Search

The development of efficient electrocatalysts based on Pt-free materials is a crucial step for the maturation of competitive water splitting technologies able to sustain the upcoming hydrogen-based economy. In this context, the present work optimizes a codeposition/annealing methodology to produce electrocatalytic layers for the hydrogen evolution reaction (HER) based on one of the most promising alternatives to Pt-based catalysts: nickel phosphides. A nickel–phosphorus solid solution is codeposited with red phosphorus microparticles and the obtained composites are annealed to promote interdiffusion and reaction between nickel and phosphorus. The experimentation carried out demonstrates that the properties of the final phosphide layers depend on the conditions employed in both the codeposition step and the annealing step. It is fundamental to evaluate and optimize the NiP/P codeposition process, and it is also important to understand the influence of annealing time and temperature on the microstructure and HER performance of the layers obtained. X-ray photoelectron spectroscopy (XPS) is employed to evaluate the phase composition at the surface, highlighting the presence of a top layer characterized by a Ni2P/Ni12P5 ratio significantly lower than the value found in the bulk of the coating. Annealed NiP/P layers are tested for HER in 0.5 M sulphuric acid solution. The tests demonstrate a clear correlation between the Ni2P/Ni12P5 ratio on the surface and the overpotential for HER. Coherently, when the outer Ni12P5-rich layer is mechanically removed, lower overpotentials are observed (169.5 mV vs. RHE for 10 mA cm−2).

Ultra-small gold nanoparticles (UAuNPs) are extremely interesting for applications in nanomedicine thanks to their good stability, biocompatibility, long circulation time and efficient clearance pathways. UAuNPs engineered with glycans (Glyco-UAuNPs) emerged as excellent platforms for many applications since the multiple copies of glycans can mimic the multivalent effect of glycoside clusters. Herein, we unravel a straightforward photo-induced synthesis of Glyco-UAuNPs based on a reliable and robust microfluidic approach. The synthesis occurs at room temperature avoiding the use of any further chemical reductant, templating agents or co-solvents. Exploiting

Boosting the hydrogen evolution reaction in an alkaline environment by enhancing the activity of Pd nanoparticles exploiting the unique redox activity of ZrO2.

Increasing efforts have been focused on development of novel therapeutic approaches based on a carrier mixed with polymeric microparticles (MPs) for promoting bioactive factors delivery. Polymers a...

Biological methods for mosquito larvae control are completely biodegradable and have null or limited effects on nontarget organisms. However, commercially available products have a low residual activity, with the consequent need for multiple applications that inevitably increase costs and the risk of resistance phenomena insurgence. Smart delivery systems made of hydrogels proved their efficacy in increasing the action duration of biolarvicides up to several months, but the lack of an efficient baiting mechanism to strongly attract the target pest remains a problem in practical applications. In this work, we investigated two novel hydrogel-based formulations of completely natural composition for baiting and killing larvae of

We report on the fabrication and electro-mechanical characterization of a nanocomposite system exhibiting anisotropic electrical response under the application of tactile compressive stresses (5 kPa) at low frequencies (0.1-1 Hz). The nanocomposite is based on a chemically cross-linked gel incorporating a highly conductive ionic liquid and surface functionalized barium titanate (BaTiO

Quantum dot solar cells are based on the concept of harvesting different parts of the solar light spectrum with a single, cheap semiconductor by simply changing the size of the nanoparticles. Of the many compositions explored, germanium is one of the most interesting as it has the major advantage of a large Bohr radius, which allows for the fabrication of larger particles. Moreover, germaniums possess very high optical absorption, and a small band gap give it free parameters to optimize the quantum dot solar cell. In a previous work, the germanium quantum dots were used in a Gratzel type solar cell containing an electrolyte, which is not desirable for applications. In this work instead, the n-doped germanium quantum dots were combined with a p-doped a-Si layer, making it the first all solid-state solar cell made from nanoparticles from a gas aggregation nanoparticle source. Remarkably, the effect of quantum confinement in both the germanium quantum dot assembled layer and a-Si was observed by peaks in the spectral response experiments. This work forms an important step toward realizing a germanium quantum dot based solar cell and studying quantum dot based solids.

