Search

For most ultralong bus lines, low punctuality rates and vehicle bunching are two main challenges. One potential strategy to solve these two problems is to split an ultralong line into two or three shorter lines according to historical passenger flow patterns as well as other presetting objectives and constraints. Thus, in this paper, a multiobjective optimization model is first established in consideration of both passenger flow distribution and coline metro networks. Then, the optimal truncated stop is determined by estimating the model results generated by enumerating each potential bus stop derived from related metro stops. The nondominated sorting genetic algorithm II (NSGA-II) is applied to solve the model efficiently. A case study conducted on a real bus line associated with metro networks in Beijing, China, demonstrates the efficiency of the optimization strategy adoption in terms of operating cost and passenger travel time, even with a slight increase in passenger cost. Besides, the multivehicle type is also referred in the experiments to verify economic efficiency to reduce operational costs. [ABSTRACT FROM AUTHOR]

This paper aims to investigate the internal mechanisms of bottlenecks in bike-sharing travel. We perform kernel density analysis to obtain analysis points and areas designated by buffer areas. Additionally, we improve the spatial lag model through Tobit regression, so as to avoid the interference of autocorrelation and to set reasonable constraints for dependent variables. The proposed model distinguishes between bike-sharing demand determined by land use and other built environmental factors, which helps to define and identify bottlenecks in bike-sharing travel. Based on a Bayesian network fault tree, we define the diagnosis mode of evidence nodes to calculate the posterior probabilities and to determine the most sensitive factors for bottlenecks. We use Beijing city as the case study. The results show that the most sensitive factors that induce bottlenecks in bike-sharing travel are few subway stations, few bus stops, few bus lines, a low density of bike lanes, and more serious home–work separation. The findings presented here can enhance the generation of bike-sharing trips in response to bike-sharing development and contribute to adjusting the urban structure and reconstructing the green infrastructure layout. [ABSTRACT FROM AUTHOR]

In a multimodal public transport network, transfers are inevitable. Planning and managing an efficient transfer connection is thus important and requires an understanding of the factors that influence those transfers. Existing studies on predicting passenger transfer flows have mainly used transit assignment models based on route choice, which need extensive computation and underlying behavioral assumptions. Inspired by studies that use network properties to estimate public transport (PT) demand, this paper proposes to use the network properties of a multimodal PT system to explain transfer flows. A statistical model is estimated to identify the relationship between transfer flow and the network properties in a joint bus and metro network. Apart from transfer time, the number of stops, and bus lines, the most important network property we propose in this study is transfer accessibility. Transfer accessibility is a newly defined indicator for the geographic factors contributing to the possibility of transferring at a station, given its position in a multimodal PT network, based on an adapted gravity-based measure. It assumes that transfer accessibility at each station is proportional to the number of reachable points of interest within the network and dependent on a cost function describing the effect of distance. The R-squared of the regression model we propose is 0.69, based on the smart card data, PT network data, and Points of Interest (POIs) data from the city of Beijing, China. This suggests that the model could offer some decision support for PT planners especially when complex network assignment models are too computationally intensive to calibrate and use. [ABSTRACT FROM AUTHOR]

Public transportation is a crucial component of urban transportation systems, and improving passenger sharing rates can help alleviate traffic congestion. To enhance the punctuality and supply–demand balance of dedicated buses, we propose a hierarchical multi-objective optimization model to optimize bus guidance speeds and bus operation schedules. Firstly, we present an intelligent decision-making method for bus driving speed based on the mathematical description of bus operation states and the application of the Lagrange multiplier method, which improves the overall punctuality rate of the bus line. Secondly, we propose an optimization method for bus operation schedules that respond to passenger needs by optimizing departure time intervals and station schedules for supply–demand balance. The experiments were conducted in Future Science City, Beijing, China. The results show that the bus line's punctuality rate has increased to 90.53%, while the retention rate for platform passengers and the intersection stop rate have decreased by 36.22% and 60.93%, respectively. These findings verify the effectiveness and practicality of the proposed hierarchical multi-objective optimization model. [ABSTRACT FROM AUTHOR]

In China, overlapped routes from multiple bus lines are widespread. Some buses are overcrowded while others have few passengers. The goal of this study is to reduce onboard passenger crowding without wasting bus capacity. This paper examines an extended multiple-depot vehicle scheduling problem (VSP) with multiple vehicle types. First, a bi-objective integer programming model was created. The trade-off between operating cost and passenger travel cost was established and the crowding cost due to different vehicle sizes was especially considered. Then, the capacity restraint incremental assignment algorithm and a vehicle scheduling method with multiple vehicle types were developed to find Pareto-optimal solutions that considered vehicle capacity constraints. Finally, the proposed methodology was validated using a real-world transit network in Beijing, China. The optimization results from about 1.18 million bus card swiping records show that our model and solution algorithm can effectively reduce the passenger crowding cost and avoid the waste of transport capacity. [ABSTRACT FROM AUTHOR]

Purpose: Travel time at inter-stops is a set of important parameters in bus timetabling, which is usually assumed to be normal (log-normal) random variable in literature. With the development of digital technology and big data analytics ability in the bus industry, practitioners prefer to generate deterministic travel time based on the on-board GPS data under maximum probability rule and mean value rule, which simplifies the optimization procedure, but performs poorly in the timetabling practice due to the loss of uncertain nature on travel time. The purpose of this study is to propose a GPS-data-driven bus timetabling approach with consideration of the spatial-temporal characteristic of travel time. Design/methodology/approach: The authors illustrate that the real-life on-board GPS data does not support the hypothesis of normal (log-normal) distribution on travel time at inter-stops, thereby formulating the travel time as a scenario-based spatial-temporal matrix, where K-means clustering approach is utilized to identify the scenarios of spatial-temporal travel time from daily observation data. A scenario-based robust timetabling model is finally proposed to maximize the expected profit of the bus carrier. The authors introduce a set of binary variables to transform the robust model into an integer linear programming model, and speed up the solving process by solution space compression, such that the optimal timetable can be well solved by CPLEX. Findings: Case studies based on the Beijing bus line 628 are given to demonstrate the efficiency of the proposed methodology. The results illustrate that: (1) the scenario-based robust model could increase the expected profits by 15.8% compared with the maximum probability model; (2) the scenario-based robust model could increase the expected profit by 30.74% compared with the mean value model; (3) the solution space compression approach could effectively shorten the computing time by 97%. Originality/value: This study proposes a scenario-based robust bus timetabling approach driven by GPS data, which significantly improves the practicality and optimality of timetable, and proves the importance of big data analytics in improving public transport operations management. [ABSTRACT FROM AUTHOR]

The transport network structure plays a crucial role in transport dynamics. To better understand the property of the bus network in big city and reasonably configure the bus lines and transfers, this paper seeks to take the bus network of Beijing as an example and mainly use space L and space P to analyze the network topology properties. The approach is applied to all the bus lines in Beijing which includes 722 lines and 5421 bus station. In the first phase of the approach, space L is used. The results show that the bus network of Beijing is a scale-free network and the degree of more than 99 percent of nodes is lower than 10. The results also show that the network is an assortative network with 46 communities. In a second phase, space P is used to analyze the property of transfer. The results show that the average transfer time of Beijing bus network which is 1.88 and 99.8 percent of arbitrary two pair nodes is reachable within 4 transfers. [ABSTRACT FROM AUTHOR]