2 emissions of the audited paper mill, and nine energy-efficiency improvement opportunities identified by the audit. For each of the nine options, we evaluate the energy conservation and associated CO2 mitigation potential. The total technical energy conservation potential for these nine opportunities is 967.8terajoules (TJ), and the total CO2 mitigation potential is equal to 93,453tonnes CO2 annually, representing 14.4% and 14.7%, respectively, of the mill’s total energy consumption and CO2 emissions during the audit period. [Copyright &y& Elsevier]

Paper as a consumer product offers a undisputed benefits to human society, and it has been proven to be critical in driving most sensitive needs of mankind—principally in areas of security, education, sanitation, and communication—and thus has been produced and consumed worldwide. Its sustainable production and usage is one topic that has featured prominently in many discussion fronts and more often than not ends with recommendations for an alternative source of raw material, improvement in production procedures, and ecological concerns. Paper use is an ecological concern that has triggered many paper intervention actions around the world such as the Paper Task Force in USA, Sustainable Paper Alliance in China, and Paper and Beyond in Europe. In Nigeria, however, challenges associated with paper production, consumption, and economic prospects have not been adequately tackled. This is conspicuously evident in the huge volume of paper products imported annually into the country as a result of unsustainable local production. The cumulative impact of these issues reflect negatively on the Nigeria's paper industry and spread indirectly to the entire country's economy in terms of high capital freight spent on importation, volatile product price, and loss of employment opportunities. This work sought to review the challenges and opportunities associated with raw material sources, energy and water consumption, environmental pollution, paper consumption, and disposal of used paper products in Nigeria. The current review also advocated for wastepaper as a variant of raw material with a sustainable potential. [ABSTRACT FROM AUTHOR]

To reduce energy use and achieve a low carbon production in pulp and paper industry (PPI), it is essential to improve energy efficiency in pulp and paper production. In this study, the energy savings from the PPI were estimated based on a techno-economic analysis by EAGER tool for PPI at the factory level. The structure and implement procedure were introduced initially. Two typical pulp and paper mills from China were determined to estimate the impact of selected energy efficiency technologies (EETs) on energy savings as the cases in the base year. One Factory (A) only produced paper products (i.e. corrugated paper and Kraft linerboard) while the other Factory (B) also produced market pulp besides sack paper. In totally 22 selected EETs were applied to assess their saving potential in Factory A, and 29 measures were applied in Factory B. The results show that 2290 TJ and 1179 TJ of final energy could be saved annually in Factory A and B, corresponding to reduction of 29.4% and 13.6% total energy consumption respectively for the case factories. The CO 2 reduction potential was 32.3% for Factory A compared with that of 16.6% in Factory B. It suggests that the pulp and paper mills should encouraged to use this method estimating energy saving potential, and improve their energy efficiency with suggested measures in order to reduce energy consumption and related carbon emissions further in the coming years. • Energy savings of pulp and paper production were estimated at the factory level. • A techno-economic evaluation tool was applied to access the energy savings and carbon emission reductions. • Two typical pulp and paper factories from China were investigated to estimate their energy savings in the base year. • It is useful to assess energy savings and select feasible EETs in achieving energy saving and emission reduction targets. [ABSTRACT FROM AUTHOR]

Papermaking is a water intensive industry. The growth of paper demand will further intensify the need of fresh water resources. Papermaking involves complex processing routes. Previous investigations of water consumption in papermaking industry have focused primarily on key processes and pathways, ignoring the impacts of many intermediate and inter-related processes in paper production cycles and there underestimating the sustainability impacts. Herein, the results of a life cycle analysis of water consumption for papermaking industry in China using an extensive system boundary that includes the water embedded in intermediate processing are presented. The results show the life cycle water consumption and water saving potentials for different papermaking pathways. The advocacy of "forest pulp and paper integration" may have few practical contribution to reducing water consumption due to the low indirect water consumption of raw materials and energy for transportation. [ABSTRACT FROM AUTHOR]

Based on panel data for 30 provinces in China from 2000 to 2020, this paper uses entropy method to construct the integrated development indicators of energy Internet, and explores the impact of the development of the energy Internet on reducing carbon emissions in China and its internal transmission mechanism. The research results show that the development of energy Internet can significantly reduce regional carbon dioxide emissions, and increasing the use of renewable energy is an important mechanism for the comprehensive development of energy Internet to curb carbon emissions. Heterogeneity analysis shows that the emission reduction effect brought by the development of energy Internet is more remarkable in the regions with lower carbon emissions and western China. Furthermore, this paper finds that in the setting of the development of energy Internet, the development of renewable energy can promote natural gas consumption and advance energy conversion efficiency. The government's emphasis on regional technology development has an external strengthening effect on carbon emission reduction. The research in this paper expands and diversifies carbon reduction pathways and provides reference for more developing countries to utilize the development of energy internet to achieve carbon reduction. [ABSTRACT FROM AUTHOR]

This paper uses the exogenous shock of China's formal implementation of the environmental information disclosure system in 2008 to construct a quasi-natural experiment. Based on the panel data of prefecture-level cities from 2003 to 2019, the propensity score matching and difference in difference (PSM-DID) approach was used to systematically evaluate the impact of environmental information disclosure on energy efficiency. Overcoming the difficulties in measuring environmental information disclosure and the endogenous problem, this paper investigates the energy-saving effect of environmental information disclosure and illustrates its mechanism for the first time. The results show that environmental information disclosure significantly improved energy efficiency, and public participation played an important role in energy conservation, a conclusion that remained true after a series of robustness tests. The test of the impact mechanism shows that environmental information disclosure can achieve the goal of improving energy efficiency by promoting industrial structure upgrading and technological innovation. This paper enriches the discussion on the relationship between environmental information disclosure and energy efficiency, and provides useful policy inspiration for improving the level of energy efficiency and achieving sustainable economic development. [ABSTRACT FROM AUTHOR]

