Search

Your search keyword '"Laurent-Brocq, Mathilde"' showing total 48 results
Start Over Author "Laurent-Brocq, Mathilde" Search Limiters Academic (Peer-Reviewed) Journals
48 results on '"Laurent-Brocq, Mathilde"'

6. Experimental and theoretical study of tracer diffusion in a series of (CoCrFeMn)$_{100-x}$Ni$_x$ alloys

Author

Kottke, Josua, Utt, Daniel, Laurent-Brocq, Mathilde, Fareed, Adnan, Gaertner, Daniel, Perriere, Loic, Rogal, Lukasz, Stukowski, Alexander, Albe, Karsten, Divinski, Sergiy V., and Wilde, Gerhard

Subjects
Condensed Matter - Materials Science
Abstract

Tracer diffusion of all constituting elements is studied at various temperatures in a series of (CoCrFeMn)$_{100-x}$Ni$_x$ alloys with compositions ranging from pure Ni to the equiatomic CoCrFeMnNi high-entropy alloy. At a given homologous temperature, the measured tracer diffusion coefficients change non-monotonically along the transition from pure Ni to the concentrated alloys and finally to the equiatomic CoCrFeMnNi alloy. This is explained by atomistic Monte-Carlo simulations based on a modified embedded-atom potentials, which reveal that local heterogeneities of the atomic configurations around a vacancy cause correlation effects and induce significant deviations from predictions of the random alloy model., Comment: 16 pages; 10 figures

Published
2020

24. XPS study of the thermal stability of passivated NiCrFeCoMo multi-principal element alloy surfaces

Author

Wang, Xueying, Mercier, Dimitri, Zanna, Sandrine, Seyeux, Antoine, Pérrière, Loïc, Laurent-Brocq, Mathilde, Guillot, Ivan, Maurice, Vincent, and Marcus, Philippe

Subjects
Passive oxide film, XPS, Thermal stability, Multi-principal element alloy, CrFeCoNiMo
Abstract

X-ray photoelectron spectroscopy analysis was applied to investigate the thermal stability under ultra-high vacuum environment of the surface oxide film formed by electrochemical passivation of a newly-designed Cr15Fe10Co5Ni60Mo10 (at. %) multi-principal element alloy and providing the alloy superior localized corrosion resistance compared to conventional stainless steels and alloys. A spectral decomposition methodology involving the subtraction of Auger peaks overlapping the Fe2p and Co2p core level regions was applied for quantification of the oxide film composition and thickness. The results show that, at 100 °C, the passive oxide film is mainly dehydrated and dehydroxylated. Obvious loss of Ni hydroxide and conversion of Mo(VI) to Mo(IV) species are observed at 200 °C, with further reduction of Mo species to Mo(III) observed at 300 °C. In this temperature range, the total cation quantity in the oxide film remains stable despite the compositional alteration. At 400 °C, Cr(III) oxide forms at the expense of Fe and Mo oxides, resulting in an oxide film essentially consisting of chromium oxide. At 500 °C, Cr(III) oxide is eliminated, making the passive film unstable at this temperature. Possible Cr oxide removal mechanisms are discussed.

Published
2023

27. NextGen Speaks

Author

NAGA, HANI I., PETACH, HELEN, LUZYNSKI, KEN, MADIBELA, OTHUSITSE RICKY, ZHOU, KAILE, NAI, CORRADO, CAPITELLI, NICOLÁS A., LAURENT-BROCQ, MATHILDE, GONZÁLEZ, PABLO ADRIÁN, BRKIC, MARJANA, ELKIN, JAVIER, MAPHANGA, REGINA, NOLL, MEGAN, ADRIAENSSENS, ELIAS, GARFIELD, DAVID, ARAMI, HAMED, TIPER, IRINA, LI, FENGBO, PHILLIPS, ELIZABETH M., and KEMP, MICHAEL G.

Published
2014

28. Compositionally complex alloys: some problems and prospects

Author

Babić, Emil, Basletić, Mario, Figueroa, Ignacio, Laurent-Brocq, Mathilde, Michalik, Štefan, Pervan, Petar, Ristić, Ramir, Salčinović-Fetić, Amra, Starešinić, Damir, Zadro, Krešo, and Bilušić, Ante

