Search

Mitigation of global warming, energy security and industrial competitiveness urge the energy-intensive pulp and paper industry (PPI) to transform energy use practices. This study investigates how the PPI has responded to the need for the energy transition in the 2000s. Finland and Sweden as forerunners of energy-efficient operation and decarbonization of the PPI are used as target countries. Understanding of changes in energy consumption is complemented using decomposition analysis (Logarithmic Mean Divisia Index Method) and the energy efficiency index approach. Analysis of companies’ investments in energy technologies is used for explaining changes in energy production. Evidence of significant development towards the more sustainable operation of the PPI was found. Energy consumption per produced unit has decreased, i.e., energy efficiency has improved. Fossil fuels have been partially replaced with bio-based alternatives. Thus, the CO2 intensity has decreased substantially. The generation of renewable electricity has increased in both countries. Examples of Finland and Sweden indicate that the PPI has great potential to contribute to CO2 emission reduction worldwide in the future as energy efficiency can be further improved, and the share of fossil fuels can be decreased increasing the use of biofuels and self-generated green electricity at least in kraft pulp mills.

A wide variety of biomass is available all around the world. Most of the biomass exists as a by-product from manufacturing industries. Pulp and paper mills contribute to a higher amount of these biomasses mostly discarded in the landfills creating an environmental burden. Biomasses from other sources have been used to produce different kinds and grades of biomaterials such as those used in industrial and medical applications. The present review aims to investigate the availability of biomass from pulp and paper mills and show sustainable routes for the production of high value-added biomaterials. The study reveals that using conventional and integrated biorefinery technology the ample variety and quantity of waste generated from pulp and paper mills can be converted into wealth. As per the findings of the current review, it is shown that high-performance carbon fiber and bioplastic can be manufactured from black liquor of pulping waste; the cellulosic waste from sawdust and sludge can be utilized for the synthesis of CNC and regenerated fibers such as viscose rayon and acetate; the mineral-based pulping wastes and fly ash can be used for manufacturing of different kinds of biocomposites. The different biomaterials obtained from the pulp and paper mill biomass can be used for versatile applications including conventional, high performance, and smart materials. Through customization and optimization of the conversion techniques and product manufacturing schemes, a variety of engineering materials can be obtained from pulp and paper mill wastes realizing the current global waste to wealth developmental approach.

Waste-to-energy or value-added products have been increasingly considered in many pulp and paper mills (PPMs) worldwide. However, developing appropriate conversion technologies is a major challenge in transforming PPMs wastes into biofuels or value-added biomaterials. In the present study, a long-term (320 d) anaerobic digestion of primary sludge of a thermomechanical pulp mill (TMP) was carried out for the first time in a thermophilic anaerobic membrane bioreactor (ThAnMBR). Effect of organic loading rate (OLR) in the range of 2.5–6.8 kg-COD/m3 d and hydraulic retention times (HRT) of 3–8 d on the process performance was investigated. Under various OLRs, stable biogas productions were obtained, and the best results were achieved with lower OLR (2.5 kg-COD/m3 d) and higher HRT (8 d), at biogas yields of 189 L biogas/kg MLSS fed. However, it was found that biogas production and sludge biomass degradation decrease when the organic loading rate increases. The proportion of sludge reduction ranged from 28.9 to 46.7% depending on the applied OLRs. Despite varying OLRs, stable membrane performance was obtained, where the required membrane flux was easily maintained during the reactor operation. In this study, also the properties of digestate and membrane permeates were studied under different operating conditions, and they fluctuated to some extent with OLR. ThAnMBR is a promising new technology for pulp and paper mill primary sludge treatment.

The textile industry is resource-intensive, which has a significant impact on global emissions and waste pollution. To meet the demand of textiles over a third of fibres used in manufacturing are sourced from fossil fuels. As the global demand for textiles continues to grow, manufacturers are having to seek innovative approaches to providing sustainable and regenerative cellulose fibres. However, the latest climate change pressures on the textile industry have uncovered grave environmental issues associated with traditional regenerative cellulose production, such as the viscose manufacturing process. The viscose process requires intensive use of hazardous chemicals which leads to water pollution and ecotoxicity. In addition, if forestry products are unsustainably sourced for this process, this can lead to resource scarcity and deforestation. To provide a holistic solution for mitigating these challenges this study uses the by-products of paper manufacturing dissolved in an ionic liquid to produce regenerated cellulose filaments. Paper mill sludge (PMS) is a cellulosic by-product typically used on animal bedding and land spreading. The material has been dissolved in an ionic liquid - 1-ethyl-3-methylimidazolium diethyl phosphate - with the aid of a co-solvent dimethyl sulfoxide (DMSO) - and spun into continuous filaments for textile production. The mechanical properties of paper sludge filaments are found to be competitive with commercial viscose, which is promising for their drop-in replacement. It is also demonstrated that by increasing the concentration of the PMS from 9% to 12.4%, an improvement of the filament properties can be achieved; an increase in modulus from ∼19 GPa to ∼26 GPa and strength from ∼223 MPa to ∼282 MPa. These values are shown to be competitive with other commercial, less sustainable, regenerated cellulose fibres.

Unprinting of paper can reduce multiple life-cycle stages in the recycling of paper to yield significant environmental impact. Laser-unprinting has been demonstrated for uncoated paper but causes significant damage to coated paper. This work explores a scalable optical (non-laser) process for unprinting coated paper. Printed coated paper is exposed to pulsed broad-spectrum Intense Pulsed Light (IPL) from a xenon lamp and the toner is then removed by dabbing gently with an ethanol wipe. While black toner is easily unprinted, unprinting of colored prints (red, blue, green) is best realized by incorporating an initial overprint of black toner. An unprinting throughput on the order of mm2/s is achieved. Three distinct regimes of unprinting are identified based on the extent of toner removal and damage of the paper. The optical properties of the unprinted paper, characterized via UV–Visible spectrophotometry, are correlated to these regimes to understand the potential for in-situ optical process monitoring. Scanning Electron Micrography and Fourier-Transform Infrared Spectroscopy are performed to understand the underlying mechanisms that govern the occurrence of the different unprinting regimes. Further, the potential impact of the developed approach on recycling of paper is discussed in the context of the capabilities of current optical unprinting approaches and the potential elimination of life-cycle stages in conventional paper recycling.

We have studied the surface structure of tamper-proof paper with positive and negative watermarks at different scales ‒ from a micrometer to a nanometer level, by using the methods of contact profilometry and atomic force microscopy. Experimental research has confirmed that the structural parameters of the tamper-proof paper's surface differ at regions with and without watermarks. The results of measurements by a contact profilometer have made it possible to trace a correlation between values of the profile's mean arithmetic deviation and the presence of watermarks. It was determined that the value for the profile's largest height does not depend on a measurement region, which could be related to the chaotic arrangement of fibers and particles of the filler in the paper bulk that protrude above the profile's line. By analyzing the value of the profile's mean arithmetic deviation obtained by using a method of atomic-force microscopy, it was found that for regions with negative watermarks it is larger than that for regions with positive watermarks. The dependence of the profile's largest height on measurement region is not clearly observed. This may be due to that the size of the examined region (3,000×3,000 nm) covers only part of the pulp fibers. Thus, the results of our analysis allow us to argue that both methods are suitable for estimating the characteristics of paper's surface, and determine the character of interaction between a given type of paper and printing inks during printing process. In particular, it has been established that the method of profilometry makes it possible to determine parameters of the paper's surface profile, formed in a certain way, while the atomic force microscopy method allows analysis of the morphology of its components, located at the surface (fibers, filler's particles, etc.). The availability of information on the structural properties of paper makes it possible to predict the quality of printing reproduction, specifically clearness of reproduction of thin guilloche lines on watermarks, which is relevant because it prevents flaws in printing products for special purposes.