Background: Optimizing the energy consumption structure (ECS) is conducive to promoting the efficiency and quality of regional green economic development (GED). This paper discusses the current situation of green economic development (GED) in China and how optimizing the energy consumption structure (ECS) can promote green economic development (GED). Methods: A systematic literature search (from January 2013 to July 2024) was conducted using the keywords "green economic development" and "energy consumption structure" in the following databases: Web of Science, Embase, Science Direct, and PubMed. In this paper, the entropy method was used to measure the GED indicator system, Arcgis drawing was applied to show the current status of GED development, and the theme of this paper was investigated by constructing the basic regression model, Spatial Durbin model, mediating effect model, and moderating effect model. Two researchers independently screened and extracted data. Results: The analysis of empirical tests in 30 provinces yielded the following results: The overall development of China's GED shows a fluctuating upward trend. However, there is a regional development imbalance, and the development level of the eastern region is significantly higher than that of the central and western regions. The optimization of ECS contributes significantly to the improvement of GED. And the effect of optimizing ECS on GED has an apparent spatial spillover effect. The optimization of ECS in neighboring regions also promotes the increase of GED in the region, and this feature is more obvious in the central and western regions. The spatial effect of ECS optimization on GED is shown as Central Region > Western Region > Eastern Region. The total effect of the upgrading of the energy consumption structure and its impact on surrounding areas is shown in the following regions: Western region > Central region > Eastern region. The analysis of the mechanism effect shows that upgrading industrial structure is the main mechanism for optimizing ECS on GED. Discussion: The results show that the optimization and upgrading of ECS is the driving force behind the development of GED, and that there is a need to break down barriers between regions to promote the common development of GED, as well as to play a role in the mechanism of industrial structure. [ABSTRACT FROM AUTHOR]

The government's environmental protection policy can significantly contribute to alleviating resource shortages and curbing environmental pollution, but the impact of various policy instruments implemented by the government on energy efficiency is unclear. Based on the panel data of 30 provinces in China from 2005 to 2021, this paper analyses the impact of environmental regulation and the industrial structure on energy efficiency from the perspective of resource taxes. The U-shaped relationship between environmental regulation and energy efficiency and between the optimization of industrial structure can significantly improve energy efficiency, and the optimization of industrial structure is conducive to weakening the initial inhibitory effect of environmental regulation. In addition, the analysis of regional heterogeneity showed that the impact of environmental regulation was stronger in the central and western regions, while the impact of industrial structure was stronger in the eastern and western regions. The conclusions of this study can help to expand the understanding of the relationship between environmental regulation and industrial structure on energy efficiency, provide policy enlightenment for the realization of green development and high-quality development, and provide Chinese examples and experiences for developing countries to improve energy efficiency. [ABSTRACT FROM AUTHOR]

Effective forecasting of energy consumption structure is vital for China to reach its "dual carbon" objective. However, little attention has been paid to existing studies on the holistic nature and internal properties of energy consumption structure. Therefore, this paper incorporates the theory of compositional data into the study of energy consumption structure, which not only takes into account the specificity of the internal features of the structure, but also digs deeper into the relative information. Meanwhile, based on the minimization theory of squares of the Aitchison distance in the compositional data, a combined model based on the three single models, namely the metabolism grey model (MGM), back-propagation neural network (BPNN) model, and autoregressive integrated moving average (ARIMA) model, is structured in this paper. The forecast results of the energy consumption structure in 2023–2040 indicate that the future energy consumption structure of China will evolve towards a more diversified pattern, but the proportion of natural gas and non-fossil energy has yet to meet the policy goals set by the government. This paper not only suggests that compositional data from joint prediction models have a high applicability value in the energy sector, but also has some theoretical significance for adapting and improving the energy consumption structure in China. [ABSTRACT FROM AUTHOR]

Tourism has become a major driver of China's economic growth and consumes much energy causing environmental pollution problems. This paper combines the LMDI (logarithmic mean Divisia index) method and K-means clustering to analyze the factors influencing tourism energy consumption in seven Chinese provinces and discusses strategies for energy consumption in tourism. Specifically, firstly, this paper decomposes the tourism energy consumption factors in each province into six factors and identifies the driving forces of different factors on energy consumption. Secondly, K-means clustering method is used to classify different provinces into three categories using the latest dynamic influencing factors as clustering factors and provincial targeted suggestions are made according to the characteristics of different categories. This paper combines the LMDI model with cluster analysis to find targeted energy optimization strategies for the energy consumption of the Chinese tourism industry. [ABSTRACT FROM AUTHOR]

Improving energy efficiency is crucial for China's power industry to meet global energy conservation and emission reduction goals. The rapid development of photovoltaic (PV) and hydropower has greatly assisted in the construction of China's novel power system. The stochastic characteristics of PV power generation pose significant challenges to the reliable and economical scheduling of power systems. In fact, the cascade hydropower station can effectively address the issue. To fully utilize the advantages of hydropower, this paper proposes a bi-layer scheduling optimization model for the cascade hydro-PV complementary system considering power market. The upper-layer model simultaneously maximizes the benefit and minimizes the output volatility of the complementary system. The lower-layer model carries out market clearing with the objective of social cost. Besides, PV uncertainty and market price volatility are considered in the decision-making process for power market transactions. To solve the bi-layer model, a novel meta-heuristic algorithm (geometric mean optimizer) is applied, demonstrating excellent performance compared to similar methods. For the complementary system, the results show that its total power output can be improved, and its output volatility can be effectively alleviated. [ABSTRACT FROM AUTHOR]

In this paper, 22 indexes are selected at three levels, including the informatization development level, the Internet development level, and the digital transaction development level, based on China's provincial panel data from 2011 to 2020, so as to build a digital economy development index system. Moreover, 28 basic indexes are selected from three aspects, including energy construction, energy production and energy consumption, so as to develop an energy economy development evaluation index system. The development index of China's digital economy and energy economy are measured by using the entropy weight method. The effect of the digital economy on the energy economy and its mechanism are tested by the static panel, the dynamic panel, and the mediating effect and regulating effect models. The results indicate that the digital economy has pronouncedly promoted the development of China's energy economy, and the development of the digital economy can have an effect on the rationalization of the industrial structure and then affect the development of the energy economy, and there is an intermediary effect. Moreover, the upgrading of the industrial structure is conducive to regulating the digital economy and facilitates the development of the energy economy. The development of the energy economy can be better promoted by focusing on the coordinated regional layout of the digital economy development, building a reliable energy commodity trading platform, and expediting the optimization and upgrading of the industrial structure. [ABSTRACT FROM AUTHOR]