The exploitation of self-assembled systems to improve the solubility of drugs is getting more and more attention. Among the different types of self-assembled biomaterials, peptides and in particular peptides containing non-coded amino acids (NCAPs) are promising because their use opens the door to more stable materials inducing increased stability to proteolysis. New classes of NCAP, Ac-Ala-X-Ala-Aib- AlaCONH2 (X ¼ alpha-aminoisobutyric acid (Aib) or X ¼ cyclopentane amino acid (Ac5c)) have been prepared and the correlation between the different secondary peptide structure and solvent (i.e. CD3CN, CD3OH, H2O/D2O) verified by NMR. Furthermore, the formation of a nanocolloidal system in water was deeply studied by DLS and the morphology of the obtained spherical aggregates with nanometric dimensions was assessed by TEM. Aib containing pentapeptide was selected for greater ease of synthesis. Its ability to encapsulate curcumin, as a model insoluble drug molecule, was investigated using fluorescence emission and confocal microscopy analyses. Two different approaches were used to study the interaction between curcumin and peptide aggregates. In the first approach peptide aggregates were formed in the presence of curcumin, while in the second approach curcumin was added to the already formed peptide aggregates. We succeeded in our challenge by using the second approach and 53.8% of added curcumin had been encapsulated.

Innovative, nanotechnologies-featuring dental materials for CAD/CAM applications are becoming available. However, the interaction with the oral environment poses critical challenges to their longevity. The present study evaluated specific physical-chemical properties and antimicrobial potential of a CAD/CAM graphene-doped resin before and after accelerated aging protocols.Graphene nanofibers (GNF)-doped (50 ppm) PMMA (GPMMA) and control PMMA CAD/CAM discs were used. Specimens underwent aging procedures of their bulk (thermo- and load-cycling) and surface (24 h-immersion in absolute ethanol), then they were tested for flexural strength, ultimate tensile strength, sorption/solubility, and methyl-methacrylate elution. Surface characterization included x-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, surface roughness, microhardness, and scanning electron microscopy (SEM). Adherence of Streptococcus mutans and Candida albicans, and biofilm formation (continuous-flow bioreactor) by the same strains and an artificial oral microcosm were investigated.GNF-doping improved the physical-chemical bulk properties of the PMMA resin. Surface aging reduced microhardness and increased the roughness of both test and control materials. Surfaces displayed signs of swelling and degradation at SEM. Microbiological data of non-aged surfaces showed that GNF-doping significantly reduced biofilm formation by all tested strains despite having no impact on microbial adherence. After aging, microbial adherence was higher on GPMMA surfaces, while biofilm formation was not promoted.GNF-doping improved the material's performance and influenced its antimicrobial potential. This strategy seems a valuable option to overcome the effects of surface degradation induced by aging on the antimicrobial potential of PMMA resin.

Compared to two-dimensional cell cultures, three-dimensional ones potentially allow recreating natural tissue environments with higher accuracy. The three-dimensional approach is being investigated in the field of tissue engineering targeting the reconstruction of various tissues, among which skeletal muscle. Skeletal muscle is an electroactive tissue which strongly relies upon interactions with the extracellular matrix for internal organization and mechanical function. Studying the optimization of myogenesis in vitro implies focusing on appropriate biomimetic stimuli, as biochemical and electrical ones. Here we present a three-dimensional polyurethane-based soft porous scaffold (porosity ~ 86%) with a Young's modulus in wet conditions close to the one of natural skeletal muscle tissue (~ 9 kPa). To study the effect of external stimuli on muscle cells, we functionalized the scaffold with extracellular matrix components (laminin and fibronectin) and observed an increase in myoblast proliferation over three days. Furthermore, the combination between laminin coating and electrical stimulation resulted in more spread and thicker myotubes compared to non-stimulated samples and samples receiving the single (non-combined) inputs. These results pave the way to the development of mature muscle tissue within three-dimensional soft scaffolds, through the combination of biochemical and electrical stimuli.