Pulp and paper industry is one of the high priority sectors that generates large amount of solid (sludge) and liquid (paper mill effluent) wastes. Making use of this huge quantity of paper mill sludge (PMS) in an environment friendly manner is challenging and cost involving. Similarly the present wastewater treatment strategies based on physical and chemical methods encounter certain serious setbacks including secondary pollution generation with expensive mode of abatement processes. The present study aims at a “waste treats waste” strategy for the bioremediation of paper mill effluent in fluidized bed reactor (FBR) using another waste of the same industry, PMS as immobilizing matrix for Planococcus sp. TRC1, a wastewater bacterial isolate. This study simultaneously explores this isolate for the yellowish orange pigment it produces (2.3 ± 0.2 mg/gm of dry bacterial biomass) and characterizes it as a member of the pharmacologically important carotenoid pigment family via UV-Vis spectrophotometry, TLC, FT-IR and 13C NMR. The antioxidant potential of this pigment was studied by DPPH assay (IC50 = 33 ± 0.4 μg/ml) and H2O2 assay (IC50 = 147.4 ± 2.2 μg/ml). In FBR, the PMS immobilized bacteria showed removal of phenol, lignin, colour and COD from the effluent by 96%, 74%, 81% and 85% respectively after 60hr of treatment. The experimental data on immobilization fitted well with pseudo second-order (R2 = 0.955) and Freundlich adsorption isotherm (R2 = 0.996) models. The alterations in PMS before and after bacterial immobilization, as revealed by SEM and FT-IR, depicted the success of PMS as immobilization matrix. Phytotoxicity (90% seed germination) and mutagenicity studies confirmed that the treated effluent was substantially less toxic than its raw state. This study highlights a novel utilization possibility of PMS in an eco-friendly and economic way as immobilization matrix for Planococcus sp.TRC1 for paper pulp mill effluent treatment along with production of carotenoid pigment from this potential bacterial isolate as value added product.

Ample interest for more efficient utilization of bio-based residues has emerged in the Nordic pulp and paper (P&P) industry, which uses virgin wood as feedstock. Although different bioenergy retrofit technologies for production of liquid, solid, and gaseous bioenergy products have been applied in the existing P&P mills, the number of installations remains small. The lack of profound knowledge of existing bioenergy retrofits hinders the replication and market uptake of potential technologies. This review synthesises the existing knowledge of European installations and identifies the key drivers and barriers for implementation to foster the market uptake of potential technologies. The bioenergy retrofits were reviewed in terms of technical maturity, drivers, barriers and market potential. Based on this evaluation, common drivers and barriers towards wider market uptake were outlined from political, economic, social, technical, environmental, and legal perspective. Technologies already commercially applied include anaerobic fermentation of sludge, bark gasification, tall oil diesel and bioethanol production, whereas lignin extraction, biomethanol production, hydrothermal liquefaction and hydrothermal carbonization are being demonstrated or first applications are under construction. The findings of this review show that a stable flow of residues at P&P mills creates a solid base for retrofitting. New innovative bio-based products would allow widening the companies' product portfolios and creating new businesses. Also, European Union's (EU) legislation drives towards advanced biofuels production. Wider uptake of the retrofitting technologies requires overcoming the barriers related to uncertainty of economic feasibility and unestablished markets for new products rather than technical immaturity.

To evaluate the effect of brown-rot fungi Oligoporus placenta and earthworm Eisenia fetida on decomposition of paper mill sludge, the paper mill sludge was mixed with cow dung in 0, 25, 50, 75, and 100% proportions and changes in physicochemical quality of waste mixtures was carried out for 28 days. All waste mixtures were treated with: Setup-I (E. fetida), Setup-II (O. placenta) and, Setup-III (E. fetida + O. placenta). A decrease in total organic carbon, C/N ratio and cellulose but an increase in total kjeldhal nitrogen, total phosphorus, total potassium and pH was recorded. The paper mill sludge in 50–75% proportion in feedstock showed the better results and rate of mineralisation were in order: Setup-III > Setup-I > Setup-II. The proportion of CD has direct role in waste mineralisation. The microbial population (bacterial, fungal and actinomycetes) and earthworm biomass were also high in Setup-III, suggesting the influence of brown-rot fungi on paper mill sludge humification. Results indicate that fungal inoculate in vermicomposting was effective in decomposing cellulose-rich industrial sludge.

In recent years, the use of microalgae as feedstock for many marketable products, such as animal/aqua feeds, bioplastics and fertilizers, has gained renewed interest due to their fast growth potential coupled with relatively high lipid, carbohydrate and nutrient content. An algal biorefinery at an industrial site has the potential to sustainably and profitably convert carbon dioxide emissions into microalgal biomass and concomitantly reduce nitrogen and phosphorus from wastewaters. Industrial wastewaters are a potential alternative to traditional media used for large-scale microalgal cultivation. Pulp and paper mills are major consumers of water resources and discharge a huge amount of water to nearby lakes or rivers. This study investigated whether pulp and paper mill waste water is suitable for microalgal cultivation with the aim of achieving significant biomass production. Six different process waters from one Canadian pulp and paper mill were tested with two freshwater green microalgae. All of these waters were unable to support growth of microalgae due to inadequate nutrient concentrations, colour, turbidity and possible toxicity issues. HIGHLIGHTS Two freshwater microalgae strains were screened for potential growth on pulp and paper effluents.; Pulp and paper wastewater effluents were unable to support growth of the microalgae.; Chemical residues from the pulping process, such as peroxide and tannin, may inhibit algal growth.

© 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.The present paper reports the pyrolysis behavior, kinetic, and thermodynamic parameters of paper mill sludge (PMS), which is a paper manufacturing residue and cannot be re-evaluated, at three heating rates (5, 10, and 20 °C min−1) under non-isothermal conditions. Ultimate and proximate analyses of the paper mill sludge were carried out. Kinetic and thermodynamic parameters were calculated using four model-free methods; Flynn-Wall Ozawa (FWO), Friedman, Kissinger-Akahira-Sunose (KAS), and distributed activation energy model (DAEM). High R2 values revealed that all models are compatible with TGA data. The activation energy calculated (101.01 kJ mol−1) from FWO was higher than the other three methods. Pre-exponential factor values ranged from 0.56 × 103 and 14.55 × 103 s−1 for all methods. Kinetic and thermodynamic findings will be beneficial in terms of the process design of PMS pyrolysis. Graphical abstract: [Figure not available: see fulltext.]

