Search

With growing concerns about global warming, it is crucial to adopt agronomic practices that enhance rice yields from paddy fields while reducing greenhouse gas (GHG) emissions for sustainable agriculture. An optimal nitrogen (N) fertilization rate and planting density are vital to ensure high rice yields, minimize GHG emissions, and understand emission behavior for better field management. We hypothesized that optimizing N application rates and planting density to improve nitrogen use efficiency (NUE) in rice cultivation would reduce resource losses and GHG emissions. To test this hypothesis, we implemented five treatments with a rice straw return cultural system: two planting densities (16 hills m−2 (traditional density, D1) and 20 hills m−2 (25% higher density, D2)) and three N application rates (no N fertilizer (N0), 180 kg N ha−1 (N1), and 144 kg N ha−1 (N2)). The control treatment (CK) was traditional planting density with no N fertilizer. The four new cropping modes were N1D1, N1D2, N2D1, and N2D2. We investigated the effects of N application rates and planting density on rice grain yield, NUE, and GHG emissions in multiple rice-growing seasons. The N1D2 treatment exhibited the highest grain yield over the three years, with a value of 10,452 kg ha−1, representing an increase of 12.2% compared to CK. Moreover, N uptake in N1D2 was the highest, averaging 39.2% (p < 0.05) higher than CK, and 8.5%, 3.5%, and 2.8% (p < 0.05) higher than N1D1, N2D1 and N2D2, respectively. N2D2 exhibited the highest NUE, with a value of 58.99 kg kg−1, surpassing all other treatments over the three years. GHG emissions, global warming potential (GWP), and greenhouse gas intensity (GHGI) in N2D2 were lower than in N1D1, N1D2, and N2D1. Additionally, reducing N application (comparing N1D1 to N2D1) and increasing plant density (comparing N1D1 to N1D2) improved N agronomic efficiency (NAE) and N partial productivity (PFPN). The negative correlation between the NAE and PFPN with GWP and GHG emissions further supports the potential for optimized N management and denser planting density to reduce environmental impact. These findings have important implications for sustainable rice cultivation practices in Southwest China and similar agroecosystems, emphasizing the need for integrated nutrient management strategies to achieve food security and climate change mitigation goals. [ABSTRACT FROM AUTHOR]

A novel functional polycarbonate (PAGC), characterized by the presence of double bonds within its side chain, was successfully synthesized through a ternary copolymerization of propylene oxide (PO), allyl glycidyl ether (AGE), and carbon dioxide (CO2). Polyhedral oligomeric silsesquioxanes octamercaptopropyl (POSS-SH) was employed as a crosslinking agent, contributing to the formation of organic–inorganic hybrid materials. This incorporation was facilitated through thiol-ene click reactions, enabling effective interactions between the POSS molecules and the double bonds in the side chains of the polycarbonate. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) confirmed a homogeneous distribution of silicon (Si) and sulfur (S) in the polycarbonate matrix. The thiol-ene click reaction between POSS-SH and the polycarbonate led to a micro-crosslinked structure. This enhancement significantly increased the tensile strength of the polycarbonate to 42 MPa, a notable improvement over traditional poly (propylene carbonate) (PPC). Moreover, the cross-linked structure exhibited enhanced solvent resistance, expanding the potential applications of these polycarbonates in various plastic materials. [ABSTRACT FROM AUTHOR]

The aggregate luminescence behaviors of polymeric luminescent materials have been attracting great attention. However, the importance of the polymerization process on luminescence, namely, polymerization‐induced emission (PIE), has rarely been overviewed. In this review, recent advances in polymerization with PIE effects are summarized, including PIE with aromatic rings based on one‐/two‐/multi‐component polymerizations, and PIE without aromatic rings according to disparate mechanisms of polymerizations. Typical examples are selected to elaborate the basic design principles, as well as the properties and potential applications of the luminous polymers. Moreover, the challenges and perspectives in this area are also discussed. [ABSTRACT FROM AUTHOR]