Subjects
HEA, glassy alloys, Cantor alloys
Abstract

Despite a huge expansion of research on compositionally complex alloys, CCA (such as the entropy alloys, HEA and the corresponding glassy alloys) their comprehension is still limited, which is detrimental both for the design of CCAs and for their application. The broad compositional range in CCAs enables simple tuning of their properties by varying the contents of their constituent elements. Accordingly, the study of transition from CCA to conventional alloy, CA composed from the same constituents is important, both for understanding the formation of solid solutions in CCAs and for proper evaluation of their potential with respect to that of CAs. However, this transition has so far been studied systematically in only two types of alloys: isopleths of the Cantor alloy and glassy TiZrNbCuNi/Co alloys with variable Co, Ni or Cu content (Materials 14 (2021) 5824 and ref. therein). In both alloy systems the variation of a given property with composition depends sharply on the selected principal component and can be either monotonic (like that in the ideal solid solution) or non-monotonic. When the variation is non- monotonic, the maximum value of the selected property is usually outside of HEA composition range.

Published
2022

29. Are compositionally complex alloys intrinsically better than conventional ones?

Author

Babić, Emil, Drobac, Đuro, Figueroa, Ignacio, Laurent-Brocq, Mathilde, Marohnić, Željko, Michalik, Stefan, Mikšić-Trontl, Vesna, Perriere, Loic, Pervan, Petar, Ristić, Ramir, Salčinović-Fetić, Amra, Zadro, Krešo, and Prof. Dr. Maryam Tabrizian, Prof. Dr. Filippo Berto

Subjects
Compositionally complex alloys, High-entropy alloys, Electronic structure
Abstract

Despite a huge expansion of research on compositionally complex alloys, CCA (such as the approximately equimolar, multi-component high- entropy alloys, HEA and the corresponding high- entropy glassy alloys), their basic understanding is still limited, which is detrimental both for the design of CCAs and for their application. In particular, the prediction of compositions capable of forming random solid solutions (RSSs) and the prediction of their properties is still a problem. Nevertheless, some properties of a few CCAs exceed those of conventional alloys (CA) [1].

Published
2022

30. Conception d’alliages métalliques innovants : contrôler la microstructure et les propriétés mécaniques par la composition chimique et les conditions d’élaboration

Author

Laurent-Brocq, Mathilde, Institut de Chimie et des Matériaux Paris-Est (ICMPE), Institut de Chimie du CNRS (INC)-Université Paris-Est Créteil Val-de-Marne - Paris 12 (UPEC UP12)-Centre National de la Recherche Scientifique (CNRS), Université Paris Est Créteil, Yannick Champion, and Laurent-Brocq, Mathilde

Subjects
[CHIM.MATE] Chemical Sciences/Material chemistry, Caratérisation, Métallurgies, Comportement mécanique, Characterization, Metallurgy, Conception d'alliages, [SPI.MECA.MEMA]Engineering Sciences [physics]/Mechanics [physics.med-ph]/Mechanics of materials [physics.class-ph], [CHIM.MATE]Chemical Sciences/Material chemistry, Mechanical behavior, Alloy design, [SPI.MECA.MEMA] Engineering Sciences [physics]/Mechanics [physics.med-ph]/Mechanics of materials [physics.class-ph]
Published
2021

31. Vers une amélioration du recyclage des métaux et alliages métalliques

Author

Lilensten, Lola, Laurent-Brocq, Mathilde, Laurent-Brocq, Mathilde, Institut de Recherche de Chimie Paris (IRCP), Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Ecole Nationale Supérieure de Chimie de Paris - Chimie ParisTech-PSL (ENSCP), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Ministère de la Culture (MC), Institut de Chimie et des Matériaux Paris-Est (ICMPE), Institut de Chimie du CNRS (INC)-Université Paris-Est Créteil Val-de-Marne - Paris 12 (UPEC UP12)-Centre National de la Recherche Scientifique (CNRS), Ecole Nationale Supérieure de Chimie de Paris - Chimie ParisTech-PSL (ENSCP), and Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Ministère de la Culture (MC)

Subjects
[SDE] Environmental Sciences, alliages, métaux, impuretés, [SDE]Environmental Sciences, propriétés, [CHIM] Chemical Sciences, procédés, [CHIM]Chemical Sciences, recyclage, conception, ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2021

32. Chemically architectured HEA: how the chemical gradient width influences the mechanical properties

Author

Laurent-Brocq, Mathilde, Mereib, Diaa, Danard, Yolaine, Monnier, Judith, Perriere, Loic, Villeroy, Benjamin, Institut de Chimie et des Matériaux Paris-Est (ICMPE), Institut de Chimie du CNRS (INC)-Université Paris-Est Créteil Val-de-Marne - Paris 12 (UPEC UP12)-Centre National de la Recherche Scientifique (CNRS), and Laurent-Brocq, Mathilde