Microbial fuel cell is a promising technology to harvest energy from wastewater, and effective anode catalysts are essential for its applications. In this study, zero-dimension nitrogen-doped carbon dots, as biocompatible efficient modifiers, were synthesized and decorated onto the carbon paper surface to prepare microbial fuel cell anode. The as-fabricated nitrogen-doped carbon dots decorated carbon paper anode was able to enhance electricity generation and efficient wastewater treatment. It was found that the as-fabricated electrode had a high hydrophilicity, which was favorable for the microbial immobilization. Compared with the carbon paper anode, the biofilm on the as-prepared anode was almost twice of thickness. After introducing nitrogen-doped carbon dots, the extracellular electron transfer process from the microorganisms to the anode was enhanced. The microbial fuel cell with the as-developed anode generated a remarkable power output of 0.32 mW, 1.1 times higher than that of the raw carbon paper anode with same measurement area. Moreover, 16 sRNA pyrosequencing analysis shows that the quantity of Pseudomonas on the electrode increased by ∼40%, which also promoted the electron transfer rate by excreting mediators like phenazines or phenazine derivatives. This work developed a new approach to design microbial fuel cell anode material and fabricate a high-efficiency and environmentally friendly anode for electricity generation from wastewater.

This study estimates efficiency in energy utilization at firm level and feasible energy saving target of the pulp and paper industry in India. For this analysis, data is extracted from prowess database for a panel of 67 major pulp and paper producing firms over the period of 2003–04 to 2013–14. We employed radial and non-radial variants of data envelopment analysis to assess the feasible energy saving target with the current level of output. Particularly, we employed slack-based method with variable returns to scale as a flexible and pragmatic approach to performance analysis. Results reveal no significant improvement in the energy efficiency level of the firms over the study period and show vast energy saving potential. Results of slack-based measure of energy efficiency show the feasible energy saving potential of 40%. Further, size of the firm, age and financial performance are important factors that influence energy efficiency. Therefore, this study recommends special attention to the paper industry while implementing energy efficiency programme. We also reviewed four major policies for industrial energy efficiency improvement initiated by Bureau of Energy Efficiency, India.

Small companies encounter difficulties to adapt to new markets with a sustainable perspective. The subject of this article is a paper transformation company which has been eager to develop the organic farming market by developing a new plant support. Alternatives made from plant fibres or plastics exist, such as jute and polypropylene. The main difficulty of this project was to ecodesign a paper product with a multicriteria approach. The factors considered have been divided into two categories. Firstly, the environmental impacts calculated according to the Life Cycle Assessment methodology (on raw material extraction, manufacturing and end-of-life) are summarised. Secondly, the characteristics of the product are discussed in regards to these results and sustainability questions as part of the interpretation phase. Finally, ways of improvement of the LCA methodology to improve the study in terms of geographical representativeness and societal considerations are discussed.

Transformer insulation paper is a key indicator for transformer remaining operational life. Paper decomposition is evaluated using the degree of polymerization (DP) which calls for samples of insulation paper from operating transformers. Since collecting such paper samples is extremely difficult, other indicators have been used to indirectly reveal the DP value of insulation paper. This includes dissolved gases in transformer oil such as carbon oxides and hydrocarbon gases, furan compounds, methanol, ethanol, and moisture along with some oil characteristics such as interfacial tension. However, for the same oil sample, these individual parameters lead to different DP values. This is attributed to the lack of accuracy of the established mathematical and artificial intelligence models correlating DP with each of the above mentioned individual parameters. This paper presents a self-learning method to estimate the DP value of transformer insulation paper based on multiple transformer oil aging parameters. The proposed method comprises data processing, fuzzy c-means and linear regression. Results reveal that estimating the DP value based on multiple aging parameters is more accurate than estimating it using one single parameter as per the current practice. The proposed method not only helps to understand the correlation between multiple oil aging parameters and the DP value of paper insulation, but also promotes the establishment of more accurate life assessment models for power transformers based on these oil aging parameters.

Using waste paper as fuel for domestic heating is a beneficial recycling option for small island developing states where there are lacks of resources for energy and waste treatment. However, there are concerns about the impact of air pollutants emitted from the burning of the self-made paper briquettes as household air pollution is recognised as the greatest environmental risk for human. In this study, combustion tests were carried out for paper briquettes made in one Pacific island and three commercial fuels in Australia including wood briquettes, kindling firewood and coal briquettes in order to: 1) characterise the emissions of three criteria air pollutants including particulate matters, CO and NOx including their emission factors (EF) from the tested fuels; and 2) compare the EFs among the tested fuels and with others reported in the literature. The results showed that waste paper briquettes burned quickly and generated high temperature but the heat value is relatively low. Paper briquettes and coal briquettes produced higher CO concentration than the others while paper briquettes generated the highest NOx level. Only PM2.5 concentration emitted from paper briquettes was similar to kindling firewood and lower than wood briquettes. Burning of paper briquettes and wood briquettes produced particulate matter with large average count median diameter (72 and 68 nm) than coal briquette and kindling firewood (45 and 51 nm). The EFs for CO, NOx and PM2.5 of paper briquettes were within the range of EFs reported in this study as well as in the literature. Overall, the results suggested that using paper briquettes as fuel for domestic heating will not likely to generate higher level of three major air pollutants compared to other traditional fuels.

Anaerobic treatment of sedimented fibers collected from bottom of a bay that had been receiving pulp and paper mill wastewater for about 70 years were studied for the first time in semi-continuously fed continuously stirred tank reactors (CSTR). Anaerobic treatment of the fiber sediment was shown to be feasible, without dilution and with nitrogen and buffer supplement, at organic loading rates (OLR) up to 2.5 kg VS/m3d and hydraulic retention times (HRT) of 60 d resulting in methane yields of 201 ± 18 L CH4/kg VS. Co-digestion of sedimented fiber with sewage sludge at an OLR of 1.5 kg VS/m3d and HRT of 20 d resulted in a methane production of 246 ± 10 L CH4/kg VS. The techno-economic feasibility of mono and co-digestion process together with several case dependent factors such as maximum operable OLR, digestate utilization needs to be evaluated before making further conclusions for larger scale remediation applications. acceptedVersion

The pulp and paper (P&P) sector is a dynamic manufacturing industry and plays an essential role in the Austrian economy. However, the sector, which consumes about 20 TWh of final energy, is responsible for 7% of Austria’s industrial CO2 emissions. This study, intending to assess the potential for improving energy efficiency and reducing emissions in the Austrian context in the P&P sector, uses a bottom-up approach model. The model is applied to analyze the energy consumption (heat and electricity) and CO2 emissions in the main processes, related to the P&P production from virgin or recycled fibers. Afterward, technological options to reduce energy consumption and fossil CO2 emissions for P&P production are investigated, and various low-carbon technologies are applied to the model. For each of the selected technologies, the potential of emission reduction and energy savings up to 2050 is estimated. Finally, a series of low-carbon technology-based scenarios are developed and evaluated. These scenarios’ content is based on the improvement potential associated with the various processes of different paper grades. The results reveal that the investigated technologies applied in the production process (chemical pulping and paper drying) have a minor impact on CO2 emission reduction (maximum 10% due to applying an impulse dryer). In contrast, steam supply electrification, by replacing fossil fuel boilers with direct heat supply (such as commercial electric boilers or heat pumps), enables reducing emissions by up to 75%. This means that the goal of 100% CO2 emission reduction by 2050 cannot be reached with one method alone. Consequently, a combination of technologies, particularly with the electrification of the steam supply, along with the use of carbon-free electricity generated by renewable energy, appears to be essential.