In the conditions of the spread of globalization processes, growing interdependence, and interconnectedness of countries, a significant intensification of the academic society efforts to ensure national energy security and independence is necessary. The purpose of the paper is to provide a systematic review of the scientific environment aimed at analysing the contents and features of scientific publications dealing with new trends and patterns in sustainable energy consumption. In order to create a semantic and definition basis and research the main trends of scientific publications on the subject of developing energy efficiency and sustainable consumption, the paper carried out a bibliometric analysis concerning the categories «energy efficient» and «energy consumption» using the Scopus and VOSviewer tools. The main question is, what are the main scientific and research trends and patterns in the field of energy efficiency and sustainable consumption? For this purpose, the quantity and quality tendencies of the scientific articles which are studying issues connected with energy efficiency and sustainable consumer behaviour were determined. A sample of more than 24000 scientific publications on this issue was generated from publications indexed by the Scopus database. The study period covers 2001-2021. On the global level, the analysed investigated area is represented by the countries: China, the USA, and India. VOS viewer tools were used to systemize 5 clusters of scientific articles that analysed sustainable energy consumption from different points of view. Identification of regularities in the developing of scientific approaches to energy-efficient consumption and developing sustainable energy sector was carried out using bibliometric analysis, which has made it possible to describe the dominant retrospective evolutionary and temporal tendencies in the development of this theory concerning the concepts of sustainable development, environmental management, and development of renewables. As a result, one of the most significant trends is a green brand and tendencies connected with developing green marketing and green consumer awareness. [ABSTRACT FROM AUTHOR]

Encouraging farmers to adopt greener and cleaner energy is crucial for reducing energy pollution and achieving carbon neutrality goals. In rural China, the decision making of farmers is often closely related to the whole family. At different stages of the family life cycle, the family has different characteristics, which leads to heterogeneity in the focus and final decision of farmers in adopting living clean energy. Therefore, this paper studies the farmers' living clean energy adoption behavior from the perspective of the family life cycle. It is helpful to identify the different policy needs and the evolution of farmers in different stages in order to provide a reference and inspiration for encouraging the adoption of living clean energy by farmers and for promoting the development of clean energy in rural areas. Based on the survey data of 1382 farmers in Jiangxi Province, this paper uses a multiple linear regression model to explore the impact of the family life cycle on farmers' clean energy adoption behavior. The results show the following: (1) The family life cycle has a significant impact on farmers' living clean energy adoption behavior, which is reflected in four aspects: energy demand, livelihood strategy, health demand and support burden; (2) Awareness of environmental ecology and frequency of government promotion have significant positive effects on farmers' living clean energy adoption behavior, while gender has significant negative effects on farmers' clean energy adoption behavior; (3) There are also differences in the influencing factors of farmers' living clean energy adoption behavior at different stages of the family life cycle. Therefore, when promoting clean energy in rural areas, a precise clean energy incentive mechanism should be adopted to treat families in different family life cycle stages differently. [ABSTRACT FROM AUTHOR]

The electric power sector is the primary contributor to carbon emissions in China. Considering the context of dual carbon goals, this paper examines carbon emissions within China's electricity sector. The research utilizes the LMDI approach for methodological rigor. The results show that the cumulative contribution of economies scale, power consumption factors and energy structure are 114.91%, 85.17% and 0.94%, which contribute to the increase of carbon emissions, the cumulative contribution of power generation efficiency and ratio of power dissipation to generation factor are -19.15% and -0.01%, which promotes the carbon reduction. The decomposition analysis highlights the significant influence of economic scale on carbon emissions in the electricity industry, among the seven factors investigated. Meanwhile, STIRPAT model, Logistic model and GM(1,1) model are used to predict carbon emissions, the average relative error between actual carbon emissions and the predicted values are 0.23%, 8.72% and 7.05%, which indicates that STIRPAT model is more suitable for medium- to long-term predictions. Based on these findings, the paper proposes practical suggestions to reduce carbon emissions and achieve the dual carbon goals of the power industry. [ABSTRACT FROM AUTHOR]

Typical public institutions such as government offices, hospitals, and schools play important leading and exemplary roles in the green and low-carbon development of the whole society. This paper analyzes the business and energy consumption characteristics of public institutions, as well as the characteristics of personnel travel, and constructs a carbon accounting model for public institutions. It innovatively proposes a methodology for carbon accounting of personnel travel related to public institutions and validates and analyzes it using a comprehensive hospital as an example. The paper analyzes the carbon emission characteristics of various energy types, systems, and types of travelers in hospitals, provides schemes for the transformation of main energy systems, and corresponding emission reduction effects, thereby providing technical support for the full-chain carbon accounting of public institutions. Additionally, this paper explores the carbon reduction pathways for hospitals to support the peak carbon and carbon neutrality goals of public institutions, and promote the high-quality development of public institutions in China. [ABSTRACT FROM AUTHOR]

Energy is known as the lifeline of national development, and from the last decade or so, the security of human energy supply has been frequently disturbed by natural disasters due to global warming and frequent geological activities. In this paper, by combing the literature, we found that the past literature on the relationship between energy and natural disasters mainly focused on measuring energy consumption under natural disasters, but less on the integrated evaluation of human economic activities, energy security and natural disasters, and less on the evaluation of the energy governance efficiency of each provincial, municipal, and autonomous region government in preventing and managing exposure to natural disasters from the perspective of Chinese provinces. Therefore, in order to fill the gap in the literature in this field, this paper collects panel data of energy consumption efficiency stages and natural disaster treatment stages from 2013 to 2017 for 30 provinces in China (excluding Hong Kong, Macao and Taiwan as well as Tibet Autonomous Region) and uses the two-stage undesirable dynamic DDF model as a framework to study the relationship between economic, environmental pollution and natural disasters for the sample data and to analyze the phase-by-phase evaluation of energy and natural disaster efficiency and make corresponding policy recommendations. The following conclusions are drawn: (1) The overall efficiency of China's eastern coastal provinces is higher than that of the central and western provinces. (2) The first-stage efficiency of Chinese provinces is better than the second stage, and the difference in efficiency of the first stage of each province is smaller than that of the second stage. (3) In terms of the efficiency of disaster prevention and relief inputs, the efficiency values are generally lower in most regions of China. (4) Finally, the annual efficiency of natural disaster losses is not high in all regions, and the efficiency values are higher in the eastern coastal regions than in the central and western regions. Accordingly, this paper proposes that each province should formulate relevant disaster prevention and economic development strategies according to regional characteristics, while the central government should also propose locally appropriate coordinated governance policies to effectively control carbon dioxide emissions and air pollution, as well as increase disaster prevention publicity and incorporate disaster prevention education-related work into the performance assessment mechanism of local governments to promote the interactive development of the two. [ABSTRACT FROM AUTHOR]