Subjects
[CHIM] Chemical Sciences, [CHIM]Chemical Sciences, ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2020

33. Transition from High-Entropy to Conventional Alloys: Which Are Better?

Author

Babić, Emil, primary, Drobac, Đuro, additional, Figueroa, Ignacio Alejandro, additional, Laurent-Brocq, Mathilde, additional, Marohnić, Željko, additional, Mikšić Trontl, Vesna, additional, Pajić, Damir, additional, Perrière, Loїc, additional, Pervan, Petar, additional, Remenyi, Gyorgy, additional, Ristić, Ramir, additional, Salčinović Fetić, Amra, additional, Starešinić, Damir, additional, and Zadro, Krešo, additional

Published
2021
Full Text
View/download PDF

38. Activation volume in heterogeneous deformation of Mg65Cu12.5Ni12.5(Ce75La25)10 metallic glass.

Author

Thurieau, Nicolas, Perrière, Loïc, Laurent-Brocq, Mathilde, and Champion, Yannick

Subjects
ELECTRIC properties of metallic glasses, MAGNETIC properties of metallic glasses, MEASUREMENT of shear (Mechanics), SHEAR flow, ELECTRON glasses
Abstract

Depth variation at constant load in instrumented nano-indentation was used to measure activation volume controlling shear band formation in the Mg65Cu12.5Ni12.5(Ce75La25)10 metallic glass. A series of measurements revealed a large scattering of the data spanning from 100 Å3 to 800 Å3. The distribution of values, which is not following a normal one, may be attributed to the atomic structure of metallic glasses with the absence of long range order, leading to different volume fraction of shear bands for independent experiments. Activation volume is analyzed considering the variation of shear band volume fraction leading to a unique value of a true activation volume. An interpretation for the distribution of values is proposed. [ABSTRACT FROM AUTHOR]

Published
2015
Full Text
View/download PDF

39. Precipitation and Hardness of Carbonitrides in a CrMnFeCoNi High Entropy Alloy

Author

Laurent-Brocq, Mathilde, Sauvage, Xavier, Akhatova, Alfiya, Perriere, Loic, Leroy, Eric, Champion, Yannick, Institut de Chimie et des Matériaux Paris-Est (ICMPE), Institut de Chimie du CNRS (INC)-Université Paris-Est Créteil Val-de-Marne - Paris 12 (UPEC UP12)-Centre National de la Recherche Scientifique (CNRS), Groupe de physique des matériaux (GPM), Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences appliquées Rouen Normandie (INSA Rouen Normandie), Institut National des Sciences Appliquées (INSA)-Normandie Université (NU)-Institut National des Sciences Appliquées (INSA)-Normandie Université (NU)-Université de Rouen Normandie (UNIROUEN), Normandie Université (NU), Université Paris-Est Créteil Val-de-Marne - Paris 12 (UPEC UP12)-Centre National de la Recherche Scientifique (CNRS)-Institut de Chimie du CNRS (INC), Université de Rouen Normandie (UNIROUEN), Normandie Université (NU)-Normandie Université (NU)-Institut national des sciences appliquées Rouen Normandie (INSA Rouen Normandie), Institut National des Sciences Appliquées (INSA)-Normandie Université (NU)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS)-Institut de Recherche sur les Matériaux Avancés (IRMA), Université de Caen Normandie (UNICAEN), Normandie Université (NU)-Normandie Université (NU)-École Nationale Supérieure d'Ingénieurs de Caen (ENSICAEN), Normandie Université (NU)-Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Université de Rouen Normandie (UNIROUEN), Normandie Université (NU)-Institut national des sciences appliquées Rouen Normandie (INSA Rouen Normandie), Institut National des Sciences Appliquées (INSA)-Normandie Université (NU)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS)-Université de Caen Normandie (UNICAEN), Normandie Université (NU)-École Nationale Supérieure d'Ingénieurs de Caen (ENSICAEN), and Normandie Université (NU)-Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Centre National de la Recherche Scientifique (CNRS)

Subjects
[CHIM.MATE]Chemical Sciences/Material chemistry
Abstract

International audience; In order to explore precipitation hardening, carbonitrides precipitates are formed within a CrMnFeCoNi high entropy alloy (HEA). The matrix and the precipitates are independently characterized by electron probe microanalysis, atom probe tomography, transmission electron microscopy, and nanoindentation. The matrix is a face-centered cubic multi-component non-equimolar solid-solution, that is, Cr depleted, which is stable and interestingly as hard as its equimolar counterpart. The precipitates are stable chromium carbonitrides with a micron-scale platelets morphology. They exhibit a hexagonal structure, are semi-coherent with the matrixm and are harder than the matrix.