A new process for the production of bioethanol from paper mill sludge (PMS) is described in this work. PMS biomass feedstock was processed via the simultaneous saccharification and fermentation (SSF) with and without accelerants. The enzymatic hydrolysis and fermentation were first evaluated, and the energy demand was 2.2 MJ/L of produced ethanol. When the enzymatic hydrolysis and fermentation were combined, the energy demand was reduced to 1.0 MJ/L ethanol, the sugars production increased, and the overall capital cost of the process decreased. The sugar yield was improved by adding accelerant and selecting the optimal fiber recovery method. The accelerant improved the enzymatic hydrolysis via a pathing/bridging mechanism. The SSF with the chemical fiber recovery method coupled with accelerant addition would be the best process configuration. Upon this combination, the glucose profile was enhanced from 9.8 g/L to 17.0 g/L. The sludge fiber conversion by SSF was improved by selecting an efficient fiber recovery method combined with the accelerant addition. SSF in chemical fiber recovery with accelerant addition was the best process by a 10% improvement of ethanol yield. The proposed process configuration offers a lower cost and sustainable process and contributes to the circular economy of zero waste discharges.

The main aim of the study was to assess the environmental performance, through the application of the life cycle assessment, of a recycled paper production process focusing on the energy aspect. The production process occurred in a paper mill that produces packaging paper using paper and cardboard from source separation of municipal solid waste as raw materials. Two scenarios (S1 and S2) were defined by their energy supply sources. A cogeneration (CHP) system using natural gas for the combined production of thermal and electric energy was the source in S1. The Italian electricity grid (using the Italian country mix) and a natural gas boiler were the separate sources for electric and thermal energy, respectively, in S2. Finally, in order to evaluate the environmental effects on the results of the study about the variation in the natural gas supply source, four alternative Italian import mixes (M1, M2, M3, and M4) were defined by varying the contribution of the supplier countries. The environmental impacts were evaluated with ReCiPe 2016 (H) using both midpoint and endpoint approaches. The results showed that for both the scenarios, the energy consumption was the main cause of impacts mainly because of the natural gas contribution. The presence of the cogeneration (CHP) system generated significant environmental benefits compared with the use of energy provided by more conventional sources. The production and use of chemicals as well as the disposal of waste produced during the paper production were other environmental hotspots. The variation in the composition of the Italian import mix of natural gas, in terms of the supplier country’s contribution, had a significant influence on the results. The import of natural gas from Russia was the most impactful option. Since Russia is the country that contributes to the Italian import mix the most, in the next years, the use of natural gas in Italy could become increasingly impactful. Therefore, the replacement of natural gas with renewable sources is an urgent priority.

PurposeThis position paper urges a drive towards clarity in the key definitions, terminologies and habits of speech associated with digital engineering and building information modelling (BIM). The ultimate goal of the paper is to facilitate the move towards arriving at an ideal definition for both concepts.Design/methodology/approachThis paper takes the “explanation building” review approach in providing prescriptive guidelines to researchers and industry practitioners. The aim of the review is to draw upon existing studies to identify, describe and find application of principles in a real-world context.FindingsThe paper highlights the definitional challenges surrounding digital engineering and BIM in Australia, to evoke a debate on BIM and digital engineering boundaries, how and why these two concepts may be linked, and how they relate to emerging concepts.Originality/valueThis is the first scholarly attempt to clarify the definition of digital engineering and address the confusion between the concepts of BIM and digital engineering.

This study develops a framework of internal and external factors that influence the adoption of eco-innovation. We studied 80 adoption processes in the Dutch brewing industry and the Dutch paper industry and analysed the relative importance of different factors. We find that internal factors were more important than external factors. The analysis also shows differences between the industries. The financial advantage was important for both industries, but especially for the paper industry. For the brewing industry, ethical responsibility and stakeholders played a more important role in the adoption. The analysis also revealed differences for small and large firms. Ethical responsibility and stakeholders are relatively more often mentioned by small firms, whereas clear objectives and regulations were mentioned more by large firms. Our study highlights that the adoption of eco-innovation is a complex process and the position in the supply chain as well as the size of a firm influence what is important in the adoption of eco-innovation.

In remote areas, such as India, Africa and Southeast Asia, typically not connected to the natural gas distribution network, tissue paper production is currently carried out using a Yankee cylinder and two hot air hoods heated with saturated steam produced in conventional boilers. In this way the drying air is heated at medium temperature, around 160-180 °C, with consequent low levels of dried paper production. In this context, the present study intends to evaluate the technical and economic feasibility of using a wood biomass fixed bed downdraft gasification plant for the production of syngas to be used as fuel in gas hoods, in order to reach high drying temperatures (around 500 °C), comparable with those of the current modern hoods powered with natural gas. Using previously developed calculation codes, an evaluation of energy performance of the paper drying system and of the gasification plant has been performed. The present study also evaluates the possibility of applying a CHP plant, powered by biomass, for the production of steam and electric, this last obtained adopting a steam turbine, thus covering all the electrical and thermal needs of the paper mill. Results show that, for a paper mill with a production of about 80 t/day of paper, two gasification reactors with a thermal output of about 1.95 MWt, and a consumption of dry biomass of 0.86 t/h, are required. For the steam system, the net electric power needed to meet the needs of the paper mill is about 3100 kW with a consumption of 4.72 t/h of moist biomass and a net efficiency of 23.9 %.

The need to view innovation policy through the lens of policy mixes has gained momentum given the growing complexity, the dynamics of real-world policy and the wide array of difficulties to address the current great societal challenges, notably the increasing pressure on the ecosystems that support our society. One of the main challenges concerning the transition towards bioeconomy, is to gain a more in-depth understanding on the policy mix to stimulate innovation in sustainability transitions. Our paper aims at enriching the portfolio of empirical case studies on policy mixes for innovation and sustainable transitions, by investigating the development of the policy mix underpinning the sustainability transition of the pulp and paper industry in Sweden. We apply a case study approach which draws on event history analysis, semi-structured interviews with industry and policy makers, literature reviews, a participative workshop with stakeholders from the pulp and paper industry, as well as on the IEA databases on climate change and energy efficiency policies and measures. Our analysis emphasises coordination, timing and scale in policy mixes as important elements to understand how instruments interact to accelerate sustainability transitions. The mapping of the policy mix shows that destabilising policies were crucial for accelerating the transition process of the industry. Prior to novelty creation policies, destabilising policies (e.g. environmental policies) were needed for 'innovation policy instruments' to be effective. More specific instruments (e.g. carbon tax), targeting particular functions of the innovation systems, require 'on-the-ground' policy intelligence and benefit from close interaction with industry.