We employed chemical vapor deposition (CVD) from powder precursors aiming at large area growth of molybdenum ditellurides (MoTe2) thin films, with controlled allotropic 2H and 1T’ phases. This major outcome entails tuning the parametric conditions of the precursor fluxes during the deposition. Using a physical barrier, we induce a concentration gradient of the Te precursor thus enabling the control of the flux fluid-dynamics and the formation of a Te-rich or Te-poor environment. As a consequence, the allotropic phase repartition in the films turns out to be determined by the barrier-induced Te concentration, as clearly evidenced by statistical Raman scattering investigations. The effect of the physical barrier is also reflected in the shape of the crystallite population and in their log-normal areal distribution pointing out to a homogenous nucleation mode of the MoTe2 crystals. Our approach shows the selective allotropic phase control in the barrier-assisted CVD deposition of MoTe2 by adjusting the kinetics of the chemical reaction rather than with the use of growth surfactants.

Bioinspired soft robotics aims at reproducing the complex hierarchy and architecture of biological tissues within artificial systems to achieve the typical motility and adaptability of living organisms. The development of suitable fabrication approaches to produce monolithic bodies provided with embedded variable morphological and mechanical properties, typically encountered in nature, is still a technological challenge. Here we report on a novel manufacturing approach to produce three-dimensional functionally graded hydrogels (3D-FGHs) provided with a controlled porosity gradient conferring them variable stiffness. 3D-FGHs are fabricated by means of a custom-designed liquid foam templating (LFT) technique, which relies on the inclusion of air bubbles generated by a blowing agent into the monomer-based template solution during ultraviolet-induced photopolymerization. The 3D-FGHs' apparent Young's modulus ranges from 0.37 MPa (bulky hydrogel region) to 0.09 MPa (highest porosity region). A fish-shaped soft swimmer is fabricated to demonstrate the feasibility of the LFT technique to produce bioinspired robots. Mobility tests show a significant improvement in terms of swimming speed when the robot is provided with a graded body. The proposed manufacturing approach constitutes an enabling solution for the development of macroscopic functionally graded hydrogel-based structures usable in biomimetic underwater soft robotics applications.

The cell/microenvironment interface is the starting point of integrin-mediated mechanotransduction, but many details of mechanotransductive signal integration remain elusive due to the complexity of the involved (extra)cellular structures, such as the glycocalyx.We used nano-bio-interfaces reproducing the complex nanotopographical features of the extracellular matrix to analyse the glycocalyx impact on PC12 cell mechanosensing at the nanoscale (e.g., by force spectroscopy with functionalised probes). Our data demonstrates that the glycocalyx configuration affects spatio-temporal nanotopography-sensitive mechanotransductive events at the cell/microenvironment interface. Opposing effects of glycocalyx removal were observed, when comparing flat and specific nanotopographical conditions. The excessive retrograde actin flow speed and force loading are strongly reduced on certain nanotopographies upon removal of the native glycocalyx, while on the flat substrate we observe the opposite trend.Our results highlight the importance of the glycocalyx configuration in a molecular clutch force loading-dependent cellular mechanism for mechanosensing of microenvironmental nanotopographical features.

Subnanometer copper tetramer–zirconia catalysts turn out to be highly efficient for CO2 hydrogenation and its conversion to methane. The cluster size and substrate morphology are controlled to optimize the catalytic performance. The two types of zirconia supports investigated are prepared by atomic layer deposition (∼3 nm thick film) and supersonic cluster beam deposition (nanostructured film, ∼100 nm thick). The substrate plays a crucial role in determining the activity of the catalyst as well as its cyclability over repeated thermal ramps. A temperature-programmed reaction combined with in situ X-ray characterization reveals the correlation between the evolution in the oxidation state and catalytic activity. Ex situ photoelectron spectroscopy indicates Cu clusters with stronger interactions with the nanostructured film, which can be the cause for the higher activity of this catalyst. Density functional theory calculations based on the Cu4O2 cluster supported on a ZrOx subunit reveal low activation barriers and provide mechanism for CO2 hydrogenation and its conversion to methane. Altogether, the results show a new way to tune the catalytic activity of CO2 hydrogenation catalysts through controlling the morphology of the support at the nanoscale.