Published
2017

41. Insights into the phase diagram of the CrMnFeCoNi high entropy alloy using electromagnetic melting and casting

Author

Laurent-Brocq, Mathilde, Perrière, Loïc, Sauvage, Xavier, Champion, Yannick, Institut de Chimie et des Matériaux Paris-Est (ICMPE), Institut de Chimie du CNRS (INC)-Université Paris-Est Créteil Val-de-Marne - Paris 12 (UPEC UP12)-Centre National de la Recherche Scientifique (CNRS), Groupe de physique des matériaux (GPM), Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences appliquées Rouen Normandie (INSA Rouen Normandie), Institut National des Sciences Appliquées (INSA)-Normandie Université (NU)-Institut National des Sciences Appliquées (INSA)-Normandie Université (NU)-Université de Rouen Normandie (UNIROUEN), Normandie Université (NU), ETAY, Jacqueline, Université de Rouen Normandie (UNIROUEN), Normandie Université (NU)-Normandie Université (NU)-Institut national des sciences appliquées Rouen Normandie (INSA Rouen Normandie), Institut National des Sciences Appliquées (INSA)-Normandie Université (NU)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS)-Institut de Recherche sur les Matériaux Avancés (IRMA), Université de Caen Normandie (UNICAEN), Normandie Université (NU)-Normandie Université (NU)-École Nationale Supérieure d'Ingénieurs de Caen (ENSICAEN), Normandie Université (NU)-Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Université de Rouen Normandie (UNIROUEN), Normandie Université (NU)-Institut national des sciences appliquées Rouen Normandie (INSA Rouen Normandie), Institut National des Sciences Appliquées (INSA)-Normandie Université (NU)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS)-Université de Caen Normandie (UNICAEN), Normandie Université (NU)-École Nationale Supérieure d'Ingénieurs de Caen (ENSICAEN), and Normandie Université (NU)-Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Centre National de la Recherche Scientifique (CNRS)

Subjects
[SPI]Engineering Sciences [physics], atom probe tomography, [SPI] Engineering Sciences [physics], high entropy alloy, phase diagram
Abstract

International audience; High entropy alloys are single phase metallic materials, composed of more than 4 elements in equi-atomic proportionwhich is the maximum in the configurational entropy. In order to study the thermodynamics of those alloys, anequimolar CrMnFeCoNi HEA was processed by electromagnetic melting, casting and annealing under varyingconditions (cooling rate and annealing duration) and the evolution of the structure and microstructure was studied. Aftercasting, a dendritic microstructure was formed whose characteristic length depends on the cooling rate. Annealing leadsto a chemical homogenization of the microstructure. Indeed a true solid-solution down to the atomic scale wasevidenced in an HEA by atom probe tomography. It was shown that this face-centered cubic single-phase solid solutionis the high temperature stable state of the equimolar CrMnFeCoNi alloy. By analogy with completely miscible binaryalloy, the CrMnFeCoNi HEA can be described by a schematic phase diagram of the CrFeCo - MnNi system consistingof a liquidus and a solidus.

Published
2015

42. Activation volume in heterogeneous deformation of Mg65Cu12.5Ni12.5(Ce75La25)10 metallic glass

Author

Thurieau, Nicolas, Perriere, Loic, Laurent-Brocq, Mathilde, Champion, Yannick, Institut de Chimie et des Matériaux Paris-Est (ICMPE), Université Paris-Est Créteil Val-de-Marne - Paris 12 (UPEC UP12)-Centre National de la Recherche Scientifique (CNRS)-Institut de Chimie du CNRS (INC), Science et Ingénierie des Matériaux et Procédés (SIMaP), Université Joseph Fourier - Grenoble 1 (UJF)-Centre National de la Recherche Scientifique (CNRS)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Institut de Chimie du CNRS (INC)-Institut National Polytechnique de Grenoble (INPG), and Champion, Yannick

Subjects
[CHIM.MATE] Chemical Sciences/Material chemistry, [CHIM.MATE]Chemical Sciences/Material chemistry, ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2015

44. Synthèse et caractérisation d'un acier ODS préparé par un procédé inspiré du broyage réactif - Etude de l'influence des conditions de broyage et recuit