The activated sludge process within the pulp and paper industry is generally run to minimize the production of waste activated sludge (WAS), leading to high electricity costs from aeration and relatively large basin volumes. In this study, a pilot-scale activated sludge process was run to evaluate the concept of treating the wastewater at high rate with a low sludge age. Two 150 L containers were used, one for aeration and one for sedimentation and sludge return. The hydraulic retention time was decreased from 24 hours to 7 hours, and the sludge age was lowered from 12 days to 2–4 days. The methane potential of the WAS was evaluated using batch tests, as well as continuous anaerobic digestion (AD) in 4 L reactors in mesophilic and thermophilic conditions. Wastewater treatment capacity was increased almost four-fold at maintained degradation efficiency. The lower sludge age greatly improved the methane potential of the WAS in batch tests, reaching 170 NmL CH4/g VS at a sludge age of 2 days. In addition, the continuous AD showed a higher methane production at thermophilic conditions. Thus, the combination of high-rate wastewater treatment and AD of WAS is a promising option for the pulp and paper industry. Funding agencies: Swedish Energy Agency [32802-2]; Scan-dinavian Biogas Fuels AB; Poyry AB; BillerudKorsnas AB; SCA; Fiskeby Board AB; Purac AB

Activating flux is made up of inorganic material mixed with a volatile medium. The objective of this study is to identify and review the literature in activating flux, and different type of welding techniques. For that purpose, a structured review method is adopted and the Scopus database is used as a primary source for the selection of papers. The papers were identified using the string term of “Activating flux” OR “Activated flux” in the title of papers. And a total of 238 papers were identified for the study. Besides the above few other papers were also reviewed and the materials used, the type of flux used, and the findings of different combinations were highlighted in the form of tables. The findings of the study provide a comprehensive understanding of the different type of welding techniques focusing on TIG welding, and the different combination of flux used and their impact was summarized.

The increasing pressure on natural resources and the climate has been noted by businesses and governments worldwide, who now face the difficult task of integrating paths of environmental sustainability and economic growth. One promising approach to sustainable development, reducing the pressure on natural resources and solving waste problems is circular economy. From different ways of implementing circular economy, this study focuses on the productization of industrial side streams, which carry a great deal of underutilized potential. In this article, the productization of pulp and paper industry side stream, fiber sludge, for commercial use as a dust-binding agent is studied via a descriptive, in-depth case study. Apart from inconsistent quality, fluctuating supply, cost of storage and logistics, what makes industrial side stream utilization challenging is the lack of knowledge that stakeholders have about side streams and their utilization and the lack of new value chain development for their commercial use. Therefore, it is essential for all parties involved to have a clearer vision of what is being sold for what purposes, through productization. This study found that the productization of side streams follows the same steps as the productization of any other traditional product, and the productized side streams can be added to the company&rsquo, s product portfolio as by-products.

Due to the increasing use of intermittent renewable generation, the power grid requires more flexible resources to balance supply and demand of electricity. Steam systems with turbine-generators, which are widely used in industries, can be operated flexibly to support the power grid. Yet, the available amount of flexibility of industrial steam systems is still not clearly quantified. This study presents the method to quantify electricity generation flexibility of a typical industrial steam system with a steam turbine-generator and process heat demands. The proposed method is introduced based on a real case of an integrated pulp and paper mill in Austria. An integrated mathematical model representing the combined electricity and steam system is developed to simulate the behaviour of the on-site energy system to quantify the potential flexibility provision. Flexibility is represented as the maximum upward and downward changes in the imported electricity from the public power grid. The results demonstrate that it is possible to aggregate the flexibility of the industrial facility as a lookup table. Also, the results reflect key factors that limit the flexibility at different operating points of the turbine-generator.

With the surging energy price and environmental concerns, measures to improve energy efficiency have attracted increasing concerns of the manufacture sector, especially energy-intensive manufacturing industries such as tissue paper mills. Energy-efficiency scheduling, as a novel energy-efficient method, has attracted the attention of an increasing number of researchers in recent years. Drying process is the most energy-intensive production process in tissue paper mills, which has a great energy-saving potential. This paper aims to reduce the energy costs for the tissue paper mill, consisting of processing energy cost and set-up energy cost, through integrating drying process optimization with energy-efficient scheduling. First, the energy cost model and the scheduling model were built. Then, the energy cost of the drying process of every job in a given scheduling problem was optimized using particle swarm optimization (PSO). Afterwards, the energy cost was further optimized using energy-efficiency scheduling. In addition, a hybrid non-dominated sorting genetic algorithm II (NSGA-II) was utilized to solve the energy-efficiency scheduling problem. Finally, several real scheduling problems from a real tissue paper mill were addressed using the proposed approach to demonstrate its effectiveness in energy saving. The experiment result showed that there is a great energy-saving potential in the drying process, accounting for up to 12.53% of the total energy consumption. Moreover, the maximum energy saving ratio of the proposed approach could reach 9.03%. On the whole, the proposed approach can provide a new energy-saving method for tissue paper mills or other manufacturing industries.

The paper and cellulose manufacturing industry generates significant quantities of waste, including an extremely humid sludge, which is considered to be an effluent with high environmental liability for the manufacturer. Studies have shown that this waste sludge may be utilized in construction material, such as mortar for fixing blocks, as well as for ceiling and wall coatings that use ceramic masonry as a sealant. The recycling of pulp and paper industry waste sludge has important environmental benefits, by preventing soil and water pollution caused by inadequate disposal and by reducing the depletion of natural resources, such as lime, used in cementitious materials. This study analyzed the sustainability of incorporating such waste into cement-based mortars. Tests were conducted replacing lime, one of the most expensive mortar components with high environmental impact, with waste sludge in contents of 5%, 10%, 15%, and 20%. Analysis was then performed on the samples to assess the primary technical characteristics of these incorporated mortars, such as the consistency index, heat of hydration, content of incorporated air, water retention, mechanical strength and the capillarity coefficient. The results were compared with the results of the characterization tests that were performed on the waste material. The results showed that for use in wall and ceiling mortar coatings, the level of incorporation should not exceed 10%, because higher levels yield lower values of mechanical strength resistance, incompatible with market requirements. This result is probably due to the low heat of hydration of the waste material which generates slower reactions. On the other hand, higher levels of waste material content, above 10%, are appropriate convenient for mortar used to fill small repairs in masonry that do not require control of properties.