Under the new development model, the digital economy has become a new engine to promote the green development of the economy and realize the goal of "double carbon". Based on the panel data of 30 provinces in China from 2010 to 2020, this paper empirically investigates the impact of the development of the digital economy on energy and carbon emissions using a series of econometric models such as baseline regression, a mechanism test, and the spatial Durbin model, etc. Common prosperity plays an intermediary role between digital economy development and carbon emissions; digital economic development optimizes resource allocation, effectively solves the problem of uneven resource distribution, and reduces energy and carbon emissions while achieving common prosperity. In addition, green innovation, industrial structure, urbanization level, R&D intensity, and the degree of marketization also have different degrees of influence on energy and carbon emissions. Therefore, the government should accelerate the construction of new digital infrastructure and implement the digital economy development strategy according to local conditions, so as to promote the digital economy to produce a more significant carbon emission reduction effect. [ABSTRACT FROM AUTHOR]

This paper investigates the evolving landscape of blockchain technology in renewable energy. The study, based on a Scopus database search on 21 February 2024, reveals a growing trend in scholarly output, predominantly in engineering, energy, and computer science. The diverse range of source types and global contributions, led by China, reflects the interdisciplinary nature of this field. This comprehensive review delves into 33 research papers, examining the integration of blockchain in renewable energy systems, encompassing decentralized power dispatching, certificate trading, alternative energy selection, and management in applications like intelligent transportation systems and microgrids. The papers employ theoretical concepts such as decentralized power dispatching models and permissioned blockchains, utilizing methodologies involving advanced algorithms, consensus mechanisms, and smart contracts to enhance efficiency, security, and transparency. The findings suggest that blockchain integration can reduce costs, increase renewable source utilization, and optimize energy management. Despite these advantages, challenges including uncertainties, privacy concerns, scalability issues, and energy consumption are identified, alongside legal and regulatory compliance and market acceptance hurdles. Overcoming resistance to change and building trust in blockchain-based systems are crucial for successful adoption, emphasizing the need for collaborative efforts among industry stakeholders, regulators, and technology developers to unlock the full potential of blockchains in renewable energy integration. [ABSTRACT FROM AUTHOR]

Green consumption has become an important part of an environmentally friendly society. Policy guidance can effectively promote green consumption. Green consumption policies are extensive because of the diversity of green consumption objects. However, the various objects are not completely isolated, and policy must have a certain level of consistency. Therefore, from the perspective of green consumption objects, this paper first uses the text mining method to mine 308 green consumption policies in China, analyzing the objects covered in China's green consumption policies. Then, the evaluation system of green consumption policy consistency was built, seven key policies were selected, and the PMC-index method was used to measure policy consistency. The results show that (i) the main objectives of China's green consumption policy are the promotion of green products and the efficient use of energy. Green services and green recycling have been subject to fewer policy efforts. (ii) In terms of the links involved in green consumption, China pays more attention to the supply and the consumption chain and less attention to the recycling chain. (iii) The quantitative evaluation results of the seven typical policies show that the policy consistency is good but not perfect. The policy shortcomings are mainly reflected in the incentive methods. Therefore, it is recommended to further improve the green consumption objectives and enrich the means and methods of green consumption guidance. [ABSTRACT FROM AUTHOR]

The development and utilization of biomass energy based on the thermochemical conversion of crop biomass to produce hydrogen are of great significance for promoting China's ecological civilization construction, energy revolution, and low-carbon economic development. Henan province is one of the largest agricultural and pasturage provinces in China. Based on the analysis of the status and trends of Henan's biomass energy (BE) development, this paper summarizes the present status of the construction of ecological civilization (CEC) and the factors restricting its development. Challenges in developing biomass energy are analyzed systematically, and strategies and key technical directions for future biomass energy development are discussed. Finally, the paper presents countermeasures and suggestions for CEC based on the development of BE, which will vigorously promote the development and utilization of BE and the process of CEC. This research provides a reference for the further development of BE and CEC in the future. [ABSTRACT FROM AUTHOR]

Under the influence of the dual policies of sustainable economic development and the national dual-carbon target, the establishment of an environmental protection department for the treatment of heavily polluting industries is imminent, and the country has launched pollution control policies and regulations to restrict the emission rights of heavily polluting industries. Therefore, this paper focuses on whether the restriction of emission rights in key industries has reduced carbon emissions. To achieve this, this paper uses panel data of prefecture-level cities in China from 2006 to 2019 and adopts a two-way fixed-effects DID model to systematically analyze the impact of the key pollution industry governance policies launched by the Ministry of Environmental Protection on CO2 emissions in 2017. And further analyze the role of variables such as green technology innovation patents and energy efficiency using this model, while parallel trend tests and placebo tests, and related policies are used to ensure the robustness of the regression results. This paper reveals that: (1) The heavy pollution industry governance policy implemented in 2017 can effectively reduce CO2 emissions in the cities of the treated group, and the effect is more significant in the year of policy implementation; (2) Green utility patents and energy-use efficiency are the effective mediating mechanisms to reduce CO2 emissions; (3) Over time, the effect of heavy pollution industry governance policy on CO2 emissions gradually decreases; (4) The reliability of the baseline regression results of this paper is proved by the use of parallel trend tests, placebo tests, and tests excluding the influence factors such as relevant policies in the same period. Therefore, the key polluting industries treatment policy launched by China's Ministry of Environmental Protection in 2017 under the recent dual-carbon policy development goals formulated by China, can effectively reduce carbon emissions; however, in the future economic development process, the government should give more consideration to the continuity of the policy impact and its coherence on economic development when implementing the policy. [ABSTRACT FROM AUTHOR]

Based on the background of carbon neutrality targets, panel data of 30 Chinese provinces during 2000–2019 were selected in this paper to explore the nonlinear correlation mechanism among transportation, tourism development, renewable and non-renewable energy consumption and economic growth. Firstly, by employing a fixed effects model as the base model, we confirmed the existence of correlations among these variables. And the nonlinear moderating effects were also verified by setting interaction terms in the model. Secondly, we further discussed the characteristics of the nonlinear relationship among the variables by employing a threshold effects model. Our results demonstrated that the effect of transportation on economic growth is positive and significant if and only if renewable energy consumption surpasses a certain threshold. Meanwhile, we also found that the effect of tourism development on economic growth is positive when non-renewable energy consumption is under a certain threshold. Finally, our study indicated that transportation maintains a positive and significant effect on economic growth within any threshold of tourism development, and the positive effect gradually increases as the threshold rises. The findings of this paper suggested that for China, the contribution of transportation and tourism to economic growth can be expanded by further expanding the substitution of renewable energy for non-renewable energy. [ABSTRACT FROM AUTHOR]

