Search

Abstract LOPES, the LOFAR prototype station, was an antenna array for cosmic-ray air showers operating from 2003 to 2013 within the KASCADE-Grande experiment. Meanwhile, the analysis is finished and the data of air-shower events measured by LOPES are available with open access in the KASCADE Cosmic Ray Data Center (KCDC). This article intends to provide a summary of the achievements, results, and lessons learned from LOPES. By digital, interferometric beamforming the detection of air showers became possible in the radio-loud environment of the Karlsruhe Institute of Technology (KIT). As a prototype experiment, LOPES tested several antenna types, array configurations and calibration techniques, and pioneered analysis methods for the reconstruction of the most important shower parameters, i.e., the arrival direction, the energy, and mass-dependent observables such as the position of the shower maximum. In addition to a review and update of previously published results, we also present new results based on end-to-end simulations including all known instrumental properties. For this, we applied the detector response to radio signals simulated with the CoREAS extension of CORSIKA, and analyzed them in the same way as measured data. Thus, we were able to study the detector performance more accurately than before, including some previously inaccessible features such as the impact of noise on the interferometric cross-correlation beam. These results led to several improvements, which are documented in this paper and can provide useful input for the design of future cosmic-ray experiments based on the digital radio-detection technique.

Abstract The ‘KASCADE Cosmic ray Data Centre’ is a web portal (https://kcdc.ikp.kit.edu), where the data of the astroparticle physics experiment KASCADE-Grande are made available for the interested public. The KASCADE experiment was a large-area detector for the measurement of high-energy cosmic rays via the detection of extensive air showers. The multi-detector installations KASCADE and its extension KASCADE-Grande stopped the active data acquisition in 2013 after more than 20 years of data taking. In several updates since our first release in 2013 with KCDC we provide the public measured and reconstructed parameters of more than 433 million air showers. In addition, KCDC provides meta data information and documentation to enable a user outside the community of experts to perform their own data analysis. Simulation data from three different high energy interaction models have been made available as well as a compilation of measured and published spectra from various experiments. In addition, detailed educational examples shall encourage high-school students and early stage researchers to learn about astroparticle physics, cosmic radiation as well as the handling of Big Data and about the sustainable and public provision of scientific data.

The radio technique is a promising method for detection of cosmic-ray air showers of energies around 100PeV and higher with an array of radio antennas. Since the amplitude of the radio signal can be measured absolutely and increases with the shower energy, radio measurements can be used to determine the air-shower energy on an absolute scale. We show that calibrated measurements of radio detectors operated in coincidence with host experiments measuring air showers based on other techniques can be used for comparing the energy scales of these host experiments. Using two approaches, first via direct amplitude measurements, and second via comparison of measurements with air shower simulations, we compare the energy scales of the air-shower experiments Tunka-133 and KASCADE-Grande, using their radio extensions, Tunka-Rex and LOPES, respectively. Due to the consistent amplitude calibration for Tunka-Rex and LOPES achieved by using the same reference source, this comparison reaches an accuracy of approximately 10% – limited by some shortcomings of LOPES, which was a prototype experiment for the digital radio technique for air showers. In particular we show that the energy scales of cosmic-ray measurements by the independently calibrated experiments KASCADE-Grande and Tunka-133 are consistent with each other on this level. Keywords: Cosmic rays, Radio detection, LOPES, Tunka-Rex, Tunka-133, KASCADE-Grande

KASCADE-Grande is an extensive air shower experiment devoted to the study of cosmic rays in the 1016 ÷ 1018 eV energy range. The array is composed by different detectors allowing independent measurements of the number of muons (Nμ) and charged particles (Nch) of extensive air showers (EAS). These two observables are then used to study the primary energy spectrum, separating the events in two samples, on the basis of the shower size ratio, corrected for attenuation in the atmosphere, lnNμ/ lnNch. The two samples represent the light and heavy mass groups of the primaries. In the studied energy range only the spectrum of heavy primaries shows a significant change of slope, the energy (estimated using the QGSJET II hadronic interaction model) of this feature is in agreeement with the expectations of a rigidity dependent knee feature.

Abstract  The electron and muon number of extensive air showers (EAS) measured at ground level are the main observables of the detector array of the KASCADE experiment. The two-dimensional frequency distribution of these observables is used for reconstructing the energy spectra of five elemental groups representing the chemical composition of primary cosmic rays in the energy range from 1015 eV to 1017 eV. The results of the presented unfolding analysis depend crucially on simulations of EAS, and therefore on the hadronic interaction models used for their generation. As it turns out, the results for the individual energy spectra show to be sensitive to the characteristics of the interaction model used. Furthermore, none of the models discussed (QGSJet and SIBYLL) is capable to describe the data consistently over the whole measurement range with discrepancies appearing in different energy regions. [ABSTRACT FROM AUTHOR]

Abstract  KASCADE-Grande is a multi-detector setup to get redundant information on single air shower basis. The information is used to perform multi-parameter analyses to solve the threefold problem of the reconstruction of the unknown primary energy, the primary mass, and to quantify the characteristics of the hadronic interactions in the air-shower development. This contribution discusses the various ways of testing the hadronic interaction mechanisms with data of the original KASCADE experiment and their results, as well as the capabilities in testing the models with the extension of KASCADE, the KASCADE-Grande experiment. Though no hadronic interaction model is fully able to describe the multi-parameter data of KASCADE consistently, the more recent models or improved versions of older models reproduce the data better than a few years ago. [ABSTRACT FROM AUTHOR]