Germanium quantum dots are very interesting for applications such as solar cells, photodetectors, and light emitters because their small bandgap can be tuned over a wide energy range by changing the particle size. One obstacle to applications is the presence of defects, both in the interior and at the surface of the nanoparticles. The defects function as nonradiative recombination centers or trap charge carriers, which will hinder further optical performance. Introducing hydrogen, as employed in a-Si:H solar cells, has proven to be a good method to counter such detrimental defect effects. In this work, germanium quantum dots were fabricated by an ultraclean, vacuum-based nanoparticle reactor in which hydrogen was supplied during growth. Optical spectroscopy of the a-Ge:H quantum dots, together with Raman and X-ray photoelectron spectroscopy, revealed a direct bandgap and that the presence of hydrogen resulted in amorphous Ge:H quantum dots. These a-Ge:H quantum dots are a step forward toward reducing charge carrier recombination in quantum dot solar cells.

Ionic liquids are employed in energy storage/harvesting devices, in catalysis and biomedical technologies, due to their tunable bulk and interfacial properties. In particular, the wettability and the structuring of the ionic liquids at the interface are of paramount importance for all those applications exploiting ionic liquids tribological properties, their double layer organization at electrified interfaces, and interfacial chemical reactions. Here we report an experimental investigation of the wettability and organization at the interface of an imidazolium-based ionic liquid ([Bmim][NTf2]) and gold surfaces, that are widely used as electrodes in energy devices, electronics, fluidics. In particular, we investigated the role of the nanostructure on the resulting interfacial interactions between [Bmim][NTf2] and atom-assembled or cluster-assembled gold thin films. Our results highlight the presence of the solid-like structured ionic liquid domains extending several tens of nanometres far from the gold interfaces, and characterized by different lateral extension, according to the wettability of the gold nanostructures by the IL liquid-phase.

Embryonic and pluripotent stem cells hold great promise in generating β-cells for both replacing medicine and novel therapeutic discoveries in diabetes mellitus. However, their differentiation in vitro is still inefficient, and functional studies reveal that most of these β-like cells still fail to fully mirror the adult β-cell physiology. For their proper growth and functioning, β-cells require a very specific environment, the islet niche, which provides a myriad of chemical and physical signals. While the nature and effects of chemical stimuli have been widely characterized, less is known about the mechanical signals. We here review the current status of knowledge of biophysical cues provided by the niche where β-cells normally live and differentiate, and we underline the possible machinery designated for mechanotransduction in β-cells. Although the regulatory mechanisms remain poorly understood, the analysis reveals that β-cells are equipped with all mechanosensors and signaling proteins actively involved in mechanotransduction in other cell types, and they respond to mechanical cues by changing their behavior. By engineering microenvironments mirroring the biophysical niche properties it is possible to elucidate the β-cell mechanotransductive-regulatory mechanisms and to harness them for the promotion of β-cell differentiation capacity in vitro.

Mechanosensing, the ability of cells to perceive and interpret the microenvironmental biophysical cues (such as the nanotopography), impacts strongly on cellular behaviour through mechanotransductive processes and signalling. These events are predominantly mediated by integrins, the principal cellular adhesion receptors located at the cell/extracellular matrix (ECM) interface.Because of the typical piconewton force range and nanometre length scale of mechanotransductive interactions, achieving a detailed understanding of the spatiotemporal dynamics occurring at the cell/microenvironment interface is challenging; sophisticated interdisciplinary methodologies are required. Moreover, an accurate control over the nanotopographical features of the microenvironment is essential, in order to systematically investigate and precisely assess the influence of the different nanotopographical motifs on the mechanotransductive process.In this framework, we were able to study and quantify the impact of microenvironmental nanotopography on early cellular adhesion events by means of adhesion force spectroscopy based on innovative colloidal probes mimicking the nanotopography of natural ECMs.These probes provided the opportunity to detect nanotopography-specific modulations of the molecular force loading dynamics and integrin clustering at the level of single binding events, in the critical time window of nascent adhesion formation. Following this approach, we found that the nanotopographical features are responsible for an excessive force loading in single adhesion sites after 20 – 60 s of interaction, causing a drop in the number of adhesion sites. However, by manganese treatment we demonstrated that the availability of activated integrins is a critical regulatory factor for these nanotopography-dependent dynamics.

Water splitting will be one of the most strategic techniques in the upcoming hydrogen-based economy. In this context, the development of efficient and low-cost Pt-free electrocatalysts is crucial t...

