Search

Combined paper mill biosolids (PB) and forest-derived liming by-products improve soil properties, but their residual effects following several years of application have hardly been investigated. A 13-year (2009–2021) field study was initiated at Yamachiche, QC, Canada, to assess the residual effects of PB and liming materials on the properties of a loamy soil. The PB was applied during nine consecutive years (2000–2008) at 0, 30, 60, and 90 Mg wet·ha−1, whereas the 30 Mg PB·ha−1 rate also received one of three liming materials (calcitic lime, lime mud, wood ash) at 3 Mg wet·ha−1. No amendment was applied during residual years. Past liming materials continued to increase soil pH but their effect decreased over time; meanwhile, past PB applications caused a low increase in residual soil NO3-N. Soil total C, which represented 40% of added organic C when PB applications ceased, stabilized to 15% after six years. Soil Mehlich-3-extractable contents declined over the thirteen residual years to be not significant for P, K, and Cu, while they reached half the values of the application years for Zn and Cd. Conversely, Mehlich-3 Ca was little affected by time. Therefore, land PB and liming material applications benefited soil properties several years after their cessation. [ABSTRACT FROM AUTHOR]

This article is a review of research efforts over the last decade on the sources and characteristics of substances in Canadian pulp mill effluents associated with two responses in fish: (1) induction of detoxification enzymes and (2) reproductive effects. The initial uncertainty regarding the role of chlorine bleaching and dioxins in these responses was resolved by the mid 1990s, when it was determined that effects were not correlated with effluent adsorbable organic halogen (AOX) levels and that releases of dioxins had decreased substantially. In the mid 1990s researchers were able to partially attribute enzyme activity induction in fish to wood components, while other studies showed individual wood extractives had the potential to affect fish reproduction. A lack of correlation between threshold reproductive responses and effluent concentrations indicated additional unidentified compounds and mechanisms were involved. In the late 1990s, source identification approaches in concert with the development of mechanistically linked in vitro and in vivo bioassays showed multiple compounds are affecting production and signaling of sex steroids in fish. These substances are bioavailable and accumulated rapidly, consistent with the body of evidence that has shown a sustained exposure is required to produce both elevated enzyme activity and depressions in sex steroid levels. The patterns of these substances in effluents and fish tissues are not correlated with production type or effluent treatment. Collectively, these findings show that bioactive substances originate from wood and are derived from lignin and/or terpenoids, they are liberated during pulp digestion, and in kraft mills they are present in black liquor and chemical recovery condensates. Additional bioactive substances are also present in bleachery effluents containing residual lignin. The lack of a definitive identification of the responsible compounds has prevented an evaluation of the effectiveness of industry-wide process changes. Continued research into the identities, origins, and environmental fate of these substances and the efficacy of effluent treatment is required to determine their significance and relationship to the existing impacts of effluents from pulp and paper mills in Canadian aquatic ecosystems. [ABSTRACT FROM AUTHOR]

Studies conducted in Sweden in the early 1980s provided some of the first evidence that effluents from some pulp mills were capable of inducing toxic responses in fish at very low concentrations in the receiving environment. In response to these findings, studies were initated in Canada and impacts of primary treated bleached kraft mill effluent on reproductive function in fish were found. Reproductive impacts in fish were not limited to mills that used chlorine in the bleaching process and were also evident at some mills that employed secondary effluent treatment. In 1992, new federal regulations were passed under the Canadian Environmental Protection Act to control releases of dioxins and furans, and a new Pulp and Paper Effluent Regulation under the Fisheries Act set stricter limits for biological oxygen demand and total suspended solids. Very importantly, the new regulations included requirements for environmental effects monitoring (EEM) at all mill sites. This allowed the effectiveness of the control limits in protecting fish, fish habitat, and human use of fisheries resources to be assessed. At the same time, the Minister of the Environment launched an intensive government, industry, and university research program. Results from this research program along with feedback from the EEM program would then be used to define what additional control actions might be necessary. This article reviews the field studies and mechanistic research conducted in Canada following the implementation of the new federal regulations. Great progress has been made in this area, first demonstrating reproductive effects at various locations, then determining the mechanisms responsible for the reproductive effects at specific sites, followed by the demonstration of partial recovery in reproductive function following process and treatment changes in response to the new regulations. However, it is clear from the results of the first two cycles of the EEM program that mill effluents still affect the local receiving environments at a number of locations across Canada, and that continued research combining field studies, bioassay application, and chemical identification is required. [ABSTRACT FROM AUTHOR]

Forty-one bacterial strains isolated from the headbox water of two machines in a Canadian paper mill were associated with the genera Asticcacaulis, Acidovorax, Bacillus, Exiguobacterium, Hydrogenophaga, Pseudomonas, Pseudoxanthomonas, Staphylococcus, Stenotrophomonas based on the sequence of their 16S rRNA genes. The metabolic profile of these strains were determined using Biolog EcoPlate, and the bacteria were divided into four metabolic groups. Metabolic profiles of the bacterial communities colonizing the headbox water of two paper machines was also determined weekly over a 1 year period. The only compound that was not reduced by the bacterial community was 2-hydroxybenzoic acid. Utilization frequency of the other carbon sources in the Biolog EcoPlate ranged from 3 to 100%. The metabolic profiles of the bacterial community did not vary considerably between the two paper machines. However, the metabolic profile varied among the sampling dates. [ABSTRACT FROM AUTHOR]

Looks at the turnaround safety performance in the Kenora, Ontario pulp and paper mill of Rainy River Forest Products Inc. which used a questionnaire survey technique. Description on the model developed for safety management; Elements assessed in the questionnaire developed; Survey results; Steps taken by the company to improve its safety rules. INSET: Beliefs & Practices for Excellence in Safety on Which the Model.

