Search

Interlayer functionalization modulation is essential for modifying LDHs and improving their selectivity and adsorption capacity for target pollutants. In this work, Glu@NiFe-LDH was synthesized using a simple one-step hydrothermal method and tested for its ability to remove CrO42− from wastewater. The modification significantly increased the composite material's removal ability by 2–3 times, up to 98.36 mg g−1. The behavior of CrO42− adsorption on Glu@NiFe-LDH was further studied by adjusting the affecting factors (i.e., temperature, pH, contact time, initial concentration, and interfering substance), and the adsorption behavior was confirmed as a spontaneous and chemisorption process. And the result was that Glu@NiFe-LDH demonstrated high capacity, efficiency, stability, and selectivity for the adsorption of CrO42− in a single electrolyte and natural water containing competing anions. Furthermore, molecular dynamics simulations (NVT ensemble) were employed to further reveal the mechanism of glutamic acid modification on LDH at the microscopic scale. Additionally, the IRI analysis method revealed the mechanism of weak interaction between glutamic acid molecules and CrO42−. This study provides a detailed understanding of the intercalation mechanism involved in the amino acid modification of LDHs. It explains the adsorption mechanism of metal oxo-acid radicals by amino acid-modified LDHs from a theoretical perspective. The findings offer experiments and a theoretical basis for designing targeted adsorbents in the future. [ABSTRACT FROM AUTHOR]

A Pt-doped ceria nanocomposite with controlled morphology was prepared by one-pot hydrothermal synthesis method. The crystalline structure, texture and metal dispersion of the novel Pt@CeO 2 sample were studied by powder XRD, TEM, XPS, H 2 -TPR, N 2 -adsorption and CO chemisorption. The catalyst preparation procedure under hydrothermal conditions had significant impact on the Pt nanoparticles growth rate. Highly dispersed Pt species can be sufficiently anchored on the surface of nanopolyhedral CeO 2. The nanopolyhedral Pt@CeO 2 catalyst exhibits excellent catalytic activity for the water-gas shift reaction, suggesting an intimate interaction between Pt nanoparticles and nanopolyhedral CeO 2 that promotes the generation of additional active sites. Unlabelled Image • The Pt@CeO 2 nanocomposite was prepared by one-pot hydrothermal synthesis method. • Pt species was highly dispersed on the nanopolyhedral CeO 2 with intimate interaction. • The nanopolyhedral Pt@CeO 2 catalyst possess more active sites for WGS reaction. [ABSTRACT FROM AUTHOR]

[Display omitted] • The universal low carbon mass loading was used in capacitive deionization (CDI) for efficient deionized (DI) water production. • Partial desalination performance weakened with increasing carbon mass loading. • CDI cells using YEC-8–5.81 as electrodes produced DI water with a low conductivity of 1.89 μS/cm. • Carbons with a suitable micro- meso pore distribution and high specific capacitance may be a better choice. • 82.2% DI water recovery was achieved under stopped flow (SF) discharge mode. High-purity deionized (DI) water can be widely used in high-end manufacturing fields, but its efficient and energy-saving production is a huge challenge. Here, simple carbon mass loading control was developed for efficient DI water production via advanced capacitive deionization (CDI). Supercapacitor carbon (YEC-8) electrodes with diverse mass loading of 2.50, 5.81, 12.63 and 24.72 mg/cm2 were prepared for desalination. As expected, YEC-8–2.50 acquired the optimal CDI performance. High mass loading of 12.63 and 24.72 mg/cm2 not only caused an overt property drop but also serious wasted materials. Competitively, YEC-8–5.81 achieved a similar volumetric adsorption capacity (VAC) to YEC-8–2.50 as well as made up for the lack of total mass of YEC-8–2.50 and the resultant solution conductivity was as low as 1.89 μS/cm (grade III DI water). This strategy has been successfully extended to other carbon materials and carbons with suitable micro- meso pore distribution and high specific capacitance may be a better choice. Besides, the reverse effect of acetylene black (AB) mass on desalination was verified. To gain a high water recovery (W R), stopped flow (SF) discharge was introduced and realized a high W R of 82.2 %. Meanwhile, cycling tests indicated its splendid cycling stability. This study provides a universal direction for using low mass loading strategy for efficient DI water production. [ABSTRACT FROM AUTHOR]