The irradiation with photons or electrons can dramatically influence the chemical stability of a molecule, either free or adsorbed on a surface, inducing its fragmentation or desorption. We revisit here the exostimulated dissociation of CO, a prototypical case, choosing hcp thin cobalt films as model support. Intense, microfocused soft X-rays or electron beams are used to locally stimulate CO dissociation. Fast-XPS gives direct access to the adsorbates' chemical state and coverage during irradiation, enabling the kinetics of the process to be monitored in real time. The energy-dependent cross sections for photon and electron stimulated molecular dissociation and desorption are estimated for a fixed initial CO coverage of 1 / 3 ML. In the soft X-ray regime, the desorption channel always prevails over dissociation and is significantly enhanced above the O K edge. The relative dissociation probability increases steadily with increasing photon energy, reaching 30% at 780 eV. Furthermore, we show that low energy electrons in the range 50 to 200 eV dissociate CO more efficiently than X-rays. The prolonged irradiation of the Co surface in CO ambient is found to produce a continuous increase of the carbon coverage, initially promoting the formation of carbides and subsequently accumulating sp 2 carbon on the surface. Far from being a detrimental effect, the CO stimulated dissociation can be exploited to lithographically graft carbon-rich microscopic patterns on Co, with resolution well into the nanometer scale. A brief thermal treatment following irradiation results in the formation of a graphitic carbon overlayer, which effectively protects Co from oxidation upon exposure to ambient conditions, preserving its out-of-plane magnetic anisotropy and domain configuration.

We present the synthesis and the characterization of a novel cellulose-based electroactive hydrogel obtained through a simple water-based process. Its swelling and electroactive properties are here studied especially in low salinity water solutions. By combining smart materials and three-dimensional printing technique, we assessed that hydrogels can be shaped as natural algae and their motion can be controlled with electric signals to mimic natural seaweed movements under the effect of water flow. This could constitute a first step toward the development of hybrid habitats where artificial smart algae could cohabit with real living organisms or microorganisms.

We report on the proof of principle of a scalable method for writing the magnetic state by electron-stimulated molecular dissociative adsorption on ultrathin Co on Re(0001). Intense microfocused low-energy electron beams are used to promote the formation of surface carbides and graphitic carbon through the fragmentation of carbon monoxide. Upon annealing at the CO desorption temperature, carbon persists in the irradiated areas, whereas the clean surface is recovered elsewhere, giving origin to chemical patterns with nanometer-sharp edges. The accumulation of carbon is found to induce an in-plane to out-of-plane spin reorientation transition in Co, manifested by the appearance of striped magnetic domains. Irradiation at doses in excess of 1000 L of CO followed by ultrahigh vacuum annealing at 380 °C determines the formation of a graphitic overlayer in the irradiated areas, under which Co exhibits out-of-plane magnetic anisotropy. Domains with opposite magnetization are separated here by chiral Neél walls. Our fabrication protocol adds lateral control to spin reorientation transitions, permitting to tune the magnetic anisotropy within arbitrary regions of mesoscopic size. We envisage applications in the nano-engineering of graphene-spaced stacks exhibiting the desired magnetic state and properties.

Tendon tears are a relevant concern for today’s national health systems because of their social impact and high recurrence rate. The current gold standard for fixing tendon tears is surgical repair; however, this strategy is not able to fully re-establish tendon integrity and functionality. Tissue engineering approaches aim at promoting tissue regeneration by delivering the opportune signals to the injured site combining biomaterials, cells and biochemical cues. Electrospinning is currently one of the most versatile polymer processing techniques that allows manufacturing of nano- and micro-fibres substrates. Such fibrous morphology is deemed to be an ideal substrate to convey topographical cues to cells. Here we evaluated the potential of polycaprolactone processed by means of electrospinning technology for tendon tissue engineering. Fibrous free-of-defects substrate with random and aligned fibres were successfully fabricated. Rat tenocytes were used to assess the cytocompatibility of the substrates for application as tendon tissue engineered devices. Tenocytes were able to proliferate and adapt to the substrates topography acquiring an elongated morphology, which is the precondition for oriented collagen deposition, when seeded on aligned fibres. Real time Polymerase Chain Reaction (Rt-PCR) also revealed the overall maintenance of tenocyte phenotype over 7 days culture. To verify suitability for in vivo implantation, the level of inflammatory cytokine genes expressed by THP-1 cells cultured in presence of electrospun polycaprolactone substrates was evaluated. Inflammatory response was limited. The novel preliminary in vitro work presented herein showing tenocytes compatibility and limited inflammatory cytokines synthesis suggests that electrospun polycaprolactone may be taken into consideration as substrate for tendon healing applications.

