Search

Zeolite 13X is an excellent candidate for the capture of CO2. However, this system needs to be investigated in more detail with regard to adsorption and diffusion. For this purpose, frequency response (FR) measurements were carried out with binderless zeolite 13X (NaMSX) and CO2. The size of the particles and the sample amount were modified in order to investigate their effects on diffusion processes. Macropore diffusion was detected and the corresponding diffusion coefficients were determined. The mentioned system was additionally used to evaluate the performance of the in‐house FR apparatus. [ABSTRACT FROM AUTHOR]

A numerical simulation was conducted to study the free convection of Ag/H2O nanofluid between a square cavity with cold walls and an egg shaped cylinder with a hot wall. Utilizing the egg equation, dimensionless governing equations were solved using the Galerkin Finite Element Method (GFEM). In this work, several parameters were studied, i.e. Rayleigh number (10³ ≤ Ra ≤ 106), volume fraction (0 ≤ φ ≤ 0.05), position (-0.2 ≤ Y ≤ 0.2), and orientation angle (-90° ≤ γ ≤ 90°). The numerical results are presented as streamline contours, isotherm contours, and local and average Nusselt numbers. Moreover, the results were used to analyze the fluids' structure, temperature distribution, and heat transfer rate. The numerical results confirmed that the stream intensity value increased with an increase of the Rayleigh number as well as the movement of the cylinder towards the bottom wall for all values of the orientation angle. Variation of the vertical position of the cylinder inside the cavity had a noticeable effect on 𝑁𝑢𝐿, which increased by 50% at γ = -90°, and by 58% at γ = -45°. However, at Y = -0.2, 𝑁𝑢𝐿 increased by 58% at γ = -45° and decreased by 7% at γ = -90°. The highest heat transfer rate was obtained at high Rayleigh number (Ra = 106), volume fraction (φ = 0.05), negative position (Y = -0.2), and the highest positive orientation angle (γ = 90°). [ABSTRACT FROM AUTHOR]

The energy loss through building components resulting in higher energy consumption, thus energy saving has become an essential aspect in design and comfort. This study aims to optimize the thermal insulation of red clay bricks used in the walls of buildings by using a multiscale method. The finite element approach in ABAQUS software has been used to simulate the bricks under different configurations and conditions. Due to cost and time challenges and difficulties in simulation and complex calculations, simplified and applicable equations have been derived to calculate thermal insulation properties. The results show that the paper's brick design has a significant thermal conductivity reduction that could reach more than one-third of the other corresponding studies. The study goes to fill the hollow bricks by the insulation polyurethane foam (PUF) and comparing the results with air hollow bricks. Besides its other advantages, the outcomes reveal that using the PUF has a noticeable desired-influence in thermal insulation when considering the heat transfer by convection and radiation inside the air cavity of bricks. [ABSTRACT FROM AUTHOR]

The study has used Geographic Information Systems (GIS) data and Arc GIS software, to produce a new map. This map contains a spatial database of the newly constructed buildings, in the area of water resources engineering college, and using the above tool for updating contains the college in any time, also the map and browse all buildings individually or in clustered, for example, browsing geometric data, statistical data and the plans of drawings, and make any necessary changes to these sectors immediately, or in the future, like the expansion of the study halls by constructed a new floor, or add supplements, prepare any electrical to any building, and anything else. The paper also, updates the old Google Earth image, for the college boundary that took place before some years ago, and drawing the new locations, of a new building, the Global Positioning System (GPS), to produce a new map. [ABSTRACT FROM AUTHOR]