After the carbon peaking and carbon neutrality goals were proposed, different institutions and scholars carried out research on China's medium- and long-term mitigation pathways. Through the literature review of China's research on carbon neutrality, this paper finds that the zero-carbon energy transition is the key to achieving carbon neutrality. The main driving factors of reducing energy-related carbon emissions include the cleanliness of primary and secondary energy supply systems, the electrification of energy consumption and the development of hydrogen energy, energy efficiency improvement, carbon capture and storage (CCS), and negative emissions. Furthermore, based on the literature, this paper conducts a quantitative comparative analysis, and selects key indicators for comparative analysis and summary from seven dimensions, including economic and social development, carbon emission pathways, primary energy consumption, final energy consumption, final hydrogen energy consumption, electricity demand and supply, and installed capacity and structure of power generation. Main conclusions are as follows: (i) In terms of carbon emission pathways, the institutions generally believed that China will peak carbon emissions around 2028 and achieve carbon neutrality between 2050 and 2060. Achieving net-zero or near-zero emissions first in the power sector is the key to carbon neutrality across the society; (ii) In terms of energy supply, it is a consensus to increase the proportion of clean energy and reduce carbon emissions from the source. The proportion of clean energy in primary energy will increase to more than 85%, and the proportion of clean energy power generation and installed capacity will reach more than 90%; (iii) In terms of energy use, electricity will become the core of final energy consumption in the future. The predicted electricity consumption across the society will range 14.3–18.4 PWh, and the predicted electrification rate will exceed 65%. [ABSTRACT FROM AUTHOR]

• A simple, large-scale fabrication of cooling paper via pulping and papermaking technology. • The cooling paper is facilely deconstructed and regenerated to architect the secondary cooler. • The cooling paper features a high solar reflectance of 94% and emissivity of 0.95. • The cooling paper shows the sub-ambient temperature drop of 6 ∼ 8.8 °C under directly solar radiation at daytime. Passive radiative cooling materials provide coldness without energy consumption for all-day thermal comfort by reflecting solar irradiation and emitting heat into the 3 K universe. However, the conventional radiative cooling materials involve complex multilayer structures and unsustainable polymers, showing the non-recyclable disadvantage, which induces resource waste and environmental issues. Herein, we reported a low-cost, scalable, and eco-friendly radiative cooling material (namely cooling paper), consisting of the delignified, fibrillated cellulose fibers and nano-sized hydroxyapatite (HA) via the mature pulping and papermaking process. The resulting cooled paper can be recycled, and it can be easily deconstructed to harvest cellulose fibers and HA, individually. The recovered source materials can be reused to prepare secondary products that show comparable performance to the original cooling paper, including a high solar reflectance of ∼94% and an infrared emissivity of ∼0.95 in the atmospheric transparency window. Such cooling paper enables superior cooling performance with the temperature drop of 6 ∼ 8.8 °C under directly solar radiation. Based on the EnergyPlus simulation, our cooling paper shows a average cooling energy saving of ∼29 % in buildings across China. The recyclable cooling paper with high cooling capability and scalability, as well as environmental friendliness, shows promising potential for sustainable energy-efficient buildings. [ABSTRACT FROM AUTHOR]

Since the power generation structures and load characteristics in each province in China are quite different, the distribution of peak regulating resources and demands are extremely imbalance. Restricted by a low power marketization degree, peak regulating resource shortages, and transmission channel blocks, the efficient utilization of new energy is facing greater pressures. In order to improve the mutual aid in regional power grids and to obtain more precise simulation results, this paper proposes a two-layer optimization dispatching model, considering the mutual aid of peak regulation resources between each province. It determines the optimal startup mode and the units' power output in each province and obtains the power output arrangements for all the units and the technical and economic indicators. The model and the solution method are original and innovative. And it effectively solved the unequal distribution problem between the peak regulating demands and resources of each provincial power grid. Finally, taking an actual regional power grid in China as an example, the simulation results show that the proposed model can significantly improve the utilization rate of new energy, which verifies the effectiveness and feasibility of the proposed model and methods presented in this paper. [ABSTRACT FROM AUTHOR]

This paper investigates whether and how tax and fee support policies at the firm level in China influence the total factor energy productivity of enterprises. Using panel data from Chinese public trading companies for the period 2004–2020, this study employs a panel model for estimation. The findings suggest that tax rebates contribute to the improvement of the total factor energy productivity of enterprises. Specifically, a 1% increase in tax refunds leads to a growth of approximately 0.008% in total factor energy productivity. Robustness tests and endogeneity checks confirm the validity of the results. Heterogeneity analysis reveals that tax rebates have a significant impact on state-owned enterprises, small- and medium-sized enterprises, and non-technology firms in terms of enhancing their total factor energy productivity. Mechanism analysis indicates that tax rebates facilitate firms in alleviating financing constraints and enhancing their innovation capabilities, thereby improving energy efficiency. The research findings of this paper provide empirical support for optimizing policy supply, improving energy usage efficiency, and promoting the development of a globally sustainable economy. [ABSTRACT FROM AUTHOR]