Studies on the optical absorbance spectra of Fricke xylenol orange gel dosimeters were performed, in the wavelength range from 300 nm to 800 nm, in order to highlight some particular characteristics that can affect the achievable precision. The spectra are different mainly due to the different types of xylenol orange that was used and to a lower extent due to the different gelling agents (agarose or gelatine). The characteristic of variation of absorbance spectra versus dose, however, are similar in the various cases and can explain some peculiarities, as apparent effects of dose threshold. Changes of spectral shapes appear over the time after irradiation. Magnetic resonance measurements performed at various times after irradiation only reveal the slow changes due to the auto-oxidation effect, proving therefore that the modality of chelation of ferric ions by xylenol orange can affect the observed changes in the optical absorbance spectra.

This study presents an innovative method for the synthesis of polymeric nanoparticles (NPs) for central nervous system (CNS) targeting. The method is based on Ultraviolet light (UV)-induced crosslinking of diacrylamide-terminated oligomers of poly(amidoamine)s (PAAs), a widely used class of synthetic polymers in biomedical field research, especially in drug delivery thanks to their excellent biocompatibility and controlled biodegradability. Previous attempts aiming at preparing PAA-based NPs by self-assembly were challenged by lack of structural stability and consequently their early degradation and premature drug release. Here, the UV-induced crosslinked PAA NPs demonstrated to overcome main disadvantages of the self-assembled ones, as they showed improved stability and controlled release properties. Besides the remarkable efficiency to produce monodisperse and stable PAA NPs, the UV-induced crosslinking method is featured by great versatility and low environmental impact, since it does not require use of organic solvents and multiple purification steps. The capability of PAA NPs to encapsulate a fluorescently labelled model protein was experimentally demonstrated in this study. Cell culture experiments showed that PAA NPs were biocompatible and highly permeable across an in vitro blood-brain barrier model, thus highlighting their great potential as drug delivery vectors for CNS delivery.

The development of smart prosthetics, scaffolds, and biomaterials for tissue engineering and organ-on-a-chip devices heavily depends on the understanding and control of biotic/abiotic interfaces. In recent years, the nanometer scale emerged as the predominant dimension for processes impacting on protein adsorption and cellular responses on surfaces. In this context, the extracellular matrix (ECM) can be seen as the prototype for an intricate natural structure assembled by nanoscale building blocks forming highly variable nanoscale configurations, dictating cellular behavior and fate. How exactly the ECM nanotopography influences mechanotransduction, that is, the cellular capacity to convert information received from the ECM into appropriate responses, remains partially understood due to the complexity of the involved biological structures, limiting also the attempts to artificially reproduce the nanoscale complexity of the ECM. In this Account, we describe and discuss our strategies for the development of an efficient and large-scale bottom-up approach to fabricate surfaces with multiscale controlled disorder as substrates to study quantitatively the effect of nanoscale topography on biological entities. Our method is based on the use of supersonic cluster beam deposition (SCBD) to assemble, on a substrate, neutral clusters produced in the gas phase and accelerated by a supersonic expansion. The assembling of clusters in the ballistic deposition regime follows simple scaling laws, allowing the quantitative control of surface roughness and asperity layout over large areas. Due to their biocompatibility, we focused on transition metal oxide nanostructured surfaces assembled by titania and zirconia clusters. We demonstrated the engineering of structural and functional properties of the cluster-assembled surfaces with high relevance for interactions at the biotic/abiotic interface. We observed that isoelectric point and wettability, crucial parameters for the adhesion of biological entities on surfaces, are strongly influenced and controlled by the nanoscale roughness. By developing a high-throughput method (protein surface interaction microarray, PSIM), we characterized quantitatively the capacity of the nanostructured surfaces to adsorb proteins, showing that with increasing roughness the adsorption rises beyond what could be expected by the increase in specific area, paralleled by an almost linear decrease in protein binding affinity. We also determined that the spatial layout of the surface asperities effectively perceived by the cells mimics at the nanoscale the topographical ECM characteristics. The interaction with these features consequently regulates parameters significant for cell adhesion and mechanotransductive signaling, such as integrin clustering, focal adhesion maturation, and the correlated cellular mechanobiology, eventually impacting the cellular program and differentiation, as we specifically showed for neuronal cells.