Author

Laurent-Brocq, Mathilde, Service de recherches de métallurgie physique (SRMP), Département des Matériaux pour le Nucléaire (DMN), CEA-Direction des Energies (ex-Direction de l'Energie Nucléaire) (CEA-DES (ex-DEN)), Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Université Paris-Saclay-CEA-Direction des Energies (ex-Direction de l'Energie Nucléaire) (CEA-DES (ex-DEN)), Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Université Paris-Saclay, Université Rennes 1, Gérard Le Caër(gerard.le-caer@univ-rennes1.fr), Laboratoire Léon Brillouin (CEA-CNRS), and Groupe de Physique des Matériaux (Univ Rouen - INSA Rouen)

Subjects
Réacteurs nucléaires, Métallurgie des poudres, Nuclear reactors, Mécanosynthèse, Powder metallurgy, Broyage, Nanoparticules, Nanoparticles, Nanostructured materials, Mechanical alloying, [CHIM.MATE]Chemical Sciences/Material chemistry, Matériaux nanostructurés
Abstract

In the framework of ODS (Oxide Dispersion Strengthened) steels development for application as core materials in future nuclear reactors, a new process based on a reactive-inspired ball-milling, which consists in using YFe3 and Fe2O3 instead of Y2O3, and the influence of synthesis conditions on nano-oxides features were studied. To do so, ODS steels were prepared by ball-milling and annealing and then multi-scale characterizations were done after each step of the process. Atom probe tomography and small angle neutron scattering were used. It was shown that reactive-inspired ball-milling process was efficient for ODS steel synthesis, although it does not modify nano-oxides features. Broadly speaking, the nature of milling reactants has no impact on nano-oxides formation. Moreover it was proven that nano-oxides nucleation can start during ball-milling and afterwards it continues during annealing with a very fast kinetic. The features of nano-oxides formed in this way can be controlled through variations of ball-milling parameters (intensity, temperature and atmosphere) and annealing parameters (duration and temperature). Finally, it was shown that controlling ball-milling conditions was necessary to control the ODS steel final state.; Dans le cadre du développement des aciers ODS (Oxide Dispersion Strengthened) pour le cœur des réacteurs nucléaires du futur, ce travail s'est focalisé sur l'étude d'une nouvelle voie de synthèse inspirée du broyage réactif, consistant à remplacer le réactif Y2O3 par YFe3 et Fe2O3, et sur l'influence des conditions de synthèse sur les caractéristiques des nano-oxydes. Pour cela, des aciers ODS ont été synthétisés par broyage et recuit et des caractérisations multi-échelles ont été effectuées après chaque étape de la synthèse. En particulier, on a utilisé la sonde atomique tomographique et la diffusion des neutrons aux petits angles. On a ainsi montré que le procédé inspiré du broyage réactif permet la synthèse d'un acier ODS mais qu'il ne modifie pas les caractéristiques des nano-oxydes. Plus généralement, la forme des réactifs de broyage n'a pas d'influence sur la formation des nano-oxydes. Ensuite, on a mis en évidence que la germination des nano-oxydes pouvait commencer au cours du broyage avant de se poursuivre avec une cinétique très rapide au cours du recuit. Les caractéristiques des nano-oxydes ainsi formés peuvent être contrôlées en faisant varier les paramètres de broyage (intensité, température et atmosphère) et de recuit (durée et température). Enfin, on a montré qu'il était nécessaire de contrôler les conditions de broyage pour maîtriser l'état final d'un acier ODS.

Published
2010

47. NextGen Speaks.

Author

LAURENT-BROCQ, MATHILDE

Subjects
*CARTOONS & children, *SCIENCE in literature
Published
2014

48. Tensile and shear behavior of recycled AA 6060 aluminium chips by direct hot extrusion.

Author

Corre, Thomas, Perrin, Jason, Gebhard, Johannes, Duchateau, Théo, Lilensten, Lola, Laurent-Brocq, Mathilde, Tekkaya, A. Erman, and Huneau, Bertrand

Subjects
*DIGITAL image correlation, *ALUMINUM recycling, *HEAT treatment, *ALUMINUM alloys, *WASTE recycling
Abstract

Solid state recycling of aluminium chips is a promising technique to reduce environmental impacts of secondary production. As the recycling process induces a highly oriented microstructure, this study aims to quantify the mechanical properties of extrudates and identify the role of chip boundaries in the fracture behavior. Tensile and shear tests are performed on heat treated AA 6060 alloy and analyzed using digital image correlation. The tensile behavior of the chip-based material is similar to its cast-based counterpart, reaching a yield strength of 230 MPa. Shear properties are close for small deformations, although the chip-based material have lower ductility due to the early onset of damage at the chip boundary. These results confirm the industrial relevance of this process for large scale recycling of aluminium. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results