The current approaches to study the coupling mechanism between economy and environment seem to fall into self-circulation, failed to reveal "economy–environment interdependence". In this context, an exogenous variable is introduced into these models for better understanding the relationship. Benzo[a]pyrene (Bap) environment inventories in different cities in China were estimated by fugacity model based on Bap concentration data collected from previous studies. An extended model, stochastic impacts by regression on population, affluence and technology (STIRPAT), generated from original IPAT (a model that expresses the idea that environmental impact (I) is the product of three factors: population (P), affluence (A) and technology (T)) was used to study the relationship between Bap environment inventory and anthropogenic factors including population, vehicle amount, affluence and energy consumption. A ridge regression has been applied to optimize the model parameters. Overall, there exist good relationships between Bap inventories and economic factors. Specifically, population and affluence are the most significant factors that influence Bap inventory. Rise of the scale of population and vehicle amount increases the Bap inventory, as growth of GDP per capita and the efficiency of energy utilization have inhibitory effect on Bap inventory. Apparently, the influences of anthropogenic factors on Bap inventory are different between north and south China. Bap inventory in north China is more sensitive to the change of population and energy consumption, while is highly correlated to GDP per capita in south China. Further, according to social-economic development prediction, with assist of the result from STIRPAT model, we find out that Bap inventory drop 31% from 2001 to 2020 in China. Our estimates are comparable with the published data and confirmed that Bap can be regarded as a chemical indicator of social-economic development in China. Image 1 • An extended STIRPAT model derived from original IPAT was developed. • Population and affluence are the key factors that influence Bap inventory. • Advance of affluence and technology level curbs Bap environmental exposure. • We predict Bap environmental inventory drop 31% from 2001 to 2020 in China. • Bap can be used as an indicator of social-economic development in China. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has posed a severe challenge to the global economic recovery and China's economic growth. Although China has achieved stage victory against the epidemic, the impact and influence of the epidemic on China's economy will linger. On the positive side, the epidemic has led to a dramatic reduction in air pollution levels and a sharp slowdown in greenhouse gas emissions such as CO2. Forecasting China's CO2 emissions under the impact of the COVID-19 epidemic is crucial for formulating policies that contribute to smooth economic development and rational energy consumption. To this end, this paper improves on the traditional grey model, GM(1, N), by developing a novel fractional multivariate nonlinear grey model, FMNGM(q, N). These improvements include two key points. First, different power exponents are assigned to each relevant factor variable to explain their nonlinear, uncertain, and complicated relationships with the system characteristic variables. Second, the integer accumulation is changed to fractional accumulation to preprocess the data, and the Caputo-type fractional derivative is used to characterize the endogenous relationships among the system characteristic data. In addition, the quantum particle swarm optimization (QPSO) algorithm is used to optimize the above parameters with the goal of minimizing MAPE. The collected data on China's CO2 emission from 2001 to 2018 were divided into two parts according to different stages of economic development: 2001–2009 and 2010–2018. Both sets of data were modelled and analysed separately and compared with other models. Results showed that the proposed model had better prediction accuracy than other models. Finally, the model built using the 2010–2018 data was used to forecast China's CO2 emissions. Results show that China's CO2 emissions in 2020 under the impact of COVID-19 will decrease by approximately 3.15% from 2019 to 9893 million tons. The results bear important policy implications for planners in investment in clean energy and infrastructure to achieving the goal of a low-carbon transition. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative cooperative model for energy efficiency retrofitting that incorporates carbon emission rights, addressing critical financial constraints in Energy Performance Contracting (EPC). By employing the fuzzy analytic hierarchy process (F-AHP) to evaluate risk assessment indicators and stakeholder contributions and utilizing the enhanced Shapley method for equitable benefit distribution, the model demonstrates significant improvements in financing and efficiency for energy conservation projects. The findings are as follows: (1) the energy efficiency retrofit model, which integrates carbon emission rights, effectively alleviates the financial constraints and fosters energy conservation and emission reduction in guaranteed-savings EPC projects; (2) the enhanced Shapley method is deemed appropriate for the equitable distribution of energy-saving benefits among stakeholders; (3) when compared with the traditional model and the benefit allocation-absent carbon rights, the energy-saving benefits of the energy efficiency retrofit model incorporating carbon emission rights are higher in individual and overall terms. The findings of this study offer a viable solution to financing challenges faced by stakeholders in such projects and delineate a pragmatic approach for enterprises to enhance energy efficiency and reduce emissions. [ABSTRACT FROM AUTHOR]

CO2 capture from coal power plants is an important and necessary solution to realizing carbon neutrality in China, but CCS demonstration deployment in power sector is far behind expectations. Hence, the reduction potential of energy consumption and cost for CCS and its competitiveness to renewable powers are very important to make roadmaps and policies toward carbon neutrality. Unlike the popular recognition that capturing CO2 from flue gases is technically and commercially mature, this paper notes that it has been proved to be technically feasible but far beyond technology maturity and high energy penalty leads to its immaturity and therefore causes high cost. Additionally, the potential energy penalty reduction of capture is investigated thermodynamically, and future CO2 avoidance cost is predicted and compared to renewable power (solar PV and onshore wind power). Results show that energy penalty for CO2 capture can be reduced by 48%-57%. When installation capacity reaches a similar scale to that of solar PV in China (250 GW), CO2 capture cost in coal power plants can be reduced from the current 28-40 US$/ton to 10-20 US$/ton, and efficiency upgrade contributes to 67%-75% in cost reduction for high coal price conditions. In China, CO2 capture in coal power plants can be cost competitive with solar PV and onshore wind power. But it is worth noting that the importance and share of CCS role in CO2 emission reduction is decreasing since renewable power is already well deployed and there is still a lack of large-scale CO2 capture demonstrations in China. Innovative capture technologies with low energy penalties need to be developed to promote CCS. Results in this work can provide informative references for making roadmaps and policies regarding CO2 emission reductions that contribute towards carbon neutrality. [ABSTRACT FROM AUTHOR]

China's green financial pilot policies (GFPPs) are an important start to build a green financial system in China. It is also an important part of achieving the "dual-carbon" goal. This paper calculates China's total factor energy efficiency (TFEE), analyzes the impact of GFPPs on TFEE, and explores the conduction mechanism. The results show that the relationship between GFPPs and TFEE in the pilot areas is statistically significant. The GFPP mainly improves the TFEE through the green innovation effect and the optimization of the energy structure. The GFPP has a significant effect on TFEE enhancement in eastern coastal cities, non-old traditional industrial cities, and non-resource-based cities with high initial energy. China should continue to deepen the pilot work of green finance, formulate differentiated green finance policies, and ensure green technology innovation. This study provides empirical evidence for further optimization of green finance and energy efficiency. [ABSTRACT FROM AUTHOR]

In recent years, companies have employed numerous methods to lower expenses and enhance system efficiency in the oilfield. Energy consumption has constituted a significant portion of these expenses. This paper introduces a normalized consumption factor to effectively evaluate energy consumption in the oilfield. Statistical analysis has been conducted on nearly 45,000 wells from six fields in China. Critical factors such as lifting method, daily production, pump depth, gas–oil ratio (GOR), and well deviation angle were evaluated individually. Results revealed that higher production could lead to lower normalized consumption for beam pumps, progressive cavity pumps, and electric submersible pump systems, thus enhancing system efficiency. Additionally, a higher GOR might result in lower normalized consumption for the beam pump system, while the deviation angle of the well showed negligible impact on the normalized consumption factor. This manuscript offers a method to assess the impacts of artificial lift methods on production and discusses suggestions for reducing consumption associated with each lifting method in the oilfield. [ABSTRACT FROM AUTHOR]