Over 100 bacteria from pulp and slime samples in a Canadian paper mill were identified by partial sequencing of their 16S rDNAs. Seventy-one percent of the isolates could be assigned to a bacterial genus with a high level of confidence. Another 12% exhibited at least 95% similarity within their 16S rDNA sequence with unidentified organisms that originate from warm or wet environments. Pseudomonas, Bacillus, and Pseudoxan-thomonas isolates were represented at a relatively high proportion in both pulp and slime samples. This is the first time that Pseudoxanthomonas strains have been isolated from pulp and slime samples on a paper machine. [ABSTRACT FROM AUTHOR]

Recycling of organic residues by composting is becoming an acceptable practice in our society. Co-composting dewatered paper mill sludge (PMS) and hardwood sawdust, two readily available materials in Canada, was investigated using uncontrolled and controlled in-vessel processes. The composted materials were characterized for total C and N, water-soluble, acid-hydrolyzable, and non-hydrolyzable N, extractable lipids, and by Fourier Transform Infrared (FT-IR) spectrophotometry. In the controlled scale process, the loss of organic matter was approximately 65% higher than in the uncontrolled process. After undergoing initial fluctuations in N fractions during the first two days of composting, by the end of the process, concentrations of water-soluble N decreased while those of acid-hydrolyzable and nonhydrolyzable N increased in the controlled process, whereas in the uncontrolled process, water-soluble N increased, but N in the other two fractions decreased continuously, indicating that the biochemical transformations of organic matter were not completed. Data on extractable lipids and FT-IR spectra suggest that the compost produced from the controlled process was bio-stable after 14 days, while the uncontrolled process was not stabilized after 18 days. In addition, FT-IR data suggest the biological activity during composting centered mainly on the degradation of aliphatic structures while aromatic structures were preserved. The co-composting of the PMS and hardwood sawdust can be successfully achieved if aeration, moisture, and bio-available C/N ratios are optimized to reduce losses of N. [ABSTRACT FROM AUTHOR]

During the process of papermaking by pulp and paper plants, a thick and viscous deposits, termed slime, is quickly formed around the paper machines, which can affect the papermaking process. In this study, we explored the composition of the bacterial biota in slime that developed on shower pipes from 2 machines at a Canadian paper mill. Firstly, the composition was assessed for 12 months by DNA profiling with polymerase chain reaction coupled with denaturing gradient gel electrophoresis. Except for short periods (2-3 months), clustered analyses showed that the bacterial composition of the slime varied substantially over the year, with less than 50% similarity between the denaturing gradient gel electrophoresis profiles. Secondly, the screening of 16S rRNA gene libraries derived from 2 slime samples showed that the most abundant bacteria were related to 6 lineages, including Chloroflexi, candidate division OP10, Clostridiales, Bacillales, Burkholderiales, and the genus Deinococcus. Finally, the proportion of 8 bacterial lineages, such as Deinococcus sp., Meiothermus sp., and Chloroflexi, was determined by the Catalyzed Reporter Deposition - Fluorescence In Situ Hybridization in 2 slime samples. The results showed a high proportion of Chloroflexi, Tepidimonas spp., and Schlegelella spp. in the slime samples. Lors du processus de fabrication industrielle du papier, un dépôt épais et visqueux se forme rapidement autour des machines à papier, ce qui peut affecter le processus de fabrication. Dans cette étude, nous avons exploré la composition bactérien ne du dépôt qui s'est développée sur des tuyaux des douches de 2 machines d'une usine à papier au Canada. La composition a d'abord été évaluée pendant 12 mois par la détermination du profil d'ADN par une réaction en chaîne par polymérase couplée à une électrophorèse sur gel en gradient dénaturant. À part de courtes périodes (2-3 mois), les analyses ont montré que la composition bactérienne du dépôt variait substantiellement au cours de l'année, avec moins de 50 % de similarité entre les profils en l'électrophorèse sur gel en gradient dénaturant. Deuxièmement, le criblage de banques géniques d'ARN ribosomique 16S dérivées de 2 échantillons de dépôt a ensuite montré que les bactéries les plus abondantes étaient apparentées à 6 lignées, notamment les Chloroflexi, la division candidate OP10, les Clostridiales, les Bacillales, les Burkholderiales, et le genre Deinococcus. Finalement, la proportion de 8 lignées bactériens comme Deinococcus sp., Meiothermus sp. et Chloroflexi a été déterminée par « Catalyzed Reporter Deposition - Fluorescence In Situ Hybridization » dans 2 échantillons de dépôt. Les résultats ont montré une forte proportion de Chloroflexi, Tepidimonas spp. et Schlegelella spp. dans les échantillons. [ABSTRACT FROM AUTHOR]