Simple Summary: Ovarian follicular cysts are one of the most common reproductive disturbances in dairy cows. However, the exact mechanism underlying this disorder is not clear enough and remains difficult to identify. Here, we found that there was a disrupted secretion of hormone and abnormal mRNA expression of corresponding receptors in bovine cystic follicles compared with control follicles. Further KEGG enrichment analyses of transcriptome indicated that the differential expressed genes were significantly enriched in the ovarian steroidogenesis pathway. Based on the findings of the study, metabolic and endocrine disorders were associated with bovine ovarian follicular cysts. After estrus, when mature follicles fail to ovulate, they may further develop to form follicular cysts, affecting the normal function of ovaries, reducing the reproductive efficiency of dairy cows and causing economic losses to cattle farms. However, the key points of ovarian follicular cysts pathogenesis remain largely unclear. The purpose of the current research was to analyze the formation mechanism of ovarian follicular cysts from hormone and gene expression profiles. The concentrations of progesterone (P4), estradiol (E2), insulin, insulin-like growth factor 1 (IGF1), leptin, adrenocorticotropic hormone (ACTH) and ghrelin in follicle fluid from bovine follicular cysts and normal follicles were examined using enzyme-linked immunosorbent assay (ELISA) or 125I-labeled radioimmunoassay (RIA); the corresponding receptors' expression of theca interna cells was tested via quantitative reverse transcription polymerase chain reaction (RT-qPCR), and the mRNA expression profiling was analyzed via RNA sequencing (RNA-seq). The results showed that the follicular cysts were characterized by significant lower E2, insulin, IGF1 and leptin levels but elevated ACTH and ghrelin levels compared with normal follicles (p < 0.05). The mRNA expressions of corresponding receptors, PGR, ESR1, ESR2, IGF1R, LEPR, IGFBP6 and GHSR, were similarly altered significantly (p < 0.05). RNA-seq identified 2514 differential expressed genes between normal follicles and follicular cysts. The Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis linked the ovarian steroidogenesis pathway, especially the STAR, 3β-HSD, CYP11A1 and CYP17A1 genes, to the formation of follicular cysts (p < 0.01). These results indicated that hormone metabolic disorders and abnormal expression levels of hormone synthesis pathway genes are associated with the formation of bovine ovarian follicular cysts. [ABSTRACT FROM AUTHOR]

Corpus luteum cysts are a serious reproductive disorder that affects the reproductive performance of sows. In this study, transcriptome and metabolome datasets of porcine normal and cyst luteal granulosa cells were generated to explore the molecular mechanism of luteal cyst formation. We obtained 28.9 Gb of high−quality transcriptome data from luteum tissue samples and identified 1048 significantly differentially expressed genes between the cyst and normal corpus luteum samples. Most of the differentially expressed genes were involved in cancer and immune signaling pathways. Furthermore, 22,622 information-containing positive and negative ions were obtained through gas chromatography−mass spectrometry, and 1106 metabolites were successfully annotated. Important differentially abundant metabolites and pathways were identified, among which abnormal lipid and choline metabolism were involved in the formation of luteal cysts. The relationships between granulosa cells of luteal cysts and cancer, immune-related signaling pathways, and abnormalities of lipid and choline metabolism were elaborated, providing new entry points for studying the pathogenesis of porcine luteal cysts. [ABSTRACT FROM AUTHOR]

In a Fourier transform infrared (IR) spectrometer, the Michelson interference signal extrapolation method based on linear prediction is often used to improve spectral resolution. In this method, an autoregressive (AR) model is established for the Michelson interference signal in the spectrometer. Once the AR model parameters are determined, the AR process is predictable. The interference signal can be used to figure out the AR model's parameters. Based on this, the AR model can be used to extrapolate the interference signal to improve the spectral resolution. In this paper, the forward–backward linear prediction total least squares (FB-TLS) method is proposed to estimate the parameters of the AR model. The parameters that are estimated are used to improve the IR spectral resolution. By simulating different order and signal-to-noise ratio situations, the effects of the Burg, the least square, and the FB-TLS parameter estimation methods on spectral resolution enhancement are studied. The simulation results demonstrate that the FB-TLS parameter estimation method can effectively suppress noise and avoid spurious peaks. The experimental results demonstrate that the FB-TLS parameter estimation method is effective for spectral resolution enhancement technology based on linear prediction. When the FB-TLS method is used to enhance NH3 IR spectral resolution from 2 cm−1 to 1 cm−1, the spectral prediction error in the NH3 characteristic band is only 0.21% compared with the measured NH3 spectrum, whose spectral resolution is 1 cm−1. Graphical Abstract This is a visual representation of the abstract. [ABSTRACT FROM AUTHOR]