This paper proposes a temperature-adaptive radiative cooling (TARC) coating with simple preparation, cost effectiveness, and large-scale application based on a thermochromic powder. To determine the energy efficiency of the proposed TARC coating, the heat transfer on the surface of the TARC coating was analyzed. Then, a typical two-story residential building with a roof area of 258.43 m2 was modeled using EnergyPlus. Finally, the energy-saving potential and carbon emission reduction resulting from the application of the proposed TARC roof in buildings under different climates in China were discussed. The results showed that the average solar reflectivity under visible light wavelengths (0.38–0.78 μm) decreases from 0.71 to 0.37 when the TARC coating changes from cooling mode to heating mode. Furthermore, energy consumption can be reduced by approximately 17.8–43.0 MJ/m2 and 2.0–32.6 MJ/m2 for buildings with TARC roofs compared to those with asphalt shingle roofs and passive daytime radiative cooling (PDRC) roofs, respectively. This also leads to reductions in carbon emissions of 9.4–38.0 kgCO2/m2 and 1.0–28.9 kgCO2/m2 for the buildings located in the selected cities. To enhance building energy efficiency, TARC roofs and PDRC roofs are more suitable for use on buildings located in zones with high heating demands and high cooling demands, respectively. [ABSTRACT FROM AUTHOR]

Knowledge of wind field characteristics and variation principles in complex topographical regions is of great importance for the development of numerical prediction models, aviation safety support, and wind energy utilization. However, there has been limited research focused on the lower-tropospheric wind fields in the Qinghai-Tibet Plateau. This paper aims to study the wind characteristics, vertical distributions, and temporal variations in the northeast of the plateau by analyzing a four-year continuous dataset collected from a Doppler wind LiDAR deployed in Xining, Qinghai Province of China. The results indicate that the prevailing horizontal wind direction in the low levels is primarily influenced by the mountain-valley wind circulation. However, as the altitude increases, the prevailing winds are predominantly affected by the westerlies. From a diurnal perspective, noticeable transition processes between up-valley and down-valley winds can be observed. The west-northwest wind (down-valley wind) dominates from late night to morning, while the east-southeast wind (up-valley wind) prevails from afternoon to early evening. The vertical winds in the low levels exhibit a downward motion during the daytime and an upward motion during the nighttime. In this plateau valley, the wind shear exponent is found to be highest in spring and lowest in winter, and it is generally lower during the daytime compared to the nighttime. [ABSTRACT FROM AUTHOR]

The development of renewable energy in China has made remarkable achievements, but the problem of renewable energy consumption has become increasingly prominent. This paper establishes a power market trading system for renewable energy, with the aim of promoting large-scale renewable energy consumption and increasing the enthusiasm of renewable energy producers and users to participate in market transactions. First, according to the power generation cost, the backup cost of renewable energy power plants and the possible quotation strategies of other renewable energy producers, a quotation model of renewable energy producers is established. In the clearing of the spot market by renewable energy producers, the independent market operator conducts the first-stage clearing of the electricity market with the goal of maximizing social welfare. After the announcement of the clearing results, the renewable energy producers that did not win the bid will revise their quotations and carry out the second stage clearing to realize the consumption of renewable energy. In this paper, the particle swarm algorithm combined with the CPLEX solver is used to solve the problem, and finally, different scenarios are analyzed through example analysis. The results show that, compared with the conventional power market trading mechanism, the energy abandonment rate of the power market trading mechanism for renewable energy proposed in this paper drops from 8.2% to 2.1%, and the profit margin of renewable energy producers increase by 6.6%. It is demonstrated that the proposed electricity market mechanism can effectively promote the consumption of renewable energy and increase the income of renewable energy producers. [ABSTRACT FROM AUTHOR]

The highlighted energy consumption of Internet data center (IDC) in China has become a pressing issue with the implementation of the Chinese dual carbon strategic goal. This paper provides a comprehensive review of cooling technologies for IDC, including air cooling, free cooling, liquid cooling, thermal energy storage cooling and building envelope. Firstly, the environmental requirements for the computer room and the main energy consumption items for IDC are analyzed. The evaluation indicators and government policies for promoting green IDC are also summarized. Next, the traditional cooling technology is compared to four new cooling technologies to find effective methods to maximize energy efficiency in IDC. The results show that traditional cooling consumes a significant amount of energy and has low energy efficiency. The application of free cooling can greatly improve the energy efficiency of IDC, but its actual implementation is highly dependent on geographical and climatic conditions. Liquid cooling, on the other hand, has higher energy efficiency and lower PUE compared to other cooling technologies, especially for high heat density servers. However, it is not yet mature and its engineering application is not widespread. In addition, thermal energy storage (TES) based cooling offers higher energy efficiency but must be coupled with other cooling technologies. Energy savings can also be achieved through building envelope improvements. Considering the investment and recovery period for IDC, it is essential to seek efficient cooling solutions that are suitable for IDC and take into account factors such as IDC scale, climate conditions, maintenance requirements, etc. This paper serves as a reference for the construction and development of green IDC in China. [ABSTRACT FROM AUTHOR]

The role of the transparent envelope in energy savings is crucial as it accounts for a significant proportion of the total energy loss (between 30 and 40%). This paper focuses on the identification of reasonable parameters for the transparent envelope in different climatic regions. To achieve this goal, typical urban office buildings from four different climatic regions are used as research objects. A total of 1600 scenarios were simulated to investigate the variation of energy use intensity, including transparent envelope parameters, meteorological parameters and different types of glazing. The results show that for south-facing transparent envelope facades, type D glazing is the most energy efficient in severe cold regions, type C in colder regions and type B in the other two climatic regions. No solar shading is required in the very cold region. Horizontal shading can be an effective method for saving energy in colder climates, while comprehensive shading can be beneficial in other regions. Deep shading is particularly energy efficient if it meets lighting requirements. For example, in Guangzhou, energy savings of 13.46%, 15.47%, 7.01% and 7.02% can be achieved in the east, west, south and north directions, respectively, using B-type glazing and a comprehensive shading depth of 900 mm. [ABSTRACT FROM AUTHOR]

Since their inception with Bitcoin in the late 2000s, cryptocurrencies have grown exponentially, reshaping traditional financial paradigms. This transformative journey, while innovative, brings forth pressing concerns about their energy consumption and carbon footprint. While many studies tend to zoom in on Bitcoin, this paper broadens the perspective by evaluating energy consumption across various cryptocurrencies. We analyze nine cryptocurrency projects, chosen for their market value, technology, and data availability. These span a spectrum from pioneering to emerging digital coins, offering a holistic view of the crypto realm. To contextualize, we juxtapose the energy usage of these digital currencies with traditional payment means like Visa and Mastercard. Our analysis shows vast differences in energy use among cryptocurrencies, largely tied to their consensus algorithms. Notably, while Bitcoin stands out as highly energy-intensive, several newer digital currencies have energy footprints mirroring those of conventional payment methods. Additionally, CO2 emissions estimation presents challenges due to variances in miner locations and regional energy sources, with potential higher emissions if concentrated in carbon-intensive regions like China. Nonetheless, the silver lining emerges as many cryptocurrencies, especially those beyond Bitcoin, register considerably lower CO2 emissions. By moving the lens beyond Bitcoin, this paper paints a more nuanced picture of the environmental ramifications of the crypto world. [ABSTRACT FROM AUTHOR]