Color removal from pulp and paper mill wastewater by using fly ash was one of the effective and low-cost methodologies to improve the quality of the wastewater. The fly ash had the capability to remove various organic pollutants, such as Lignin, Tannins, Humic, and Fulvic, from wastewater. These organic pollutants contribute to the color intensity of industrial effluent. The research examined the removal capability of fly ash including Bagasse fly ash, Rice husk ash and Lignite fly ash. The samplings were analyzed in the laboratory for color removal capability. The test was divided into 3 steps as follows: Step 1 the comparison of color removal efficiency by using 3 types of fly ashes; Bagasse fly ash, Lignite fly ash and Rice Husk ash. Step 2: Analyzing the functional group of fly ashes before and after color removal by using the Fourier Transform Infrared Spectroscopy (FT-IR) to determine the adsorption mechanism and other influencing factors. Step 3: Color removal efficiency by sand filter experiment. The results showed that; Step 1: Bagasse fly ash, Rice husk ash and Lignite fly ash were effective in color removal of 94.2, 74.8 and 71.8 percent at 30 minutes, 24 hours and 4 days, respectively. The pH of the effluent using Bagasse fly ash was constant to 7.5 - 8 and tend to be constant although the ash amount increased, while the pH of Lignite fly ash was in the range of 8 - 9 and tend to increase when amount increased. Step 2: Analyzing the functional group of Bagasse fly ash using the FT-IR found that after using Bagasse fly ash for color removal in the effluent, the graph tends to decrease. Step 3: The result showed that the efficiency of color removal of the sand filter by soil mixed with Bagasse fly ash at ratio 1: 0 - 1:10 (Soil : Bagasse fly ash), which the efficiency of color removal tends to increase with the maximum of 93 % and the minimum of 16% at ratio 1:7 and 1:0, respectively.

This work was partially funded by H2020-ICT-2014-1, RIA, ERC-CoG-2014, and FEDER funds through the COMPETE 2020 Program and National Funds through FCT -Portuguese Foundation for Science and Technology under the project UID/CTM/50025/2019. Large-area paper batteries have been explored in this paper, correlating electrode materials and screen printing with the electrochemical performances. The use of office paper embedded in salt solution with two electrodes performed by an easy and large-scale application technique opens doors to a new concept of energy storage. The proposed device is Li-free and uses zinc and silver powder-based screen printable pastes to deposit the electrodes. Cyclic voltammetry and charge-discharge curves reveal the performance of the produced devices using NaCl and KOH solutions in different concentrations. The simulation of electrochemical impedance spectroscopy measurements gave clue of a similar working mechanism to conventional Li-ion batteries. After charging, a single paper battery achieves 1.83 V with 60 mA/cm2 and 90.6% charge-discharge efficiency. As a proof of concept, a small paper battery and a set integrated in series and parallel were used to power a commercial red light-emitting diode. publishersversion published

The amount of Paper Board Mill Effluent Treatment Plant Sludge (PBM-ETPS) dumped from paper mills are huge and its conversion into hydrochar for the purpose of energy has broad prospects. This study investigated the optimum conditions for the production of PBM-ETPS derived hydrochar (PBM-ETPSH) through Reponse Surface Methodology (RSM) for more surface area and pore volume with minimal hydrogen to carbon (H/C) and oxygen to carbon (O/C) ratios. The PBM-ETPSH had higher heating value (HHV) of 18.39 MJ kg−1 with fixed carbon percentage of 15.6. Our results showed a reduction in H/C (35.05%) and O/C (43.7%) ratios confirming the coalification of optimized PBM-ETPSH. Thermogravimetric investigations of blending PBM-ETPSH with coal in 1:1 ratio increased its HHV to 22.25 MJ kg−1 making it suitable as an energy alternative for paper mills.

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area.

Background: In spite of the continuous efforts and investments in the last decades, lignocellulosic ethanol is still not economically competitive with fossil fuels. Optimization is still required in different parts of the process. Namely, the cost effective usage of enzymes has been pursued by different strategies, one of them being recycling. Results: Cellulase recycling was analyzed on Recycled Paper Sludge (RPS) conversion into bioethanol under intensified conditions. Different cocktails were studied regarding thermostability, hydrolysis efficiency, distribution in the multiphasic system and recovery from solid. Celluclast showed inferior stability at higher temperatures (45-55 ºC), nevertheless its performance at moderate temperatures (40ºC) was slightly superior to other cocktails (ACCELLERASE®1500 and Cellic®CTec2). Celluclast distribution in the solid-liquid medium was also more favorable, enabling to recover 88 % of final activity at the end of the process. A Central Composite Design studied the influence of solids concentration and enzyme dosage on RPS conversion by Celluclast. Solids concentration showed a significant positive effect on glucose production, no major limitations being found from utilizing high amounts of solids under the studied conditions. Increasing enzyme loading from 20 to 30 FPU/ gcellulose had no significant effect on sugars production, suggesting that 22 % solids and 20 FPU/gcellulose are the best operational conditions towards an intensified process. Applying these, a system of multiple rounds of hydrolysis with enzyme recycling was implemented, allowing to maintain steady levels of enzyme activity with only 50 % of enzyme on each recycling stage. Additionally, interesting levels of solid conversion (70-81 %) were also achieved, leading to considerable improvements on glucose and ethanol production comparatively with the reports available so far (3.4 and 3.8 fold, respectively). Conclusions: Enzyme recycling viability depends on enzyme distribution between the solid and liquid phases at the end of hydrolysis, as well as enzymes thermostability. Both are critical features to be observed for a judicious choice of enzyme cocktail. This work demonstrates that enzyme recycling in intensified biomass degradation can be achieved through simple means. The process is possibly much more effective at larger scale, hence novel enzyme formulations favoring this possibility should be developed for industrial usage., This work had the fnancial support of the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/ BIO/04469/2013 unit, COMPETE 2020 (POCI-01-0145-FEDER-006684) and the MultiBiorefnery project (POCI-01-0145-FEDER-016403). Furthermore, FCT equally supported the Ph.D. grant to DG (SFRH/BD/88623/2012)., info:eu-repo/semantics/publishedVersion

This study aims to examine the economic and environmental benefits of recovered paper and potential contribution of the recovered paper to the Kingdom of Saudi Arabia (KSA) Vision 2030. The Vision 2030 is an inclusive development policy, recently launched, with the objectives to build the best future for the country. The Vision 2030 is based on three ambitious goals: making the country a vibrant society, a thriving economy and an ambitious nation. It is estimated that by 2030, 5.05 million ton of waste paper would be recovered in the country. About 11.3 billion SAR (US $3.01 billion) would be added to the country’s GDP and would create about 16,536 new jobs if the recovered paper industry is built in the country. Moreover, a net environmental benefit of 9.6 million crude barrel oil savings and 4.5 million ton of CO2 savings from GHG emissions could be achieved by 2030 only from the paper waste recovery in the country. The potential benefits of paper waste recycling in KSA highlight the needs of effective measures to optimize the economic and environmental opportunities inherited in the waste paper industry. These measures should focus on capitalizing the local waste paper processing industry, restrict the export of raw waste paper materials, and enhance the waste paper collection process and quantity.