Construction of CO2‐based amphiphilic block copolymers (ABCs) is an efficient method for providing CO2‐based polycarbonates with self‐assembly properties in aqueous media. It is challenging to construct CO2‐based ABCs by one‐step strategies from mixed monomers because hydrophilic blocks, usually composed of polar monomers, have negative effects on the synthesis of polycarbonates. In this work, we report a one‐step method to construct CO2‐based ABCs obtained by simultaneous ring‐opening copolymerization (ROCOP) of CO2/epoxides and reversible addition‐fragmentation chain transfer (RAFT) polymerization of N‐isopropyl acrylamide (NIPAM). A trithiocarbonate/carboxy compound was used as the bifunctional chain transfer agent, and an aluminum porphyrin complex was used as the catalyst for ROCOP, which proved to be efficient in CO2 copolymerization even in the presence of NIPAM with strong polarity. This strategy allows flexible control over the molecular weight (5–16 kg/mol) and the hydrophilic‐hydrophobic balance (HLB 9–18) of the ABCs, and ensures narrow polydispersity Đ (1.1–1.3) of the polymers. The ABCs can further self‐assemble into micelles in water with controllable diameters and reversible phase transformation behavior with temperature changes from 25 to 40 °C. This simple route to CO2‐based ABCs with multiple functions has large potential in biomedical applications. [ABSTRACT FROM AUTHOR]

Open-path Fourier Transform infrared spectroscopy (OP-FTIR) is widely used in polluted gas monitoring. The spectral resolution, as a key parameter of FTIR detection technology, affects the quantitative analysis of gas concentration. In OP-FTIR, the nonlinear least square (NLLS) method based on a synthetic background spectrum is used to quantitatively analyze the gas concentration, and the influence of the spectral resolution is studied. It is found that the influence of the spectral resolution on quantitative gas analysis is related to the full width at half maximum (FWHM) of the gas spectrum. The concentration of gases with different spectral FWHMs were quantitatively analyzed using infrared spectra with different resolutions (1, 2, 4, 8, 16 cm−1). The experimental results show that the relatively optimal spectral resolution for propane (C3H8) with a broad FWHM is 16 cm−1, where the standard deviation is 0.661 and the Allan deviation is only 0.015; the relatively optimal spectral resolution for ethylene (C2H4) with a narrow FWHM is 1 cm−1, where the standard deviation is 0.492 and the Allan deviation is only 0.256. Therefore, for the NLLS quantitative analysis method based on the synthetic background spectrum, which is used in OP-FTIR, gas with a narrow FWHM at high resolutions or gas with a broad FWHM at low resolutions is most effective for performing quantitative analyses. [ABSTRACT FROM AUTHOR]

As a powerful protocol for the preparation of common polymers, such as polyolefins, polyesters, and polycarbonates, late-transition-metal-catalyzed polymerization can be carried out by controlling the reaction conditions or developing dynamic catalytic systems that use external stimuli to influence the performance of the active sites, resulting in well-defined polymeric materials. In particularly, under the latter conditions, 'one catalyst' can provide more than one kind of polymer with a controlled sequence from the monomer mixture, making full use of the prepared catalyst. In this review, tunable modes, including reaction conditions, redox, light or electrochemical properties, Lewis acids, and alkali metal cations, of late-transition-metal-complex (especially iron, cobalt, and nickel)-catalyzed polymerization were collected and thoroughly discussed. [ABSTRACT FROM AUTHOR]