Saving energy is an important strategy to address the current energy crisis and environmental degradation. Regarding the pilot policy of the energy quota trading as a quasi-natural experiment by employing a difference-in-differences method, the purpose of this paper is to investigate the effect of this pilot policy on energy saving and its mechanisms based on city-level data in China from 2006 to 2020. We find that the energy quota trading policy can reduce the total energy consumption and energy consumption intensity of pilot cities, and the effect of the policy can gradually strengthen over time. The market-oriented reform of energy factor allocation can effectively promote energy saving and economic growth. These results are convincing through a series of robustness checks. The heterogeneity test shows that the energy quota trading has a significant energy saving effect on economically developed cities, densely populated cities and southern cities, but not in economically underdeveloped cities, sparsely populated cities and northern cities. Further mechanism inspection suggests that the pilot policy of energy quota trading mainly achieves energy conservation through industrial structure upgrading and green technology innovation. Our findings provide a valuable insight for China to control energy consumption and promote the high-quality development of the energy economy. [ABSTRACT FROM AUTHOR]

(1) Background: The decoupling of energy consumption from economic growth in the construction industry is crucial to the sustainable development of the global construction industry. The existing studies focus on the advancements in energy efficiency by designers for building monoliths or construction techniques, involving no exploration of energy efficiency management from a regional perspective, which is unfavorable for the formulation of energy efficiency policies and systematic control of the construction industry by local governments. (2) Methods: From the perspective of regional management, this paper constructs an integrated analysis and application framework of "spatio-temporal characteristics + matching evaluation + policy design" based on the decoupling model and GIS tools. It studies the spatio-temporal characteristics of energy consumption in the construction industry in 30 provinces of China from 2010 to 2019, and its decoupling relationship with the economic development of the construction industry, and proposes an optimal zoning and recommendations for energy consumption in the construction industry, providing a reference for energy conservation management in the construction industry in China. (3) Results: First, the change of energy consumption amount (ECA) in the construction industry in the provinces was dominated by ascent, while the energy consumption intensity (ECI) predominantly decreased, and most provinces are still in a period of growth or plateau in energy consumption. Second, ECA and ECI had prominent spatial heterogeneity and aggregation. High-energy-consuming regions are concentrated along the coast and along the Yangtze River, while low-energy-consuming regions are mainly clustered in remote areas, such as the northeast, northwest, and southwest of China. Energy consumption shows a clear north-south difference in intensity, with high-intensity regions clustered in the north compared to low-intensity regions in the south. Third, most of the provinces were in strong negative decoupling, expansive coupling, and weak decoupling, and better decoupling regions were mainly gathered in south and central China. Nearly one half of these provinces showed decoupling degradation and only a few achieved evolution, with evolutionary regions clustered mainly in central and southern China. The northeast and northwest were the key problem areas of energy-saving transformation in China's construction industry. (4) Conclusion: The 30 provinces were divided into three types: leader, intermediate, and laggard, and the development goals and suggestions on low energy consumption in the construction industry for three zones were put forward, significantly improving the precision of policy design and implementation. The study in this paper expands the research perspective on energy saving management in the construction industry and provides a methodology and basis for developing energy efficiency policies and plans for the construction industry in China and similar developing countries. [ABSTRACT FROM AUTHOR]

South Africa possesses extremely rich renewable energy resources, including solar energy and wind energy, in spite of this, South Africa traditionally relies on coal as its primary energy source. Recently, South Africa confronted with severe electricity shortage. With pressure of power shortage and the transition to low- carbon energy, South Africa has been actively promoting the development of renewable energy, aiming to diversify its energy structure. China, as the world's leading country in the development and utilization of renewable energy, has long been committed to helping South Africa achieve renewable energy development. This article reviews the cooperation progress between China and South Africa in renewable energy, and provides an in-depth analysis of the challenges currently faced by both sides. To address such challenges, it is suggested to strengthen the design of top-level cooperation mechanisms, create diverse collaboration platforms, prioritize the exchange and collaboration of scientific talents. This paper aims to provide a typical reference for deepening renewable energy cooperation between China and South Africa. [ABSTRACT FROM AUTHOR]

Public institutions, emblematic of public infrastructure, exhibit extensive reach and operational scope, positioning them as vanguards in China's dual carbon initiatives and serving as exemplars. Electricity and natural gas predominantly fuel the operations of public institutions. Notably, the fixed commute routes and consistent procurement patterns of office personnel yield a standardized energy consumption profile within these entities. Researching carbon emissions related to commuting and evaluating procurement strategies for reducing carbon footprints in public institutions demonstrate a precision-tailored approach. This paper, through an analysis of the energy consumption characteristics, utilization structure of public institutions, and the commuting behaviors and procurement practices of office personnel, establishes a bespoke carbon accounting model specifically designed for public institutions, seamlessly embedded within a comprehensive platform. By providing fundamental methodological frameworks and advanced technological foundations for carbon accounting in public institutions across China, this work propels the nation's efforts towards carbon peak and ultimately carbon neutrality. [ABSTRACT FROM AUTHOR]

With the development of Non-Intrusive Load Monitoring (NILM), it has become feasible to perform device identification, energy consumption decomposition, and load switching detection using Deep Learning (DL) methods. Similar to other machine learning problems, the research and validation of NILM necessitate substantial data support. Moreover, different regions exhibit distinct characteristics in their electricity environments. Therefore, there is a need to provide open datasets tailored to different regions. In this paper, we introduce the Transient Dataset of Household Appliances with Intensive Switching Events (TDHA25). This dataset comprises switch instantaneous data from 10 typical household appliances in China. The TDHA dataset features a high sampling rate, accurate labelling, and realistic representation of actual appliance start-up waveforms. Additionally, appliance switching is achieved through precise control of relay switches, thus mitigating interference caused by mechanical switches. By furnishing such a dataset, we aim not only to enhance the recognition accuracy of existing NILM algorithms but also to facilitate the application of NILM algorithms in regions sharing similar electricity consumption characteristics to those of China. [ABSTRACT FROM AUTHOR]