Different heating processes were applied to pretreat the pulp and paper mill sludge to enhance the hydrolysis stage. Hot air oven, autoclave, microwave and water bath were used for comparison. Chemical analyses exposed that all the pretreatment methods have shown improvement in solubilisation of organic matter. Among the pretreatments studied, heat transfer through hot air (80 °C for 90 min) mode had the highest impact on sludge solubilisation. There was an increase in cellulose (P = 0.0096), acid soluble (P = 0.0053) and insoluble lignin (P = 0.0012), but decrease in hemicellulose (P = 0.0009) content after pretreatment. The XRD and FT-IR spectroscopic characterisation shows the development of aliphatic, unsaturated and carbonyl carbon functionalities in the pretreated samples at higher severities. FESEM picture also confirms the change in structure after pretreatment. Thus, pretreatments contribute to disruption of the lignocellulosic structure making the cellulose easily accessible to acidogenic microorganisms.

Green Energy efficiency is becoming more important because of the resulting cost reduction and image of green society which helps to enhance competitiveness in a globalized green market. Pulp and paper manufacturing is a large-scale industry which is generally regarded as important for national development. The Pulp and Paper industry consumes approximately 2.5% of total industrial energy consumption in Thailand by 44 factories distributed throughout the country. Therefore, energy efficiency improvement can play a significant role in the industry. Investigations of the cost effectiveness of energy efficiency measures and technologies using bottom-up Conservation Supply Curve (CSC) in the pulp and paper mill process are required. This study examines the concept, methodology, and the usefulness of the energy conservation supply curve, and the potential to create the appropriate energy policies to the Thai Pulp and Paper Industry.

Membrane heat exchangers were used for moisture and heat recovery from a hot and humid natural gas stream in indirect contact with an air stream. A plate membrane module with spiral channels on each side was designed to configure gas and air streams in co-current and counter-current flow. Two types of membranes, a commercial kraft paper, and a laboratory-made thin-film composite membrane, were used as the module core. The thermal efficiency and the water recovery from the humid gas were calculated and compared under different operating conditions. At a unit flow ratio of air/gas, the greatest effectiveness was achieved at a methane flow of 100 cm3/min, but water recovery increased at higher gas flows. For the counterflow configuration, an air/methane flow ratio of 2 was sufficient to achieve the highest total effectiveness and water recovery; however, larger air/gas ratios were beneficial to improve heat and moisture transfer for the co-current configuration. The highest water recovery by the kraft paper and composite membrane was achieved (approximately 15 mgH2O/cm2.h) for the input gas with the highest humidity. The dehumidification performance of kraft paper as a porous and hydrophilic membrane was slightly better than that of the composite membrane containing a dense hydrophilic polymer thin film in most cases. A relatively low heat transfer coefficient was found for the module, which was increased by using higher gas flow rates at higher humidity conditions.

Managing a large fleet of ageing assets has become a technical challenge faced by many electricity utilities in developed countries. Asset managers are increasingly interested in techniques that can help extend the useful lifetime of a transformer. Oil regeneration is one of such techniques. In this paper, oil regeneration experiments were performed on a 6.4/0.4 kV retired distribution transformer to investigate the effect of oil regeneration on improving paper conditions. Oil regeneration was conducted in two stages, with the first stage aimed at ‘cleaning the oil’ and the second stage targeted at ‘cleaning the paper’. Oil samples were collected at regular intervals throughout the process and paper samples were obtained from the transformer before and after each oil regeneration stage. It was found that oil regeneration restores oil parameters, including moisture and acidity, similar to those of new oils at the end of stage 1. Analysis of paper samples indicated a reduction in paper moisture at the end of stage 2 by nearly 40%, while low molecular weight acids (LMA) in paper exhibited a reduction by around 30% on average. It is found that the extended oil regeneration period, i.e., stage 2, is necessary to improve the paper condition and hence to reduce the paper ageing rate.

As a kind of industrial hazardous solid waste, paper mill sludge (PMS) was hard to treated by conventional process because of its high moisture, high organic content and and high environmental risk. The hydrothermal liquefaction (HTL) shows excellent potential for the conversion to a wide variety of organic matter with high water contents including various kinds sludge into fuels or value-added chemicals. In this paper, the liquefaction potential for PMS under different reaction temperatures were investigated, and the products were classified into several main components based on the results of GC-MS. The results showed that the highest yield of bio-oil was 44 % (wt/wt dry PMS without ash) at 340 °C with simply compound composition. And the bio-oil product has above 26 % long chain hydrocarbon and 22 % cycloketones. It has potential for conversion to biomass platform compounds. It can be used as bio-fuel for heat recovery of alkali recovery system of paper mill. So, adjusting different reaction temperatures of HTL, the properties of products can meet the different requirements for platform chemical and/or bio-oil fuel.

In recent years, the pulp and paper industry has changed a lot and products have been constructed in quite different methods using new technologies. It can be due to the emergence of challenges and constraints such as shortage of raw materials, energy consumption (fossil fuels, electric, etc.), management of the resulting pollutants, environmental issues, ongoing legal requirements and cleaner production strategies. In Iran, the pulp and paper industry's technological development is not keeping pace with global growth. Iran's pulp and paper mills supply a small fraction of domestic market. The reasons can be due to old technologies being used in factories, aging machinery, low productivity of production systems and lack of coordination with modern technologies. It leads to low-quality of paper products and willingness to buy local products. The aim of this study is to select the most appropriate technologies in the pulp section, due to high impact of pulp quality on the quality of final paper. Using a 2-filterd fuzzy decision-making, hierarchical structure of research is designed to assess technological alternatives according to the selected criteria. Findings show that after passing through two filters, Kraft method was chosen as the most appropriate method. The Kraft process has still many advantages like the high quality of the produced pulp and self-sufficiency in energy supply. This framework offers an appropriate procedure for identifying and selecting technologies that has not been used in past researches. Using this framework facilitates using a clear procedure for evaluating and selecting technology and prevents future losses for organizations.

Handling and disposal of biosludge has been a persistent problem for many pulp and paper mills primarily because of the material’s high moisture content and poor dewatering and drying characteristics. Most biosludge is landfilled or incinerated, and some is used as a soil amendment. To incinerate biosludge, the mills mix it with primary sludge, mechanically dewater the mixture to 15%–30% solids, and burn it with hog fuel in biomass boilers. For biosludge to burn effectively, however, it must be dewatered or dried to at least 30%–35% solids. A systematic study was conducted to examine the drying characteristics of biosludge collected from pulp and paper mills at various temperatures using a thermogravimetric dryer. The drying behavior of the tested biosludges was similar, adding fillers such as wood fines and biomass boiler fly ash to biosludge up to 30 wt% did not significantly affect the drying rate, higher organic content might make biosludge more difficult to dry, and increasing drying temperature significantly increases the drying rate as expected.