The copolymerization of carbon dioxide (CO2) with epoxides demonstrates promise as a new synthetic method for low-carbon polymer materials, such as aliphatic polycarbonate materials. In this study, a binary Schiff base cobalt system was successfully used to catalyze the copolymerization of 1,2-butylene oxide (BO) and CO2 and its terpolymerization with other epoxides such as propylene oxide (PO) and cyclohexene oxide (CHO). 1H nuclear magnetic resonance (1H NMR), diffusion-ordered spectroscopy (DOSY), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC) confirmed the successful synthesis of the alternating terpolymer. In addition, the effects of the polymerization reaction conditions and copolymerization monomer composition on the polymer structure and properties were examined systematically. By regulating the epoxide feed ratio, polycarbonates with an adjustable glass transition temperature (Tg) (11.2–67.8 °C) and hydrophilicity (water contact angle: 85.2–95.2°) were prepared. Thus, this ternary polymerization method provides an effective method of modulating the surface hydrophobicity of CO2-based polymers and their biodegradation properties. [ABSTRACT FROM AUTHOR]

The all‐in‐one flexible supercapacitor holds great promise for wearable electronics due to its stable electrochemical performance under continuous strain. However, it is a challenge to achieve good mechanical strength, self‐healing performance, and high energy density for their potential applications. For this purpose, a stretchable and healable all‐in‐one supercapacitor consisting of gelatin hydrogel electrolytes and polypyrrole electrodes is constructed. The gelatin hydrogel is obtained by the hydrolysis of leather waste shavings and then physically cross‐linked by simply soaking in a sodium sulfate solution. Benefiting from the Hofmeister series, the kosmotropic sodium sulfate ions can significantly enhance the hydrophobic interactions and chain bundling, thus greatly improving the mechanical strength of gelatin hydrogel. As a result, the as‐prepared all‐in‐one supercapacitor exhibits an area‐specific capacitance of 219.0 mF cm−2, a high energy density of 19.46 μWh cm−2, and long cycling life. In particular, the all‐in‐one supercapacitor can be deformed under varied stress–strain via decross‐linking and dissociation, simultaneously delivers reliable self‐healing capability. This work presents a simple and green technology to prepare an all‐in‐one supercapacitor, which motivates the development of biomass wastes toward high‐performance electronics. [ABSTRACT FROM AUTHOR]

Simple Summary: Larger litter size (born alive) and higher uniformity of piglets' birth weight are the most desired characteristics in pig production. Application of N-carbamylglutamate (NCG) was shown to increase litter size and decrease the coefficient of variation of piglets' birth weight from sows after conventional artificial insemination. In this study, we report that, in sows after fixed-time artificial insemination (FTAI), NCG improved the number of piglets born alive and the coefficient of variation of birth weight through direct effects (increased serum NCG levels) and indirect effects (altered intestinal microbiome and serum metabolites). These findings indicate that NCG can improve reproductive performance by improving both the number of piglets born alive and the uniformity of piglets' birth weight in sows after FTAI. N-carbamylglutamate (NCG) supplementation during gestation improves reproductive performance in sows after conventional artificial insemination. However, whether NCG can improve reproductive performance and change fecal microbiota and serum metabolite levels during pregnancy in sows after fixed-time artificial insemination (FTAI) remains unclear. Two hundred multiparous sows were assigned a diet from mating until farrowing: control (corn–soybean meal) or NCG supplementation (0.05% NCG). At days 30, 70, and 110 of gestation and after farrowing, maternal microbial diversity and serum metabolites were studied. Supplementation of NCG increased the number of piglets born alive and the litter weight (all p < 0.05) and altered the fetal microbial community during gestation. Some genera were particularly abundant at different time points during gestation and after farrowing, but none were commonly abundant across all four time points. Metabolic analysis revealed that NCG supplementation significantly increased the serum concentrations of NCG, ferulic acid, cinnamoylglycine, 3-phenyllactic acid, and gamma-glutamylglutamic acid in the NCG group compared with levels in the control group. Our results reveal that NCG supplementation during gestation improves reproductive performance in sows after FTAI, exerting both direct (increased serum NCG levels) and indirect effects (altered intestinal microbiome and serum metabolites) on sow reproduction and, ultimately, improving placental and fetal development. [ABSTRACT FROM AUTHOR]