As part of a larger survey on cumulative effects within the Saint John River basin (Canada), a fish survey was conducted near Edmundston (NB, Canada) in the fall of 1999 using slimy sculpin (Cottus cognatus) and white sucker (Catostomus commersoni). The discharge environment receives effluent from the pulp mill, a paper mill, three sewage discharges, and tributaries receiving agricultural runoff. Sculpin collected downstream of the sewage discharges and pulp mill effluent had greater growth, condition, and liver size but no significant differences in gonad size. Stable isotope data indicated slimy sculpin did not move between sites. Female sculpin collected downstream of the paper mill showed no significant differences in length, body weight, age, condition factor, liver size, and gonad size compared to fish from reference sites. Female white sucker collected downstream of the pulp mill did not differ significantly in any measured parameter compared to reference fish. Liver sizes of white sucker from the Saint John River were outside the range considered to be indicative of uncontaminated riverine sites. In 2000, sculpin collected downstream from a poultry-processing facility had larger livers and lower condition factors, suggesting that the site is contaminated. We found no significant differences in sculpin length, weight, condition (except for males), and liver size in sculpin collected downstream from the pulp mill in October 2001. The responses of slimy sculpin and white sucker differed, perhaps in relation to differences in life history characteristics. Results from this study indicate the slimy sculpin is a suitable fish species for monitoring rivers that receive multiple industrial and municipal effluents. [ABSTRACT FROM AUTHOR]

Working at the mill had been a family affair for generations of Sturgeon Falls' mill workers, as young men followed their fathers, uncles, older broth­ers, and occasionally mothers, into the Northern Ontario mill - the town’s largest employer for more than a century. The mill’s workforce was over­whelmingly white and male, with a historic linguistic divide between largely English-speaking managers and mainly French-speaking production workers. This linguistic division of labour and the near total exclusion of Aboriginal people were remnants of industrial colonialism in the region. Within a year of the mill’s December 2002 closure, I began interviewing the former employ­ees about their experiences and these interviews continued for the next two years. During that time, efforts to reopen the mill fizzled out and it was demol­ished by the departing company. Work-life oral histories offer us a way into the shifting sands of culture and economy in this former mill town. This article explores the shifting sense of temporal and spatial proximity or distance in the plant shutdown stories told by 37 former mill workers. Several dimensions of proximity are explored such as the temporal proximity of the interview to the events being recounted, the perceived social proximity that prevailed before the mill closing, the remembered physical proximity of the mill in the narrated lives of residents, and, now, after the mill’s closure, the spectre of forced relocation or distant daily commutes to new jobs in other towns and cities. For long-service workers, employment mobility or permanent relo­cation was understood to be a last resort. These interviews make clear that forced employment mobility was a core concern to everyone we interviewed, not just those who actually relocated or commuted to jobs found elsewhere. [ABSTRACT FROM AUTHOR]

In Canada, there is almost 30 years of experience in developing tiered and triggered adaptive monitoring programs focused on looking at whether environmental concerns remain when pulp and paper mills, or metal mines, are in compliance with their discharge limits. These environmental effects monitoring programs were based on nationally standardized designs. Many of the programs have been developed through multi-stakeholder working groups, and the evolution of the program faced repeated frictions and differing opinions on how to design environmental monitoring programs. This paper describes key guidance to work through the initial steps in program design, and includes scientific advice based on lessons learned from the development of the Canadian aquatic environmental effects monitoring program. [ABSTRACT FROM AUTHOR]

The Kraft process is an intensive user of capital, energy, water, and chemicals, and is particularly vulnerable in the present precarious economic situation. Therefore, Canadian Kraft pulp mills offer good potential for improvement, especially if the equipment and unit operations are diagnosed in details by means of specific key performance indicators (KPI). The characterization and performance analysis of equipment is a prerequisite to optimization. A thorough evaluation of the equipment performance must be done to assess the actual vs. the expected performance before proceeding to any kind of energy improvement project. A systematic methodology for equipment performance evaluation through key performance indicators (KPIs) is presented in Part I. New key performance indicators (KPIs) based on dimensional analysis as well as other conventional key performance indicators are used to efficiently analyze and diagnose the causes of inefficiencies of the equipment, and propose adequate remedial actions. The methodology has been applied to an Eastern Canadian Kraft mill and several improvement projects leading to 30% of energy savings are proposed, entailing a low investment cost and a payback of 1.1 a. [ABSTRACT FROM AUTHOR]

This article examines the politics of defining time and space as they relate to forest use; how industrial, First Nation, tourism, and environmental actors appropriate different scales of time and space; and what types of conflicts are caused by these differences. Using theories of access and Torsten Hägerstand's time-geography concepts as a starting point, we connect the classifications of capability, coupling, and authority constraints to an empirical analysis of forest use. The article also introduces a conceptual classification of adaptation, evasion, and modification strategies to cope with these constraints. [ABSTRACT FROM AUTHOR]