Summary Coronavirus disease (COVID‐19) has spread all across the world. Low‐ and medium‐income countries are more affected economically and socially compared to developed countries due to the lack of a rapid, robust, and affordable testing infrastructure. Furthermore, the high cost of real‐time polymerase chain reaction (PCR) system, sophisticated user‐handling procedure, and high expense of the conventional clinical tests are the root causes of the less accessibility of the testing systems to the users. In this study, a COVID‐19 Point‐of‐Care (POC) ecosystem model is proposed for the low‐ and medium‐income countries (or energy deprived countries) that will facilitate the technological development with locally available fabrication components. In addition, the nontechnological development phases have also been discussed, which encompasses the collaboration among academia, local as well as government bodies, and entrepreneurial ventures. In addition, a hypothetical design of a microfluidic paper‐based analytical (μPADs) POC platform is proposed to detect COVID‐19 analyte using unprocessed patient‐derived saliva, which is a miniaturized form‐factor of conventional real‐time polymerase chain reaction (PCR) technique. The device contains four major reaction zones, which are sample zone, buffer zone, loop‐mediated isothermal amplification (LAMP) Master Mix zone, Ethylenediamine tetraacetic acid (EDTA) zone, and sensor zone. To obtain quicker test results and easier operation, a handheld image acquisition technique is introduced in this study. It is hypothesized that in a remote setting, the proposed design could be used as an initial guideline to develop a POC COVID‐19 testing system, which may be simple, easy‐to‐use, and cost‐effective., A COVID‐19 Point‐of‐Care (POC) model is proposed that will facilitate the technological development with locally available fabrication components. To obtain quicker test results and easier operation, a handheld image acquisition technique is introduced. The proposed design could be used as an initial guideline to develop a POC COVID‐19 system, which may be simple, easy‐to‐use, and cost‐effective.

Wastewater containing kraft lignin (KL) discharged from pulp and paper industries could cause serious environmental contamination. Appropriate effluent treatment is required to reduce the pollution. Investigations on anaerobic bacteria capable of degrading KL are beneficial to both lignin removal and biofuel regeneration from the effluent. In this paper, an anaerobic strain capable of degrading KL was isolated from the sludge of a pulp and paper mill and identified as Dysgonomonas sp. WJDL-Y1 by 16S rRNA analysis. Optimum conditions for KL degradation by strain WJDL-Y1 were obtained at initial pH of 6.8, C:N ratio of 6 and temperature of 33°C, based on statistical analyses by response surface methodology. For a 1.2 g/l KL solution, a COD removal rate of 20.7% concomitant with biomass increase of 17.6% was achieved after 4 days of incubation under the optimum conditions. After the treatment by strain WJDL-Y1, KL was modified and degraded.

Each year the pulp and paper industries generate enormous amounts of effluent treatment sludge. The sludge is made up of various fractions including primary, secondary, deinked, fiber rejects sludge, etc. The goal of this study was to evaluate the fuel properties of the hydrochars produced from various types of paper mill sludges (PMS) at 180 °C, 220 °C, and 260 °C. The hydrochars, as well as the raw feedstocks, were characterized by means of ultimate analysis, proximate analysis, moisture, ash, lignin, sugar, and higher heating value (HHVdaf) measurements. Finally, combustion indices of selected hydrochars were evaluated and compared with bituminous coal. The results showed that HHVdaf of hydrochar produced at 260 °C varied between 11.4 MJ/kg and 31.5 MJ/kg depending on the feedstock. This implies that the fuel application of hydrochar produced from PMS depends on the quality of feedstocks rather than the hydrothermal carbonization (HTC) temperature. The combustion indices also showed that when hydrochars are co-combusted with coal, they have similar combustion indices to that of coal alone. However, based on the energy and ash contents in the produced hydrochars, Primary and Secondary Sludge (PPS2) could be a viable option for co-combustion with coal in an existing coal-fired power plant.

In January 2011, the introduction of high-efficiency cogeneration in Europe radically modified the incentive scheme for combined heat and power (CHP) plants. Since then, the techno-economic feasibility of new cogeneration plants in different areas of application (industry, service, residential, etc.), along with the definition of their optimal operation, have inevitably undergone a radical change. In particular, with reference to the Italian case and according to the most recent ministerial guidelines following the new EU regulation, in the event that cogeneration power plants do not reach an established value in terms of overall efficiency, their operation has to be split into a CHP and a non-CHP portion with incentives proportional to the energy quantities pertaining to the CHP portion only. In the framework of high-efficiency cogeneration, the present study compares different CHP solutions to be coupled with the paper industry that, among all the industrial processes, appears to be the best suited for cogeneration applications. With reference to this particular industrial reality, energy, environmental, and economic performance parameters have been defined, analysed, and compared with the help of GateCycle software. Among the proposed CHP alternatives, results show that gas turbines are the most appropriate technology for paper industry processes.

The continual growth of pulp and paper industry has led to the generation of tremendous volumes of fly ash as byproducts of biomass combustion processes. Commonly, a major part of it is landfilled; however, updated environmental regulations have tended to restrict the landfilling of fly ash due to rising disposal costs and the scarcity of suitable land. The pulp and paper industries are therefore urgently seeking energy-efficient mechanisms and management for the beneficial use of fly ash in an ecological and economical manner. This paper offers a comprehensive review of existing knowledge on the major physicochemical and toxicological properties of pulp and paper mill fly ash to assess its suitability for various bound and unbound applications. The current state of various methods used for the valorization of pulp and paper mill fly ash into more sustainable geomaterials is briefly discussed. This paper also presents promising and innovative applications for pulp and paper mill fly ash, with particular reference to agriculture and forestry, the construction and geotechnical industries, and the immobilization of contaminants. It was identified from a literature review that modified pulp and paper mill fly ash can be environmentally and economically advantageous over commercial coal-based fly ash in various sustainable applications.

Due to increased use of variable renewable energy sources, more capacity for reserves is required. Non-generating resources such as large industrial consumers can arbitrage energy prices and provide reserve capacity by exploiting the inherent flexibility in selected industrial processes. A large enough industrial consumer can capitalize on this flexibility through optimized bidding in electricity markets. In this work, the day-ahead cost minimization of a risk-averse pulp and paper mill (PPM) is formulated as a two-stage stochastic problem, considering thermodynamic and electrical constraints of the PPM. The bids in the energy and reserve markets are optimized subject to price uncertainty. The results of a case study in Sweden display a significant economic benefit in exploiting the flexibility of PPM. The expected cost of the pulp and paper mill resulting from different strategies are compared and the risk adversity of the PPM is investigated. We show that reserve offers can significantly improve the profitability of the PPM. QC 20200604

Due to the health and environment impacts of fossil fuels utilization, biofuels have been investigated as a potential alternative renewable source of energy. Bioethanol is currently the most produced biofuel, mainly of first generation, resulting in food-fuel competition. Second generation bioethanol is produced from lignocellulosic biomass, but a costly and difficult pretreatment is required. The pulp and paper industry has the biggest income of biomass for non-food-chain production, and, simultaneously generates a high amount of residues. According to the circular economy model, these residues, rich in monosaccharides, or even in polysaccharides besides lignin, can be utilized as a proper feedstock for second generation bioethanol production. Biorefineries can be integrated in the existing pulp and paper industrial plants by exploiting the high level of technology and also the infrastructures and logistics that are required to fractionate and handle woody biomass. This would contribute to the diversification of products and the increase of profitability of pulp and paper industry with additional environmental benefits. This work reviews the literature supporting the feasibility of producing ethanol from Kraft pulp, spent sulfite liquor, and pulp and paper sludge, presenting and discussing the practical attempt of biorefineries implementation in pulp and paper mills for bioethanol production.