Although many details remain still elusive, it became increasingly evident in recent years that mechanosensing of microenvironmental biophysical cues and subsequent mechanotransduction are strongly involved in the regulation of neuronal cell development and functioning. This review gives an overview about the current understanding of brain and neuronal cell mechanobiology and how it impacts on neurogenesis, neuronal migration, differentiation, and maturation. Therein; we are focussing particularly on the events in the cell/microenvironment interface and the decisive extracellular matrix (ECM) parameters (i.e. rigidity and nanometric spatial organisation of adhesion sites) that modulate integrin adhesion complex-based mechanosensing and mechanotransductive signalling. It will also be outlined how biomaterial approaches mimicking essential ECM features help to understand these processes and how they can be used to control and guide neuronal cell behaviour by providing appropriate biophysical cues. In addition, principal biophysical methods will be highlighted that have been crucial for the study of neuronal mechanobiology.

The Fricke gels (FG) composition has been modified over the years in order to improve their dosimetric characteristic for spatial dose evaluation in radiotherapy. Some problems, in particular those related to the diffusion of ferric ions in the gel matrix, have limited the clinical use of FG and still represent significant challenges for the scientific community working in the field of gel dosimetry. In this work, FG based on poly-vinyl alcohol (PVA) as the gelling agent, glutaraldehyde (GTA) as a cross-linker and FG based on gelatine loaded with silicate nano-clay (laponite) were developed with the aim to overcome the diffusion drawbacks affecting the traditional FG. Neither the sensitivity to the radiation dose nor the diffusion coefficient were significantly altered by the addition of laponite into the Fricke xylenol orange gel formulation employed. By contrast, lower diffusion rates were obtained with PVA-GTA gels, suggesting that this matrix could have a promising use in the field of 3D dosimetry.The Fricke gels (FG) composition has been modified over the years in order to improve their dosimetric characteristic for spatial dose evaluation in radiotherapy. Some problems, in particular those related to the diffusion of ferric ions in the gel matrix, have limited the clinical use of FG and still represent significant challenges for the scientific community working in the field of gel dosimetry. In this work, FG based on poly-vinyl alcohol (PVA) as the gelling agent, glutaraldehyde (GTA) as a cross-linker and FG based on gelatine loaded with silicate nano-clay (laponite) were developed with the aim to overcome the diffusion drawbacks affecting the traditional FG. Neither the sensitivity to the radiation dose nor the diffusion coefficient were significantly altered by the addition of laponite into the Fricke xylenol orange gel formulation employed. By contrast, lower diffusion rates were obtained with PVA-GTA gels, suggesting that this matrix could have a promising use in the field of 3D dosimetry.

We report on the fabrication and electro-mechanical characterization of a nanocomposite system exhibiting anisotropic electrical response under the application of tactile compressive stresses (5 kPa) at low frequencies (0.1-1 Hz). The nanocomposite is based on a chemically cross-linked gel incorporating a highly conductive ionic liquid and surface functionalized barium titanate (BaTiO 3 ) ferroelectric nanoparticles. The system was engineered to respond to mechanical stimulations by combining piezoionic and piezoelectric activity, generating electric charge due to a redistribution of the mobile ions across the polymer matrix and to the presence of the electrically polarized ceramic nanoparticles, respectively. The nanocomposite response was characterized in a quasi-static regime using a custom-designed apparatus. The results obtained showed that the combination of both piezo-effects led to output voltages up to 8 mV and anisotropy in the response. This allows to discriminate the sample orientation with respect to the load direction by monitoring the phase and amplitude modulation of the output signal. The integration of cluster-assembled gold electrodes produced by Supersonic Cluster Beam Deposition (SCBD) was also performed, enabling to enhance the charge transduction efficiency by a factor of 10, compared to the bare nanocomposite. This smart piezoionic/piezoelectric nanocomposite represents an interesting solution for the development of soft devices for discriminative touch sensing and objects localization in physically unstructured environments.